Reported by: klaus3000
Clean up AST_FORMAT_LIST list. It may have mattered in the old days to have undefined entries but these days it does not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78103 | mmichelson | 2007-08-03 15:25:22 -0500 (Fri, 03 Aug 2007) | 7 lines
Changed the behavior of sip's realtime_peer function to match the corresponding way of matching for non-realtime peers.
Now matches are made on both the IP address and port number, or if the insecure setting is set to "port" then just match on the
IP address.
In order to accomplish this, I also added a new API call, ast_category_root, which returns the first variable of an ast_category struct
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78172 | file | 2007-08-06 12:27:24 -0300 (Mon, 06 Aug 2007) | 4 lines
(closes issue #10355)
Reported by: wdecarne
Now that we pass through RTP timestamp information we need to make the allowed timestamp skew considerably less. There are situations where a source may change and due to the timestamp difference the receiver will experience an audio gap since we did not indicate by setting the marker bit that the source changed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78095 | russell | 2007-08-03 14:39:49 -0500 (Fri, 03 Aug 2007) | 28 lines
Add some improvements to lock debugging. These changes take effect
with DEBUG_THREADS enabled and provide the following:
* This will keep track of which locks are held by which thread as well as
which lock a thread is waiting for in a thread-local data structure. A
reference to this structure is available on the stack in the dummy_start()
function, which is the common entry point for all threads. This information
can be easily retrieved using gdb if you switch to the dummy_start() stack
frame of any thread and print the contents of the lock_info variable.
* All of the thread-local structures for keeping track of this lock information
are also stored in a list so that the information can be dumped to the CLI
using the "core show locks" CLI command. This introduces a little bit of a
performance hit as it requires additional underlying locking operations
inside of every lock/unlock on an ast_mutex. However, the benefits of
having this information available at the CLI is huge, especially considering
this is only done in DEBUG_THREADS mode. It means that in most cases where
we debug deadlocks, we no longer have to request access to the machine to
analyze the contents of ast_mutex_t structures. We can now just ask them
to get the output of "core show locks", which gives us all of the information
we needed in most cases.
I also had to make some additional changes to astmm.c to make this work when
both MALLOC_DEBUG and DEBUG_THREADS are enabled. I disabled tracking of one
of the locks in astmm.c because it gets used inside the replacement memory
allocation routines, and the lock tracking code allocates memory. This caused
infinite recursion.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r77945 | murf | 2007-08-02 12:21:40 -0600 (Thu, 02 Aug 2007) | 9 lines
Merged revisions 77942 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r77942 | murf | 2007-08-02 11:56:37 -0600 (Thu, 02 Aug 2007) | 1 line
This patch hopefully solves 10141; The user is running with it, and it doesn't appear to harm asterisk's operation, and may prevent a crash. I'll store it in 1.2, as we have shut down support on 1.2, but since I developed the patch before support finished, and it might affect 1.4 and trunk, I'm going ahead with it.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10083)
........
r77795 | qwell | 2007-07-30 15:17:08 -0500 (Mon, 30 Jul 2007) | 6 lines
Applications like SayAlpha() should not hang up the channel if you
request an "unknown" character such as a comma.
Instead, skip the character and move on.
Issue 10083, initial patch by jsmith, modified by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
inside of a function. (Yes, it would!) Replace it with a note that explains
why it can't be done using the way that the AST_THREADSTORAGE macro is
currently defined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77780 | russell | 2007-07-30 12:29:43 -0500 (Mon, 30 Jul 2007) | 16 lines
(closes issue #10301)
Reported by: fnordian
Patches:
asterisk-1.4.9-channel.c.patch uploaded by fnordian (license 110)
Additional changes by me
Fix some problems in channel_find_locked() which can cause an infinite loop.
The reference to the previous channel is set to NULL in some cases. These changes
ensure that the reference to the previous channel gets restored before needing
it again.
I'm not convinced that the code that is setting it to NULL is really the right
thing to do. However, I am making these changes to fix the obvious problem
and just leaving an XXX comment that it needs a better explanation that what
is there now.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77771 | file | 2007-07-30 12:47:52 -0300 (Mon, 30 Jul 2007) | 6 lines
(closes issue #10301)
Reported by: fnordian
Patches:
asterisk-1.4.9-channel.c.patch uploaded by fnordian (license 110)
Restore previous behavior where if we failed to lock the channel we wanted we would return to exactly the same point as if we had just reentered the function.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77460 | file | 2007-07-26 20:19:04 -0300 (Thu, 26 Jul 2007) | 4 lines
(closes issue #10302)
Reported by: litnialex
If a DTMF end frame comes from a channel without a begin and it is going to a technology that only accepts end frames (aka INFO) then use the minimum DTMF duration if one is not in the frame already.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77380 | mmichelson | 2007-07-26 15:35:17 -0500 (Thu, 26 Jul 2007) | 7 lines
Fixes to get ast_backtrace working properly. The AST_DEVMODE macro was never defined so the majority of ast_backtrace never
attempted compilation. The makefile now defines AST_DEVMODE if configure was run with --enable-dev-mode. Also, changes were
made to acccomodate 64 bit systems in ast_backtrace.
Thanks to qwell, kpfleming, and Corydon76 for their roles in allowing me to get this committed
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snuffy
Patches:
doxygen-updates.diff uploaded by snuffy (license 35)
Another big batch of doxygen documentation updates
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bbryant
Patches:
20070720__core_debug_by_file.patch uploaded by bbryant (license 36)
(with some modifications by me)
Tested by: russell, bbryant
This set of changes introduces the ability to set the core debug or verbose
levels on a per-file basis. Interestingly enough, in 1.4, you have the ability
to set core debug for a single file, but that functionality was accidentally
lost in the conversion of the CLI commands to the new format.
This patch improves upon what was in 1.4 by letting you set it for more than 1
file, and by also supporting verbose.
*** Janitor Project ***
This patch also introduces a new macro, ast_verb(), which is similar
to ast_debug(). Setting the per file verbose value only works for messages that
use this macro. Converting existing uses of ast_verbose() can be done like:
if (option_debug > 2)
ast_verbose(VERBOSE_PREFIX_3 "Something useful\n");
...
ast_verb(3, "Something useful\n");
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r76132 | russell | 2007-07-20 13:22:24 -0500 (Fri, 20 Jul 2007) | 6 lines
Use the define that specifies the default length of an artificially created
DTMF digit in the ast_senddigit() function. The define is set to 100ms by
default, which is the same thing that this function was using. But, using
the define lets changes take effect in this case, as well as the others where
it was already used.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(e.g. chan_sip.c in a subsequent commit).
Obviously exposing the internals of a data structure is far from ideal
(especially in a case like this where the implementation is very
inefficient and will need to be changed at some point).
On the other hand, it was also unclear what additional APIs should
we provide instead, and because exposing the stucture has no impact
on source and binary compatibility, this seemed to me the best option at
this time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r75403 | russell | 2007-07-17 15:01:12 -0500 (Tue, 17 Jul 2007) | 12 lines
(closes issue #10209)
Reported by: juggie
Patches:
10209-trunk-2.patch uploaded by juggie
Tested by: juggie, blitzrage
In ast_pbx_run(), mark a channel as hung up after an application returned -1,
or when it runs out of extensions to execute. This is so that code can detect
that this channel has been hung up for things like making sure DeadAGI is used
on actual dead channels, and is beneficial for other things, like making sure
someone doesn't try to start spying on a channel that is about to go away.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
