If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, by setting TESTTIME() to a particular date and time, you
can test whether a dialplan correctly branches as was intended. This was
developed after recent questions on the -users list on how to test their
holiday dialplan logic.
(closes issue #16464)
Reported by: tilghman
Patches:
20100112__issue16464.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/458/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the process of removing an audiohook from one channel
and attaching it to another the audiohook's status is updated
to DONE and then back to whatever it was previously. Typically
updating the status after setting it to DONE is not a good idea
because DONE can trigger unrecoverable audiohook destruction
events... because of this a conditional check was added to
audiohook_update_status to explicitly prevent the audiohook
from ever changing after being set to DONE. It was this check
that prevented audiohook inherit from work properly though.
Now ast_audiohook_move_by_source is treated as a special exception,
as the audiohook must be returned to its previous status after
attaching it to the new channel. This is only a safe operation
because the audiohook's lock is held the entire time, otherwise
this could cause trouble.
(closes issue #16522)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_test_status_update() function is defined in test.h.
When TEST_FRAMEWORK is not enabled a macro is defined as a no-op
place holder for this function. The macro did not contain
the correct number of arguments. This caused a compile error.
Much thanks to wdoekes for reporting the issue and supplying the
patch!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r237405 | tilghman | 2010-01-04 12:19:00 -0600 (Mon, 04 Jan 2010) | 16 lines
Add a flag to disable the Background behavior, for AGI users.
This is in a section of code that relates to two other issues, namely
issue #14011 and issue #14940), one of which was the behavior of
Background when called with a context argument that matched the current
context. This fix broke FreePBX, however, in a post-Dial situation.
Needless to say, this is an extremely difficult collision of several
different issues. While the use of an exception flag is ugly, fixing all
of the issues linked is rather difficult (although if someone would like
to propose a better solution, we're happy to entertain that suggestion).
(closes issue #16434)
Reported by: rickead2000
Patches:
20091217__issue16434.diff.txt uploaded by tilghman (license 14)
20091222__issue16434__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: rickead2000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236585 | seanbright | 2009-12-28 10:12:08 -0500 (Mon, 28 Dec 2009) | 7 lines
Try a test compile to see if PTHREAD_ONCE_INIT requires extra braces.
There was conditional code (based on build platform) to optioinally wrap
PTHREAD_ONCE_INIT in braces that was removed since it is fixed in newer versions
of Solaris/OpenSolaris, but I am still running into it on Solaris 10 x86 so add
a configure-time check for it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines
Correct CDR dispositions for BUSY/FAILED
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The option is global and currently the acceptable values as noted in the sample
config are accept or deny.
(closes issue #15228)
Reported by: lp0
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Classes are now tracked past removal from the core container, and module
removal is actively prevented until all references are freed.
* A hanging reference stored in the channel has been removed. This could have
caused a mismatch and the music state not properly cleared, if two or more
reloads occurred between MOH being stopped and MOH being restarted.
* In certain circumstances, duplicate classes were possible.
* A race existed at reload time between a process being killed and the thread
responsible for reading from the related pipe respawning that process.
* Several reference counts have also been corrected. At least one could have
caused deleted classes to stick around forever, consuming resources. This
originally manifested as MOH external processes that were not killed at
reload time.
(closes issue #16279, closes issue #16207)
Reported by: parisioa, dcabot
Patches:
20091202__issue16279__2.diff.txt uploaded by tilghman (license 14)
Tested by: parisioa, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Allow users of UDPTL stack to associate a character-string tag with a UDPTL
session, so that log/error/debug messages generated by the UDPTL stack can
be 'connected' to the endpoint that caused them to be generated.
2) Improve comments (and process) of calculating the far end's maximum IFP size
when redundancy mode is in use for error correction.
3) When an IFP larger than the calculated 'far max IFP' size is presented for
writing, truncate it rather than putting in the buffer and allowing the buffer
to overflow; this will cause the ends to retrain to a lower bit rate that
produces IFPs of an appropriate size if possible, and if not possible, the
FAX transfer will fail completely. In these cases, it is due to the one endpoint
supplying a T38FaxMaxDatagram value that is improperly calculated and is
too low to be of use; we have configuration options available to override
this behavior.
4) Eliminate use of T38FaxMaxDatagram value in udptl.conf; it is no longer
needed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add REPLACE function, which searches a given variable for a set of
characters and replaces each with a given character.
* Add PASSTHRU function, which passes a literal string back, like a NoOp for
functions. Intent is to be able to specify a literal string to another
function that takes a variable name as an argument.
* Let the array manipulation functions work with dialplan functions, in
addition to variables. This allows the array manipulation functions to
modify ASTDB and ODBC backends, assuming the func_odbc configuration has
both read and write functions.
(closes issue #15223)
Reported by: ajohnson
Patches:
20091112__issue15223.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch, originally submitted by jozza, enables custom modules to send actions to AMI
and receive messages from AMI via a hook interface. Included is a simple test module to
illustrate the interface.
(closes issue #14635)
Reported by: jozza
Review: https://reviewboard.asterisk.org/r/412/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a side project I've been poking at this week. The intent is to discuss
Asterisk architecture in a top down fashion to help new developers understand how
Asterisk is put together. There is a ton of stuff to write about, so this will
just continue to evolve over time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added documentation on how to create a local git repository from
SVN. This documentation was added via doxygen.
(closes issue #15814)
Reported by: tzafrir
Patches:
git-asterisk-howto uploaded by tzafrir (license 46)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What this patch fixes
1.Moves sip TCP/TLS connection setup into the TCP helper thread:
Connection setup takes awhile and before this it was being
done while holding the monitor lock.
2.Moves TCP/TLS writing to the TCP helper thread: Through the
use of a packet queue and an alert pipe, the TCP helper thread
can now be woken up to write data as well as read data.
3.Locking error: sip_xmit returned an XMIT_ERROR without giving
up the tcptls_session lock. This lock has been completely removed
from sip_xmit and placed in the new sip_tcptls_write() function.
4.Memory leak: When creating a tcptls_client the tls_cfg was alloced
but never freed unless the tcptls_session failed to start. Now the
session_args for a sip client are an ao2 object which frees the
tls_cfg on destruction.
5.Pointer to stack variable: During sip_prepare_socket the creation
of a client's ast_tcptls_session_args was done on the stack and
stored as a pointer in the newly created tcptls_session. Depending
on the events that followed, there was a slight possibility that
pointer could have been accessed after the stack returned. Given
the new changes, it is always accessed after the stack returns
which is why I found it.
Notable code changes
1.I broke tcptls.c's ast_tcptls_client_start() function into two
functions. One for creating and allocating the new tcptls_session,
and a separate one for starting and handling the new connection.
This allowed me to create the tcptls_session, launch the helper
thread, and then establish the connection within the helper thread.
2.Writes to a tcptls_session are now done within the helper thread.
This is done by using an alert pipe to wake up the thread if new
data needs to be sent. The thread's sip_threadinfo object contains
the alert pipe as well as the packet queue.
3.Since the threadinfo object contains the alert pipe, it must now be
accessed outside of the helper thread for every write (queuing of a
packet). For easy lookup, I moved the threadinfo objects from a
linked list to an ao2_container.
(closes issue #13136)
Reported by: pabelanger
Tested by: dvossel, whys
(closes issue #15894)
Reported by: dvossel
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/380/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Jeff Peeler
Russell Bryant
Olle Johansson
David Vossel
Sean Bright
Kevin P. Fleming
Matthew Nicholson
David Brooks
Richard Mudgett
Leif Madsen