https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r54204 | russell | 2007-02-13 13:42:00 -0600 (Tue, 13 Feb 2007) | 5 lines
If we fail to create the SIP socket, then return -1 from reload_config() so
that load_module() will return AST_MODULE_LOAD_DECLINE. Otherwise, the console
will just get spammed with error messages every time chan_sip tries to send a
message.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This replaces the older, broken, implementation where a setting in
[general] did not do anything and the [peer] part was broken.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53810 | russell | 2007-02-09 18:35:09 -0600 (Fri, 09 Feb 2007) | 24 lines
Merge team/russell/sla_rewrite
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Merged revisions 53109 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53109 | oej | 2007-02-02 01:24:03 +0100 (Fri, 02 Feb 2007) | 4 lines
Disable the direct p2p RTP call setup in SIP. You can enable it in sip.conf, but it is now
considered experimental until we solve the AST_CONTROL_ANSWER with payload and videocaps
stuff.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53085 | oej | 2007-02-01 22:05:34 +0100 (Thu, 01 Feb 2007) | 4 lines
- Clean INC_COUNT flag when we decrement call counter
- If it's still set at time of dialog destruction, make sure we decrement the device call counter properly
before we destroy the dialog
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you set call limit and busy limit, chan_sip will indicate BUSY for a device
that has reached the busy limit and allow calls up to the call limit, allowing
for call transfers (that generate a new call).
If you only set call limit, chan_sip will not indicate BUSY until that limit
is filled.
This affects SIP subscriptions, call queues and manager applications.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52952 | russell | 2007-01-30 13:33:12 -0600 (Tue, 30 Jan 2007) | 5 lines
Only set the DTMF flag on the rtp structure if the DTMF mode is actually
RFC2833, not just that it is not INFO. This makes it get set for inband DTMF
as well, which is not valid.
(issue #8936)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51328 | russell | 2007-01-19 13:08:25 -0600 (Fri, 19 Jan 2007) | 5 lines
Fix VLDTMF support in chan_gtalk. AST_FRAME_DTMF and AST_FRAME_DTMF_END are
actually the same thing. So, a digit would have been interpreted incorrectly
here. Since the channel driver will always have the begin and end callbacks
called for a digit, only support the button-down and button-up messages.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51204 | russell | 2007-01-17 16:09:52 -0600 (Wed, 17 Jan 2007) | 4 lines
Instead of dividing the offset by 2 directly, make it more clear that the
offset is being scaled by the size of the elements in the buffer.
(Inspired by a discussing on the asterisk-dev list about this code)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r51087 | file | 2007-01-16 00:55:23 -0500 (Tue, 16 Jan 2007) | 10 lines
Merged revisions 51085 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r51085 | file | 2007-01-16 00:53:31 -0500 (Tue, 16 Jan 2007) | 2 lines
Add none as a valid callgroup/pickupgroup option. I consider it a bug that it would inherit it all the way down and not have any way to reset it to nothing - so that's why it is in 1.2. (issue #8296 reported by gkloepfer)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
selectable by how it is called in the dialplan. This allows a speaker
system hooked up to the soundcard to be used for both ring notification,
as well as paging.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50468 | file | 2007-01-11 00:53:09 -0500 (Thu, 11 Jan 2007) | 2 lines
Remove check for channel state as it can definitely be something other then ring, and also clean up the code a bit. This should solve the parking issues and maybe some attended transfer issues people have been seeing.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50466 | file | 2007-01-11 00:19:39 -0500 (Thu, 11 Jan 2007) | 2 lines
Add support to see whether NAT was detected (yay symmetric RTP) and also add a check in chan_sip so that if NAT has been detected and the reinvite behind nat option has been turned off, then just do partial bridge. (issue #8655 reported by mnicholson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50006 | oej | 2007-01-08 15:26:14 +0100 (Mon, 08 Jan 2007) | 11 lines
Issue #8677 - Handle failure of T.38 re-invite
This is not a fix, but adding an error message to tell the admin that
we have a bad configuration. We should not send T.38 re-invites to devices
that can't handle it (with the current architecture where you have to
hard-code t.38 support per device).
To really fix this, we need to figure out a way to tell the incoming
call that the re-invite failed, so we can signal failure on that
end and go back to the original call.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49581 | kpfleming | 2007-01-04 17:50:15 -0600 (Thu, 04 Jan 2007) | 3 lines
create the IAX2 processing threads as background threads so they will use smaller stacks
when we create a dynamic thread, put it on the dynamic_list right away so we don't lose track of it
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49457 | kpfleming | 2007-01-04 12:05:47 -0600 (Thu, 04 Jan 2007) | 2 lines
make building of codec_gsm against the system GSM library actually work
........
r49460 | kpfleming | 2007-01-04 12:16:40 -0600 (Thu, 04 Jan 2007) | 2 lines
don't define this type either if LOW_MEMORY is enabled
........
r49461 | kpfleming | 2007-01-04 12:17:01 -0600 (Thu, 04 Jan 2007) | 2 lines
don't do frame header caching in the core if LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r49313 | crichter | 2007-01-03 10:06:50 +0100 (Mi, 03 Jan 2007) | 41 lines
Merged revisions 48319,48321,48467,48552,48576,49135,49303 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r48319 | crichter | 2006-12-06 15:35:25 +0100 (Mi, 06 Dez 2006) | 1 line
changed a few debugs to higher debug levels
........
r48321 | crichter | 2006-12-06 16:48:45 +0100 (Mi, 06 Dez 2006) | 1 line
added the export and import of the MISDN_ADDRESS_COMPLETE Variable to inidcate wether the extension is already completely dialed or if there might come additional digits by information elements. also added some docs for that.
........
r48467 | crichter | 2006-12-14 14:03:49 +0100 (Do, 14 Dez 2006) | 1 line
removed FIXUP state. added check for channel allocation conflict when we create a setup while the other site creates a setup on the same channel, besides the check we resolve this conflict.
........
r48552 | crichter | 2006-12-18 11:19:39 +0100 (Mo, 18 Dez 2006) | 1 line
when our PTP Partner sends us a SETUP with a preselected channel we just accept it, even when we're NT. added some checks for segfaults.
........
r48576 | crichter | 2006-12-19 14:08:51 +0100 (Di, 19 Dez 2006) | 1 line
when we reject a channel, because it's in use already, we shouldn't process the setup anymore. made the channel allocation a bit easier and more understandable, removed a few unused lines
........
r49135 | crichter | 2007-01-02 11:07:22 +0100 (Di, 02 Jan 2007) | 1 line
added check for channel ranges in the set/empty channel functions. set pmp_l1_check default to no. added misdn restart pid cli command. added cleaning of channel when we send a RELEASE_COMPLETE.
........
r49303 | crichter | 2007-01-03 09:24:00 +0100 (Mi, 03 Jan 2007) | 9 lines
* Added check for bridging in misdn_call to avoid setting echocancellation
when 2 mISDN channels are involved and when bridging is set. That lead
to a kernel panic before under different situations, because we switched
about 2 times between hardware bridging and echocancelation
* readded MISDN_URATE variable which got lost before, this should make app_v110
work again
* fixed typo
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49259 | file | 2007-01-02 20:19:53 -0500 (Tue, 02 Jan 2007) | 2 lines
Check pvt structure presence before passing to send_command. This gets rid of the irritating message about a packet without pvt structure. This happens because the scheduled item is getting cancelled at almost the exact moment it is getting executed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49102 | kpfleming | 2007-01-01 17:34:35 -0600 (Mon, 01 Jan 2007) | 2 lines
check specifically for VLDTMF and transcoding support in the system's Zaptel installation, and make only the modules that need those features dependent on them (this will allow building the other Zaptel-using parts of Asterisk against older versions of Zaptel or those on other platforms that haven't caught up yet to the Linux version)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Fredrickson
Olle Johansson
Russell Bryant
Paul Cadach
Kevin P. Fleming
Jason Parker
Joshua Colp
Christian Richter
Luigi Rizzo
Dwayne M. Hubbard
Tilghman Lesher
Matt O'Gorman