The variables body parameter under the originate and originate with id
operations of the channel resource showed invalid JSON in its description.
The variables body parameter under the userEvent operation of the event
resource made no mention that the custom key/value pairs should be wrapped
in a variables key in order to be added to the custom user event.
ASTERISK-23975 #close
Review: https://reviewboard.asterisk.org/r/3692/
........
Merged revisions 417878 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some performance testing of Asterisk with AGI, ARI, and lots of Local
channels, we noticed that there's quite a hit in performance during channel
creation and releasing to the dialplan (ARI continue). After investigating
the performance spike that occurs during channel creation, we discovered
that we create a lot of channel snapshots that are technically unnecessary.
This includes creating snapshots during:
* AGI execution
* Returning objects for ARI commands
* During some Local channel operations
* During some dialling operations
* During variable setting
* During some bridging operations
And more.
This patch does the following:
- It removes a number of fields from channel snapshots. These fields were
rarely used, were expensive to have on the snapshot, and hurt performance.
This included formats, translation paths, Log Call ID, callgroup, pickup
group, and all channel variables. As a result, AMI Status,
"core show channel", "core show channelvar", and "pjsip show channel" were
modified to either hit the live channel or not show certain pieces of data.
While this is unfortunate, the performance gain from this patch is worth
the loss in behaviour.
- It adds a mechanism to publish a cached snapshot + blob. A large number of
publications were changed to use this, including:
- During Dial begin
- During Variable assignment (if no AMI variables are emitted - if AMI
variables are set, we have to make snapshots when a variable is changed)
- During channel pickup
- When a channel is put on hold/unhold
- When a DTMF digit is begun/ended
- When creating a bridge snapshot
- When an AOC event is raised
- During Local channel optimization/Local bridging
- When endpoint snapshots are generated
- All AGI events
- All ARI responses that return a channel
- Events in the AgentPool, MeetMe, and some in Queue
- Additionally, some extraneous channel snapshots were being made that were
unnecessary. These were removed.
- The result of ast_hashtab_hash_string is now cached in stasis_cache. This
reduces a large number of calls to ast_hashtab_hash_string, which reduced
the amount of time spent in this function in gprof by around 50%.
#ASTERISK-23811 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3568/
........
Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new channel function TALK_DETECT that, when set on a
channel, causes events indicating the start/stop of talking on a channel to be
emitted to both AMI and ARI clients.
The function allows setting both the silence threshold (the length of silence
after which we decide no one is talking) as well as the talking threshold (the
amount of energy that counts as talking). Parameters can be updated on a channel
after talk detection has been enabled, and talk detection can be removed at
any time.
The events raised by the function use a nomenclature similar to existing AMI/ARI
events.
For AMI: ChannelTalkingStart/ChannelTalkingStop
For ARI: ChannelTalkingStarted/ChannelTalkingFinished
Review: https://reviewboard.asterisk.org/r/3563/
#ASTERISK-23786 #close
Reported by: Matt Jordan
........
Merged revisions 414934 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
User events can now be generated from ARI. Events can be signalled with
arbitrary json variables, and include one or more of channel, bridge, or
endpoint snapshots. An application must be specified which will receive
the event message (other applications can subscribe to it). The message
will also be delivered via AMI provided a channel is attached. Dialplan
generated user event messages are still transmitted via the channel, and
will only be received by a stasis application they are attached to or if
the channel is subscribed to.
This change also introduces the multi object blob mechanism used to send
multiple snapshot types in a single message. The dialplan app UserEvent
was also changed to use multi object blob, and a new stasis message type
created to handle them.
ASTERISK-22697 #close
Review: https://reviewboard.asterisk.org/r/3494/
........
Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a tones URI type to the playback resource. The tone can be specified by
name (from indications.conf) or by a tone pattern. In addition, tonezone can
be specified in the URI (by appending ;tonezone=<zone>). Tones must be
stopped manually in order for a stasis control to move on from playback of
the tone. Tones may be paused, resumed, restarted, and stopped. They may
not be rewound or fast forwarded (tones can't be controlled in a way that
lets you skip around from note to note and pausing and resuming will also
restart the tone from the beginning). Tests are currently in development
for this feature (https://reviewboard.asterisk.org/r/3428/).
(closes issue ASTERISK-23433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3427/
........
Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unused RAII_VAR() declarations. The compiler cannot catch these
because the cleanup function "references" the unused variable. Some
actually allocated and released resources that were never used.
* Fixed some whitespace issues in stasis_bridges.c.
........
Merged revisions 412399 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2
uniqueid on a stack variable instead of mallocing it.
* Made send error response to ARI and AMI requests instead of just logging
excessive uniqueid length and allowing truncation. action_originate() and
ari_channels_handle_originate_with_id().
* Fixed minor truncating uniqueid hole when generating the ;2 uniqueid
string length. Created public and internal lengths of uniqueid. The
internal length can handle a max public uniqueid plus an appended ;2.
* free() and ast_free() are NULL tolerant so they don't need a NULL test
before calling.
* Made use better struct initialization format instead of the position
dependent initialization format. Also anything not explicitly initialized
in the struct is initialized to zero by the compiler.
* Made ast_channel_internal_set_fake_ids() use the safer
ast_copy_string() instead of strncpy().
Review: https://reviewboard.asterisk.org/r/3371/
........
Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change turns the bridge type field into a comma separated list of attributes.
These attributes include: mixing, holding, dtmf_events, and proxy_media. By setting
the various attributes a user can control the type of bridge created with the
behavior they need for their application.
(closes issue ASTERISK-23437)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3359/
........
Merged revisions 410904 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed off-nominal json ref counting issue with using the following API
calls: ast_json_object_set() and ast_json_array_append().
* Fixed off-nominal error reporting in ast_ari_endpoints_list().
* Fixed some miscellaneous off-nominal json ref counting issues in
report_receive_fax_status() and dial_to_json().
........
Merged revisions 408713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch tweaks the behaviour of POST /channels with channel variables such
that the variables are passed into the pbx.c routines that perform the
origination. This allows the variables to be assigned to the newly created
channels immediately upon their construction, as opposed to be assigned after
the originate has completed.
The upshot of this is that the variables are available on the channels if
they execute in the dialplan, as opposed to only being available once the
channels are answered.
Review: https://reviewboard.asterisk.org/r/3183/
........
Merged revisions 407937 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407940 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds back in support for specifying channel variables during an
originate without compromising the ability to specify query parameters
in the JSON body. This was accomplished by generating the body-parsing
code in a separate function instead of being integrated with the URI
query parameter parsing code such that it could be called by paths with
body parameters. This is transparent to the user of the API and
prevents manual duplication of code or data structures.
(closes issue ASTERISK-23051)
Review: https://reviewboard.asterisk.org/r/3122/
Reported by: Matt Jordan
........
Merged revisions 406003 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI commands:
PUT mailboxes/mailboxName
modifies mailbox state and implicitly creates new mailboxes
GET mailboxes/mailboxName
retrieves a JSON representation of a single mailbox if it exists
GET mailboxes
retrieves a JSON array of all mailboxes
DELETE mailbox/mailboxName
deletes a mailbox
Note that res_mwi_external must be loaded for these functions to
actually do anything.
Review: https://reviewboard.asterisk.org/r/3117/
........
Merged revisions 405553 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a few memory leaks that were found based
on a mailing list post.
1. Some JSON response messages were never freed. This was
caused by the documentation stating that message references
were stolen when in reality they were not. The code now follows
the documentation and usage has been updated.
2. HTTP response headers were never freed.
3. The variable list for wildcards paths was never freed.
(closes issue ASTERISK-23128)
Reported by: Kenneth Watson (on list)
Review: https://reviewboard.asterisk.org/r/3119/
........
Merged revisions 405325 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we added support for specifying channel variables for an
origination, we didn't consider how that would interact with another
feature, namely specifying request parameters in a JSON request body.
The method of specifying channel variables (as a flat JSON object passed
in the JSON body) interferes with parsing parameters out of the request
body.
Unfortunately, fixing this would be a backward incompatible change. In
the interest of keeping the API sane and keeping our release schedule,
we're dropping the feature for specifying channel variables in the
origination request.
We will bring the feature back soon, as a backward compatible addition
to the API.
(closes issue ASTERISK-23051)
Review: https://reviewboard.asterisk.org/r/3088
........
Merged revisions 404509 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404512 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for ARI already specifies that the device state resource when
used for subscribing for events is "deviceState", not "device_state". The code,
however, used "device_state"; although this was inconsistent as well in doxygen
comments in resource_applications.
Because the actual resource being subscribed to is /deviceStates/{device}/, it
makes sense for the resource type specifier to be deviceState.
Note that the key value in the events is still "device_state".
........
Merged revisions 404437 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When creating channels via ARI, the current code fails to provide any default
format capabilities. For non-virtual channels this isn't really a problem -
the channels typically receive their capabilities as a result of the
underlying channel driver configuration. For virtual channels (such as Local
channels), the lack of any format capabilities causes the Asterisk core to
make some 'odd' choices with respect to the translation paths. The issue
reporter had some paths that had 3 hops on each channel leg, causing multiple
transcodings and some really crappy audio/performance.
By specifying a baseline of SLIN, we prevent that from occurring. Note that
this is what AMI does when it performs an Originate, as does res_clioriginate.
Review: https://reviewboard.asterisk.org/r/3068/
(issue ASTERISK-22962)
Reported by: Matt DiMeo
........
Merged revisions 403993 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to specify channel variables when creating/originating a
channel in ARI. The variables are sent in the body of the request and should
be formatted as a single level JSON object. No nested objects allowed.
For example: {"variable1": "foo", "variable2": "bar"}.
(closes issue ASTERISK-22872)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3052/
........
Merged revisions 403752 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to have rules that are checked when adding and/or removing
channels to/from a bridge. In this case, if a channel is currently recording
and someone attempts to add it to a bridge an "is recording" rule is checked,
fails, and a 409 conflict is returned.
Also command functions now return an integer value that can be descriptive of
what kind of problems, if any, occurred before or during execution.
(closes issue ASTERISK-22624)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2947/
........
Merged revisions 403749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created a data model and implemented functionality for an ARI device state
resource. The following operations have been added that allow a user to
manipulate an ARI controlled device:
Create/Change the state of an ARI controlled device
PUT /deviceStates/{deviceName}&{deviceState}
Retrieve all ARI controlled devices
GET /deviceStates
Retrieve the current state of a device
GET /deviceStates/{deviceName}
Destroy a device-state controlled by ARI
DELETE /deviceStates/{deviceName}
The ARI controlled device must begin with 'Stasis:'. An example controlled
device name would be Stasis:Example. A 'DeviceStateChanged' event has also
been added so that an application can subscribe and receive device change
events. Any device state, ARI controlled or not, can be subscribed to.
While adding the event, the underlying subscription control mechanism was
refactored so that all current and future resource subscriptions would be
the same. Each event resource must now register itself in order to be able
to properly handle [un]subscribes.
(issue ASTERISK-22838)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3025/
........
Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change prevents channels used as implementation details from
leaking out to ARI. It does this by preventing creation of JSON blobs
of channel snapshots created from those channels and sanitizing JSON
blobs of bridge snapshots as they are created. This introduces a
framework for excluding information from output targeted at Stasis
applications on a consumer-by-consumer basis using channel sanitization
callbacks which could be extended to bridges or endpoints if necessary.
This prevents unhelpful error messages from being generated by
ast_json_pack.
This also corrects a bug where BridgeCreated events would not be
created.
(closes issue ASTERISK-22744)
Review: https://reviewboard.asterisk.org/r/2987/
Reported by: David M. Lee
........
Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Was returning a 404 on a valid technology with an empty list of endpoints.
Now checking against the channel tech to make sure the tech itself is valid
and not just an empty list of endpoints.
(issue ASTERISK-22803)
Reported by: David M. Lee
........
Merged revisions 402793 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implementation listing endpoints by technology returned an empty array if no
matching endpoints were found. Fixed so a "404 Not Found" will be returned
instead.
(closes issue ASTERISK-22803)
Reported by: David M. Lee
........
Merged revisions 402787 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While working on building client libraries from the Swagger API, I
noticed a problem with the nicknames.
channel.deleteChannel()
channel.answerChannel()
channel.muteChannel()
Etc. We put the object name in the nickname (since we were generating C
code), but it makes OO generators redundant.
This patch makes the nicknames more OO friendly. This resulted in a lot
of name changing within the res_ari_*.so modules, but not much else.
There were a couple of other fixed I made in the process.
* When reversible operations (POST /hold, POST /unhold) were made more
RESTful (POST /hold, DELETE /unhold), the path for the second operation
was left in the API declaration. This worked, but really the two
operations should have been on the same API.
* The POST /unmute operation had still not been REST-ified.
Review: https://reviewboard.asterisk.org/r/2940/
........
Merged revisions 402528 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ring operation sends ringing to the specified channel it is invoked on.
The dtmf operation can be used to send DTMF digits to the specified channel
of a specific length with a wait time in between. Finally hangup reasons
allow you to specify why a channel is being hung up (busy, congestion).
Early media behavior has also been tweaked slightly. When playing media to a channel
it will no longer automatically answer. If it has not been answered a progress indication
is sent instead.
(closes issue ASTERISK-22701)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2916/
........
Merged revisions 402358 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a Stasis application is specified an implicit subscription is done on the originated
channel. This was previously done with the channel lock held which is dangerous as the
underlying code locks the container and iterates items. This change releases the lock
on the originated channel before subscribing occurs.
(closes issue ASTERISK-22768)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2979/
........
Merged revisions 402346 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it clear that the ARI API calls for listing channels and
bridges will list all channels or bridges in the system and not just
those that are in or are controlled by a Stasis application.
(closes issue ASTERISK-22635)
Reported by: Kevin Harwell
........
Merged revisions 401087 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an /applications API to ARI, allowing explicit management of
Stasis applications.
* GET /applications - list current applications
* GET /applications/{applicationName} - get details of a specific application
* POST /applications/{applicationName}/subscription - explicitly subscribe to
a channel, bridge or endpoint
* DELETE /applications/{applicationName}/subscription - explicitly unsubscribe
from a channel, bridge or endpoint
Subscriptions work by a reference counting mechanism: if you subscript to an
event source X number of times, you must unsubscribe X number of times to stop
receiveing events for that event source.
Review: https://reviewboard.asterisk.org/r/2862
(issue ASTERISK-22451)
Reported by: Matt Jordan
........
Merged revisions 400522 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r400318 | mmichelson | 2013-10-02 17:08:49 -0500 (Wed, 02 Oct 2013) | 12 lines
Remove unnecessary waits from stasis.
Since caches are updated on publisher threads, there is no need
to wait for the cache updates to occur after a stasis message
is published.
In the case of chan_pjsip device state changes, this set of
changes caused an improvement to performance.
Review: https://reviewboard.asterisk.org/r/2890
........
r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed, 02 Oct 2013) | 3 lines
Remove svn:mergeinfo property.
........
Merged revisions 400318-400319 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
his patch implements the ARI API's for stored recordings. While the
original task only specified deleting a recording, it was simple
enough to implement the GET for all recordings, and for an individual
recording.
The recording playback operation was modified to use the same code for
accessing the recording as the REST API, so that they will behave
consistently.
There were several problems with the api-docs that were also fixed,
bringing the ARI spec in line with the implementation. There were some
'wishful thinking' fields on the stored recording model (duration and
timestamp) that were removed, because I ended up not implementing a
metadata file to go along with the recording to store such information.
The GET /recordings/live operation was removed, since it's not really
that useful to get a list of all recordings that are currently going
on in the system. (At least, if we did that, we'd probably want to
also list all of the current playbacks. Which seems weird.)
(closes issue ASTERISK-21582)
Review: https://reviewboard.asterisk.org/r/2693/
........
Merged revisions 397985 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds error checking to ARI bridge operations, when
adding/removing channels to/from bridges.
In general, the error codes fall out as follows:
* Bridge not found - 404 Not Found
* Bridge not in Stasis - 409 Conflict
* Channel not found - 400 Bad Request
* Channel not in Stasis - 422 Unprocessable Entity
* Channel not in this bridge (on remove) - 422 Unprocessable Entity
(closes issue ASTERISK-22036)
Review: https://reviewboard.asterisk.org/r/2769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds ARI functions to be able to turn on/off music on hold in a
bridge. It actually functions more as a background music without
further actions on the bridge since if the rest of the channels
in the bridge aren't explicitly muted, they will still be able
to communicate.
(closes issue ASTERISK-21974)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2688/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both /asterisk/variable and /channel/{channelId}/variable requires a
?variable parameter to be passed into the query. But we weren't checking
for the parameter being missing, which caused a segfault.
All calls now properly return 400 Bad Request errors when the parameter
is missing. The Swagger api-docs were updated accordingly.
(closes issue ASTERISK-22273)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes ARI bridging to allow other channel operations to
happen while the channel is bridged.
ARI channel operations are designed to queue up and execute
sequentially. This meant, though, that while a channel was bridged,
any other channel operations would queue up and execute only after the
channel left the bridge.
This patch changes ARI bridging so that channel commands can execute
while the channel is bridged. For most operations, things simply work
as expected. The one thing that ended up being a bit odd is recording.
The current recording implementation will fail when one attempts to
record a channel that's in a bridge. Note that the bridge itself may
be recording; it's recording a specific channel in the bridge that
fails. While this is an annoying limitation, channel recording is
still very useful for use cases such as voice mail, and bridge
recording makes up much of the difference for other use cases.
(closes issue ASTERISK-22084)
Review: https://reviewboard.asterisk.org/r/2726/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The lonely flag is an optional flag for bridge channels that will
make them leave a bridge when a channel leaves if only lonely
channels are in the bridge at that point. This is useful for things
like ending recording and playback channels when they cease to be
interacting with other channels in the bridge.
(closes issue ASTERISK-22117)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2721/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Roles are now cleared with each entry into a bridge with addChannel.
If the roles parameter is present, the role specified will be applied
to all channels being added with the addChannel command.
(closes issue ASTERISK-21973)
Reported by: Matt Jordan
https://reviewboard.asterisk.org/r/2691/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new res_ari_asterisk.so module presents several config options
from asterisk main. Unfortunately, they aren't exported, so the module
won't load on Linux.
This patch renames the variables, adding the ast_ prefix so they will
be exported.
Review: https://reviewboard.asterisk.org/r/2737
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds basic system information access to ARI.
The results are roughly what you get from 'core show settings', with a
few minor differences.
* Data is structured, with 'build', 'system', 'config' and 'status'
sub-objects.
* Each sub-object is selectable, using the ?only= parameter. A comma
separated list can be provided to select multiple sections.
* A few config options are numeric, for which 0 means 'unlimited'.
Instead of having a special interpretation of those fields, they
are simply omitted if they're 0.
* The information is limited to what might be useful to building
external applications.
(closes issue ASTERISK-21575)
Review: https://reviewboard.asterisk.org/r/2702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Swagger allows parameters to be specified as 'allowMultiple', meaning
that the parameter may be specified as a comma separated list of
values.
I had written some of the API docs using that, but promptly forgot
about implementing it. This patch finally fills in that gap.
The codegen template was updated to represent 'allowMultiple' fields
as array/size fields in the _args structs. It also parses the comma
separated list using ast_app_separate_args(), so quoted strings in the
argument will be handled properly.
Review: https://reviewboard.asterisk.org/r/2698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This renames all files and API calls from several variants of
Stasis-HTTP to ARI including:
* Stasis-HTTP -> ARI
* STASIS_HTTP -> ARI
* stasis_http -> ari (ast_ari for global symbols, file names as well)
* stasis http -> ARI
Review: https://reviewboard.asterisk.org/r/2706/
(closes issue ASTERISK-22136)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
