https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294278 | jpeeler | 2010-11-08 15:59:45 -0600 (Mon, 08 Nov 2010) | 23 lines
Merged revisions 294277 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r294277 | jpeeler | 2010-11-08 15:58:13 -0600 (Mon, 08 Nov 2010) | 16 lines
Fix playback failure when using IAX with the timerfd module.
To fix this issue the alert pipe will now be used when the timerfd module is
in use. There appeared to be a race that was not solved by adding locking in the
timerfd module, but needed to be there anyway. The race was between the timer
being put in non-continuous mode in ast_read on the channel thread and the IAX
frame scheduler queuing a frame which would enable continuous mode before the
non-continuous mode event was read. This race for now is simply avoided.
(closes issue #18110)
Reported by: tpanton
Tested by: tpanton
I put tested by tpanton because it was tested on his hardware. Thanks for the
remote access to debug this issue!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the option to give a module a load priority. The value represents the order in which a module's load() function is initialized. The lower the value, the higher the priority. The value is only checked if the AST_MODFLAG_LOAD_ORDER flag is set. If the AST_MODFLAG_LOAD_ORDER flag is not set, the value will never be read and the module will be given the lowest possible priority
on load. Since some modules are reliant on a timing interface, the timing modules have been given a high load priorty.
(closes issue #15191)
Reported by: alecdavis
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/262/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In res_timer_timerfd, handle the case that set_rate gets called while a timer
is still in continuous mode. In this case, we want to remember the configured
rate, but not actually set it until continuous mode has been disabled.
Thanks to dvossel for finding and helping to debug the problem.
(closes issue #15080)
Reported by: dvossel
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add module use count handling so that timing modules can be unloaded.
2) Implement unload_module() functions for the timing interface modules.
3) Allow multiple timing modules to be loaded, and use the one with the
highest priority value.
4) Report which timing module is being use in the "timing test" CLI command.
(closes issue #14489)
Reported by: russell
Review: http://reviewboard.digium.com/r/162/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This sequence of events posed a problem
timerfd_timer_open
timerfd_timer_enable_continuous
timerfd_timer_set_rate
timerfd_timer_disable_continuous
The reason was that the timing module was written under the assumption
that timerfd_timer_set_rate would not be called between enabling and
disabling continuous mode. What happened in this situation was that
timerfd_timer_enable_continuous saved off our previously set timer (in this
situation a 0 timer, meaning it never runs out). Then timerfd_timer_disable_continuous
would restore this 0 timer, even though it logically should set the timer to be whatever
was set in timerfd_timer_set_rate.
Now the behavior in timerfd_timer_set_rate is to overwrite the saved timer that may
or may not have been set in timerfd_timer_enable_continuous. Even if
timerfd_timer_enable_continuous has not been previously called, this will not harm the
operation.
Thanks to Terry Wilson for discovering the problem and giving me a really great debug
capture that pointed out the problem clearly
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a new timing interface. In order to use it,
you must be running a Linux with a kernel version of
2.6.25 or newer and glibc 2.8 or newer.
This timing interface is a good alternative if a timing
source is necessary (e.g. for IAX trunking) but DAHDI is
otherwise unnecessary for the system.
For now, this commit contains the actual work done in the
res_timing_timerfd branch. There are no notices in the README
or CHANGES files yet, but they will be added in my next commit.
The timing API of Asterisk also needs to have a bit of work done
with regards to choosing which timing interface to use. This commit
makes the choice a build-time decision, by only allowing one of
the timer interfaces to be chosen in menuselect. It would be preferable
if the choice could be made at run-time, however. The preferred timing
interface could be loaded and tested, and if it does not work, choice
number two may be used instead. That sort of thing. That is beyond
the scope of work in this branch though.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157820 65c4cc65-6c06-0410-ace0-fbb531ad65f3