Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
When adding shutdown refs for OPTIONAL_API components I accidentally
added it to the unload_module function in res_smdi. Move it to
load_module.
Change-Id: I2b9da38fbc11ef78ea23dbb2df92b684be7f647c
res_hep_pjsip.so and res_hep_rtcp.so will still load and do a lot of
unnecessary work even if 'enabled' is set to 'no' in hep.conf.
Change-Id: I3eddfeea09c6b5bc7c641952ee0ae487fd09b64b
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
add_crypto_to_stream wasn't checking for a NULL
session->inv_session->neg before calling pjmedia_sdp_neg_get_state.
This was causing a crash if the negotiation hadn't already been
completed and asterisk was compiled with --enable-dev-mode.
Change-Id: I57c6229954a38145da9810fc18657bfcc4d9d0c9
Reset the samples counter to zero when we are done playing an
announcement so that we don't skip into the middle of the first file in
the playlist.
Also add the selected annoucement to the output of 'moh show classes.'
ASTERISK-24329 #close
Reported by: Thomas Frederiksen
Change-Id: I2a5f986a31279c981592f49391409ebf38d6f6d0
When the RTCP code was transitioned over to Stasis a code change
was made to keep track of how many reports are present. This count
controlled where report blocks were placed in the RTCP report.
If a compound RTCP packet was received this logic would incorrectly
place a report block in the wrong location resulting in a write
to an invalid location.
This change removes this counting logic and always places the report
block at the first position. If in the future multiple reports are
supported the logic can be extended but for now keeping a count
serves no purpose.
ASTERISK-27382
ASTERISK-27429
Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116
When a connected line update is sent to an endpoint we do not request
a specific stream topology to be used. Previously this resulted in the
configured stream topology being used which may actually differ from the
currently negotiated topology. PJSIP is helpful in this regard in that
it will fill in any missing streams with removed ones. This results in
our own state not matching the SDP, though, and we do not apply the
negotiated SDP.
This change tweaks the code to use the actively negotiated stream
topology if it is present with a fallback to the configured one. This
results in the SDP and the state having matching information and the
world is happy.
ASTERISK*27397
Change-Id: I7a57117f0183479e6884b7bf3a53bb8c7464f604
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
Support for these protocols was added in the same commit as the 'proto'
field, so we can safely use the same ./configure check.
For reference: https://trac.pjsip.org/repos/changeset/4968
Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac
A couple of places were setting the status to "UNKNOWN" when qualifies were
being disabled. Instead this should be set to the "CREATED" status that
represents when a contact is given (uri available), but the qualify frequency
is set to zero so we don't know the status.
This patch updates the relevant places with "CREATED". It also updates the
"CREATED" status description (value shown in CLI/AMI/ARI output) to a value
of "NonQualified"/"NonQual" as this description is hopefully less confusing.
ASTERISK-27467
Change-Id: Id67509d25df92a72eb3683720ad2a95a27b50c89
Use the new ast_cli_completion_add() function to improve completion
performance for commands like 'pjsip show endpoint.'
Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348
Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.
This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.
Related to ASTERISK~26806, but does not completely resolve it.
Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and
res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for
dependent modules.
Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3
For both dynamic and static contacts it was possible that potential AOR
changes were not being applied to all contacts. This was because the qualify
and schedule code was only retrieving AOR's, and contacts with frequencies
greater than zero.
For instance the following could happen: and AOR/contact has a frequency of 5,
it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are
stopped, a list of AOR's is retrieved with frequency > 0, but none are
selected since in this scenario all are 0. The contact for the one previously
set to 5 though does not get updated, so it's status remains "AVAILABLE".
This patch makes it so all contacts (static and dynamic) are selected, and
appropriately updated if need be.
ASTERISK-27467 #close
Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb
Dynamic contacts were not being properly updated on reload. As a matter of
fact any changes to the AOR that a dynamic contact was associated with were
not being applied.
On reload, this patch makes it so for each dynamic contact, the associated
AOR is now retrieved and the AOR's fields are applied to the contact.
ASTERISK-27467
Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d
The SuccessfulAuth using_password field was declared as a pointer to a
uint32_t when the field was later read as a uint32_t value. This resulted
in unnecessary casts and a non-portable field value reinterpret in
main/security_events.c:add_json_object(). i.e., It would work on a 32 bit
architecture but not on a 64 bit big endian architecture.
Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935
More complicated direct media reinvite negotiations can result in longer
delays before direct media flows. The strictrtp learning timeout time
was too short. One log showed that the first RTP packet came in just
after three seconds.
* Increase the strictrtp learning timeout time from 1.5 to 5 seconds.
ASTERISK-27453
Change-Id: Ic5e711164cbb91b4d1c1e40c83697755640f138c
This change makes the presence of the GMIME_MAJOR_VERSION
definition optional, as not all versions of gmime actually
define it.
ASTERISK-27454
Change-Id: I01d99590045971ed6787899147170a5954077238
The patch for ASTERISK_24560 inverted a test checking if the bridge name
is being updated to a different name.
* Fix the test to return "Changing bridge name is not implemented" when
someone attempts to change the bridge name.
ASTERISK-27445
Change-Id: I4b70bf08b0e02e016108b077ff75b345dec12fc9
Previously, Asterisk sent srflx only when configured exclusively for IPv4. Now,
srflx is gathered and sent via SDP, even when Asterisk is enabled for
Dual Stack (IPv4+IPv6) and an IPv4 interface is available/used.
ASTERISK-27437
Change-Id: Ie07d8e2bfa7b6fe06fcdc73d390a7a9a4d8c0bc1
res_parking had an inplicit load_pri of 0 meaning it was one of the very
first modules loaded after modules with global symbols. Set it to
AST_MODPRI_DEVSTATE_PROVIDER as it provides device state for parking
lots.
Change-Id: I297b6fb3ff6993ec004e667b22a74f5925906259
res_mwi_external_ami specified AST_MODFLAG_LOAD_ORDER but didn't set
load_pri, resulting in an actual load priority of 0. This module only
provides AMI actions so it has no reason to load early.
Change-Id: I82987fcf10d3ea42716b2f9df915b16687fd5839
Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.
Change-Id: I0123258eafce324249433a69df15a85cc16e509f
Mac doesn't like the comparison of -1 to an enum, so store the result of
ast_sip_str_to_dtmf to an int so we can check for the negative return
value. ast_sip_str_to_dtmf returns an int so this is only delaying the
implicit type cast.
Change-Id: I0c262c1719ee951aae1f437d733a301cf5f8ad29
Some net-snmp builds do not provide the RONLY declare, only
NETSNMP_OLDAPI_RONLY. Map RONLY to NETSNMP_OLDAPI_RONLY to get around
this error.
Change-Id: Ida5c7ad9406515825485c4d3b4a34fd6ad0da577
It's impossible for gwtimeout or fdtimeout to be less than 0 because
they are unsigned int's. Remove checks and unreachable branches.
Change-Id: Ib2286960621e6ee245e40013c84986143302bc78
Some clients do not send rtp packets every ptime ms. This can lead to
situations in which the rtp source learning algorithm will never learn
the address of the client. This has been discovered on a Mac mini with
a pjsip based softphone after updating to Sierra: as soon as USB
headsets are involved, the softphone will send the second packet 30ms
after the first, the third 30ms after the second and the fourth 1ms
after the third. So in the old implmentation the rtp source learning
algorithm was repeatedly reset on the fourth packet.
The patch changes the algorithm in a way that doesn't take the arrival
time between two consecutive packets into account but the time between
the first and the last packet of a learning sequence.
The patch also fixes a second problem: when a user was using a wrong
value for the probation setting there was a LOG_WARNING output stating
that the value had been set to the default value instead. However
the code for setting the value back to defaults was missing.
ASTERISK-27421 #close
Change-Id: If778fe07678a6fd2041eaca7cd78267d0ef4fc6c
Domains themselves can be up to 255 characters long (per RFC 1035), so
our current buffer sizes are wholly inadequate for many use cases.
Change-Id: If3f30a68307f1365a1fe06bc4b854c62842c9292
We were not \0 terminating this string, so any attempt to print it would
in the best case show an empty string and in the worst case potentially
crash.
Change-Id: I63d96ef8f7516ac02a0f91e22dfa8acdc615042c
Previously for PJSIP the local address of WebSocket connections
was set to the remote address. For logging purposes this is
not particularly useful.
The WebSocket API has been extended to allow the local
address to be queried and this is used in PJSIP to set the
local address to the correct value.
The PJSIP HEP support has also been tweaked so that reliable
transports always use the local address on the transport
and do not try to (wrongly) guess. As they are connection
based it is impossible for the source to be anything else.
ASTERISK-26758
ASTERISK-27363
Change-Id: Icd305fd038ad755e2682ab2786e381f6bf29e8ca
Some consumers of the sorcery API use ast_sorcery_retrieve_by_regex
only so that they can anchor the potential match as a prefix and not
because they truly need regular expressions.
Rather than using regular expressions for simple prefix lookups, add
a new operation - ast_sorcery_retrieve_by_prefix - that does them.
Change-Id: I56f4e20ba1154bd52281f995c27a429a854f6a79
A previous commit made it so when an invite session transitioned into a
disconnected state destruction of the Asterisk pjsip session object was
postponed until either a transport error occurred or the event timer
expired. However, if a call was rejected (for instance a 488) before the
session was fully established the event timer may not have been initiated,
or it was canceled without triggering either of the session finalizing states
mentioned above.
Really the only time destruction of the session should be delayed is when a
BYE is being transacted. This is because it's possible in some cases for the
session to be disconnected, but the BYE is still transacting.
This patch makes it so the session object always gets released (no more
memory leak) when the pjsip session is in a disconnected state. Except when
the method is a BYE. Then it waits until a transport error occurs or an event
timeout.
ASTERISK-27345 #close
Reported by: Corey Farrell
Change-Id: I1e724737b758c20ac76d19d3611e3d2876ae10ed
* Pre-initialize cloned media state vectors to final size to ensure
vector errors cannot happen later in the clone initialization.
* Release session_media on vector replace failure in
ast_sip_session_media_state_add.
* Release clone and media_state in ast_sip_session_refresh if we fail to
append to the stream topology, return an error.
Change-Id: Ib5ffc9b198683fa7e9bf166d74d30c1334c23acb
One of the patches for ASTERISK_27147 introduced a deadlock regression.
When the connection oriented transport shut down, the code attempted to
remove the associated contact. However, that same transport had just
requested a registration that we hadn't responded to yet. Depending
upon timing we could deadlock.
* Made send the REGISTER response after we completed processing the
request contacts and released the AOR lock to avoid the deadlock.
ASTERISK-27391
Change-Id: I89a90f87cb7a02facbafb44c75d8845f93417364
* res/stasis/app.c JSON passed to app_send needs to be released.
* res/stasis_message.c: objects leak if vector append fails.
Change-Id: I8dd5385b9f50a5cadf2b1d16efecffd6ddb4db4a
Asterisk will crash if contact uri is invalid, so contact_apply_handler
should check if the uri is NULL or empty.
ASTERISK-27393 #close
Reported-by: Aaron An
Tested-by: AaronAn
Change-Id: Ia0309bdc6b697c73c9c736e1caec910b77ca69f5
wizard_apply_handler():
- Free host if we fail to add it to the vector.
wizard_mapped_observer():
- Check for otw allocation failure.
- Free otw if we fail to add it to the vector.
Change-Id: Ib5d3bcabbd9c24dd8a3c9cc692a794a5f60243ad
When stasis_app_message_handler needs to queue a message for a later
connection it needs to bump the message reference so it doesn't get
freed when the caller releases it's reference.
Change-Id: I82696df8fe723b3365c15c3f7089501da8daa892
This change makes it so that any user of the pubsub
API that requests the remote URI receives only the URI.
Previously the entire string was returned, which could
contain a display name.
ASTERISK-27290
Change-Id: If1d0cd6630f0a264856d31d2a67933109187a017
Jenkins2
Corey Farrell
Sean Bright
Richard Mudgett
George Joseph
Kevin Harwell
Joshua Colp
Alexander Traud
Pirmin Walthert
Aaron An