https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321155 | markm | 2011-05-26 17:48:45 -0400 (Thu, 26 May 2011) | 10 lines
Fixed build problem with dev mode enabled, which was caused by commit 321100. Reformulated patch to be more generic.
Moved the sip uri parse variable initalization to parse_uri_full in reqresp_parser.c. This will ensure that any use of parse uri will have null output variables if the parse fails.
(closes issue #19346)
Reported by: kobaz
Tested by: kobaz,JonathanRose
Review: [full review board URL with trailing slash]
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321156 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321100 | markm | 2011-05-26 16:09:35 -0400 (Thu, 26 May 2011) | 11 lines
ast_sockaddr_resolve() in netsock2.c may deref a null pointer
Added a null check in netsock2 ast_sockaddr_resolve() as well as added default initalizers in chan_sip parse_uri_legacy_check() to make sure that invalid uris will make null (and not undefined) user,pass,domain,transport variables
(closes issue #19346)
Reported by: kobaz
Patches:
netsock2.patch uploaded by kobaz (license 834)
Tested by: kobaz, Marquis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320883 | rmudgett | 2011-05-25 17:25:18 -0500 (Wed, 25 May 2011) | 17 lines
Native SIP CCSS sends bad CC cancel SUBSCRIBE message.
The SUBSCRIBE message used to cancel a CC request has incorrect To/From
SIP headers. They are reversed and the dialog tags are the same when they
should not be. If pedantic mode was disabled, then the cancel would have
succeeded despite the incorrect message.
* The SIP_OUTGOING flag was not set correctly for the dialog and I had to
move some CC subscribe handling code as a result.
* Initialized the dialog subscribed type to CALL_COMPLETION earlier. If a
CC request SUBSCRIBE message comes in and the CC instance is not found,
the 404 response was duplicated.
JIRA AST-568
JIRA SWP-3493
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320180 | mnicholson | 2011-05-20 13:48:46 -0500 (Fri, 20 May 2011) | 16 lines
This commit modifies the way polling is done on TLS sockets.
Because of the buffering the TLS layer does, polling is unreliable. If poll is
called while there is data waiting to be read in the TLS layer but not at the
network layer, the messaging processing engine will not proceed until something
else writes data to the socket, which may not occur. This change modifies the
logic around TLS sockets to only poll after a failed read on a non-blocking
socket. This way we know that there is no data waiting to be read from the
buffering layer.
(closes issue #19182)
Reported by: st
Patches:
ssl-poll-fix3.diff uploaded by mnicholson (license 96)
Tested by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319938 | jrose | 2011-05-20 08:28:24 -0500 (Fri, 20 May 2011) | 12 lines
Adds legacy_useroption_parsing to address interoperability concerns.
With the new option engaged, Asterisk should interpret user fields with useroptions
contained within the userfield of the uri by stripping them out of the original message
whenever a semicolon is encountered in the userfield string.
(closes issue #18344)
Reported by: danimal
Tested by: jrose
Review: https://reviewboard.asterisk.org/r/1223/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r319654 | twilson | 2011-05-18 16:15:58 -0700 (Wed, 18 May 2011) | 22 lines
Merged revisions 319653 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r319653 | twilson | 2011-05-18 16:11:57 -0700 (Wed, 18 May 2011) | 15 lines
Merged revisions 319652 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r319652 | twilson | 2011-05-18 16:04:35 -0700 (Wed, 18 May 2011) | 8 lines
Make sure everyone gets an unhold when a transfer succeeds
Some phones, like the Snom phones, send a hold to the transfer target after
before sending the REFER. We need to make sure that we unhold the parties
that are being connected after the masquerade. If Local channels with the /nm
option are used when dialing the parties, hold music would still be playing on
the transfer target, even after being connected with the transferee.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319552 | twilson | 2011-05-18 13:22:36 -0700 (Wed, 18 May 2011) | 11 lines
Unbreak the storing of registrations for restart
The fix for issue 18882 broke retrieving non-realtime peers from the ast_db
on restart/reload. This patch tries to unbreak things while leaving the intent
of the original fix intact.
(closes issue #19318)
Reported by: remiq
Patches:
diff.txt uploaded by twilson (license 396)
Tested by: lmadsen, remiq
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r319469 | rmudgett | 2011-05-17 16:57:56 -0500 (Tue, 17 May 2011) | 22 lines
Merged revision 319468 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r319468 | rmudgett | 2011-05-17 16:49:31 -0500 (Tue, 17 May 2011) | 15 lines
The mISDN HDLC mode is prevented on dialed channels.
The use of mISDN HDLC mode is prevented if the mISDN dial technology
option 'h1' is used when config option astdtmf=yes.
There is a bug in channels/misdn/isdn_lib.c which prevents the use of HDLC
mode. Instead of setting the channel to HDLC mode it is set to
transparent(no dsp, no hdlc), although hdlc is not "no hdlc". I.e the
logging message is correct, but the if condition is not.
Make check the nodsp and hdlc flags.
JIRA ABE-2787
JIRA SWP-3437
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Probably haven't been working for a couple of years. May still need
some more love, but they are now working, both as a hint device and
monitoring a hint. Changes centre around the long ago change
to remove the requirement for a device name in a skinny line, and
changes to the transmit_* functions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
state of the channel reverts to unknown this should be rejected.
this is important for negotiating T.38 gateway see #13405
This patch adds a option T38_REJECTED that behaves as T38_DISABLED except it reports state rejected.
Trivial Change to res_fax to honnor UNAVAILABLE and REJECTED states.
(closes issue #18889)
Reported by: irroot
Tested by: irroot, darkbasic, mnicholson
Review: https://reviewboard.asterisk.org/r/1115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When called, activatesub first cleans up the active sub and then
handles the sub passed. dialandactivatesub first sets sub->exten
and then calls activatesub. Revise handle_offhook to utilise the
callid sent to chan_skinny. Some other minor fixes especially around
d->hookstate (which still needs some more work).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some issues where if a simple switch was cancelled and a
new switch started before the first had timed out where the d->exten
would be used for both subchannels. This was bad leading to possible
invalid extensions if some digits had been entered in the abandoned
simple switch and the second one was completed before the first timed
out, or the second would be cancelled because d->exten would be set to
nothing on the time out of the first.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318783 | rmudgett | 2011-05-12 20:47:05 -0500 (Thu, 12 May 2011) | 14 lines
PRI early media won't ring.
And another way to pass early media. Don't indicate that there is inband
information present, just assume that the B channel is connected.
* Restore clearing the dialing flag Rx squelch unconditionally when a
PROCEEDING message comes in.
(closes issue #19268)
Reported by: tbsky
Patches:
issue19268_v1.8.patch uploaded by rmudgett (license 664)
Tested by: tbsky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318671 | alecdavis | 2011-05-13 10:52:08 +1200 (Fri, 13 May 2011) | 30 lines
Fix directed group pickup feature code *8 with pickupsounds enabled
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidate the functions and add some debugging info. Allows to be
able to set a substate without explicitly knowing what the state is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the setsubstate_onhook to complete the initial substate handling
procedures. Added dumpsub(sub, forcehangup) which is the common way of
calling setsubstate_onhook. Dumpsub attempts to activate another sub
after setting the current one onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318549 | twilson | 2011-05-11 13:39:48 -0500 (Wed, 11 May 2011) | 27 lines
Merged revisions 318548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318548 | twilson | 2011-05-11 12:15:39 -0500 (Wed, 11 May 2011) | 19 lines
Clean up several chan_sip reference leaks
Several situations in the code could lead to peers or sip_pvt references
being leaked. This would cause RTP ports to never be destroyed (leading
to exhaustion of all available RTP ports) and memory leaks.
The original patch for this issue from rgagnon was the result of an
obscene amount of testing and hard work, for which I am very grateful. I
did some cleanup and added a few additional refcount fixes that I found.
(closes issue #17255)
Reported by: kvveltho
Patches:
tag-1.6.2.17-r309252-sip-dos-mem-leak-fix.diff uploaded by rgagnon (license 1202)
Tested by: rgagnon, twilson, wdoekes, loloski
Review: https://reviewboard.asterisk.org/r/1101/
Review: https://reviewboard.asterisk.org/r/1207/
Review: https://reviewboard.asterisk.org/r/1210/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318499 | rmudgett | 2011-05-10 18:41:08 -0500 (Tue, 10 May 2011) | 15 lines
Unable to pickup DAHDI/PRI call because call state is reported as DIALING.
The channel state is not updated to RINGING when an ALERTING message is
received. Regression caused when sig_pri.c (also sig_ss7.c) extracted
from chan_dahdi.c.
* Added missing channel state update to RINGING when the
AST_CONTROL_RINGING frame is queued for ISDN and SS7.
(closes issue #19257)
Reported by: alecdavis
Patches:
issue19257_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318337 | twilson | 2011-05-09 15:23:15 -0500 (Mon, 09 May 2011) | 18 lines
Merged revisions 318331 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318331 | twilson | 2011-05-09 15:04:41 -0500 (Mon, 09 May 2011) | 12 lines
Don't offer video to directmedia callee unless caller offered it as well
Make sure that when directmedia is enabled, that video is not offered to the
callee even if it supports it. p->vrtp will not exist since the caller didn't
offer video.
(closes issue #19195)
Reported by: one47
Patches:
sip_cant_add_video_rtp uploaded by one47 (license 23)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318231 | rmudgett | 2011-05-09 11:57:18 -0500 (Mon, 09 May 2011) | 41 lines
Don't get early media for ISDN on outgoing calls.
It looks to be a long-standing misinterpretation of the progress indicator
ie values:
1 - Call is not end-to-end ISDN; further call progress information may be
available in-band.
8 - In-band information or an appropriate pattern is now available.
Only value 8 is handled by chan_dahdi/sig_pri. The 1 value is not handled
as early media probably because the meaning of the second half of it's
description was overlooked.
* Test to see if either PRI_PROG_CALL_NOT_E2E_ISDN(1) or
PRI_PROG_INBAND_AVAILABLE(8) bits are set to open the media path.
(closes issue #18868)
Reported by: isrl
Patches:
issue18868_19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: satish_lx
..........
No inband progress on PRI_EVENT_RINGING even if inband flag set.
My ISDN-PRI provider sends an ALERTING with "Inband information or
appropriate pattern now available", but Asterisk only generates and passes
the RING to the SIP extension, not the inband message. Unfortunately, the
inband message is not a ringback tone but a prompt that says the number is
not in service. The SIP extension then hears two rings and the call is
hungup which confuses the caller.
* Post an AST_CONTROL_PROGRESS as well as opening the media path if inband
audio is indicated with an ALERTING message.
(closes issue #19246)
Reported by: cristiandimache
Patches:
issue19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: cristiandimache
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a call is made to a line that already has a call and the device is
offhook (ie activeish call), the call is set to CALLWAIT rather than RINGIN.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Long time coming, finally moving the hookstate from line to device.
This may fix some issues where a device has multiple lines. Previously
we had to run through all lines on a device to see if it was actually
onhook or not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317867 | russell | 2011-05-06 15:01:16 -0500 (Fri, 06 May 2011) | 10 lines
chan_sip: Destroy variables on a sip_pvt before copying vars from the sip_peer.
Don't duplicate variables on the sip_pvt. Just reset the variable list each
time.
(closes issue #19202)
Reported by: wdoekes
Patches:
issue19202_destroy_challenged_invite_chanvars.patch uploaded by wdoekes (license 717)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317865 | russell | 2011-05-06 14:46:49 -0500 (Fri, 06 May 2011) | 11 lines
chan_sip: fix a deadlock in check_rtp_timeout.
Don't block doing silly deadlock avoidance. Just return and try again later.
The funciton gets called often enough that it's fine. Also, this change was
already made in trunk.
(closes issue #18791)
Reported by: irroot
Patches:
chan_sip.rtptimeout.patch uploaded by irroot (license 52)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317670 | rmudgett | 2011-05-06 11:19:18 -0500 (Fri, 06 May 2011) | 22 lines
Fix SIP connected line updates.
This patch fixes a couple SIP connected line update problems:
1) The connected line needs to be updated when the initial INVITE is sent
if there is a peer callerid configured. Previously, the connected line
information did not get reported until the call was connected so SIP could
not report connected line information in ringing or progress messages.
2) The connected line should not be updated on initial connect if there is
no connected line information. Previously, all it did was wipe out any
default preset CONNECTEDLINE information set by the dialplan with empty
strings.
(closes issue #18367)
Reported by: GeorgeKonopacki
Patches:
issue18367_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1199/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
skinny_hold moved to setsubstate_hold and skinny_unhold integrated into
setsubstate_connected. Removed sub->onhold and replaced with
SUBSTATE_HOLD.
Also fixed inbound call answering by queueing an AST_CONTROL_ANSWER on
answering a SUBSTATE_RINGIN sub (was a typo).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317283 | jrose | 2011-05-05 14:09:13 -0500 (Thu, 05 May 2011) | 10 lines
Resolves a deadlock that occurs during sip_new
This is based on an uncommitted patch by jpeeler for the issue. Instead of
relocking and then unlocking the channel though, we keep the lock on the channel
until we are finished doing what we need to the channel.
(closes issue #18441)
Reported by: Alric
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317334 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r317281 | russell | 2011-05-05 13:39:44 -0500 (Thu, 05 May 2011) | 29 lines
Merged revisions 317255 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r317255 | russell | 2011-05-05 13:29:53 -0500 (Thu, 05 May 2011) | 22 lines
Merged revisions 317211 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r317211 | russell | 2011-05-05 13:20:29 -0500 (Thu, 05 May 2011) | 15 lines
chan_sip: fix broken realtime peer count, fix memory leak
This patch addresses two bugs in chan_sip:
1) The count of realtime peers and users was off. The increment checked the
value of the caching option, while the decrement did not.
2) Add a missing regfree() for a regex.
(closes issue #19108)
Reported by: vrban
Patches:
missing_regfree.patch uploaded by vrban (license 756)
sip_object_counter.patch uploaded by vrban (license 756)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317196 | mnicholson | 2011-05-05 13:02:52 -0500 (Thu, 05 May 2011) | 8 lines
Set SO_KEEPALIVE on SIP TCP sockets so that they eventually go away when a peer
abruptly disappears. This mostly occurs after a successful registration.
(closes issue #17544)
Reported by: marcelloceschia
Patches:
(modified) tcptls.patch uploaded by st (license 907)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of both state handling from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants for congestion. Added various states to
substate2str and added these states where applicable for other set_substate_
procs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317026 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of setting busy state from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants (eg busy(10); hangup() in the dialplan
now gives a busy indication for 10 secs and then hangs up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Renamed previous setsubstate_ringout to setsubstate_dialing for a state
when attempting to dial a number, substate ringout now for when core
has indicated that the channel is actually ringing on the other end.
Also added substate2str for debugging purposes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r316617 | dvossel | 2011-05-04 08:44:41 -0500 (Wed, 04 May 2011) | 19 lines
Merged revisions 316616 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r316616 | dvossel | 2011-05-04 08:40:41 -0500 (Wed, 04 May 2011) | 12 lines
Fixes session-timers=refuse not being enforced for *caller*
During handle_request_invite, the session timer mode was retrieved from
a cached variable. This patch forces a peer lookup of the session timer
mode in the case of an incoming invite.
(closes issue #18804)
Reported by: wdoekes
Patches:
issue18804_session_timer_refuse_caller.patch uploaded by wdoekes (license 717)
issue_18804_v2.diff uploaded by dvossel (license 671)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added setsubstate_ringin. skinny_call now calls sss_ringin rather than inline.
Fixed previous issue so that setsubstate_connected now use SUBSTATE_RINGIN
to determine is an AST_CONTROL_ANSWER should be queued.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the code so that skinny_answer now uses the setsubstate procedures
rather than doing the handling inline.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the working out of the callinfo to be sent into
transmit_callinfo. Replaced ambiguous sub->outgoing with calldirection
which can be SKINNY_INCOMING or SKINNY_OUTGOING (same value as the
skinny protocol).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original implementation of this did the merging of all contexts with the
same name in the realtime layer, but that implementation severely breaks
drivers which use the same context name (e.g. iax.conf, type={peer,user}).
Therefore, the implementation needs to do the merging for particular entries
only, based upon what contexts would allow that in the channel driver itself.
This implementation is for chan_sip only, but others could be added in the
future.
(closes issue #17957)
Reported by: marcelloceschia
Patches:
chan-sip_parsing-general_branch162.patch uploaded by marcelloceschia (license 1079)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316224 | rmudgett | 2011-05-03 14:18:30 -0500 (Tue, 03 May 2011) | 16 lines
The dahdi_hangup() call does not clean up the channel fully.
After dahdi_hangup() has supposedly hungup an ISDN channel there is still
traffic on the S0-bus because the channel was not cleaned up fully.
Shuffled the hangup code to include some missing cleanup. Also fixed some
code formatting in the area. I think the primary missing clean up code
was the call to tone_zone_play_tone() to turn off any active tones on the
channel.
(closes issue #19188)
Reported by: jg1234
Patches:
issue19188_v1.8.patch uploaded by rmudgett (license 664)
Tested by: jg1234
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316217 | dvossel | 2011-05-03 13:59:06 -0500 (Tue, 03 May 2011) | 9 lines
Never put the Require: timer header in an Invite.
This has already been discussed and should have been resolved earlier. View
revsion 285565's log for more information about why it is important to not
put timer in the Require header.
(closes issue #18704)
Reported by: mfrager
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315894 | mnicholson | 2011-04-27 14:14:27 -0500 (Wed, 27 Apr 2011) | 28 lines
Merged revisions 315893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315893 | mnicholson | 2011-04-27 14:03:05 -0500 (Wed, 27 Apr 2011) | 21 lines
Merged revisions 315891 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315891 | mnicholson | 2011-04-27 13:57:56 -0500 (Wed, 27 Apr 2011) | 14 lines
Fix our compliance with RFC 3261 section 18.2.2.
This change optimizes the free_via() function and removes some redundant null
checking. It also fixes compliance with RFC 3261 section 18.2.2 by always using
the port specified in the Via header for routing responses (even when maddr is
not set). Also the htons() function is now used when setting the port.
Additional documentation comments have been added in various places to make the
logic in the code clearer.
(closes issue #18951)
Reported by: jmls
Patches:
issue18951_set_proper_port_from_via.patch uploaded by wdoekes (license 717) (modified)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r315446 | russell | 2011-04-26 12:40:23 -0500 (Tue, 26 Apr 2011) | 14 lines
chan_local: resolve a deadlock.
This patch resolves a fairly complex deadlock that can occur with the
combination of chan_local and a dialplan switch, such as dynamic realtime
extensions, which pulls autoservice into the picture when doing a dialplan
lookup.
(closes issue #18818)
Reported by: nic
Patches:
issue18818.patch uploaded by jthurman (license 614)
18818.v1.txt uploaded by russell (license 2)
Tested by: nic, jthurman, kterzi, steve-howes, sysreq, IshMalik
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI
spans. It is similar to the CLI command "pri show spans".
(closes issue #15980)
Reported by: dwery
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314628 | mnicholson | 2011-04-21 13:24:05 -0500 (Thu, 21 Apr 2011) | 27 lines
Merged revisions 314620 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314550 | twilson | 2011-04-20 17:23:04 -0700 (Wed, 20 Apr 2011) | 13 lines
Merged revisions 314549 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314549 | twilson | 2011-04-20 17:17:34 -0700 (Wed, 20 Apr 2011) | 6 lines
Don't allocate more space than necessary for a sip_pkt
This extra allocation is a hold-over from when pkt->data was a
character array. Now that it is an allocated string, just allocate
enough for the sip_pkt.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314067 | dvossel | 2011-04-18 10:23:45 -0500 (Mon, 18 Apr 2011) | 22 lines
Remove the need for deadlock avoidance in chan_sip do_monitor.
Deadlock avoidance between the sip pvt and the pvt->owner is
very difficult. Now that channel's are ao2 objects, this complication
is no longer necessary. It turns out the pvt's msg queue only
exists because of deadlock avoidance (when deadlock avoidance fails
msgs were added to a queue to be processed later), so this goes away as well.
The technique used in the new sip_lock_pvt_full() function should
be used as a template for replacing all locations where deadlock
avoidance occurs between a channel tech_pvt and the pvt's owner.
My hope is that this will begin a reversal of the invalid channel
driver locking architecture we have been using for so long.
This patch also resolves an issue where the pvt->owner gets
unlocked during processing the msg queue.
(closes issue #18690)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/1182/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313780 | rmudgett | 2011-04-14 15:59:56 -0500 (Thu, 14 Apr 2011) | 20 lines
Leftover debug messages unconditionally sent to the console.
Executing Dial(DAHDI/1/18475551212,300,) with the echotraining config
option enabled outputs the following debug messages unconditionally:
Dialing T1847555121 on 1
Dialing www2w on 1
* Made debug messages in my_dial_digits() normal debug messages that do
not get output unless enabled.
* Reworded some debug messages in my_dial_digits() to be clearer.
* Replace strncpy() with ast_copy_string() in my_dial_digits() which does
the same job better.
(closes issue #18847)
Reported by: vmikhelson
Tested by: rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
also went ahead and fixed the problem it introduces before committing.
........
r313435 | jrose | 2011-04-12 13:44:44 -0500 (Tue, 12 Apr 2011) | 1 line
fixing stupid mistake with putting code before variable declaration
........
Merged revisions 313433 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r313432 | jrose | 2011-04-12 13:12:29 -0500 (Tue, 12 Apr 2011) | 14 lines
reload Chan_dahdi memory leak caused by variables
chan_dahdi reloading with variables set via setvar in chan_dahdi.conf would
stay in the dahdi_pvt structs for individual channels (causing them to just
continue adding the new ones to the list) and also there was a memory leak
causes by the conf objects. This patch resolves both of these by using
ast_variables_destroy during the loading process.
(closes issue #17450)
Reported by: nahuelgreco
Patches:
patch.diff uploaded by jrose (license 1225)
Tested by: tilghman, jrose
Review: https://reviewboard.asterisk.org/r/1170/
........
........
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r313190 | rmudgett | 2011-04-11 10:40:30 -0500 (Mon, 11 Apr 2011) | 39 lines
Merged revisions 313189 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r313189 | rmudgett | 2011-04-11 10:32:53 -0500 (Mon, 11 Apr 2011) | 32 lines
Merged revisions 313188 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r313188 | rmudgett | 2011-04-11 10:27:52 -0500 (Mon, 11 Apr 2011) | 25 lines
Stuck channel using FEATD_MF if caller hangs up at the right time.
The cause was actually a caller hanging up just at the end of the Feature
Group D DTMF tones that setup the call. The reason for this is a "guard
timer" that's implemented using ast_safe_sleep(100). If the caller
happens to hang up AFTER the final tone of the DTMF string but BEFORE the
end of that ast_safe_sleep(), then ast_safe_sleep() will return non-zero.
This causes the code to bounce to the end of ss_thread(), but it does NOT
tear down the call properly.
This should be a rare occurrence because the caller has to hang up at
EXACTLY the right time. Nonetheless, it was happening quite regularly on
the reporter's system. It's not easily reproducible, unless you purposely
increase the guard-time to 2000 or more. Once you do that, you can
reproduce it every time by watching the DTMF debug and hanging up just as
it ends.
Simply add an ast_hangup() before goto quit.
(closes issue #15671)
Reported by: jcromes
Patches:
issue15671.patch uploaded by pabelanger (license 224)
Tested by: jcromes
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313001 | alecdavis | 2011-04-07 22:19:31 +1200 (Thu, 07 Apr 2011) | 13 lines
Fix ISDN calling subaddr User Specified Odd/Even Flag
Calculation of the Odd/Even flag was wrong.
Implement correct algo, and set odd/even=0 if data would be truncated.
Only allow automatic calculation of the O/E flag, don't let dialplan influence.
(closes issue #19062)
Reported by: festr
Patches:
bug19062.diff2.txt uploaded by alecdavis (license 585)
Tested by: festr, alecdavis, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312949 | rmudgett | 2011-04-05 13:45:24 -0500 (Tue, 05 Apr 2011) | 6 lines
Crash if ISDN span layer 1 is down on initial load.
Regression from -r312575 B channel shifting during negotiation.
* Also combine updating the alarm flag with clearing the resetting flag.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312866 | rmudgett | 2011-04-05 10:38:14 -0500 (Tue, 05 Apr 2011) | 15 lines
Responding to OPTIONS packet with 404 because Asterisk not looking for "s" extension.
The get_destination() function was not using the "s" extension when the
request URI did not specify an extension. This is a regression caused
when the URI parsing code was extracted into parse_uri().
Made get_destination() substitute the "s" extension when the parsed URI
results in an empty string.
(closes issue #18348)
Reported by: shmaize
Patches:
issue18348_v1.8.patch uploaded by rmudgett (license 664)
Tested by: shmaize
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r312575 | rmudgett | 2011-04-04 11:10:50 -0500 (Mon, 04 Apr 2011) | 52 lines
Merged revisions 312574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312574 | rmudgett | 2011-04-04 11:00:02 -0500 (Mon, 04 Apr 2011) | 45 lines
Merged revisions 312573 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312573 | rmudgett | 2011-04-04 10:49:30 -0500 (Mon, 04 Apr 2011) | 38 lines
Issues with ISDN calls changing B channels during call negotiations.
The handling of the PROCEEDING message was not using the correct call
structure if the B channel was changed. (The same for PROGRESS.) The call
was also not hungup if the new B channel is not provisioned or is busy.
* Made all call connection messages (SETUP_ACKNOWLEDGE, PROCEEDING,
PROGRESS, ALERTING, CONNECT, CONNECT_ACKNOWLEDGE) ensure that they are
using the correct structure and B channel. If there is any problem with
the operations then the call is now hungup with an appropriate cause code.
* Made miscellaneous messages (INFORMATION, FACILITY, NOTIFY) find the
correct structure by looking for the call and not using the channel ID.
NOTIFY is an exception with versions of libpri before v1.4.11 because a
call pointer is not available for Asterisk to use.
* Made all hangup messages (DISCONNECT, RELEASE, RELEASE_COMPLETE) find
the correct structure by looking for the call and not using the channel
ID.
(closes issue #18313)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2620
(closes issue #18231)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2924
(closes issue #18488)
Reported by: jpokorny
JIRA SWP-2929
JIRA AST-437 (The issues fixed here are most likely causing this JIRA issue.)
JIRA DAHDI-406
JIRA LIBPRI-33 (Stuck resetting flag likely fixed)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312509 | rmudgett | 2011-04-01 18:15:42 -0500 (Fri, 01 Apr 2011) | 22 lines
When a call going out an NT-PTMP port gets rejected, Asterisk crashes.
If a call is sent to an ISDN phone that rejects the call with
RELEASE_COMPLETE(cause: call reject(21), or busy(17)) Asterisk crashes.
I could not get my setup to crash. However, I could see the possibility
from a race condition between queuing an AST_CONTROL_BUSY to the core and
then queueing an AST_CONTROL_HANGUP. If the AST_CONTROL_BUSY is processed
before the AST_CONTROL_HANGUP is queued, the ast_channel could be
destroyed out from under chan_misdn.
Avoid this particular crash scenario by not queueing the
AST_CONTROL_HANGUP if the AST_CONTROL_BUSY was queued.
(closes issue #18408)
Reported by: wimpy
Patches:
issue18408_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett, wimpy
JIRA SWP-2679
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312022 | rmudgett | 2011-03-31 15:11:40 -0500 (Thu, 31 Mar 2011) | 14 lines
chan_misdn segfaults when DEBUG_THREADS is enabled.
The segfault happens because jb->mutexjb is uninitialized from the
ast_malloc(). The internals of ast_mutex_init() were assuming a nonzero
value meant mutex tracking initialization had already happened. Recent
changes to mutex tracking code to reduce excessive memory consumption
exposed this uninitialized value.
Converted misdn_jb_init() to use ast_calloc() instead of ast_malloc().
Also eliminated redundant zero initialization code in the routine.
(closes issue #18975)
Reported by: irroot
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311612 | bbryant | 2011-03-23 17:45:46 -0400 (Wed, 23 Mar 2011) | 9 lines
Fix a possible crash in sip/reqresp_parser.c that is caused by a possible null
value.
(closes issue #18821)
Reported by: cmaj
Patches:
patch-reqresp_parser_sip_uri_domain_cmp_c_locale-crash-1.8.3-rc2.diff.tx
uploaded by cmaj (license 830)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311558 | twilson | 2011-03-22 19:24:53 -0700 (Tue, 22 Mar 2011) | 5 lines
Don't use static declared buf in parse_name_andor_addr
This function isn't used anywhere yet, but we definitely don't want
to keep the same value for buf between calls to the function.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311352 | jrose | 2011-03-18 11:19:05 -0500 (Fri, 18 Mar 2011) | 10 lines
Changes some print statements/events to use a blank string in place of NULL if the string in question is NULL.
This is supposed to improve Solaris compatibility since Solaris goes berserk when trying to output NULL strings.
(closes issue #18759)
Reported by: bklang
Patches:
null-strings.patch uploaded by bklang (license 919)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311297 | rmudgett | 2011-03-17 21:59:05 -0500 (Thu, 17 Mar 2011) | 12 lines
Race condition when ISDN CallRerouting/CallDeflection invoked.
The queued AST_CONTROL_BUSY could sometimes be processed before the
call_forward dial string is recognized.
* Moved setting the call_forwarding dial string after sending a response
to the initiator and just queue an empty frame to wake up the media thread
instead of an AST_CONTROL_BUSY.
* Added check for empty rerouting/deflection number and respond with an
error.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309808 | tilghman | 2011-03-06 18:54:42 -0600 (Sun, 06 Mar 2011) | 14 lines
Merged revisions 309251 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r309445 | rmudgett | 2011-03-04 09:22:04 -0600 (Fri, 04 Mar 2011) | 46 lines
Get real channel of a DAHDI call.
Starting with Asterisk v1.8, the DAHDI channel name format was changed for
ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
There were several reasons that the channel name had to change.
1) Call completion requires a device state for ISDN phones. The generic
device state uses the channel name.
2) Calls do not necessarily have B channels. Calls placed on hold by an
ISDN phone do not have B channels.
3) The B channel a call initially requests may not be the B channel the
call ultimately uses. Changes to the internal implementation of the
Asterisk master channel list caused deadlock problems for chan_dahdi if it
needed to change the channel name. Chan_dahdi no longer changes the
channel name.
4) DTMF attended transfers now work with ISDN phones because the channel
name is "dialable" like the chan_sip channel names.
For various reasons, some people need to know which B channel a DAHDI call
is using.
* Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and
CHANNEL(dahdi_type) so the dialplan can determine the B channel currently
in use by the channel. Use CHANNEL(no_media_path) to determine if the
channel even has a B channel.
* Added AMI event DAHDIChannel to associate a DAHDI channel with an
Asterisk channel so AMI applications can passively determine the B channel
currently in use. Calls with "no-media" as the DAHDIChannel do not have
an associated B channel. No-media calls are either on hold or
call-waiting.
(closes issue #17683)
Reported by: mrwho
Tested by: rmudgett
(closes issue #18603)
Reported by: arjankroon
Patches:
issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: stever28, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309256 | qwell | 2011-03-02 13:54:20 -0600 (Wed, 02 Mar 2011) | 15 lines
Merged revisions 309255 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309255 | qwell | 2011-03-02 13:53:47 -0600 (Wed, 02 Mar 2011) | 8 lines
Fix usage of "hasvoicemail=yes" and "mailbox=" in users.conf for SIP.
Since it's a duplicate, nothing is going to be done, so delme doesn't need to
be set at all. Strangely, when this was added, this was being set to 1 in 1.6,
and 0 in trunk.
(issue AST-439)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r308945 | alecdavis | 2011-02-26 07:52:53 +1300 (Sat, 26 Feb 2011) | 21 lines
Fix Deadlock with attended transfer of SIP call
Call path
sip_set_rtp_peer (locks chan then pvt)
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper (locks p->owner)
But by the time p->owner lock was attempted, seems as though chan and p->owner were different.
So in sip_set_rtp_peer, lock pvt first then lock p->owner using deadlocking methods.
(closes issue #18837)
Reported by: alecdavis
Patches:
bug18837-trunk.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, Irontec, ZX81, cmaj
Review: [https://reviewboard.asterisk.org/r/1126/]
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
List the current mapping of DAHDI B channels to Asterisk channel names and
which calls are on hold or call-waiting. Calls on hold or call-waiting
are not associated with any B channel.
JIRA LIBPRI-27
JIRA SWP-2547
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The nativeformats field was being overwritten when it should have been
appended too. This caused some format capabilities to be lost briefly and
some log warnings to be output.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306619 | twilson | 2011-02-07 14:15:27 -0800 (Mon, 07 Feb 2011) | 24 lines
Merged revisions 306618 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306618 | twilson | 2011-02-07 13:59:54 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306617 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306617 | twilson | 2011-02-07 13:51:43 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't allow a REFER w/replaces to replace its own dialog
Asterisk currently accepts a REFER with a Refer-To with an embedded Replaces
header that matches the dialog of the REFER. This would be a situation like A
calls B, A calls C, A transfers B to A, which is just silly. This patch makes
the transfer fail instead of making Asterisk freak out and forget to hang other
channels up.
Review: https://reviewboard.asterisk.org/r/1093/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306215 | jpeeler | 2011-02-03 17:49:28 -0600 (Thu, 03 Feb 2011) | 20 lines
Fix SIP deadlock involving state changes.
Once again a call to pbx_builtin_getvar_helper (and pbx_builtin_setvar_helper)
has caused locking problems. Both of these functions lock the channel when
the channel argument is passed in!
In this case, the suspected problem (the backtrace makes it impossible to tell)
was the private being locked in sip_set_rtp_peer and then:
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper
(Traced to verify that the fix was only required in 1.8 and later.)
(closes issue #18491)
Reported by: cmaj
Patches:
chan_sip_fix_deadlocks_bug_18491.txt uploaded by cmaj (license 830)
Tested by: cmaj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306127 | twilson | 2011-02-03 13:03:26 -0800 (Thu, 03 Feb 2011) | 23 lines
Merged revisions 306126 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306126 | twilson | 2011-02-03 12:56:00 -0800 (Thu, 03 Feb 2011) | 16 lines
Merged revisions 306119 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306119 | twilson | 2011-02-03 12:36:34 -0800 (Thu, 03 Feb 2011) | 9 lines
Set hangup cause in local_hangup
When a call involves a local channel (like SIP -> Local -> SIP), the hangup
cause was not being set. This resulted in SIP channels sometimes getting a
503 error instead of a 486 when the far side sent a busy. In Asterisk 1.8+
this also can cause issues with CCSS that involve a local channel. This patch
sets the hangupcause for one side of the local channel to the other in
local_hangup for outbound calls.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306128 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305923 | rmudgett | 2011-02-02 18:24:40 -0600 (Wed, 02 Feb 2011) | 24 lines
Merged revisions 305889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305343 | rmudgett | 2011-01-31 18:01:09 -0600 (Mon, 31 Jan 2011) | 21 lines
Merged revisions 305342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305342 | rmudgett | 2011-01-31 17:50:10 -0600 (Mon, 31 Jan 2011) | 14 lines
Merged revisions 305341 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305341 | rmudgett | 2011-01-31 17:45:58 -0600 (Mon, 31 Jan 2011) | 7 lines
Obtain the pri lock for PRI queue counters.
Need to obtain the pri lock when calling pri_dump_info_str() to avoid a
reentrancy problem when calculating the Q.921 Q count statistic.
JIRA AST-484
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305254 | qwell | 2011-01-31 17:07:00 -0600 (Mon, 31 Jan 2011) | 24 lines
Merged revisions 305253 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305253 | qwell | 2011-01-31 16:59:34 -0600 (Mon, 31 Jan 2011) | 17 lines
Merged revisions 305252 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305252 | qwell | 2011-01-31 16:56:54 -0600 (Mon, 31 Jan 2011) | 10 lines
Prevent a crash when dialing a technology with no destination (ex: Dial(SIP/))
chan_iax2 and other channel drivers already had code to prevent this. The
attempt that app_dial was making to prevent it was not correct, so I fixed that.
(closes issue #18371)
Reported by: gbour
Patches:
18371.patch uploaded by gbour (license 1162)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303962 | twilson | 2011-01-25 16:09:01 -0600 (Tue, 25 Jan 2011) | 30 lines
Merged revisions 303960 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303960 | twilson | 2011-01-25 16:02:42 -0600 (Tue, 25 Jan 2011) | 23 lines
Merged revisions 303906 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303906 | twilson | 2011-01-25 14:50:59 -0600 (Tue, 25 Jan 2011) | 16 lines
Guard against retransmitting BYEs indefinitely
In the case of an attended transfer (A calls B, A atxfers to C) where
A becomes unreachable before replying to Asterisk's BYE, Asterisk can
sometimes retransmit the BYE indefinitely. This is because
__sip_autodestruct tests p->refer && !ast_test_flag(&p->flags[0],
SIP_ALREADYGONE and will then transmit a BYE. When this BYE times out,
it will not ever be marked as ALREADYGONE, so when __sip_autodestruct
is called again, we end up starting the cycle over.
This patch adds a call to sip_alreadygone(pkt->owner) in retrans_pkt
in the case of a BYE that has timed out. This should prevent Asterisk
from trying to transmit new BYE messages in the future.
Review: https://reviewboard.asterisk.org/r/1077/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303771 | rmudgett | 2011-01-25 11:49:20 -0600 (Tue, 25 Jan 2011) | 54 lines
Merged revisions 303769 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303769 | rmudgett | 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) | 47 lines
Merged revisions 303765 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303765 | rmudgett | 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) | 40 lines
Sending out unnecessary PROCEEDING messages breaks overlap dialing.
Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing
through Asterisk. There is not enough information available at this point
to know if dialing is complete. The ast_exists_extension(),
ast_matchmore_extension(), and ast_canmatch_extension() calls are not
adequate to detect a dial through extension pattern of "_9!".
Workaround is to use the dialplan Proceeding() application early in
non-dial through extensions.
* Effectively revert issue #16789.
* Allow outgoing overlap dialing to hear dialtone and other early media.
A PROGRESS "inband-information is now available" message is now sent after
the SETUP_ACKNOWLEDGE message for non-digital calls. An
AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE
messages for non-digital calls.
* Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was
inconsistent with the cause codes.
* Added better protection from sending out of sequence messages by
combining several flags into a single enum value representing call
progress level.
* Added diagnostic messages for deferred overlap digits handling corner
cases.
(closes issue #17085)
Reported by: shawkris
(closes issue #18509)
Reported by: wimpy
Patches:
issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664)
Expanded upon issue18509_early_media_v1.8_v3.patch to include analog
and SS7 because of backporting requirements.
Tested by: wimpy, rmudgett
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r302412 | seanbright | 2011-01-19 10:31:39 -0500 (Wed, 19 Jan 2011) | 10 lines
Use appropriate type for requested format in chan_local.
We were passing and storing the requested format as an int instead of format_t
resulting in truncation.
(closes issue #18238)
Reported by: whizemen
Patches:
0018238_speex16.patch uploaded by whizemen (license 1143)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293493 | twilson | 2010-11-01 09:58:00 -0500 (Mon, 01 Nov 2010) | 14 lines
Only offer codecs both sides support for directmedia
When using directmedia, Asterisk needs to limit the codecs offered to just
the ones that both sides recognize, otherwise they may end up sending audio
that the other side doesn't understand.
(closes issue #17403)
Reported by: one47
Patches:
sip_codecs_simplified4 uploaded by one47 (license 23)
Tested by: one47, falves11
Review: https://reviewboard.asterisk.org/r/967/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r301946 | rmudgett | 2011-01-14 15:09:57 -0600 (Fri, 14 Jan 2011) | 13 lines
Deadlock between dahdi_request() and pri_dchannel() processing an incomming call.
The sig_pri_new_ast_channel() is called with the channel private lock held
when pri_dchannel() calls it and no channel private lock held when
dahdi_request() calls it. The use of pri_grab() in
sig_pri_new_ast_channel() could leave the channel private lock held when
it returns if the lock was not held before calling it.
Make sig_pri_new_ast_channel() just lock the PRI span lock instead of
using pri_grab(). It is safe to do this because dahdi_request() does not
have the channel private lock and the deadlock potential with the PRI span
lock is only between pri_dchannel() and other threads.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301947 65c4cc65-6c06-0410-ace0-fbb531ad65f3