We previously allowed resample and g711 codecs to be built when
TEST_FRAMEWORK was enabled. This could cause errors if the testsuite
was run without this option enabled. Switch the build system to allow
those codecs to be built when --enable-dev-mode is used. This removes a
chance for strange testsuite errors from use of an inadequate pjsua
binary.
Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22
This change brings in PJSIP 2.8, removes all the patches
that were merged upstream, and makes a minor change to
support a breaking change that was done.
ASTERISK-28059
Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189
When <http://github.com/BelledonneCommunications/bcg729> is installed, PJProject
tries to link that. Support for this bcg729 was added with PJProject 2.7. The
issue happens, because Teluu enabled that new feature on default.
ASTERISK-27584
Reported by: Stuart Henderson
Change-Id: I88b6b18ad777bcfe2d8201187b4b90eec0a172a6
The definition in config_site.h and the argument to the
configure script are not necessary to disable WebRTC
support. The correct argument, --disable-libwebrtc, is
already passed.
ASTERISK-26980
Change-Id: I27da2c894f87914956a72710222e17462d8a44bc
There wasn't any good way to pass options like --host or --build
down to the pjproject configure which makes cross-compiling difficult.
* Added a new PJPROJECT_CONFIGURE_OPTS environment variable which
can be used to pass arbitrary options to pjproject configure.
* Automatically set the pjproject configure --host and --build
options to match those supplied for the asterisk configure.
ASTERISK-27097 #close
Reported-by: Kinsey Moore
Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e
We now mirror the pjproject tarball and md5 at
https://github.com/asterisk/third-party/tree/master/pjproject
To improve download reliability, we now get the tarball from
our mirror instead of from pjsip.org.
ASTERISK-27052 #close
Reported-by: 'alex'
Change-Id: I60236587a8935bfa71fcc391f4e2ecb31918c08a
Without the disable, pjproject tries to build it's internal
webrtc implementation which requires sse2. This fails on
platforms without sse2.
ASTERISK-26930 #close
Reported-by: abelbeck
Change-Id: I07231f9160c35cfa42b194d3aad4e7d51fd9a410
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
libresample is only needed by pjproject if we're building pjsua, which
we only do if TEST_FRAMEWORK is selected. It's required by pjsua to
process audio which is needed by some testsuite tests. Unfortunately,
pjproject relies on a newer version of libresample than the version
that ships by most distros so we need to compile the version that's
bundled with pjproject. Since we only need it for pjsua, we DON'T want
it's symbols exposed when we actually build asterisk.
There was a problem however... TEST_FRAMEWORK is only known AFTER we've
already run ./configure on both asterisk and pjproject but pjproject's
./configure needs to test it to know whether to set up to build
libresample or not. The previous way of figuring this out was to
always tell ./configure "yes" but not actually build the library. This
caused an issue where building libasteriskpj was being told to include
libresample but it wasn't actually there.
The solution is to still do a default pjproject configure during an
asterisk ./configure but if makeopts or menuselect.makeopts changes
subsequently, we now reconfigure pjproject, taking into account the
current state of TEST_FRAMEWORK. Previously, if makeopts or
menuselect.makeopts changed, only a recompile of pjproject was done.
Change-Id: I9b5d84c61384a3ae07fe30e85c49698378cc4685
In order for pjsua and its python binding to actually negotiate
audio for the testsuite tests, it needs g711 and resample. The
pj* libraries themselves do not. Unfortunately, pjproject relies
on a brand new libresample that most distros don't ship so we need
to use the libresample already bundled with pjproject. Only the pjsua
executable and the _pjsua.so python library are linked with it so it
shouldn't interfere with asterisk itself.
Also it was pointed out that apply_patches couldn't handle multiple
patches that depended on each other during the dry-run, so the
dry-run was removed.
Change-Id: I24f397462b486dcdde0dcafe40e6c55a6593f098
* CFLAGS is now properly set when using older gcc.
* All third-party pjproject targets have been removed. This fixes
an issue with older libsrtp in some distros.
* Manually removing the source directory now causes a rebuild.
* EXTERNALS_CACHE_DIR is now properly checked.
* Whitespace fixes.
Change-Id: I98fec6847efc5602a9f41cb95096fd660a49fa60
Add more --disable-* switches to Makefile.rules including
--disable-opus which was causing bundled pjproject to fail with
"undefined reference" errors in libasteriskpj.
Changed PJ_ENABLE_EXTRA_CHECK to 1.
Removed 2 obsolete patches and added a new one.
The new one was merged by Teluu on 6/27/2016.
ASTERISK-26148 #close
Change-Id: Ib8af6c6a9d31f7238ce65b336134c2efdc855063
The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
The python bindings are now built only if TEST_FRAMEWORK is set and a
python development package is installed.
libresample was also disabled.
ASTERISK-25993 #close
Reported-by: Joshua Colp
Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
For all OSes:
* Disabled third-party codecs in pjproject and added
'--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the
configure options since we don't use the pjsip codec capability.
FreeBSD:
* Added FreeBSD support to install_prereq.
* Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make".
* Added __progname and environ to asterisk.exports.in.
* Reverted the use of ldconfig to create shared library symlinks to ln.
* Only enable epoll in pjproject if `uname -s` is Linux.
* Added a patch to pjproject to take the name of the 'make' command from
an environment variable if supplied. This is needed for the python bindings.
(merged by Teluu into pjproject trunk 5/3/2016)
FreeBSD support isn't complete. Still some general issues regarding
make/gmake having nothing to do with pjproject. With some handholding it DOES
build successfully.
CentOS:
Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH.
CentOS 6/7 32/64 build and run the pjsip testsuite successfully.
Ubuntu:
No changes required.
Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully.
Debian:
No changes required.
Debian 6/7/8 32/64 build and run the pjsip testsuite successfully.
There will utimately be a follow-up patch to create an install_prereq for
the testsuite as I've discovered a few missing requirements.
ASTERISK-25968 #close
Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c
PortAudio should no longer be required
PJSIP_MAX_PKT_LEN is now 6000
Older autoconf issue fixed. (CentOS 6)
Change-Id: I463fa9586cbe7c6b3b603289f535bd8e361611dd
The pjproject Makefile now uses the Asterisk optimization flags which
are determined by the setting of the DONT_OPTMIZE menuselect flag.
The Makefile was also restructured so a change to the top level
menuselect.makeopts will result in a rebuild of pjproject.
Also, "--disable-resample" was removed from the pjproject configure
options. Without resample, pjsua (which is used by the testsuite)
can't make audio calls. When it can't, it segfaults.
Change-Id: I24b0a4d0872acef00ed89b3c527a713ee4c2ccd4
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
