https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61781 | russell | 2007-04-24 14:00:06 -0500 (Tue, 24 Apr 2007) | 6 lines
Improve DTMF handling in ast_read() even more in response to a discussion on
the asterisk-dev mailing list. I changed the enforced minimum length of a
digit from 100ms to 80ms. Furthermore, I made it now enforce a gap of 45ms in
between digits. These values are not configurable in a configuration file
right now, but they can be easily changed near the top of main/channel.c.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61782 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61774 | russell | 2007-04-24 11:16:41 -0500 (Tue, 24 Apr 2007) | 5 lines
Add a few more state changes in handle_frame_ownerless() so that the SLA code
will get notified of these changes even when an owner channel is not provided.
This isn't from a specific bug report, it's just something I noticed while
poking around.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61765 | russell | 2007-04-23 13:17:00 -0500 (Mon, 23 Apr 2007) | 5 lines
Some dialplan functions, such as CUT(), expect to operate on variables on a
channel. So, this little hack lets them work in places where a channel doesn't
exist, such as within DUNDi configuration.
(issue #9465, reported and patched by Corydon76, testing by blitzrage)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61707 | qwell | 2007-04-20 16:35:27 -0500 (Fri, 20 Apr 2007) | 8 lines
Avoid invalid seqno cycling detection.
Per comment from Dave Troy:
This adds back in some simple typecasting I had in an earlier version
which I realize now may be breaking things.
Issue #9554.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I started this for use with SLA but ended up deciding not to use it. However,
there is no reason not to put this part in, anyway.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r60850 | tilghman | 2007-04-08 22:01:12 -0500 (Sun, 08 Apr 2007) | 10 lines
Merged revisions 60849 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r60849 | tilghman | 2007-04-08 21:49:06 -0500 (Sun, 08 Apr 2007) | 2 lines
Don't check for error when lowering priority (according to the manpage, it should never happen anyway). It might could happen, though, if another thread messed with the priority, so safeguard against that (reported via -dev list).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r60137 | russell | 2007-04-04 12:40:10 -0500 (Wed, 04 Apr 2007) | 14 lines
Merged revisions 60134 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r60134 | russell | 2007-04-04 12:38:47 -0500 (Wed, 04 Apr 2007) | 6 lines
It is valid to redirect channels via the manager interface that are not in the
UP state. Instead of checking for that to prevent to ensure a dead channel
doesn't get redirected, just use the ast_check_hangup() API call.
(issue #9457, reported by Callmewind, patch by me)
(related to issue #8977)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60141 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59887 | russell | 2007-04-03 13:01:49 -0500 (Tue, 03 Apr 2007) | 13 lines
Merged revisions 59886 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59886 | russell | 2007-04-03 12:58:19 -0500 (Tue, 03 Apr 2007) | 5 lines
When doing a built-in blind or attended transfer, restore the ability to use '#'
to terminate the number and immediately do the transfer instead of having to
dial the number and just wait for the feature digit timeout.
(issue #8366, xueliangliang)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59654 | russell | 2007-04-02 10:39:07 -0500 (Mon, 02 Apr 2007) | 14 lines
Merged revisions 59608 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59608 | russell | 2007-04-01 17:35:25 -0500 (Sun, 01 Apr 2007) | 6 lines
Add the SO_REUSEADDR flag to sockets handled by netsock. This is needed by
the patch that went in for issue 7874. chan_iax2 needs to be able to create
socket that is lisetning on INADDR_ANY, but also be able to bind sockets to
specific addresses. (Thanks to Stevenson on the asterisk-dev mailing list
for explaining why this flag was needed.)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59358 | russell | 2007-03-29 12:17:41 -0500 (Thu, 29 Mar 2007) | 13 lines
Merged revisions 59357 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59357 | russell | 2007-03-29 12:14:33 -0500 (Thu, 29 Mar 2007) | 5 lines
If an error occurs when reading from an RTP socket, and the error code does not
indicate that we should try again, then return NULL instead of a "null frame".
This will prevent Asterisk from trying over and over again, and eventually
causing the system to crash. (issue #8285, john)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r59207 | russell | 2007-03-26 12:45:55 -0500 (Mon, 26 Mar 2007) | 7 lines
The AUDIORTPQOS and VIDEORTPQOS variables are not fully functional in some
because they get set in sip_hangup. So, there are common situations where
the variables will not be available in the dialplan at all. So, this patch
provides an alternate method for getting to this information by introducing
AUDIORTPQOS and VIDEORTPQOS dialplan functions.
(issue #9370, patch by Corydon76, with some testing by blitzrage)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58931 | russell | 2007-03-15 17:25:12 -0500 (Thu, 15 Mar 2007) | 13 lines
Merge changes from svn/asterisk/team/russell/LaTeX_docs.
* Convert most of the doc directory into a single LaTeX formatted document
so that we can generate a PDF, HTML, or other formats from this
information.
* Add a CLI command to dump the application documentation into LaTeX format
which will only be include if the configure script is run with
--enable-dev-mode.
* The PDF turned out to be close to 1 MB, so it is not included. However, you
can simply run "make asterisk.pdf" to generate it yourself. We may include
it in release tarballs or have automatically generated ones on the web site,
but that has yet to be decided.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for Mark Spencers upcoming 30th birthday.
To enable, run `make menuselect` and select the option MARKO_BDAY under Compiler Flags.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r56505 | russell | 2007-02-23 17:24:18 -0600 (Fri, 23 Feb 2007) | 16 lines
Merged revisions 56504 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r56504 | russell | 2007-02-23 17:20:55 -0600 (Fri, 23 Feb 2007) | 8 lines
Fix up a couple more signal handlers to not do bad things that could cause
various undesirable results. The other day, I made Asterisk deadlock by
hitting Control-C because of a bad signal handler. Now, signal handlers
just set a flag and write to an alert pipe for the flag to be handled. Then,
there is another thread that is monitoring for these flags. If being run in
console mode, it is just the main thread. If Asterisk is in the background,
a thread is created to do it.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r56457 | file | 2007-02-23 16:53:41 -0500 (Fri, 23 Feb 2007) | 2 lines
Change log notice to debug. It is possible for a scheduled item to execute and be deleted at close to the same time and unavoidable. If this happens this message creeps up.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
performance of the GUI. This encodes the configuration into the JSON format
in a manager header, "JSON: ". The encoded information can be directly used
as a javascript object, so no parsing is needed. For large configuration
files, this can greatly improve loading times in the GUI. Furthermore, the
encoding takes up a lot less space when being transmitted than the other
alternatives. (Inspired by discussion with Pari)
Here is an example of what you get:
http://localhost:8088/asterisk/rawman?action=getconfigjson&filename=users.conf
Response: Success
JSON: {"general":["hasvoicemail=yes"],"6000":["fullname=russell","secret=1234"]}
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r56277 | russell | 2007-02-22 17:08:36 -0600 (Thu, 22 Feb 2007) | 18 lines
Merge changes from team/russell/sla_updates.
This batch of changes to the SLA code does a few different things.
* I made the SLA code event driven instead of having to act in a lot of busy
loops while dialing things to wait for state changes. This makes the code
more efficient and readable at the same time.
* I have implemented a couple of new features. The first is inbound trunk
ringing timeouts. This is an option that defines how long to let an incoming
call on a trunk to ring.
* I have also implemented ring timeouts for stations. They may be specified
for the entire station, meaning it is how long to let the station ring before
giving up. You can also specify a ring timeout for a specific trunk on a
station. So, you can say that you only want a specific station to ring 5
seconds if it is line1 ringing, but otherwise, there is no timeout.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
convert various #if expressions to #ifdef for macros that may not be defined (and where the value is not important)
Note: two of these changes are in bison generated files which is going to be inconvenient when they are regenerated
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@55329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
T.140/RFC 2793 is a live communication channel, originally
created for IP based text phones for hearing impaired.
Feels very much like the old Unix talk application.
This code is developed and disclaimed by John Martin of Aupix, UK.
Tested for interoperability by myself and Omnitor in Sweden,
the company that wrote most of the specifications.
A big thank you to everyone involved in this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pretty cool things.
First, you can get the device state of anything in the dialplan:
NoOp(SIP/mypeer has state ${DEVSTATE(SIP/mypeer)})
NoOp(The conference room 1234 has state ${DEVSTATE(MeetMe:1234)})
Most importantly, this allows you to create custom device states so you can
control phone lamps directly from the dialplan.
Set(DEVSTATE(Custom:mycustomlamp)=BUSY)
...
exten => mycustomlamp,hint,Custom:mycustomlamp
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r54066 | russell | 2007-02-12 11:58:43 -0600 (Mon, 12 Feb 2007) | 4 lines
- Add the ability to register a callback to monitor state changes in an
asynchronous dial operation.
- Rename the various references to "status" to "state" in the dial API
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53810 | russell | 2007-02-09 18:35:09 -0600 (Fri, 09 Feb 2007) | 24 lines
Merge team/russell/sla_rewrite
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53497 | russell | 2007-02-07 17:52:45 -0600 (Wed, 07 Feb 2007) | 6 lines
When building libdb1.a, put the additional flags needed at the beginning of
ASTCFLAGS, instead of at the end. This way, we ensure that we find the local
headers first before accidentally trying to use headers that exist in
locations specified in the ASTCFLAGS passed from the main Makefile.
(issue #8637, ovi)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53464 | russell | 2007-02-07 14:07:39 -0600 (Wed, 07 Feb 2007) | 4 lines
The clean target actually needs to run "distclean" on editline. This is
because we need to make sure that its configure script gets executed again,
because the CFLAGS we want to pass to editline may have changed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53429 | russell | 2007-02-07 11:39:31 -0600 (Wed, 07 Feb 2007) | 7 lines
When parsing the NTP timestamp in a sender report message, you are supposed to
take the low 16 bits of the integer part, and the high 16 bits of the
fractional part. However, the code here was erroneously taking the low 16 bits
of the fractional part. It then shifted the result 16 bits down, so the result
was always zero. This fix makes it grab the appropriate high 16 bits, instead.
(issue #8991, pointed out by andre_abrantes)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53052 | file | 2007-01-31 18:24:20 -0600 (Wed, 31 Jan 2007) | 2 lines
When going on hold have the side that was put on hold reinvite back to Asterisk. When going off hold have the side that was taken off hold reinvited back to the other party.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r52904 | russell | 2007-01-30 11:19:39 -0600 (Tue, 30 Jan 2007) | 17 lines
Merged revisions 52903 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r52903 | russell | 2007-01-30 11:12:04 -0600 (Tue, 30 Jan 2007) | 9 lines
The SIGHUP handler was implemented to allow admins to send SIGHUP to a running
Asterisk process to reload the configuration. However, doing the actual reload
in the signal handler itself is a very bad thing to do, because the reload
process includes calling non-reentrant functions such as malloc/calloc/etc.
If Asterisk is running in the background, then the reload will happen
immediately. However, if running in console mode, the reload doesn't work
until something is typed at the console. That sort of defeats the purpose,
but I don't see an easy way to get around it at this point.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52645 | russell | 2007-01-29 15:26:27 -0600 (Mon, 29 Jan 2007) | 6 lines
Fix a problem with packet-to-packet bridging and DTMF mode translation. P2P
bridging can only be used when the DTMF modes don't match if the core is
monitoring DTMF in both directions. Then, the core will handle the translation.
Otherwise, this bridging method can not be used.
(issue #8936)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- changing the actionlock to a rwlock
- not locking the session before doing the action callback
The crash issue in 8711 should not be an issue here.
Merged revisions 52611 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52611 | russell | 2007-01-29 14:39:20 -0600 (Mon, 29 Jan 2007) | 10 lines
The session lock can not be held while calling action callbacks. If so, then
when the WaitEvent callback gets called, then no event can happen because the
session can't be locked by another thread. Also, the session needs to be
locked in the HTTP callback when it reads out the output string. This fixes
the deadlock reported in both 8711 and 8934.
Regarding issue 8711, there still may be an issue. If there is a second action
requested before the processing of the first action is finished, there could
still be some corruption of the output string buffer used to build the result.
(issue #8711, #8934)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52494 | jdixon | 2007-01-28 22:18:36 -0600 (Sun, 28 Jan 2007) | 4 lines
Fixed problem with jitterbuf, whereas it would not complain about, and
would allow itself to be overfilled (per the max_jitterbuf parameter). Now
it rejects any data over and above that size, and complains about it.
........
r52506 | russell | 2007-01-29 10:54:27 -0600 (Mon, 29 Jan 2007) | 5 lines
Clean up a few things in the last commit to the adaptive jitterbuffer code.
- Specifically indicate to the compiler that the "dropem" variable only
needs one but.
- Change formatting to conform to coding guidelines.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r51848 | russell | 2007-01-23 18:59:58 -0600 (Tue, 23 Jan 2007) | 14 lines
Merged revisions 51843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r51843 | russell | 2007-01-23 18:57:28 -0600 (Tue, 23 Jan 2007) | 6 lines
Fix an issue related to synchronization of recordings when using Monitor().
The bug is a miscalculation of the amount to seek the stream for writing to
disk when the number of samples coming in and out of a channel do not match up.
(issue #8298, #8887, report and patch by guillecabeza, patch files created and
testing done by whoiswes)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51781 | russell | 2007-01-23 16:04:01 -0600 (Tue, 23 Jan 2007) | 6 lines
Fix some bugs in process_message(). The manager session lock needs to be held
when sending some sort of response, or calling one of the manager action
callbacks. This resolves an issue where people using the GUI would get random
crashes when they start clicking around a lot.
(issue #8711, reported and debugged by zandbelt)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51750 | russell | 2007-01-23 15:33:15 -0600 (Tue, 23 Jan 2007) | 4 lines
When traversing the list of manager actions, the iterator needs to be
initialized to the list head *after* locking the list. Also, lock the actions
list in one place it is being accessed where it was not being done.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51683 | murf | 2007-01-23 11:58:27 -0700 (Tue, 23 Jan 2007) | 1 line
via 8748 (callerid.c loses name when returning PRIVATE_NUMBER flag), the user suggested this mod, saying it would allow 'WITHHELD' to appear in the name field, which would be useful
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
has been found so that 'cat' is non-NULL. This way, users.conf is only checked
when necessary. (issue #8852, akohlsmith, committed patch a bit different)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51262 | russell | 2007-01-18 15:54:23 -0600 (Thu, 18 Jan 2007) | 5 lines
Ensure that the locations given to the Asterisk configure script for ncurses,
curses, termcap, or tinfo are further passed along to the editline configure
script. This fixes some cross-compilation environments.
(issue #8637, reported by ovi, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r51195 | tilghman | 2007-01-17 14:56:15 -0600 (Wed, 17 Jan 2007) | 12 lines
Merged revisions 51194 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r51194 | tilghman | 2007-01-17 14:52:21 -0600 (Wed, 17 Jan 2007) | 4 lines
When ast_strip_quoted was called with a zero-length string, it would treat a
NULL as if it were the quoting character (and would thus return the string
in memory immediately following the passed-in string).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50867 | kpfleming | 2007-01-15 09:03:06 -0600 (Mon, 15 Jan 2007) | 2 lines
use the ACX_PTHREAD macro from the Autoconf macro archive for setting up compiler pthreads support... should improve portability to platforms with unusual pthreads requirements
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50466 | file | 2007-01-11 00:19:39 -0500 (Thu, 11 Jan 2007) | 2 lines
Add support to see whether NAT was detected (yay symmetric RTP) and also add a check in chan_sip so that if NAT has been detected and the reinvite behind nat option has been turned off, then just do partial bridge. (issue #8655 reported by mnicholson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
previously set are erroneously still set (Bug 6701). After discussion,
it was determined this should only be changed in trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49742 | qwell | 2007-01-05 18:24:38 -0600 (Fri, 05 Jan 2007) | 7 lines
Save 1 whopping byte of allocated memory!
This looks like it may have been a chicken/egg scenario..
You had to call a cleanup func, because everything was allocated.
Then since you had to call a cleanup func, you were forced to allocate - ie; strdup("").
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49457 | kpfleming | 2007-01-04 12:05:47 -0600 (Thu, 04 Jan 2007) | 2 lines
make building of codec_gsm against the system GSM library actually work
........
r49460 | kpfleming | 2007-01-04 12:16:40 -0600 (Thu, 04 Jan 2007) | 2 lines
don't define this type either if LOW_MEMORY is enabled
........
r49461 | kpfleming | 2007-01-04 12:17:01 -0600 (Thu, 04 Jan 2007) | 2 lines
don't do frame header caching in the core if LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49066 | file | 2006-12-30 00:46:57 -0500 (Sat, 30 Dec 2006) | 2 lines
If the Packet2Packet bridge is being broken because of a masquerade then attempt to read a frame in so the masquerade actually happens. Otherwise weirdness will occur. (issue #8696 reported by kjotte)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49009 | file | 2006-12-27 17:28:46 -0500 (Wed, 27 Dec 2006) | 2 lines
ast_copy_string is not available when LOW_MEMORY is used and things are being built in the utils directory, so we need to resort to the old method of strncpy. (issue #8579 reported by mottano)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48998 | kpfleming | 2006-12-27 15:08:30 -0600 (Wed, 27 Dec 2006) | 3 lines
move extern declaration for this option to a header file where it belongs
provide an initial value for 'languageprefix' option, instead of relying on randomness to provide a useful value
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48964 | file | 2006-12-25 23:31:58 -0500 (Mon, 25 Dec 2006) | 2 lines
Add an API call that initializes an RTP structure. We need this because chan_sip is cheeky and uses a temporary RTP structure for codec purposes, and the API calls that are used rely on the lock. (Pointed out on asterisk-dev by Andy Wang)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
defined in indications.h to ind_tone_zone_sound and ind_tone_zone,
to avoid conflicts with the structs with the same names
defined in tonezone.h
Hope i haven't missed any instance.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
done for exactly how much memory is needed. This was suggested by Luigi on
the asterisk-dev mailing list. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48933 65c4cc65-6c06-0410-ace0-fbb531ad65f3
this, implementing locking of this list to make it thread-safe.
- Add a "redirect" option to http.conf that allows redirecting one URI to
another. I was inspired to do this while playing with the Asterisk GUI. I
got tired of typing this URL to get to the GUI:
http://localhost:8088/asterisk/static/config/cfgadvanced.html
So, now I have the following line in http.conf:
redirect=/=/asterisk/static/config/cfgadvanced.html
Now, I can type the following into my browser and go to the GUI:
http://localhost:8088
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
before calling it.
This allows generators to set it to NULL when they have nothing to
do there.
Later, the three copies of the code that releases a generator
should be moved to a function.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48766 65c4cc65-6c06-0410-ace0-fbb531ad65f3