https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314067 | dvossel | 2011-04-18 10:23:45 -0500 (Mon, 18 Apr 2011) | 22 lines
Remove the need for deadlock avoidance in chan_sip do_monitor.
Deadlock avoidance between the sip pvt and the pvt->owner is
very difficult. Now that channel's are ao2 objects, this complication
is no longer necessary. It turns out the pvt's msg queue only
exists because of deadlock avoidance (when deadlock avoidance fails
msgs were added to a queue to be processed later), so this goes away as well.
The technique used in the new sip_lock_pvt_full() function should
be used as a template for replacing all locations where deadlock
avoidance occurs between a channel tech_pvt and the pvt's owner.
My hope is that this will begin a reversal of the invalid channel
driver locking architecture we have been using for so long.
This patch also resolves an issue where the pvt->owner gets
unlocked during processing the msg queue.
(closes issue #18690)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/1182/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312866 | rmudgett | 2011-04-05 10:38:14 -0500 (Tue, 05 Apr 2011) | 15 lines
Responding to OPTIONS packet with 404 because Asterisk not looking for "s" extension.
The get_destination() function was not using the "s" extension when the
request URI did not specify an extension. This is a regression caused
when the URI parsing code was extracted into parse_uri().
Made get_destination() substitute the "s" extension when the parsed URI
results in an empty string.
(closes issue #18348)
Reported by: shmaize
Patches:
issue18348_v1.8.patch uploaded by rmudgett (license 664)
Tested by: shmaize
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311352 | jrose | 2011-03-18 11:19:05 -0500 (Fri, 18 Mar 2011) | 10 lines
Changes some print statements/events to use a blank string in place of NULL if the string in question is NULL.
This is supposed to improve Solaris compatibility since Solaris goes berserk when trying to output NULL strings.
(closes issue #18759)
Reported by: bklang
Patches:
null-strings.patch uploaded by bklang (license 919)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309256 | qwell | 2011-03-02 13:54:20 -0600 (Wed, 02 Mar 2011) | 15 lines
Merged revisions 309255 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309255 | qwell | 2011-03-02 13:53:47 -0600 (Wed, 02 Mar 2011) | 8 lines
Fix usage of "hasvoicemail=yes" and "mailbox=" in users.conf for SIP.
Since it's a duplicate, nothing is going to be done, so delme doesn't need to
be set at all. Strangely, when this was added, this was being set to 1 in 1.6,
and 0 in trunk.
(issue AST-439)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r308945 | alecdavis | 2011-02-26 07:52:53 +1300 (Sat, 26 Feb 2011) | 21 lines
Fix Deadlock with attended transfer of SIP call
Call path
sip_set_rtp_peer (locks chan then pvt)
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper (locks p->owner)
But by the time p->owner lock was attempted, seems as though chan and p->owner were different.
So in sip_set_rtp_peer, lock pvt first then lock p->owner using deadlocking methods.
(closes issue #18837)
Reported by: alecdavis
Patches:
bug18837-trunk.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, Irontec, ZX81, cmaj
Review: [https://reviewboard.asterisk.org/r/1126/]
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The nativeformats field was being overwritten when it should have been
appended too. This caused some format capabilities to be lost briefly and
some log warnings to be output.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306619 | twilson | 2011-02-07 14:15:27 -0800 (Mon, 07 Feb 2011) | 24 lines
Merged revisions 306618 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306618 | twilson | 2011-02-07 13:59:54 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306617 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306617 | twilson | 2011-02-07 13:51:43 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't allow a REFER w/replaces to replace its own dialog
Asterisk currently accepts a REFER with a Refer-To with an embedded Replaces
header that matches the dialog of the REFER. This would be a situation like A
calls B, A calls C, A transfers B to A, which is just silly. This patch makes
the transfer fail instead of making Asterisk freak out and forget to hang other
channels up.
Review: https://reviewboard.asterisk.org/r/1093/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306215 | jpeeler | 2011-02-03 17:49:28 -0600 (Thu, 03 Feb 2011) | 20 lines
Fix SIP deadlock involving state changes.
Once again a call to pbx_builtin_getvar_helper (and pbx_builtin_setvar_helper)
has caused locking problems. Both of these functions lock the channel when
the channel argument is passed in!
In this case, the suspected problem (the backtrace makes it impossible to tell)
was the private being locked in sip_set_rtp_peer and then:
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper
(Traced to verify that the fix was only required in 1.8 and later.)
(closes issue #18491)
Reported by: cmaj
Patches:
chan_sip_fix_deadlocks_bug_18491.txt uploaded by cmaj (license 830)
Tested by: cmaj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305923 | rmudgett | 2011-02-02 18:24:40 -0600 (Wed, 02 Feb 2011) | 24 lines
Merged revisions 305889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305254 | qwell | 2011-01-31 17:07:00 -0600 (Mon, 31 Jan 2011) | 24 lines
Merged revisions 305253 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305253 | qwell | 2011-01-31 16:59:34 -0600 (Mon, 31 Jan 2011) | 17 lines
Merged revisions 305252 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305252 | qwell | 2011-01-31 16:56:54 -0600 (Mon, 31 Jan 2011) | 10 lines
Prevent a crash when dialing a technology with no destination (ex: Dial(SIP/))
chan_iax2 and other channel drivers already had code to prevent this. The
attempt that app_dial was making to prevent it was not correct, so I fixed that.
(closes issue #18371)
Reported by: gbour
Patches:
18371.patch uploaded by gbour (license 1162)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303962 | twilson | 2011-01-25 16:09:01 -0600 (Tue, 25 Jan 2011) | 30 lines
Merged revisions 303960 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303960 | twilson | 2011-01-25 16:02:42 -0600 (Tue, 25 Jan 2011) | 23 lines
Merged revisions 303906 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303906 | twilson | 2011-01-25 14:50:59 -0600 (Tue, 25 Jan 2011) | 16 lines
Guard against retransmitting BYEs indefinitely
In the case of an attended transfer (A calls B, A atxfers to C) where
A becomes unreachable before replying to Asterisk's BYE, Asterisk can
sometimes retransmit the BYE indefinitely. This is because
__sip_autodestruct tests p->refer && !ast_test_flag(&p->flags[0],
SIP_ALREADYGONE and will then transmit a BYE. When this BYE times out,
it will not ever be marked as ALREADYGONE, so when __sip_autodestruct
is called again, we end up starting the cycle over.
This patch adds a call to sip_alreadygone(pkt->owner) in retrans_pkt
in the case of a BYE that has timed out. This should prevent Asterisk
from trying to transmit new BYE messages in the future.
Review: https://reviewboard.asterisk.org/r/1077/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293493 | twilson | 2010-11-01 09:58:00 -0500 (Mon, 01 Nov 2010) | 14 lines
Only offer codecs both sides support for directmedia
When using directmedia, Asterisk needs to limit the codecs offered to just
the ones that both sides recognize, otherwise they may end up sending audio
that the other side doesn't understand.
(closes issue #17403)
Reported by: one47
Patches:
sip_codecs_simplified4 uploaded by one47 (license 23)
Tested by: one47, falves11
Review: https://reviewboard.asterisk.org/r/967/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r301790 | jpeeler | 2011-01-14 11:32:52 -0600 (Fri, 14 Jan 2011) | 42 lines
Resolve deadlock involving REFER.
Two fixes:
1) One must always have the private unlocked before calling
pbx_builtin_setvar_helper to not invalidate locking order since it locks the
channel.
2) Unlock the channel before calling pbx_find_extension, which starts and stops
autoservice during the lookup. The problem scenario as illustrated by the
reporter:
Thread: do_monitor
-----------------------
handle_request_do
handle_incoming
handle_request_refer
ast_parking_ext_valid
pbx_find_extension
ast_autoservice_stop
while (chan_list_state == as_chan_list_state) { usleep(1000); }
Thread: autoservice_run
-----------------------
autoservice_run
chan = ast_waitfor_n
ast_waitfor_nandfds
ast_waitfor_nandfds_classic / simple / complex (depending on your system)
ast_channel_lock(c[x]);
handle_request_do and schedule_process_request_queue locks the owner
if it exists. The autoservice thread is waiting for the channel lock, which
wasn't ever released since the do_monitor thread was waiting for autoservice
operations to complete. Solved by unlocking the channel but keeping a reference
to guarantee safety.
(closes issue #18403)
Reported by: jthurman
Patches:
20110103-blind_deadlock.diff uploaded by jthurman (license 614)
issue18403.patch uploaded by jpeeler (license 325)
Tested by: jthurman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r300301 | twilson | 2011-01-04 11:54:41 -0600 (Tue, 04 Jan 2011) | 29 lines
Merged revisions 300298 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r300298 | twilson | 2011-01-04 11:37:26 -0600 (Tue, 04 Jan 2011) | 22 lines
Merged revisions 300216 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r300216 | twilson | 2011-01-04 11:11:48 -0600 (Tue, 04 Jan 2011) | 15 lines
Don't authenticate SUBSCRIBE re-transmissions
This only skips authentication on retransmissions that are already
authenticated. A similar method is already used for INVITES. This
is the kind of thing we end up having to do when we don't have a
transaction layer...
(closes issue #18075)
Reported by: mdu113
Patches:
diff.txt uploaded by twilson (license 396)
Tested by: twilson, mdu113
Review: https://reviewboard.asterisk.org/r/1005/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r299353 | mnicholson | 2010-12-21 09:25:03 -0600 (Tue, 21 Dec 2010) | 30 lines
Merged revisions 299242 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r299242 | mnicholson | 2010-12-20 15:25:35 -0600 (Mon, 20 Dec 2010) | 23 lines
Merged revisions 299194,299198,299220 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r299194 | mnicholson | 2010-12-20 14:45:38 -0600 (Mon, 20 Dec 2010) | 6 lines
Respond as soon as possible with a 202 Accepted to refer requests.
This change also plugs a few memory leaks that can occur when parking sip calls.
ABE-2656
........
r299198 | mnicholson | 2010-12-20 15:00:44 -0600 (Mon, 20 Dec 2010) | 2 lines
Remove changes to via processing that were not supposed to go into the last commit.
........
r299220 | mnicholson | 2010-12-20 15:21:39 -0600 (Mon, 20 Dec 2010) | 4 lines
Use ast_free() instead of free()
ABE-2656
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r299248 | mmichelson | 2010-12-20 15:38:30 -0600 (Mon, 20 Dec 2010) | 20 lines
Fix a couple of CCSS issues.
* Make sure to allocate a cc_params structure
when creating autopeers.
* Use sip_uri_cmp when retrieving SIP CC agents
and monitors in case parameters appear in the
URI.
(closes issue #18504)
Reported by: kkm
(closes issue #18338)
Reported by: GeorgeKonopacki
Patches:
18338.diff uploaded by mmichelson (license 60)
Tested by: GeorgeKonopacki
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r298539 | tilghman | 2010-12-16 03:28:17 -0600 (Thu, 16 Dec 2010) | 8 lines
Ensure the ipaddr field in realtime is large enough to handle IPv6 addresses.
(closes issue #18464)
Reported by: IgorG
Patches:
realtime_ipv6store.diff uploaded by IgorG (license 20)
(plus a few additional lines by tilghman)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297965 | twilson | 2010-12-09 16:18:19 -0600 (Thu, 09 Dec 2010) | 28 lines
Merged revisions 297960 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297960 | twilson | 2010-12-09 16:10:31 -0600 (Thu, 09 Dec 2010) | 21 lines
Merged revisions 297959 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297959 | twilson | 2010-12-09 16:00:30 -0600 (Thu, 09 Dec 2010) | 14 lines
Ignore spurious REGISTER requests
If a REGISTER request with a Call-ID matching an existing transaction is received
it was possible that the REGISTER request would overwrite the initreq of the
private structure. This info is used to generate messages for other responses in
the transaction. This patch ignores REGISTER requests that match non-REGISTER
transactions.
(closes issue #18051)
Reported by: eeman
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/1050/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297972 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297607 | jpeeler | 2010-12-06 16:06:37 -0600 (Mon, 06 Dec 2010) | 25 lines
Merged revisions 297605 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297605 | jpeeler | 2010-12-06 16:03:04 -0600 (Mon, 06 Dec 2010) | 18 lines
Merged revisions 297603 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297603 | jpeeler | 2010-12-06 15:57:15 -0600 (Mon, 06 Dec 2010) | 12 lines
Improve handling of REGISTER requests with multiple contact headers.
The changes here attempt to more strictly follow RFC 3261 section 10.3.
Basically the following will now cause a 400 Bad Response to be returned, if:
- multiple Contact headers are present with one set to expire all bindings ("*")
- wildcard parameter is specified for Contact without Expires header or Expires
header is not set to zero.
ABE-2442
ABE-2443
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297075 | jpeeler | 2010-12-01 11:53:13 -0600 (Wed, 01 Dec 2010) | 37 lines
Merged revisions 297073 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297073 | jpeeler | 2010-12-01 11:52:46 -0600 (Wed, 01 Dec 2010) | 30 lines
Merged revisions 297072 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297072 | jpeeler | 2010-12-01 11:50:09 -0600 (Wed, 01 Dec 2010) | 23 lines
Fix not stopping MOH when transfered local channel queue member is answered.
The problem here is only present when local channels are used with the MOH
passthru option as well as no optimization (/nm). I will describe the slightly
bizarre scenario that was used to test, where phones B and C are queue members:
Phone A dials into a queue with two members using local channels and the above
options. Phone B answers. Phone A blind transfers phone B into the same queue.
Phone A hangs up. Phone C answers, but phone B didn't stop playing MOH.
In this scenario, the unhold frame that should have gotten to phone B never
arrived due to the masquerade from the blind transfer. This is usually fine
since app_queue manages the starting and stopping of MOH. However, with the
passthrough option enabled when app_queue attempts to stop MOH it tries to do
so on the local channel rather than the real channel. The easiest solution
was to just make sure to send an unhold frame during the transfer since it
wouldn't make sense to have MOH playing after a transfer anyway. This only
modifies SIP transfers, but the other transfers did not seem to be a problem.
If DTMF based transfers were a problem it might be okay to add ast_moh_stop
to finishup, but I didn't want to have to add that unless required.
ABE-2624
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r296628 | russell | 2010-11-29 15:26:44 -0600 (Mon, 29 Nov 2010) | 6 lines
Complete some error handling in transmit_publish() in chan_sip.c.
This error handling block caught my eye. It was missing a couple of things,
but it should be safe now. Thanks to mmichelson for the quick peer review
on IRC.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r296352 | marquis | 2010-11-26 13:19:02 -0500 (Fri, 26 Nov 2010) | 12 lines
Fix reloading of peer when a user is requested.
Prevent peer reloading from causing multiple MWI subscriptions to be created when using realtime. This had the effect of sending one NOTIFY for every time a sip peer made a call, in one case eventually overwhelming the phone and causing it to reboot.
(closes issue #18342)
Reported by: nivek
Patches:
issue0018342p1.patch uploaded by nivek (license 636)
Tested by: nivek
Review: https://reviewboard.asterisk.org/r/1029/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294734 | jpeeler | 2010-11-11 15:58:25 -0600 (Thu, 11 Nov 2010) | 32 lines
Merged revisions 294733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294733 | jpeeler | 2010-11-11 15:57:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294688 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294688 | jpeeler | 2010-11-11 15:12:27 -0600 (Thu, 11 Nov 2010) | 18 lines
Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time. This
scenario has the potential to progress to the point of saturating a link just
from options packets. The fix was to ensure that the poke scheduler checks to
see if a peer is in the peer list before continuing to poke. The reason a peer
must be in the peer list to be able to properly manage an options dialog is
because otherwise the call pointer is lost when the peer is regenerated from
the database, which is how existing qualify dialogs are detected.
(closes issue #16382)
(closes issue #17779)
Reported by: lftsy
Patches:
bug16382-3.patch uploaded by jpeeler (license 325)
Tested by: zerohalo
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC3261 section 12 about dialog creation says an INVITE transaction
results in an established dialog once it receives the 200 OK response.
It is possible to receive multiple differing 200 OK responses for a
single outbound INVITE Request, and this should result in establishing
multiple dialogs.
This patch allows for all differing 200 OK responses to an INVITE request
to establish a separate dialog, but only the first dialog is kept. All other
resulting dialogs from the initial request are immediately ACKed and then
immediately terminated with a BYE request.
Review: https://reviewboard.asterisk.org/r/946/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293305 | jpeeler | 2010-10-29 16:48:38 -0500 (Fri, 29 Oct 2010) | 9 lines
Modify sip_setoption to not complain about unknown options.
This now behaves just like the other setoption callbacks. For the curious the
offending option for the reporter was AST_OPTION_CHANNEL_WRITE which was getting
passed due to a fix for chan_local in 286189.
(closes issue #17985)
Reported by: globalnetinc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292309 | twilson | 2010-10-19 12:27:32 -0700 (Tue, 19 Oct 2010) | 10 lines
Add sip show peer info about crypto and remove dated comment
This patch adds information about the encryption setting to 'sip show
peers' and removes an out-of-date comment from res_srtp.c and instead
directs users to the proper documentation.
(closes issue #18140)
Reported by: chodorenko
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291758 | pabelanger | 2010-10-14 11:15:12 -0400 (Thu, 14 Oct 2010) | 11 lines
Add the ability for ast_find_ourip to return IPv4, IPv6 or both.
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289701 | jpeeler | 2010-10-01 11:22:19 -0500 (Fri, 01 Oct 2010) | 28 lines
Merged revisions 289700 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289700 | jpeeler | 2010-10-01 11:21:04 -0500 (Fri, 01 Oct 2010) | 21 lines
Merged revisions 289699 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289699 | jpeeler | 2010-10-01 11:20:00 -0500 (Fri, 01 Oct 2010) | 14 lines
Ensure user portion of SIP URI matches dialplan when using encoded characters.
This commit takes a simliar approach to 288112 and checks the dialplan to
determine the proper action for an incoming contact header as to whether or not
it should be decoded or not. sip_new was blindly always decoding the extension,
which also caused the outgoing contact header to be incorrect as well as failing
to match the encoded extension in the dialplan.
(closes issue #17892)
Reported by: wdoekes
Patches:
bug17892-1.patch uploaded by jpeeler (license 325)
Tested by: wdoekes
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On every incoming subscribe there is a iteration through all dialogs to find old subscribes and delete them. This is slow and not RFC conform. This was only needed in 1.2 cause a subscribe was not deleted when a dialog was destroyed, after 1.4 a subscribe get removed when its dialog is destroyed.
Review: https://reviewboard.asterisk.org/r/901/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r288159 | tilghman | 2010-09-21 17:57:22 -0500 (Tue, 21 Sep 2010) | 29 lines
Merged revisions 288113 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288113 | tilghman | 2010-09-21 16:59:46 -0500 (Tue, 21 Sep 2010) | 22 lines
Merged revisions 288112 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288112 | tilghman | 2010-09-21 16:58:13 -0500 (Tue, 21 Sep 2010) | 15 lines
Try both the encoded and unencoded subscription URI for a match in hints.
When a phone sends an encoded URI for a subscription, the URI is not matched
with the actual hint that is in decoded format. For example, if we have an
extension with a hint that is named: "#5601" or "*5601", the subscription will
work fine if the phone subscribes with an already decoded URI, but when it's
decoded like "%255601" or "%2A5601", Asterisk is unable to match it with the
correct hint.
(closes issue #17785)
Reported by: ramonpeek
Patches:
20100831__issue17785.diff.txt uploaded by tilghman (license 14)
Tested by: ramonpeek
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288160 65c4cc65-6c06-0410-ace0-fbb531ad65f3
adding two dialog container, one for dialogs which need destroy, another for rtptimeout checks.
both container will be checked on every loop of do_monitor instead of iterate through all dialogs.
(closes issue #17912)
Reported by: schmidts
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286931 | jpeeler | 2010-09-15 14:22:15 -0500 (Wed, 15 Sep 2010) | 16 lines
Add parking extension for non-default parking lots.
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286868 | mnicholson | 2010-09-15 08:05:52 -0500 (Wed, 15 Sep 2010) | 16 lines
Set tohost to the domain specified in the configuration file instead of the IP address of the host we are calling.
This fixes a regression introduced in r274783.
(closes issue #17960)
Reported by: adriavidal
Patches:
sip-tohost-fix1.diff uploaded by mnicholson (license 96)
Tested by: mich, mnicholson, adriavidal
(closes issue #17676)
Reported by: outcast
Patches:
sip-tohost-fix1.diff uploaded by mnicholson (license 96)
Tested by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285564 | dvossel | 2010-09-08 16:48:37 -0500 (Wed, 08 Sep 2010) | 60 lines
Merged revisions 285563 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r285563 | dvossel | 2010-09-08 16:47:29 -0500 (Wed, 08 Sep 2010) | 54 lines
Fixes interoperability problems with session timer behavior in Asterisk.
CHANGES:
1. Never put "timer" in "Require" header. This is not to our benefit
and RFC 4028 section 7.1 even warns against it. It is possible for one
endpoint to perform session-timer refreshes while the other endpoint does
not support them. If in this case the end point performing the refreshing
puts "timer" in the Require field during a refresh, the dialog will
likely get terminated by the other end.
2. Change the behavior of 'session-timer=accept' in sip.conf (which is
the default behavior of Asterisk with no session timer configuration
specified) to only run session-timers as result of an incoming INVITE
request if the INVITE contains an "Session-Expires" header... Asterisk is
currently treating having the "timer" option in the "Supported" header as
a request for session timers by the UAC. I do not agree with this. Session
timers should only be negotiated in "accept" mode when the incoming INVITE
supplies a "Session-Expires" header, otherwise RFC 4028 says we should
treat a request containing no "Session-Expires" header as a session with
no expiration.
Below I have outlined some situations and what Asterisk's behavior is.
The table reflects the behavior changes implemented by this patch.
SITUATIONS:
-Asterisk as UAS
1. Incoming INVITE: NO "Session-Expires"
2. Incoming INVITE: HAS "Session-Expires"
-Asterisk as UAC
3. Outgoing INVITE: NO "Session-Expires". 200 Ok Response HAS "Session-Expires" header
4. Outgoing INVITE: NO "Session-Expires". 200 Ok Response NO "Session-Expires" header
5. Outgoing INVITE: HAS "Session-Expires".
Active - Asterisk will have an active refresh timer regardless if the other endpoint does.
Inactive - Asterisk does not have an active refresh timer regardless if the other endpoint does.
XXXXXXX - Not possible for mode.
______________________________________
|SITUATIONS | 'session-timer' MODES |
|___________|________________________|
| | originate | accept |
|-----------|------------|-----------|
|1. | Active | Inactive |
|2. | Active | Active |
|3. | XXXXXXXX | Active |
|4. | XXXXXXXX | Inactive |
|5. | Active | XXXXXXXX |
--------------------------------------
(closes issue #17005)
Reported by: alexrecarey
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r285006 | dvossel | 2010-09-03 17:21:50 -0500 (Fri, 03 Sep 2010) | 9 lines
Disables auth_options_request option by default.
The auth_options_request option was created to do authentication
on OPTIONS request just like INVITES are done. Since it has been
noted that some endpoints use OPTIONS requests as a way of qualifying
a peer and that a 401 authentication response could result in
interoperability issues, this option has been disabled by default.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284950 | dvossel | 2010-09-03 12:29:02 -0500 (Fri, 03 Sep 2010) | 14 lines
authenticate OPTIONS requests just like we would an INVITE
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284561 | dvossel | 2010-09-01 16:47:01 -0500 (Wed, 01 Sep 2010) | 9 lines
During request to dialog matching, verify init_ruri is present before comparing.
During request to dialog matching, we attempt a best effort routine for fork
detection which requires several elements to be in place. The dialog's
initial request uri is one of those elements. Since it is best effort,
if the init_ruri is not present for some reason we can not proceed with that
routine.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284562 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283692 | dvossel | 2010-08-26 10:26:37 -0500 (Thu, 26 Aug 2010) | 32 lines
Merged revisions 283691 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283691 | dvossel | 2010-08-26 10:24:40 -0500 (Thu, 26 Aug 2010) | 25 lines
Merged revisions 283690 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283690 | dvossel | 2010-08-26 10:22:28 -0500 (Thu, 26 Aug 2010) | 19 lines
Fixed how Asterisk destroys a dialog on channel hangup before invite receives a response.
If an ast_channel with a SIP tech pvt hangs up before the sip dialog gets a response
to its outgoing INVITE, Asterisk used to pretend_ack the INVITE. This is not rfc
compliant and results in confusion at the other endpoint. sip_pretend_ack will ack
and remove all the packets in the retransmit queue. This means that the INVITE will
stop retransmitting, and that any response to that INVITE that comes after the pretend_ack
occurs will be ignored.
Instead of faking any sort of acknowledgement for an outgoing INVITE during an internal
hangup, we should let the protocol stack process the INVITE transaction and terminate
the dialog properly. This is achieved by setting the PENDING_BYE flag. When this flag
is used, once the dialog proceeds to an escapable state the transaction will either be
canceled with a SIP_CANCEL or completed followed immediately by a BYE. Attempting to do
this any other way is incorrect. If the endpoint is not responding to the INVITE request,
the INVITE must continue to be retransmitted until it times out which will result in the
dialog being destroyed.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283595 | dvossel | 2010-08-25 17:57:56 -0500 (Wed, 25 Aug 2010) | 14 lines
Merged revisions 283594 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283594 | dvossel | 2010-08-25 17:56:42 -0500 (Wed, 25 Aug 2010) | 7 lines
Add to and from tags to NOTIFY dialog-info xml body so pickup can occur.
When pedantic mode is used, the dialog-info xml generated during a
ringing event must contain the to and from tag values. Otherwise if
a pickup occurs using INVITE with replaces, Astrisk will not be able
to locate the subscription.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283559 | dvossel | 2010-08-25 10:54:11 -0500 (Wed, 25 Aug 2010) | 16 lines
Merged revisions 283558 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283558 | dvossel | 2010-08-25 10:52:54 -0500 (Wed, 25 Aug 2010) | 10 lines
Asterisk will not advertise session timers are supported when 'session-timers=refuse' is used.
Asterisk now dynamically builds the "Supported" header depending
on what is enabled/disabled in sip.conf. Session timers used
to always be advertised as being supported even when they were disabled
in the configuration. This caused problems with some end points.
(issue #17005)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283382 | dvossel | 2010-08-24 11:11:18 -0500 (Tue, 24 Aug 2010) | 25 lines
Merged revisions 283381 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283381 | dvossel | 2010-08-24 11:07:37 -0500 (Tue, 24 Aug 2010) | 18 lines
Merged revisions 283380 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283380 | dvossel | 2010-08-24 11:01:51 -0500 (Tue, 24 Aug 2010) | 11 lines
This fix makes sure the ast_channel hangs up correctly when the dialog's PENDING_BYE flag is set.
When the pending bye flag is used, it is possible that the dialog will terminate
and leave the sip_pvt->owner channel up. This is because we never hangup the
ast_channel after sending the SIP_BYE request. When we receive the response for
the SIP_BYE we set need_destroy which we would expect to destroy the dialog on the
next do_monitor loop, but this is not the case. The dialog will only be destroyed
once the owner is hungup even with the need_destroy flag set. This patch sets the
softhangup flag on the ast_channel when a SIP_BYE request is sent as a result of the
pending bye flag.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282895 | dvossel | 2010-08-19 16:07:20 -0500 (Thu, 19 Aug 2010) | 25 lines
Merged revisions 282894 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282894 | dvossel | 2010-08-19 16:05:54 -0500 (Thu, 19 Aug 2010) | 18 lines
Merged revisions 282893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282893 | dvossel | 2010-08-19 16:03:24 -0500 (Thu, 19 Aug 2010) | 11 lines
tos_sip option was not being set correctly
When tos_sip is used, the tos of the sip socket is only set
correctly if the socket binding changes on a reload. If the binding
stays the same but the TOS changes, the new tos value would not take
into effect. This patch fixes that.
(closes issue #17712)
Reported by: nickb
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282639 | mnicholson | 2010-08-18 08:10:39 -0500 (Wed, 18 Aug 2010) | 13 lines
Properly handle 200 and unknown responses conatined in NOTIFY requests received in response to REFER requests.
This patch fixes the way asterisk handles NOTIFY requests received in response to REFER requests. These changes to NOTIFY handler were first introduced in r217482. This new change properly handles the 200 response by queueing an AST_TRANSFER_SUCCESS control frame and also prevents that control frame from being queued when provisional and unknown responses are received.
(issue #17486)
Reported by: davidw
Tested by: mnicholson
(issue #12713)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/860/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282236 | dvossel | 2010-08-13 13:58:10 -0500 (Fri, 13 Aug 2010) | 23 lines
Merged revisions 282235 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r282235 | dvossel | 2010-08-13 13:54:53 -0500 (Fri, 13 Aug 2010) | 16 lines
only do magic pickup when notifycid is enabled
A new way of doing BLF pickup was introduced into 1.6.2. This feature
adds a call-id value into the XML of a SIP_NOTIFY message sent to alert
a subscriber that a device is ringing. This option should only be enabled
when the new 'notifycid' option is set... but this was not the case. Instead
the call-id value was included for every RINGING Notify message, which
caused a regression for people who used other methods for call pickup.
(closes issue #17633)
Reported by: urosh
Patches:
chan_sip.txt uploaded by urosh (license )
blf_cid_issue.diff uploaded by dvossel (license 671)
Tested by: dvossel, urosh, okrief, alecdavis
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281432 | dvossel | 2010-08-09 15:47:53 -0500 (Mon, 09 Aug 2010) | 20 lines
Merged revisions 281430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r281430 | dvossel | 2010-08-09 15:46:50 -0500 (Mon, 09 Aug 2010) | 13 lines
fixes SIP peers memory leak
We zeroed out the peer's addr before it was removed from the
peers_by_ip container. This made it impossible to be removed
from the container as the addr is the key used by the container
to find the peer.
(closes issue #17774)
Reported by: kkm
Patches:
017774-sip-peer-leak-1.6.2.10.diff uploaded by kkm (license 888)
017774-sip-peer-leak-1.8.diff uploaded by kkm (license 888)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279887 | mmichelson | 2010-07-27 13:54:07 -0500 (Tue, 27 Jul 2010) | 16 lines
Fix parsing error in sip_sipredirect().
The code was written in a way that did a bad job of
parsing the port out of a URI. Specifically, it would
do badly when dealing with an IPv6 address. In this
particular scenario, there was no value from parsing
the port out, so I just removed that logic. And while
I was messing around in the function, I changed some
variable names to be more descriptive.
(closes issue #17661)
Reported by: oej
Patches:
17661.diff uploaded by mmichelson (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279785 | mmichelson | 2010-07-27 10:15:22 -0500 (Tue, 27 Jul 2010) | 20 lines
Merged revisions 279784 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r279784 | mmichelson | 2010-07-27 10:13:24 -0500 (Tue, 27 Jul 2010) | 14 lines
Fix bad behavior of dynamic_exclude_static option in sip.conf.
We were attempting to create a contactdeny rule based on the peer's
IP address before the peer's IP address had been set. By moving the
processing further down in the function, we can ensure stuff works
as we expect for it to.
(closes issue #17717)
Reported by: mmichelson
Patches:
17717.patch uploaded by mmichelson (license 60)
Tested by: DennisD
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279786 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279568 | dvossel | 2010-07-26 14:59:03 -0500 (Mon, 26 Jul 2010) | 21 lines
transaction matching using top most Via header
This patch modifies the way chan_sip.c does transaction to dialog
matching. Asterisk now stores information in the top most Via header
of the initial incoming request and compares that against other Requests
that have the same call-id. This results in Asterisk being able to
detect a forked call in which it has received multiple legs of the
fork. I completely stripped out the previous matching code and made
the comparisons a little more explicit and easier to understand. My
comments in the code should offer all the details involving this patch.
This patch also fixes a bug with the usage of the OBJ-MULTIPLE flag to
find multiple dialogs with the same call-id. Since the callback
function was returning (CMP_MATCH | CMP_STOP) only the first item
found was being returned. I fixed this by making a new callback
function for finding multiple dialogs that only returns (CMP_MATCH)
on a match allowing for multiple items to be returned.
Review: https://reviewboard.asterisk.org/r/776/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This initially was created to work around the issue of
using a string comparison instead of a binary comparison
for IP addresses. It evolved a bit when test cases were
created and it was discovered that comparison of URI
parameters was not working exactly as it should.
sip_uri_cmp() and its helpers have been moved to reqresp_parser.c
and a new test has been added.
(closes issue #17662)
Reported by: oej
Review: https://reviewboard.asterisk.org/r/792
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
[RFC3265]3.1.6.1....
The notifier MAY also check that the duration in the "Expires" header
is not too small. If and only if the expiration interval is greater
than zero AND smaller than one hour AND less than a notifier-
configured minimum, the notifier MAY return a "423 Interval too
small" error which contains a "Min-Expires" header field. The "Min-
Expires" header field is described in SIP [1].
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If Asterisk sends a 4xx error and the other side sends a CANCEl
before receiving the 4xx and responding with the ACK, Asterisk
will process the CANCEL and send a 487 Request Terminated as
a new final response to the INVITE. Since we are issuing a new
final response to the INVITE, the old one must be pretend_acked
else it will keep retransmitting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two changes here:
1. Since the externip setting can now have a port attached
to it, calling it "externip" is misleading. The option is now
documented and parsed as "externaddr." This also extends to the
"matchexterniplocally" setting. It is now documented and parsed
as "matchexternaddrlocally." The old names for the options may
still be used, but they are no longer used in the sip.conf.sample
file.
2. If no port is set for the externaddr, and UDP is the transport
to be used, then we will set the port of the externaddr to that of
the udpbindaddr. This was how things worked prior to the IPv6 merge,
so this is a regression fix.
(closes issue #17665)
Reported by: mmichelson
Patches:
17665.diff#2 uploaded by pprindeville (license 347)
Tested by: pprindeville
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277497 | mnicholson | 2010-07-16 16:18:38 -0500 (Fri, 16 Jul 2010) | 4 lines
Default to no udptl error correction so that error correction will be disabled in the event that the remote end indicates that they do not support the error correction mode we requested.
FAX-128
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Found a unused bag of curly brackets under my table. I always wondered where
they had gone. They where indeed needed in chan_sip.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Related to changes from 276571, I was accidentally testing with a port set in
my configuration causing me to miss this. Also moved the TCP handling as well
to occur before build_peer is called.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MWI updates were not being sent if no messages were found in the event cache.
This was corrected since a phone may need to clear its MWI status configured
previously from another mailbox.
Upon module or sip reload, MWI updates could not be sent due to the sipsock
socket not being set early enough in reload_config. The code handling the
descriptor assignment and such has simply been moved before the call to
build_peer.
Issuing a sip reload cleared the IP address of the peer, but skipped checking
the database for registration information. The database is now checked both
for sip reload and actually reloading the module.
If a transmission occurs before the do_monitor thread has started, do not
attempt to send a signal to it.
(closes issue #17398)
Reported by: ip-rob
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3