In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A thread storage variable was being freed incorrectly, which
resulted in a double free if two queries were made in the same thread.
(closes issue #16011)
Reported by: cristiandimache
Patches:
issue16011.diff uploaded by dvossel (license 671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@229093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_console accessed pvts after deallocation.
* cdr_mysql stored a pointer that was freed by realloc()
* The module loader did not check usecount on shutdown, which led to chan_iax2
reading a timer that was already unloaded.
* The event subsystem sometimes creates an event with no IEs. Due to a corner
condition, the code would read beyond the memory boundary.
* res_pktccops did not correctly check whether its monitor thread was started.
(closes issue #16062)
Reported by: alexanderheinz
Patches:
20091109__issue16062.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r227944 | jpeeler | 2009-11-04 17:47:08 -0600 (Wed, 04 Nov 2009) | 14 lines
Fix incorrect filename comparsion after monitor file change
The logic to detect if a requested file is indeed a different file from the
current file was incorrect. The main issue being confusion of the use of
filename_base which was previously set without pathing information and then
compared to another full path. Robust file comparison logic has been added
to properly check if two files are the same even if symlinks are used.
(closes issue #15313)
Reported by: caspy
Patches:
20091103__issue15313__1.4.diff.txt uploaded by jpeeler (license 325)
but mostly tilghman's work
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a side project I've been poking at this week. The intent is to discuss
Asterisk architecture in a top down fashion to help new developers understand how
Asterisk is put together. There is a ton of stuff to write about, so this will
just continue to evolve over time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224670 | kpfleming | 2009-10-19 18:44:07 -0500 (Mon, 19 Oct 2009) | 7 lines
Correct timestamp calculations when RTP sample rates over 8kHz are used.
While testing some endpoints that support 16kHz and 32kHz sample rates, some
log messages were generated due to calc_rxstamp() computing timestamps in a way
that produced odd results, so this patch sanitizes the result of the
computations.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CONFIRMED status doesn't imply busy or free, that is handled with the TRANSP
field. Luckily, libical already sets the is_busy status on the span for us.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This isn't the best way to do this, but it is the easiest. There are some
limitations that are going to need to be addressed at some point with reloads
and when I (or someone else) work on that, then the API can be updated to
handle passing the private config data that the calendar tech modules need in
a better way as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is done in such a way as to allow the driver to continue to
function with older databases which don't have these features.
(closes issue #16000)
Reported by: jamicque
Patches:
20091002__issue16000.diff.txt uploaded by tilghman (license 14)
20091002__issue16000__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: jamicque
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This affected the ~~EXTEN~~ hack, where a subroutine might have changed the
value before it was used in the caller.
Patch by myself, tested by ebroad on #asterisk
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JABBER_RECEIVE (along with JabberSend) makes Asterisk interact with users over
XMPP to process calls.
SendText can be used instead of JabberSend in the context of XMPP based voice
channels (chan_gtalk and chan_jingle).
(closes issue #12569)
Reported by: eech55
Tested by: phsultan, asannucci, lmadsen, jtodd, maxgo
Review: https://reviewboard.asterisk.org/r/88/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gcc 4.4 has more strict rules for aliasing. It doesn't like a
struct sockaddr_in pointer pointing to a struct sockaddr. So we make it
a union.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes res_calendar.c compile on OpenBSD and the same
cast is used in a lot of other places where time_t type vars are used.
(closes issue #15656)
Reported by: mvanbaak
Patches:
2009081100-rescalendarcompilefix.diff.txt uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207647 | kpfleming | 2009-07-21 08:04:44 -0500 (Tue, 21 Jul 2009) | 12 lines
Ensure that user-provided CFLAGS and LDFLAGS are honored.
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While doing some reading about OpenSSL, I noticed a couple of things that
needed to be improved with our usage of OpenSSL.
1) We had initialization of the library done in multiple modules. This has now
been moved to a core function that gets executed during Asterisk startup.
We already link OpenSSL into the core for TCP/TLS functionality, so this
was the most logical place to do it.
2) OpenSSL is not thread-safe by default. However, making it thread safe is
very easy. We just have to provide a couple of callbacks. One callback
returns a thread ID. The other handles locking. For more information,
start with the "Is OpenSSL thread-safe?" question on the FAQ page of
openssl.org.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205120 65c4cc65-6c06-0410-ace0-fbb531ad65f3