flag here, or else some arbitrary text will end up in the resulting
menuselect-tree file and things will explode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and off for new installations. This includes the translation from pipes to commas
for pbx_realtime and the EXEC command for AGI, as well as the change to the Set
application not to support multiple variables at once.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109973 | qwell | 2008-03-19 12:12:52 -0500 (Wed, 19 Mar 2008) | 5 lines
People report bugs about Asterisk crashing with DO_CRASH enabled was getting a little silly...
Now we only show certain cflags when you run configure with --enable-dev-mode
(corresponding menuselect change to follow)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
revision changed, every module that used the version was getting rebuilt after
every svn update. This severly annoyed me pretty quickly, so I have improved
the situation.
Now, instead of generating version.h, main/version.c is generated. version.c
includes the version information, as well as a couple of API calls for modules
to retrieve the version. So now, only version.c will get rebuilt, and the main
asterisk binary relinked, which is must faster than rebuilding http.c, manager.c,
asterisk.c, relinking the asterisk binary, chan_sip.c, func_version.c, res_agi ...
The only minor change in behavior here is that the version information reported by
chan_sip, for example, is the version of the Asterisk core, and not necessarily the
Asterisk version that the chan_sip module came from.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r94789 | russell | 2007-12-26 11:00:03 -0600 (Wed, 26 Dec 2007) | 5 lines
List include/asterisk/version.h as a .PHONY target because we want the commands
listed for this target to be executed regardless of whether the file exists or
not. This fixes having the version not up to date when running from svn.
(closes issue #11619, reported by plack, fixed by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ document the difference between "A=foo make ..." and "make A=foo ..."
and suggest using COPTS/LDOPTS if you need to use the second form to
pass compiler and loader flags;
+ define only in one place the environment used to build stuff in menuselect/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93180 | kpfleming | 2007-12-16 22:44:51 -0800 (Sun, 16 Dec 2007) | 23 lines
In http://lists.digium.com/pipermail/asterisk-dev/2007-December/031145.html,
rizzo brought up some issues related to the way that the metadata required
for menuselect and the rest of the build system is extracted from the source
files. Since I had a few hours to kill on an airplane today, I decided to
improve this situation... so now the system caches the extracted metadata
and uses it to build the menuselect 'tree' as much as it can. The result
of this is that when a single source file is changed, only the metadata for
that file needs to be extracted again, and the rest is used from the cache
files. I also reduced the number of forked processes required to do the
metadata extraction; it was actually possible to do most of what we needed
in the Makefiles themselves without using any shell scripts at all! On my
laptop, these changes resulted in an 80% decrease in the time required
for the 'menuselect.makeopts' automatic check to occur after editing a single
source file.
While doing this work I also cleaned up a few minor things in the Makefiles,
adding a check for 'awk' to the configure script and changed all remaining
places we use 'grep' or 'awk' to use the ones found by the configure script,
and changed the 'prep_tarball' script to build the menuselect metadata so
that tarballs of Asterisk will include it and won't require the user to
wait while it is extracted after unpacking.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
You can now add the path of local module subdirs from the command line with
make LOCAL_MOD_SUBDIRS= ....
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of DESTDIR and INSTALL_PATH - many thanks to Tzafrir Cohen and
Simon Perreault for extremely useful feedback:
1. comment out the [directories] section the created asterisk.conf ;
you can set the correct defaults at build time using INSTALL_PATH,
so the repetition here is redundant and often wrong.
(The next step now is move asterisk.conf outside the Makefile to
asterisk.conf.sample, because there is little if anything here
that needs to be constructed at build/install time).
2. use DESTDIR?=$(INSTALL_PATH) so you only need to specify a path
once if the two coincide. This should have no ill side effects,
because if you don't specify DESTDIR, you really need
INSTALL_PATH="" to set the correct defaults, and if you specify
DESTDIR the value is not overridden.
The second part required moving the 'export DESTDIR' right after
the assignment to prevent DESTDIR getting set by the export
(this is documented in the Makefile).o hopefully avoid the mistake)$
With this change you can now do something like this from your source tree:
make INSTALL_PATH=/some/place install samples
and then
main/asterisk -vdc
which will pick up the correct config files and libraries from
/some/place - i.e. great for developers!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92002 65c4cc65-6c06-0410-ace0-fbb531ad65f3
namely main/Makefile .
I am unclear where decisions on the build environment (CFLAGS,
LDFLAGS, LIBS and so on) should be made - right now they are
split here and there.
As a first step in cleaning up this situation, i am trying to at
least collect all instances of each variable in one place.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I am preserving the behaviour on *.adsi files,
i.e. overwrite anything there without making a backup.
However I am not sure that this is the intended behaviour.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r87460 | kpfleming | 2007-10-29 17:04:29 -0500 (Mon, 29 Oct 2007) | 2 lines
don't put '-pipe' into ASTCFLAGS if '-save-temps' is already there (used when debugging preprocessor issues) because the compiler will whine about each compile command
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r84474 | russell | 2007-10-02 15:06:07 -0500 (Tue, 02 Oct 2007) | 5 lines
* Don't build the menuselect-tree for the tarball, as it requires running the
configure script first
* Change the Makefile to note that menuselect-tree depends on the configure
script.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r84291 | qwell | 2007-10-01 16:52:45 -0500 (Mon, 01 Oct 2007) | 6 lines
Add dist-clean support for subdirs.
Change h323 to only remove the Makefile on a dist-clean, rather than a clean.
This fixes a bug I found with trying to run make after a make clean
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80257 | russell | 2007-08-22 11:21:58 -0500 (Wed, 22 Aug 2007) | 4 lines
Honor the contents of the COPTS variable as custom target CFLAGS. Apparently
this is what openwrt does.
(reported by Brian Capouch on the asterisk-dev list, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77410 | russell | 2007-07-26 16:23:23 -0500 (Thu, 26 Jul 2007) | 10 lines
AST_DEVMODE was defined in trunk, but not in 1.4. When Asterisk is compiled
under dev mode, AST_DEVMODE will get defined in buildopts.h. Change 1.4 to
define it in the same way that trunk does. Also, revert the change that added
this define in the Makefile
The advantage to doing it this way is that buildopts.h gets installed when
you install Asterisk. Then, when building any out of tree modules, or
building asterisk-addons, these modules know which options the rest of Asterisk
was built with.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77380 | mmichelson | 2007-07-26 15:35:17 -0500 (Thu, 26 Jul 2007) | 7 lines
Fixes to get ast_backtrace working properly. The AST_DEVMODE macro was never defined so the majority of ast_backtrace never
attempted compilation. The makefile now defines AST_DEVMODE if configure was run with --enable-dev-mode. Also, changes were
made to acccomodate 64 bit systems in ast_backtrace.
Thanks to qwell, kpfleming, and Corydon76 for their roles in allowing me to get this committed
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add a Makefile in doc/tex/ for generating PDF and HTML
* Add a README.txt file to doc/tex/ to document which tools are used and what
web sites to visit for getting them.
* Update build_tools/prep_tarball to put the proper Asterisk version string
in the automatically generated PDF for release tarballs
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This checks for it in configure, and only uses it if it's available.
If it's wrong, somebody please yell at me and tell me why.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to detect declarations in the middle of a block.
Approved by: Russel, Kevin
The fallout will be fixed in separate commits.
I am doing this only on trunk only for the time being, because 1.4
still requires a bit more polishing to give a clean compile
(at least on FreeBSD).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When enabled, it will set the systemname to be the hostname of the system
Issue 9713, patch by Juggie - slightly modified by me, to "failover" to localhost
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63535 | russell | 2007-05-09 08:24:03 -0500 (Wed, 09 May 2007) | 6 lines
I have seen multiple people post questions trying to figure out what the
message "The configure script must be executed before running 'make'" means.
So, add another like that says to specifically run ./configure. If this isn't
obvious enough, then they should be using something like AsteriskNOW and not
installing from source.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58931 | russell | 2007-03-15 17:25:12 -0500 (Thu, 15 Mar 2007) | 13 lines
Merge changes from svn/asterisk/team/russell/LaTeX_docs.
* Convert most of the doc directory into a single LaTeX formatted document
so that we can generate a PDF, HTML, or other formats from this
information.
* Add a CLI command to dump the application documentation into LaTeX format
which will only be include if the configure script is run with
--enable-dev-mode.
* The PDF turned out to be close to 1 MB, so it is not included. However, you
can simply run "make asterisk.pdf" to generate it yourself. We may include
it in release tarballs or have automatically generated ones on the web site,
but that has yet to be decided.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
convert various #if expressions to #ifdef for macros that may not be defined (and where the value is not important)
Note: two of these changes are in bison generated files which is going to be inconvenient when they are regenerated
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@55329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51262 | russell | 2007-01-18 15:54:23 -0600 (Thu, 18 Jan 2007) | 5 lines
Ensure that the locations given to the Asterisk configure script for ncurses,
curses, termcap, or tinfo are further passed along to the editline configure
script. This fixes some cross-compilation environments.
(issue #8637, reported by ovi, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50754 | kpfleming | 2007-01-13 10:45:37 -0600 (Sat, 13 Jan 2007) | 2 lines
when building the sample greetings for maibox 1234@default during 'make samples', build a greeting for each language and file format the user selected to install with menuselect (reported by Brian Capouch on asterisk-dev)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r50228 | russell | 2007-01-09 21:17:46 -0500 (Tue, 09 Jan 2007) | 14 lines
Merged revisions 50227 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r50227 | russell | 2007-01-09 21:16:45 -0500 (Tue, 09 Jan 2007) | 6 lines
Make the number that represents the major version number a single digit instead
of 2. Using two digits makes it an octal number when put into version.h, which
breaks the compilation of any out of tree module that checks the version for
any version after 1.2.7 (reported by Matteo Brancaleoni on the asterisk-dev
mailing list, who gave credit to vihai for pointing it out)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49098 | kpfleming | 2007-01-01 16:08:24 -0600 (Mon, 01 Jan 2007) | 2 lines
revert this change until a better solution can be found... 'env -i' was not being used properly, but even when changed to do so, this process fails during cross-compilation because the menuselect build still sees 'CC' as set to the cross-compiler
........
r49099 | kpfleming | 2007-01-01 16:48:03 -0600 (Mon, 01 Jan 2007) | 2 lines
use a simpler (and portable) method to ensure that menuselect is built as a host binary
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48525 | kpfleming | 2006-12-16 15:14:34 -0600 (Sat, 16 Dec 2006) | 2 lines
simplify dependency tracking system, using the compiler's built-in method for generating them, and only doing dependency tracking if developer mode is enabled via the configure script
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48521 | kpfleming | 2006-12-16 14:12:41 -0600 (Sat, 16 Dec 2006) | 2 lines
since we really, really have to have autoconfig.h included before all other headers (especially system headers), the Makefile will now force it to happen (this will fix build problems with files like ast_expr2f.c, where we can't control the inclusion order in the file itself)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48190 | russell | 2006-12-01 18:16:28 -0500 (Fri, 01 Dec 2006) | 12 lines
FreeBSD 6.1 does not include wget by default. However, it has fetch which will
work just fine for our purposes of downloading the sounds packages. So, check
for both wget and fetch and the configure script and use what was found to
download them. If neither one was found, and sound packages are selected that
must be downloaded, the install process will print out an informative error
message indicating the situation.
Also, fix a couple places where "make" was hard coded into some output messages
by replacing them with the $(MAKE) variable.
(issue #8451, initial patch by pabelanger, with additional modifications by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r47494 | russell | 2006-11-11 10:31:08 -0500 (Sat, 11 Nov 2006) | 6 lines
Add the target "menuconfig" as an alias for the "menuselect" target. This is
just a favor to users so that if you accidentally type "make menuconfig"
instead of "make menuselect", it still works.
(inspired by a comment on IRC from wangster calling me an "especially devious
asterisk developer" for having it be menuselect instead of menuconfig. :) )
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44125 | russell | 2006-10-01 14:30:06 -0400 (Sun, 01 Oct 2006) | 6 lines
Fix a problem that cuased AST_DATA_DIR in defaults.h to be empty. The cause is
that since ASTDATADIR is explicitly exported using "export ASTDATADIR" at the
top of the Makefile, make no longer considers the variable "undefined", so the
Makefile can't use ?= to set ASTDATADIR if not yet set.
(issue #8063, reported by akohlsmith, fixed by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- with AST_DEVMODE, building codecs/lpc10 fails because of lots
of warnings, and the configure step in editline fails as well.
Fix this by removing the -Werror in these steps.
- on FreeBSD (but probably on other platforms as well), the final
link of asterisk fails because AST_LIBS was not exported to the
subdirs Makefiles. Add a proper fix in the top-level Makefile
(a possible alternative way is to add "export AST_LIBS" near
the beginning of the file).
With this fix, i believe that some of the platform-specific
conditionals in main/Makefile are redundant (because they should
be already dealt with in the top level Makefile) but i don't
have a platform to check.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Solaris sed doesn't have -r, which means things like \s and \S don't work.
2) GNU sed version 4.1.2 failed on a very simple test
echo "Test Test" | sed -r -e 's/\s/x/g'
should have returned "TestxxxTest", but did not (however, 4.1.4 did?).
3) The CFLAGS were never set, so that entire line actually did nothing. Now it's useful again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
was not found in the user level makeopts file, the variable is defined, but
empty.
I wish we could just require GNU make 3.81 :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
level makeopts files - if MENUSELECT_CFLAGS is set to nothing in the user level
makeotps file, then the Makefile should not look in the global file at all.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"make" as the current build and some of the MENUELSELECT_CFLAGS are set in the
user or global level asterisk.makeopts file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
support the new location for zaptel.h and tonezone.h
use the dependency information output by menuselect to build Makefile rules for each module for header files and libraries
combine the common rules into a top-level Makefile.rules file
remove all (now) unnecessary stuff from subdir Makefiles
change translator API so that the newpvt() callback returns an int instead of a pointer (it no longer allocates memory)
alphabetize --with-<foo> options in configure script
enhance Net-SNMP support in configure script to provide a --with-netsnmp option
fix support for --with-pq so that if pg-config is not found when --with-pq is specified, an error will be generated
add 'optional package' usage to modules now that menuselect can output it
allow res_snmp to build by default, since the new loader changes coming soon will solve the function naming problem (and users can disable it via menuselect anyway)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
subdirectory instead of a for loop
- remove the FORCE target from the main Makefile and add the couple places
I used it to the .PHONY target. .PHONY does the same thing and is a built-in
more efficient way of doing it.
- add a bunch more targets to .PHONY ...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- add a copyright header to the build_tools Makefile
- remove 'depend' from the 'all' target in agi/ and utils/ since it is handled
by the main Makefile already
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35479 65c4cc65-6c06-0410-ace0-fbb531ad65f3