Most of the changes here are trivial NULL checks. There are a couple
optimizations to remove the need to check for NULL and outboundproxy parsing
in chan_sip.c was rewritten to avoid use of strtok. Additionally, a bug was
found and fixed with the parsing of outboundproxy when "outboundproxy=," was
set.
(Closes issue ASTERISK-19654)
........
Merged revisions 365398 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365399 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add two new dialplan functions: FEATURE() and FEATUREMAP(). FEATURE()
lets you set some of the configuration options from the [general] section
of features.conf on a per-channel basis. FEATUREMAP() lets you customize
the key sequence used to activate built-in features, such as blindxfer,
and automon. See the built-in documentation for details.
Review: https://reviewboard.asterisk.org/r/1871/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When party B does an attended transfer of party A to party C, the
attending bridge between party B and C should not be running an h exten
when the bridge ends. Running an h exten now sets a softhangup flag to
ensure that an AGI will run in dead AGI mode.
* Set the AST_FLAG_BRIDGE_HANGUP_DONT on the party B channel for the
attending bridge between party B and C.
(closes issue AST-870)
(closes issue ASTERISK-19717)
Reported by: Mario
(closes issue ASTERISK-19633)
Reported by: Andrey Solovyev
Patches:
jira_asterisk_19633_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Andrey Solovyev, Mario
........
Merged revisions 364060 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364065 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) B calls A with Dial option T
2) B DTMF atxfer to C
3) B hangs up
4) C does not answer
5) B is called back
6) B answers
7) B cannot initiate transfers anymore
* Add dial features datastore to recalled party B channel that is a copy
of the original party B channel's dial features datastore.
* Extracted add_features_datastore() from add_features_datastores().
* Renamed struct ast_dial_features features_caller and features_callee
members to my_features and peer_features respectively. These better names
eliminate the need for some explanatory comments.
* Simplified code accessing the struct ast_dial_features datastore.
(closes issue ASTERISK-19383)
Reported by: lgfsantos
........
Merged revisions 363428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363429 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, a connected line update was queued during
call pickup and then an answer frame was queued. The original
caller would presumably then have his connected line updated
and then the call would be answered.
In actuality, the answer frame was not how the call ended up
being answered. Rather, an odd section in app_dial that checks
if the called channel's state is up.
The result is that the order of the connected line update and
the answer were variable. In most cases, this wasn't actually
a bad thing. However, if the 'I' option was passed to dial, the
connected line update would be inhibited.
The fix is to queued the connected line after the answer frame is
queued. This way the race in app_dial is between two
conditions resulting in an answer. This way the connected line
update occurs after the answer every time.
(closes issue ASTERISK-19183)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Mark Michelson
Patches:
ASTERISK-19183.patch uploaded by Mark Michelson (license 5049)
........
Merged revisions 360884 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360885 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360886 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix AMI module reload deadlock regression from ASTERISK-18479 when it
tried to fix the race between calling an AMI action callback and
unregistering that action. Refixes ASTERISK-13784 broken by
ASTERISK-17785 change.
Locking the ao2 object guaranteed that there were no active callbacks that
mattered when ast_manager_unregister() was called. Unfortunately, this
causes the deadlock situation. The patch stops locking the ao2 object to
allow multiple threads to invoke the callback re-entrantly. There is no
way to guarantee a module unload will not crash because of an active
callback. The code attempts to minimize the chance with the registered
flag and the maximum 5 second delay before ast_manager_unregister()
returns.
The trunk version of the patch changes the API to fix the race condition
correctly to prevent the module code from unloading from memory while an
action callback is active.
* Don't hold the lock while calling the AMI action callback.
(closes issue ASTERISK-19487)
Reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1818/
Review: https://reviewboard.asterisk.org/r/1820/
........
Merged revisions 359979 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359980 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Custom parking extensions may not be coded such that the first and only
extension priority is the Park application. These custom parking
extensions will not be recognized as parking extensions. When a call is
blind transferred to an extension that is not recognized as a parking
extension, the normal blind transfer code causes the transferred channel
to start executing dialplan. Calls that get parked in this manner do not
know the original channel name that parked the call so the original parker
could never be called back if the parked call is not retrieved before the
timeout time. The parking space is also announced to the call being
parked as a side effect of not knowing the original parking channel.
* Fix handling of BLINDTRANSFER channel variable for call parking.
* Fixed SIP blind transfer using the wrong dialplan context variable to
check for the parking extension.
(closes issue ASTERISK-19322)
Reported by: aragon
Tested by: rmudgett, jparker
Review: https://reviewboard.asterisk.org/r/1730/
JIRA AST-766
........
Merged revisions 356521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
None of the parameters to ast_bridge_call() can be NULL for the bridge to
work so no need to check for it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds two new options to SIP peers allowing them to specify features (dynamic or builtin)
to use when sending INFO/record requests. Recordonfeature activates whatever feature
is specified when recieving a record: on request while recordofffeature activates
whatever feature is specified when receiving a record: off request. Both of these
features can be disabled by setting the feature to an empty string.
(closes issue ASTERISK-16507)
Reported by: Jon Bright
Review: https://reviewboard.asterisk.org/r/1634/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add locking when a channel inherits variables and datastores in
__ast_request_and_dial() and ast_call_forward(). Note: The involved
channels are not active so there was minimal potential for problems.
* Remove calls to ast_set_callerid() in __ast_request_and_dial() and
ast_call_forward() because the set information is for the wrong direction.
* Don't use C++ keywords for variable names in ast_call_forward().
* Run the redirecting interception macro if defined when forwarding a call
in ast_call_forward(). Note: Currently will never execute because the
only callers that supply a calling channel supply a hungup or zombie
channel.
* Make feature_request_and_dial() put the transferee into autoservice when
it calls ast_call_forward() in case a redirection interception macro is
run. Note: Currently will never happen because the caller channel (Party
B) is always hungup at this time.
* Make feature_request_and_dial() ignore the AST_CONTROL_PROCEEDING frame
to silence a log message.
........
Merged revisions 348464 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 348465 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PARKEDCALL variable tracks which parking lot the call was last parked in. This can be
used afterwards for flow control when returntoorigin is set to off. I went ahead and
documented both this and the existing variable set during timeout (PARKINGSLOT) in
the sample features.conf since there was no prior mention of variables being set during
timeout.
(closes issue ASTERISK-16239)
Reported By: Clod Patry
Patches:
M17503.diff uploaded by Clod Patry (license 5138)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348161 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bridge is broken, ast_bridge_call() might execute the h exten on
the calling channel. However, that channel may not have been the channel
that broke the bridge by hanging up. The channel executing the h exten
must be in a hung up state so things like AGI run in the correct mode.
* Make sure ast_bridge_call() marks the channel it is executing the h
exten on as hung up. (The AST_SOFTHANGUP_APPUNLOAD flag is used so as to
match the pbx.c main dialplan execution loop when it executes the h
exten.)
(closes issue ASTERISK-18811)
Reported by: David Hajek
Patches:
jira_asterisk_18811_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: David Hajek, rmudgett
........
Merged revisions 347595 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347600 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for ASTERISK-12715 and ASTERISK-12685 added a check for the Park
application because the channel needed to be masqueraded to prevent a
crash. Since the Park application now always masquerades the channel into
the parking lot, the special check is no longer needed. The fix also
resulted in AGI exec Park attempting to double park the call and not honor
the Park application parameters.
* Removed no longer necessary call to ast_masq_park_call() by AGI exec for
the Park application. (Reverts -r146923)
* Fix Park application to only return 0 or -1. The AGI exec Park was
causing broken pipe error messages because the Park application returned 1
on successful park.
(closes issue ASTERISK-18737)
........
Merged revisions 341717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 341718 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix potential deadlocks in SIP and IAX blind transfer to parking.
* Fix SIP, IAX, DAHDI analog, and MGCP channel drivers to respect the
parkext_exclusive option with transfers (Park(,,,,,exclusive_lot)
parameter). Created ast_park_call_exten() and ast_masq_park_call_exten()
to maintian API compatibility.
* Made masq_park_call() handle a failed ast_channel_masquerade() setup.
* Reduced excessive struct parkeduser.peername[] size.
........
Merged revisions 341254 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 341255 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Party A calls Party B.
Party A DTMF blind transfers Party B to Party C.
Party A channel continues to execute dialplan.
* Fixed the return value of builtin_blindtransfer() to return the correct
value after a transfer so the dialplan will not keep executing.
* Removed unnecessary connected line update that did not really do
anything.
* Made access to GOTO_ON_BLINDXFR thread safe in check_goto_on_transfer().
* Fixed leak of xferchan for failure cases in check_goto_on_transfer().
* Updated debug messages in builtin_blindtransfer() and
check_goto_on_transfer().
(closes issue ASTERISK-18275)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 340809 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 340810 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334841 | rmudgett | 2011-09-07 14:33:38 -0500 (Wed, 07 Sep 2011) | 17 lines
Merged revisions 334840 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334840 | rmudgett | 2011-09-07 14:31:44 -0500 (Wed, 07 Sep 2011) | 10 lines
Fix AMI action Park crash.
* Made AMI action Park not say anything to the parker channel (AMI header
Channel2) since the AMI action is a third party parking the call. (This
is a change in behavior that cannot be preserved without a lot of effort.)
* Made not play pbx-parkingfailed if the Park 's' option is used.
JIRA AST-660
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332101 | rmudgett | 2011-08-16 12:17:28 -0500 (Tue, 16 Aug 2011) | 140 lines
Merged revisions 332100 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332100 | rmudgett | 2011-08-16 11:31:36 -0500 (Tue, 16 Aug 2011) | 133 lines
Fix multiple parking issues.
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331265 | rmudgett | 2011-08-09 18:12:49 -0500 (Tue, 09 Aug 2011) | 22 lines
Merged revisions 331248 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331248 | rmudgett | 2011-08-09 17:12:59 -0500 (Tue, 09 Aug 2011) | 15 lines
Misc minor items found in code.
* Add some reentrancy protection in pbx.c when creating the contexts_table
hash table.
* Fix inverted test in chan_sip.c conditional code.
* Fix uninitialized variable and use of the wrong variable in chan_iax2.c.
* Fix test of return value in app_parkandannounce.c. Explicitly testing
for -1 is bad if the function does not actually return that value when it
fails.
* Fixup some comments and add some curly braces in features.c.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r323754 | twilson | 2011-06-15 13:21:52 -0500 (Wed, 15 Jun 2011) | 23 lines
Merged revisions 323733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r323733 | twilson | 2011-06-15 13:13:00 -0500 (Wed, 15 Jun 2011) | 16 lines
Merged revisions 323732 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r323732 | twilson | 2011-06-15 13:06:24 -0500 (Wed, 15 Jun 2011) | 9 lines
Fix DYNAMIC_FEATURES
DYNAMIC_FEATURES were broken by a recent DTMF change. This patch makes
sure that dynamic features are also checked when deciding whether or not
to pass DTMF through or store it for interpreting.
(closes issue ASTERISK-17914)
Reported by: vrban
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322749 | rmudgett | 2011-06-09 11:31:53 -0500 (Thu, 09 Jun 2011) | 15 lines
Remove potential deadlock in call pickup race.
Deadlock is possible in ast_do_pickup() when holding the target channel
lock and trying to get the chan channel lock. Also, holding the target
lock when calling ast_channel_masquerade() is not a good idea because that
routine does deadlock avoidance.
* Removed the need to hold the target lock after marking the target with a
datastore and getting the connected line data off of the target channel.
* Moved can_pickup() to ast_can_pickup() in features.c. Now all the call
pickup methods use the same basic call pickup availability check.
Review: https://reviewboard.asterisk.org/r/1234/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321211 | alecdavis | 2011-05-27 20:31:15 +1200 (Fri, 27 May 2011) | 16 lines
Fix *8 directed pickup locks system during pickupsound play out
move playout from sip_pickup_thread to bridge using BRIDGE_PLAY_SOUND method,
This stop the clash of 2 threads trying to write audio to same channel.
In addition fixes choppy audio beep in issue 19177.
(issue #18654)
(issue #19177)
Reported by: Docent
Patches:
review1232-1.8.diff.txt alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1232/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320823 | rmudgett | 2011-05-25 12:06:38 -0500 (Wed, 25 May 2011) | 18 lines
The AMI Newstate event contains different information between v1.4 and v1.8.
The addition of connected line support in v1.8 changes the behavior of the
channel caller ID somewhat. The channel caller ID value no longer time
shares with the connected line ID on outgoing call legs. The timing of
some AMI events/responses output the connected line ID as caller ID.
These party ID's are now separate.
* The ConnectedLineNum and ConnectedLineName headers were added to many
AMI events/responses if the CallerIDNum/CallerIDName headers were also
present.
(closes issue #18252)
Reported by: gje
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1227/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320796 | rmudgett | 2011-05-25 11:23:11 -0500 (Wed, 25 May 2011) | 17 lines
Give zombies a safe channel driver to use.
Recent crashes from zombie channels suggests that they need a safe home to
goto. When a masquerade happens, the physical part of the zombie channel
is hungup. The hangup normally sets the channel private pointer to NULL.
If someone then blindly does a callback to the channel driver, a crash is
likely because the private pointer is NULL.
The masquerade now sets the channel technology of zombie channels to the
kill channel driver.
Related to the following issues:
(issue #19116)
(issue #19310)
Review: https://reviewboard.asterisk.org/r/1224/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320057 | rmudgett | 2011-05-20 11:43:02 -0500 (Fri, 20 May 2011) | 19 lines
Crash while transferring a call during DTMF feature timeout.
When a call is being attended transferred during the time between
AST_FRAME_DTMF_BEGIN and AST_FRAME_DTMF_END, the transferred channel
becomes a zombie (so tech data is not available), making ast_dtmf_stream()
segfault when it tries to send the DTMF digit (at least with SIP
channels).
Patch based on feature-end-zombie.patch uploaded by Irontec (license 1256)
* Check for zombies when ast_channel_bridge() returns.
* Guarantee that the fo parameter value is initialized in
ast_channel_bridge() before any returns.
(closes issue #19116)
Reported by: Irontec
Tested by: rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319997 | rmudgett | 2011-05-20 10:48:25 -0500 (Fri, 20 May 2011) | 25 lines
Crash when using directed pickup applications.
The directed pickup applications can cause a crash if the pickup was
successful because the dialplan keeps executing.
This patch does the following:
* Completes the channel masquerade on a successful pickup before the
application returns. The channel is now guaranteed a zombie and must not
continue executing the dialplan.
* Changes the return value of the directed pickup applications to return
zero if the pickup failed and nonzero(-1) if the pickup succeeded.
* Made some code optimizations that no longer require re-checking the
pickup channel to see if it is still available to pickup.
(closes issue #19310)
Reported by: remiq
Patches:
issue19310_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, remiq, rmudgett
Review: https://reviewboard.asterisk.org/r/1221/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318868 | rmudgett | 2011-05-13 11:28:26 -0500 (Fri, 13 May 2011) | 19 lines
CDR's are being written immediately on caller hangup.
CDR's are being written immediately on caller hangup. The dialplan is not
able to modify it in the h exten. The h exten in the initial context is
not run before closing CDR's when the bridge is unlinked if a macro is
active and does not have an h exten.
* Make ast_bridge_call() check for an h exten in the current context and
if a macro is active then the initial context. The first h exten found is
then run before closing the CDR.
(closes issue #18212)
Reported by: leearcher
Patches:
issue18212_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1206/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318671 | alecdavis | 2011-05-13 10:52:08 +1200 (Fri, 13 May 2011) | 30 lines
Fix directed group pickup feature code *8 with pickupsounds enabled
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318282 | rmudgett | 2011-05-09 14:07:01 -0500 (Mon, 09 May 2011) | 24 lines
Hangup extension executed twice.
When a user hangs up a call, in certain circumstances, the hangup
extension can end up being executed twice:
1) If a call is bridged and the 'h' extension executes the Hangup
application, then the 'h' extension will be executed twice.
2) If a call is bridged within a macro (Dial or Queue), it has its own 'h'
extension, the main context also has an 'h' extension, and the macro 'h'
extension executes the Hangup application, then both 'h' extensions will
be executed.
* Revert originally commited fix for #16106 and just set
AST_FLAG_BRIDGE_HANGUP_RUN unconditionally in ast_bridge_call(). The
bridge code just executed an 'h' extension so the main PBX loop does not
need to execute one as well.
(issue #16106)
Reported by: ajohnson
(issue #16548)
Reported by: hajekd
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318283 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315644 | twilson | 2011-04-26 14:39:01 -0700 (Tue, 26 Apr 2011) | 32 lines
Merged revisions 315643 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315643 | twilson | 2011-04-26 14:27:44 -0700 (Tue, 26 Apr 2011) | 25 lines
Merged revisions 315596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315596 | twilson | 2011-04-26 14:16:10 -0700 (Tue, 26 Apr 2011) | 18 lines
Allow transfer loops without allowing forwarding loops
We try to avoid the situation where two phones may be forwarded to each other
causing an infinite loop by storing each dialed interface in a channel
datastore and checking the list before dialing out. This works, but currently
breaks situations like A calls B, A transfers B to C, B transfers C to A, and A
transfers C to B. Since human interaction is happening here and not an
automated forwarding loop, it should be allowed.
This patch removes the dialed_interfaces datastore when a call is bridged (a
suggestion from the brilliant mmichelson). If a call is being bridged, it
should be safe to assume that we aren't stuck in a loop.
Since we are now handling this is the bridge code, the previous attempts at
handling it in app_dial and app_queue are removed.
Review: https://reviewboard.asterisk.org/r/1195/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r310902 | twilson | 2011-03-16 12:19:57 -0500 (Wed, 16 Mar 2011) | 43 lines
Merged revisions 310889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310889 | twilson | 2011-03-16 12:03:27 -0500 (Wed, 16 Mar 2011) | 36 lines
Merged revisions 310888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310888 | twilson | 2011-03-16 11:58:42 -0500 (Wed, 16 Mar 2011) | 29 lines
Don't delay DTMF in core bridge while listening for DTMF features
This patch is mostly the work of Olle Johansson. I did some cleanup and
added the silence generating code if transmit_silence is set.
When a channel listens for DTMF in the core bridge, the outbound DTMF is not
sent until we have received DTMF_END. For a long DTMF, this is a disaster. We
send 4 seconds of DTMF to Asterisk, which sends no audio for those 4 seconds.
Some products see this delay and the time skew on RTP packets that results and
start ignoring the audio that is sent afterward.
With this change, the DTMF_BEGIN frame is inspected and checked. If it matches
a feature code, we wait for DTMF_END and activate the feature as before. If
transmit_silence=yes in asterisk.conf, silence is sent if we paritally match a
multi-digit feature. If it doesn't match a feature, the frame is forwarded
along with the DTMF_END without delay. By doing it this way, DTMF is not delayed.
(closes issue #15642)
Reported by: jasonshugart
Patches:
issue_15652_dtmf_ast-1.4.patch.txt uploaded by twilson (license 396)
Tested by: globalnetinc, jde
(closes issue #16625)
Reported by: sharvanek
Review: https://reviewboard.asterisk.org/r/1092/
Review: https://reviewboard.asterisk.org/r/1125/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306674 | twilson | 2011-02-07 14:43:22 -0800 (Mon, 07 Feb 2011) | 24 lines
Merged revisions 306673 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306673 | twilson | 2011-02-07 14:40:20 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306672 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306672 | twilson | 2011-02-07 14:35:20 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't try to pickup a call in the middle of a masquerade
If A calls B which doesn't answer and C & D both try to do a call pickup, it is
possible for ast_pickup_call to answer the call, then fail to masquerade one of
the calls because the other one is already in the process of masquerading. This
patch checks to see if the channel is in the process of masquerading before
call before selecting it for a pickup.
Review: https://reviewboard.asterisk.org/r/1094/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306124 | jpeeler | 2011-02-03 14:50:48 -0600 (Thu, 03 Feb 2011) | 17 lines
Merged revisions 306123 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r306123 | jpeeler | 2011-02-03 14:49:48 -0600 (Thu, 03 Feb 2011) | 10 lines
Set exception on channel in parking thread when POLLPRI event detected.
This is done just to make the code be equivalent to the old select code. As
noted in 303106 the same issue was already fixed in this branch, but the
exception was not set on the channel in the case of POLLPRI. The reason that
this did not cause a problem here is because in 122923 the check in __ast_read
to check the exception flag was removed.
(related to #18637)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304007 | rmudgett | 2011-01-25 17:28:25 -0600 (Tue, 25 Jan 2011) | 22 lines
Merged revisions 304006 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r304006 | rmudgett | 2011-01-25 17:25:32 -0600 (Tue, 25 Jan 2011) | 15 lines
Merged revisions 304005 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r304005 | rmudgett | 2011-01-25 17:21:09 -0600 (Tue, 25 Jan 2011) | 8 lines
DTMF attended transfers sometimes fail for no apparent reason.
The loop in feature_request_and_dial() can exit when Party C has answered
without processing an AST_CONTROL_ANSWER. Also sometimes an
AST_CONTROL_ANSWER never happens even though Party C has answered.
Don't hangup Party C if he is up or we receive an AST_CONTROL_ANSWER.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303549 | russell | 2011-01-24 14:51:37 -0600 (Mon, 24 Jan 2011) | 45 lines
Merged revisions 303548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303548 | russell | 2011-01-24 14:49:53 -0600 (Mon, 24 Jan 2011) | 38 lines
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines
Fix channel redirect out of MeetMe() and other issues with channel softhangup.
Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped
working properly. This issue includes a patch that resolves the issue by
removing a call to ast_check_hangup() from app_meetme.c. I left that in my
patch, as it doesn't need to be there. However, the rest of the patch fixes
this problem with or without the change to app_meetme.
The key difference between what happens before and after this patch is the
effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(),
ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme
sees this which causes it to exit as intended. Checking ast_check_hangup()
caused app_meetme to exit earlier in the process, and the target of the
redirect saw the condition where ast_read() returned NULL.
Removing ast_check_hangup() works around the issue in app_meetme, but doesn't
solve the issue if another application did the same thing. There are also
other edge cases where if an application finishes at the same time that a
redirect happens, the target of the redirect will think that the channel hung
up. So, I made some changes in pbx.c to resolve it at a deeper level. There
are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to
abort the hangup process. My patch extends this to remove the END_OF_Q frame
from the channel's read queue, making the "abort hangup" more complete. This
same technique was used in every place where a softhangup flag was cleared.
(closes issue #18585)
Reported by: oej
Tested by: oej, wedhorn, russell
Review: https://reviewboard.asterisk.org/r/1082/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303107 | sruffell | 2011-01-20 13:57:31 -0600 (Thu, 20 Jan 2011) | 23 lines
Merged revisions 303106 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r303106 | sruffell | 2011-01-20 13:56:34 -0600 (Thu, 20 Jan 2011) | 15 lines
main/features: Use POLLPRI when waiting for events on parked channels.
This change resolves a regression in the 1.6.2 when converting from
select to poll. The DAHDI timers use POLLPRI to indicate that the timer
fired, but features was not waiting for that flag. The result was no
audio for MOH when a call was parked and res_timing_dahdi was in use.
This patch is slightly modified from the one on the mantis issue. It does
not set an exception on the channel if the POLLPRI flag is set.
(closes issue #18262)
Reported by: francesco_r
Patches:
patch_park_moh-trunk-2.txt uploaded by cjacobsen (license 1029)
Tested by: francesco_r, rfrantik, one47
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302713 | rmudgett | 2011-01-19 15:29:22 -0600 (Wed, 19 Jan 2011) | 29 lines
Merged revisions 302693 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302693 | rmudgett | 2011-01-19 15:25:41 -0600 (Wed, 19 Jan 2011) | 22 lines
Merged revisions 302671 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302671 | rmudgett | 2011-01-19 15:21:56 -0600 (Wed, 19 Jan 2011) | 15 lines
DTMF transfer plays the wrong sounds for wrong number or other call failure.
* Set the default for features.conf.sample xferfailsound option to "beeperr"
as documented instead of "pbx-invalid" and corrected the use of it in DTMF
blind transfer (#1).
* Improved DTMF blind transfer handling of wrong numbers.
Most of the concerns in this issue were taken care of by the patch for
issue 17999: Issues with DTMF triggered attended transfers.
(closes issue #18379)
Reported by: gincantalupo
Tested by: rmudgett
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302174 | rmudgett | 2011-01-18 12:11:43 -0600 (Tue, 18 Jan 2011) | 102 lines
Merged revisions 302173 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302173 | rmudgett | 2011-01-18 12:07:15 -0600 (Tue, 18 Jan 2011) | 95 lines
Merged revisions 302172 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302172 | rmudgett | 2011-01-18 12:04:36 -0600 (Tue, 18 Jan 2011) | 88 lines
Issues with DTMF triggered attended transfers.
Issue #17999
1) A calls B. B answers.
2) B using DTMF dial *2 (code in features.conf for attended transfer).
3) A hears MOH. B dial number C
4) C ringing. A hears MOH.
5) B hangup. A still hears MOH. C ringing.
6) A hangup. C still ringing until "atxfernoanswertimeout" expires.
For v1.4 C will ring forever until C answers the dead line. (Issue #17096)
Problem: When A and B hangup, C is still ringing.
Issue #18395
SIP call limit of B is 1
1. A call B, B answered
2. B *2(atxfer) call C
3. B hangup, C ringing
4. Timeout waiting for C to answer
5. Recall to B fails because B has reached its call limit.
Because B reached its call limit, it cannot do anything until the transfer
it started completes.
Issue #17273
Same scenario as issue 18395 but party B is an FXS port. Party B cannot
do anything until the transfer it started completes. If B goes back off
hook before C answers, B hears ringback instead of the expected dialtone.
**********
Note for the issue #17273 and #18395 fix:
DTMF attended transfer works within the channel bridge. Unfortunately,
when either party A or B in the channel bridge hangs up, that channel is
not completely hung up until the transfer completes. This is a real
problem depending upon the channel technology involved.
For chan_dahdi, the channel is crippled until the hangup is complete.
Either the channel is not useable (analog) or the protocol disconnect
messages are held up (PRI/BRI/SS7) and the media is not released.
For chan_sip, a call limit of one is going to block that endpoint from any
further calls until the hangup is complete.
For party A this is a minor problem. The party A channel will only be in
this condition while party B is dialing and when party B and C are
conferring. The conversation between party B and C is expected to be a
short one. Party B is either asking a question of party C or announcing
party A. Also party A does not have much incentive to hangup at this
point.
For party B this can be a major problem during a blonde transfer. (A
blonde transfer is our term for an attended transfer that is converted
into a blind transfer. :)) Party B could be the operator. When party B
hangs up, he assumes that he is out of the original call entirely. The
party B channel will be in this condition while party C is ringing, while
attempting to recall party B, and while waiting between call attempts.
WARNING:
The ATXFER_NULL_TECH conditional is a hack to fix the problem. It will
replace the party B channel technology with a NULL channel driver to
complete hanging up the party B channel technology. The consequences of
this code is that the 'h' extension will not be able to access any channel
technology specific information like SIP statistics for the call.
ATXFER_NULL_TECH is not defined by default.
**********
(closes issue #17999)
Reported by: iskatel
Tested by: rmudgett
JIRA SWP-2246
(closes issue #17096)
Reported by: gelo
Tested by: rmudgett
JIRA SWP-1192
(closes issue #18395)
Reported by: shihchuan
Tested by: rmudgett
(closes issue #17273)
Reported by: grecco
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1047/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302178 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289340 | qwell | 2010-09-29 16:12:43 -0500 (Wed, 29 Sep 2010) | 22 lines
Merged revisions 289339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289339 | qwell | 2010-09-29 16:03:47 -0500 (Wed, 29 Sep 2010) | 15 lines
Merged revisions 289338 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289338 | qwell | 2010-09-29 15:56:26 -0500 (Wed, 29 Sep 2010) | 8 lines
Allow a manager originate to succeed on forwarded devices.
The timeout to wait for an answer was being set to 0 when a device forwarded to another
extension. We don't always need the timeout set like this, so make it an optional
parameter, and don't use it in this case.
ABE-2544
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289354 65c4cc65-6c06-0410-ace0-fbb531ad65f3