This patch fixes some bad default value handling in the following
settings:
* The 'message_context' and 'accountcode' settings are not mandatory. As
such, we can allow their stringfield values to be empty.
* The 'media_encryption' setting applies a default value of 'none' to
the setting, which it then can't parse or understand. Since the value
is documented to be 'no', this will now apply that as the default
value.
Change-Id: Ib9be7f97a7a5b9bc7aee868edf5acf38774cff83
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
The loop to find the first available contact of an endpoint grabbed
contact from the iterator, then checked for offline state. This
caused the first contact after the state was found to leak a reference.
ASTERISK-25141
Change-Id: Id0f1d87410fc63742db0594eb4b18b36e99aec08
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
This patch refactors the transaction timeout processing to eliminate
calling the lower level public pjsip functions and reverts to calling
pjsip_endpt_send_request again. This is the result of me noticing
a possible incompatibility with pjproject-2.4 which was causing
contact status flapping.
The original version of this feature used the lower level calls to
get access to the tsx structure in order to cancel the transaction
when our own timer expires. Since we no longer have that access,
if our own timer expires before the pjsip timer, we call the callbacks
and just let the pjsip transaction take it's own course. When the
transaction ends, it discovers the callbacks have already been run
and just cleans itself up.
A few messages in pjsip_configuration were also added/cleaned up.
ASTERISK-25105 #close
Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
The "Add qualify_timeout processing and eventing" patch introduced
an issue where contacts that had qualify_frequency set to 0 were
showing Unavailable instead Unknown. This patch checks for
qualify_frequency=0 and create an "Unknown" contact_status
with an RTT = 0.
Previously, the lack of contact_status implied Unknown but since
we're now changing endpoint state based on contact_status, I've
had to add new UNKNOWN status so that changes could trigger the
appropriate contact_status observers.
ASTERISK-24977: #close
Change-Id: Ifcbc01533ce57f0e4e584b89a395326e098b8fe7
This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
The basic issues are that changes in contact status don't cause events to be
emitted for the associated endpoint. Only dynamic contact add/delete actions
update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds
which is a long time.
This patch makes use of the new transaction timeout feature in r4585 and
provides the following capabilities...
1. A new aor/contact variable 'qualify_timeout' has been added that allows the
user to specify the maximum time in milliseconds to wait for a response to an
OPTIONS message. The default is 3000ms. When the timer expires, the contact is
marked unavailable.
2. Contact status changes are now propagated up to the endpoint as follows...
When any contact is 'Available', the endpoint is marked as 'Reachable'. When
all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The
existing endpoint events are generated appropriately.
ASTERISK-24863 #close
Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
Tested-by: Dmitriy Serov
Tested-by: George Joseph <george.joseph@fairview5.com>
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
........
Merged revisions 434637 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting the configuration option 'timers' equal to 'no' the bit flag was
not properly negated. This patch clears all associated flags and only sets the
specified one. pjsip will handle any necessary flag combinations. Also went
ahead and did similar for the '100rel' option.
ASTERISK-24910 #close
Reported by: Ray Crumrine
Review: https://reviewboard.asterisk.org/r/4582/
........
Merged revisions 434131 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Incoming PJSIP call legs that have not been answered yet send unnecessary
"180 Ringing" or "183 Progress" messages every time a connected line
update happens. If the outgoing channel is also PJSIP then the incoming
channel will always send a "180 Ringing" or "183 Progress" message when
the outgoing channel sends the INVITE.
Consequences of these unnecessary messages:
* The caller can start hearing ringback before the far end even gets the
call.
* Many phones tend to grab the first connected line information and refuse
to update the display if it changes. The first information is not likely
to be correct if the call goes to an endpoint not under the control of the
first Asterisk box.
When connected line first went into Asterisk in v1.8, chan_sip received an
undocumented option "rpid_immediate" that defaults to disabled. When
enabled, the option immediately passes connected line update information
to the caller in "180 Ringing" or "183 Progress" messages as described
above.
* Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or
"183 Progress" messages. The default is "no" to disable sending the
unnecessary messages.
ASTERISK-24781 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4473/
........
Merged revisions 433338 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a type=global section is not defined in pjsip.conf the global
defaults are not applied. As a result the mandatory Max-Forwards header
is not added to SIP messages for res_pjsip/chan_pjsip.
The handling of pjsip.conf type=global objects has several problems:
1) If the global object is missing the defaults are not applied.
2) If the global object is missing the default_outbound_endpoint's default
value is not returned by ast_sip_global_default_outbound_endpoint().
3) Defines are needed so default values only need to be changed in one
place.
* Added a sorcery instance observer callback to check if there were any
type=global sections loaded. If there were more than one then issue an
error message. If there were none then apply the global defaults.
* Fixed ast_sip_global_default_outbound_endpoint() to return the
documented default when no type=global object is defined.
* Made defines for the global default values.
* Increased the default_useragent[] size because SVN version strings can
get lengthy and 128 characters may not be enough.
* Fixed an off-nominal code path ref leak in global_alloc() if the string
fields fail to initialize.
* Eliminated RAII_VAR in get_global_cfg() and
ast_sip_global_default_outbound_endpoint().
ASTERISK-24807 #close
Reported by: Anatoli
Review: https://reviewboard.asterisk.org/r/4467/
........
Merged revisions 432766 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There have been a couple of times where a crash occurred in the dtls_handler
section of the code for res_pjsip. Unfortunately, in working this issue the
problem was unable to be reproduced. After looking at the backtraces and
through the code the current best guess as to why this happened might be due
to a reentrance problem and the strtok function. So, the current fix is to
convert the strtok function into the reentrant version of the function,
strtok_r.
ASTERISK-24741 #close
Reported by: Zane Conkle
Review: https://reviewboard.asterisk.org/r/4409/
........
Merged revisions 431698 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to the original patch causing memory corruptions it was removed until the
problem could be resolved. This patch is the original patch plus some added
locking around stasis router subcription that was needed to avoid the memory
corruption.
Description of the original problem and patch (still applicable):
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4363/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 431179 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4311/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 430628 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enforces the requirements in PJSIP for session timer configuration. The minimum
expiration period must be 90 seconds or higher and the normal expiration period can not
be lower than the minimum expiration period. If either of these were done the code would
assert at session setup time.
ASTERISK-24336 #close
Reported by: Leon Rowland
........
Merged revisions 427978 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427979 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an option, moh_passthrough, that when enabled will pass
hold and unhold requests through using a SIP re-invite. When placing on
hold a re-invite with sendonly will be sent and when taking off hold a
re-invite with sendrecv will be sent. This allows remote servers to handle
the musiconhold instead of the local Asterisk instance being responsible.
Review: https://reviewboard.asterisk.org/r/4103/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the latest update to DTLS-SRTP support the ability to configure
the hash used for fingerprints was added. This gave us two supported ones:
SHA-1 and SHA-256. The default was accordingly updated to SHA-256.
Unfortunately this configuration ability was not exposed within res_pjsip.
This change adds a dtls_fingerprint option that controls it.
#SIPit31
........
Merged revisions 424290 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424291 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
........
Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A number of various PJSIP AMI actions were failing to parse out and place the
ActionID into their responses. This patch updates the various PJSIP actions
such that the passed in ActionID is emitted on any event list complete events,
as well as any intermediate events created as a result of the action.
#ASTERISK-23947 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3675/
........
Merged revisions 417460 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some performance testing of Asterisk with AGI, ARI, and lots of Local
channels, we noticed that there's quite a hit in performance during channel
creation and releasing to the dialplan (ARI continue). After investigating
the performance spike that occurs during channel creation, we discovered
that we create a lot of channel snapshots that are technically unnecessary.
This includes creating snapshots during:
* AGI execution
* Returning objects for ARI commands
* During some Local channel operations
* During some dialling operations
* During variable setting
* During some bridging operations
And more.
This patch does the following:
- It removes a number of fields from channel snapshots. These fields were
rarely used, were expensive to have on the snapshot, and hurt performance.
This included formats, translation paths, Log Call ID, callgroup, pickup
group, and all channel variables. As a result, AMI Status,
"core show channel", "core show channelvar", and "pjsip show channel" were
modified to either hit the live channel or not show certain pieces of data.
While this is unfortunate, the performance gain from this patch is worth
the loss in behaviour.
- It adds a mechanism to publish a cached snapshot + blob. A large number of
publications were changed to use this, including:
- During Dial begin
- During Variable assignment (if no AMI variables are emitted - if AMI
variables are set, we have to make snapshots when a variable is changed)
- During channel pickup
- When a channel is put on hold/unhold
- When a DTMF digit is begun/ended
- When creating a bridge snapshot
- When an AOC event is raised
- During Local channel optimization/Local bridging
- When endpoint snapshots are generated
- All AGI events
- All ARI responses that return a channel
- Events in the AgentPool, MeetMe, and some in Queue
- Additionally, some extraneous channel snapshots were being made that were
unnecessary. These were removed.
- The result of ast_hashtab_hash_string is now cached in stasis_cache. This
reduces a large number of calls to ast_hashtab_hash_string, which reduced
the amount of time spent in this function in gprof by around 50%.
#ASTERISK-23811 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3568/
........
Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a problem where permanent contacts being qualified were not
being updated. This was caused by the permanent contacts getting a uuid and not a
known identifier, causing an inability to look them up when updating in the
qualify code. A bug also existed where the new configuration may not be available
immediately when updating qualifies.
(closes issue ASTERISK-23514)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3448/
........
Merged revisions 412551 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit contains several changes to sorcery:
1) Application of sorcery configuration based on module name is automatically performed
when sorcery is opened for a module.
2) Sorcery will not attempt to apply the same wizard to an object type more than once.
3) Sorcery gives more exact results when attempting to apply a wizard, whether as the
default or based on configuration.
Sorcery unit tests still pass for me after making these changes.
Review: https://reviewboard.asterisk.org/r/3326
........
Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Playing back a file to a channel in an ARI bridge would attempt to wait until
the playback concluded before returning. The method used involved signaling the
waiting thread in the ARI custom playback function.
The problem with this is that there were some corner cases that were not accounted for:
* If a bridge channel could not be found, then we never would attempt the playback but
would still attempt to wait for the playback to complete.
* If the bridge playfile action failed to queue, we would still attempt to wait for the
playback to complete.
* If the bridge playfile action were queued but some circumstance caused the playback
not to occur (the bridge dies, the channel is removed from the bridge), then we would
never be notified.
The solution to this is to move the waiting logic into the bridge code. A new bridge
API function is added to queue a synchronous action on a bridge. The waiting thread
is notified when the queued frame has been freed, either due to an error occurring
or due to successful playback. As a failsafe, the waiting thread has a 10 minute
timeout just in case there is a frame leak somewhere.
Review: https://reviewboard.asterisk.org/r/3338
........
Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the 'pjsip show channel' and 'pjsip show contact' commands.
Refactored out the hated ast_hashtab. Replaced with ao2_container.
Cleaned up function naming. Internal only, no public name changes.
Cleaned up whitespace and brace formatting in cli code.
Changed some NULL checking from "if"s to ast_asserts.
Fixed some register/unregister ordering to reduce deadlock potential.
Fixed ast_sip_location_add_contact where the 'name' buffer was too short.
Fixed some self-assignment issues in res_pjsip_outbound_registration.
(closes issue ASTERISK-23276)
Review: http://reviewboard.asterisk.org/r/3283/
........
Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to prevent confusion over the allow and disallow
list of codecs being the same an option for registering a
field as an alias is added. The alias field will be read
from the configuration file, but afterwards is not listed
as a known field. With disallow set as an alias, the CLI
command pjsip show endpoint # will list the allow= field,
but not the disallow field.
(closes issue ASTERISK-23092)
Review: https://reviewboard.asterisk.org/r/3193/
........
Merged revisions 410190 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Certain options available that specify a SIP URI perform validation
on the provided URI using the PJSIP URI parser. This operation
requires that the thread executing it be registered with the PJLIB
library. During reloads this was done on a thread which was NOT
registered with it.
This fixes the problem by creating a task which reloads the
configuration on a PJSIP thread.
(closes issue ASTERISK-22923)
Reported by: Anthony Messina
........
Merged revisions 403179 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some options (such as call_group and pickup_group) share the same configuration
handler and decide what logic to use based on the name of the option. These
handlers were not updated to check for the new option names and were treating
the options as invalid.
This change simply updates the handlers with the proper names of the options.
(closes issue ASTERISK-22922)
Reported by: Anthony Messina
........
Merged revisions 403173 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes two issues when setting an outbound proxy:
1. The outbound proxy URI was not parsed and validated during configuration.
2. If an outgoing dialog was created and the outbound proxy could not be set an assertion would
occur because the usage count on the dialog was not decremented.
The documentation has also been updated to specify that a full URI must be specified for
the outbound proxy.
(closes issue ASTERISK-22672)
Reported by: Antti Yrjola
........
Merged revisions 400824 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The endpoint option does not apply to communication with external entities. Rather,
the option is applied to all communications with the endpoint. The external_media_address
transport configuration option may override the endpoint option if it turns out that
we are going to be communicating with an external entity.
Two things of note:
1) I have not updated the XML documentation. This is being taken care of by Rusty as part
of his work on issue ASTERISK-22405
2) This commit is likely to cause testsuite failures since there are tests that use the
external_media_address endpoint option, and they will need to be changed over. Well, I'm
planning to get that updated ASAP after this commit.
(closes issue ASTERISK-22528)
reported by Rusty Newton
........
Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The rtpengine configuration parameter was documented in the XML documentation,
but it was not actually registered with the sorcery object. This adds the
parameter with a default of "asterisk", such that res_rtp_asterisk is chosen as
the default RTP implementation.
(closes issue ASTERISK-22380)
Reported by: Rusty Newton
Tested by: Rusty Newton
........
Merged revisions 397621 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is more-or-less a reversion of previous ACL behavior so that
it is more self-contained. ACL sections are now only parsed if res_pjsip_acl.so
is loaded. Moreover, the configuration section is now "type=acl" instead of
"type=security".
The original reason for having ACLs configured in a "type=security" section
was to lump ACLs and other security-related items into the same section. The
problem is that ACLs really should be in their own sections and there are
no other security-related options implemented anyways.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matt Jordan
Kevin Harwell
Corey Farrell
George Joseph
Richard Mudgett
Mark Michelson
Joshua Colp
Kinsey Moore
Jonathan Rose
Scott Griepentrog