ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* format_pref: In ast_codec_pref_prepend, if any occurrence of the specified
codec is not found, the value used to index into the array pref->order
would be one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
........
Merged revisions 362485 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362496 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of modules in main that did not handle the
negative return value from function calls adequately, or were not sufficiently
clear that the conditions leading to improper handling of the return values
could not occur. This includes:
* asterisk.c: A negative return value from the read function would be used
directly as an index into a buffer. We now check for success of the read
function prior to using its result as an index.
* manager.c: Check for failures in mkstemp and lseek when handling the
temporary file created for processing data returned from a CLI command in
action_command. Also check that the result of an lseek is sanitized prior
to using it as the size of a memory map to allocate.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362360 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The current Security Events Framework API only supports IPv4 when it comes to
generating security events. This patch does the following:
* Changes the Security Events Framework API to support IPV6 and updates
the components that use this API.
* Eliminates an error message that was being generated since the current
implementation was treating an IPv6 socket address as if it was IPv4.
* Some copyright dates were updated on files touched by this patch.
(closes issue ASTERISK-19447)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
security_events_ipv6v3.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doing Set(MESSAGE_DATA(key)=) would add an empty key header if the key
header did not already exist. If it already existed it would delete it.
* Made msg_set_var_full() exit early if the named variable did not already
exist and the value to set is empty.
........
Merged revisions 361522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Hangup now can take a regular expression as the Channel option. If you want
to hangup multiple channels, use /regex/ as the Channel option. Existing
behavior to hanging up a single channel is unchanged, but if you pass a regex,
the manager will send you a list of channels back that were hung up.
(closes issue ASTERISK-19575)
Reported by: Mark Murawski
Tested by: Mark Murawski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, a connected line update was queued during
call pickup and then an answer frame was queued. The original
caller would presumably then have his connected line updated
and then the call would be answered.
In actuality, the answer frame was not how the call ended up
being answered. Rather, an odd section in app_dial that checks
if the called channel's state is up.
The result is that the order of the connected line update and
the answer were variable. In most cases, this wasn't actually
a bad thing. However, if the 'I' option was passed to dial, the
connected line update would be inhibited.
The fix is to queued the connected line after the answer frame is
queued. This way the race in app_dial is between two
conditions resulting in an answer. This way the connected line
update occurs after the answer every time.
(closes issue ASTERISK-19183)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Mark Michelson
Patches:
ASTERISK-19183.patch uploaded by Mark Michelson (license 5049)
........
Merged revisions 360884 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360885 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360886 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Rename astobj2 API parameter funcname to func.
* Rename astobj2 API iterator parameter to iter.
* Update some documentation for OBJ_MULTIPLE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rather then flood the CLI with verbose messages, we've changed the level to
debug. This will help keep the CLI clean.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r360356 | russell | 2012-03-23 22:33:36 -0400 (Fri, 23 Mar 2012) | 6 lines
expression parser: Fix (theoretical) memory leak.
Fix a memory leak that is very unlikely to actually happen. If a malloc()
succeeded, but the following strdup() failed, the memory from the original
malloc() would be leaked.
........
r360357 | russell | 2012-03-23 22:34:39 -0400 (Fri, 23 Mar 2012) | 6 lines
Rebuild parsers.
This is needed to include the last fix to main/ast_expr2.y. The changes look
much bigger as this regeneration of the code was done with newer versions of
flex and bison.
........
Merged revisions 360356-360357 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360358 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Q.951 indicates that when the presentation indicator is "Number not
available due to interworking" for a number then the screening indicator
field should be "Network provided".
* Made ast_party_id_presentation() return AST_PRES_NUMBER_NOT_AVAILABLE
when the presentation is "Number not available due to interworking". This
fix makes Asterisk consistent and it also makes it consistent with earlier
branches as far as this presentation value is concerned.
* Made pri_to_ast_presentation() and ast_to_pri_presentation() conversions
handle the "Number not available due to interworking" case better in
sig_pri.c. This change is possible because the minimum required libpri
version (v1.4.11) has the necessary defines in libpri.h.
........
Merged revisions 360309 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360310 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix AMI module reload deadlock regression from ASTERISK-18479 when it
tried to fix the race between calling an AMI action callback and
unregistering that action. Refixes ASTERISK-13784 broken by
ASTERISK-17785 change.
Locking the ao2 object guaranteed that there were no active callbacks that
mattered when ast_manager_unregister() was called. Unfortunately, this
causes the deadlock situation. The patch stops locking the ao2 object to
allow multiple threads to invoke the callback re-entrantly. There is no
way to guarantee a module unload will not crash because of an active
callback. The code attempts to minimize the chance with the registered
flag and the maximum 5 second delay before ast_manager_unregister()
returns.
The trunk version of the patch changes the API to fix the race condition
correctly to prevent the module code from unloading from memory while an
action callback is active.
* Don't hold the lock while calling the AMI action callback.
(closes issue ASTERISK-19487)
Reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1818/
Review: https://reviewboard.asterisk.org/r/1820/
........
Merged revisions 359979 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359980 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unnnecessary const from const char * const var declaration in the
ast_app_run_macro() and ast_app_run_sub() prototypes. The second const is
unnecessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There exists a remotely exploitable stack buffer overflow in HTTP digest
authentication handling in Asterisk. The particular method in question
is only utilized by HTTP AMI. When parsing the digest information, the
length of the string is not checked when it is copied into temporary buffers
allocated on the stack.
This patch fixes this behavior by parsing out pre-defined key/value pairs
and avoiding unnecessary copies to the stack.
(closes issue ASTERISK-19542)
Reported by: Russell Bryant
Tested by: Matt Jordan
........
Merged revisions 359706 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359707 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added 'b' and 'B' options to Dial. These options will allow you to run
last-minute dialplan on the caller and callee channels while the Dial
application is executing, but before the call is started. For example you
can use the 'b' option to run dialplan on the callee channel to get the name
of the newly created channel right away.
Review: https://reviewboard.asterisk.org/r/1229/
(closes issue: ASTERISK-19548)
Reported by: Mark Murawski
Tested by: Mark Murawski, Stefan Schmidt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a change in time occurs, such that the timestamps associated with frames
being placed into an adaptive jitter buffer (implemented in jitterbuf.c)
are significantly different then the previously inserted frames, the jitter
buffer checks to see if it needs to be resynched to the new time frame. If
three consecutive packets break the threshold, the jitter buffer resynchs
itself to the new timestamps. This currently only occurs when history is
calculated, and hence only on JB_TYPE_VOICE frames.
JB_TYPE_CONTROL frames, on the other hand, are never passed to the history
calculations. Because of this, if the jump in time is greater then the
maximum allowed length of the jitter buffer, the JB_TYPE_CONTROL frames are
dropped and no resynchronization occurs. Alterntively, if the overfill
logic is not triggered, the JB_TYPE_CONTROL frame will be placed into the
buffer, but with a time reference that is not applicable. Subsequent
JB_TYPE_VOICE frames will quickly trigger the overflow logic until reads
from the jitter buffer reach the errant JB_TYPE_CONTROL frame.
This patch allows JB_TYPE_CONTROL frames to resynch the jitter buffer. As
JB_TYPE_CONTROL frames are unlikely to occur in multiples, it perform the
resynchronization on any JB_TYPE_CONTROL frame that breaks the resynch
threshold.
Note that this only impacts chan_iax2, as other consumers of the adaptive
jitter buffer use the abstract jitter buffer API, which does not use
JB_TYPE_CONTROL frames.
Review: https://reviewboard.asterisk.org/r/1814/
(closes issue ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
Patches:
jitterbuffer-2012-2-26.diff uploaded by Kris Shaw (license 5722)
........
Merged revisions 359356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359358 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line support was added, the wait_for_answer() variable
single changed its meaning slightly. Unfortunately, the places where
single was used did not necessarily get updated to reflect that change.
Also audio/video frames were sent to all forked calls when the endpoints
were never made compatible.
* Don't pass audio/video media frames when the channels have not been made
compatible.
* Added handling of AST_CONTROL_SRCCHANGE to app_dial.c.
* Fixed app_dial.c passing on AST_CONTROL_HOLD because that frame can also
pass a requested MOH class.
(closes issue ASTERISK-16901)
Reported by: Chris Gentle
(closes issue ASTERISK-17541)
Reported by: clint
Review: https://reviewboard.asterisk.org/r/1805/
........
Merged revisions 359344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359355 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the NUMLOGLEVELS define in logger.h to 32, to match the fact
that logger.c implements 32 log levels (because of the custom log level stuff).
asterisk.c uses this define to size an array of levels per remote console.
This array is modified in ast_console_toggle_loglevel(), which is called by the
"logger set level" CLI command. While the documentation for the CLI command
doesn't make it terribly obvious, you can use this CLI command to toggle a
custom log level on a remote console, as well. However, doing so led to an
invalid array index in asterisk.c.
This array is read from any time a log message is written to a console. So,
all custom log level messages resulted in a bogus read if a remote console
was connected.
........
Merged revisions 359259 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359260 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The set_format() function was more subtle in how it modified the
struct ast_channel readtrans/writetrans values.
* Fixed ast_activate_generator() conversion correctly.
(closes issue ASTERISK-19434)
Reported by: Birger Harzenetter
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The process_output function in manager.c attempted to call fclose and close immediately
afterwards. Since fclose implies close, this resulted in a potential double free on file
descriptors. This patch changes that behavior and also adds error checking to fclose and
close depending on which was deemed necessary. Also error messages. Thanks to Rosen
Iliev for pointing out the location of the problem.
(closes issue ASTERISK-18453)
Reported By: Jaco Kroon
Review: https://reviewboard.asterisk.org/r/1793/
........
Merged revisions 358214 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358215 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes case-sensitivity for device-specific subscriptions such that
the technology identifier is case-insensitive while the remainder of the device
string is still case-sensitive. This should also preserve the original case of
the device string as passed in to the event system. CCSS is the only feature
affected as it is the only consumer of device-specific event subscriptions.
The second part of this patch addresses similar case-sensitivity issues within
CCSS itself that prevented it from functioning correctly after the fix to the
events system.
This adds a unit test to verify that the event system works as expected.
(closes issue ASTERISK-19422)
Review: https://reviewboard.asterisk.org/r/1780/
........
Merged revisions 357940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357941 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The check if an ISDN call is bridged before it could be placed on hold is
not necessary and is overly restrictive. The check was originally done to
prevent problems with call transfers in case a user tried to transfer a
call connected to an application to another call connected to an
application. The ISDN transfer code has not required this restriction for
quite some time because ECT could transfer any two active calls to each
other.
* Remove ISDN hold restriction for calls connected to applications.
* Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD instead of generating a warning message.
(closes issue ASTERISK-19388)
Reported by: Birger Harzenetter
Tested by: rmudgett
........
Merged revisions 357894 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357895 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This takes two actions.
1. Move the reading of the alertpipe in __ast_read() to immediately before the
removal of frames from the readq. This means we won't do something silly like
read from the alertpipe, then ignore the fact that there's a frame to get from
the readq since channel's fdno is the AST_TIMING_FD.
2. When ast_settimeout() sets the rate to 0 and the timingfunc to NULL, if the
channel's fdno is the AST_TIMING_FD, then set the fdno to -1. This is because
if the rate is 0 and the timingfunc is NULL, it means that the channel's timing
fd is being invalidated, so any pending reads should not occur.
This may actually solve more issues than the referenced one below, but it's not
known at this time for sure.
(closes issue ASTERISK-19223)
reported by Frank-Michael Wittig
Review: https://reviewboard.asterisk.org/r/1779
........
Merged revisions 357761 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357762 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the change from 1.6.2 to 1.8, ast_sockaddr was introduced which changed the
behavior of ast_find_ourip such that port number was wiped out. This caused
the port in internip (which is used for Contact and Call-ID on NOTIFYs) to be
0. This change causes ast_find_ourip to be port-preserving again.
(closes issue ASTERISK-19430)
........
Merged revisions 357665 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357667 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to specify what kind of locking an ao2 object has when it
is allocated. The locking could be one of: MUTEX, RWLOCK, or none.
New API:
ao2_t_alloc_options()
ao2_alloc_options()
ao2_t_container_alloc_options()
ao2_container_alloc_options()
ao2_rdlock()
ao2_wrlock()
ao2_tryrdlock()
ao2_trywrlock()
The OBJ_NOLOCK and AO2_ITERATOR_DONTLOCK flags have a slight meaning
change. They no longer mean that the object is protected by an external
mechanism. They mean the lock associated with the object has already been
manually obtained by one of the ao2_lock calls. This change is necessary
for RWLOCK support since they are not reentrant. Also an operation on an
ao2 container may require promoting a read lock to a write lock by
releasing the already held read lock to re-acquire as a write lock.
Replaced API calls:
ao2_t_link_nolock()
ao2_link_nolock()
ao2_t_unlink_nolock()
ao2_unlink_nolock()
with the respective
ao2_t_link_flags()
ao2_link_flags()
ao2_t_unlink_flags()
ao2_unlink_flags()
API calls to be more flexible and to allow an anticipated enhancement to
control linking duplicate objects into a container.
The changes to format.c and format_cap.c are taking advantange of the new
ao2 locking options to simplify the use of the format capabilities
containers.
Review: https://reviewboard.asterisk.org/r/1554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix opaquification conversion error.
(closes issue ASTERISK-19424)
Reported by: Jeremy Pepper
Patches:
asterisk-19424-initialize_priority_regression.diff (license #5026) patch uploaded by Michael L. Young
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_iax2 to pass in the correct types.
chan_iax2 is the only consumer for the various ast_netsock_* functions in trunk
at this point, so this feels like a safe change to make.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Custom parking extensions may not be coded such that the first and only
extension priority is the Park application. These custom parking
extensions will not be recognized as parking extensions. When a call is
blind transferred to an extension that is not recognized as a parking
extension, the normal blind transfer code causes the transferred channel
to start executing dialplan. Calls that get parked in this manner do not
know the original channel name that parked the call so the original parker
could never be called back if the parked call is not retrieved before the
timeout time. The parking space is also announced to the call being
parked as a side effect of not knowing the original parking channel.
* Fix handling of BLINDTRANSFER channel variable for call parking.
* Fixed SIP blind transfer using the wrong dialplan context variable to
check for the parking extension.
(closes issue ASTERISK-19322)
Reported by: aragon
Tested by: rmudgett, jparker
Review: https://reviewboard.asterisk.org/r/1730/
JIRA AST-766
........
Merged revisions 356521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the res_calendar module was followed immediately by one of the
calendar tech modules and "core stop gracefully" was run, Asterisk
would crash.
This patch adds use count tracking for res_calendar so that it is
unloaded after the tech modules when shutting down gracefully. It
is now not possible to unload all the of the calendar modules via
"module unload res_calednar.so", but it is still possible to unload
them all via "module unload -h res_calendar.so".
Review: https://reviewboard.asterisk.org/r/1752/
........
Merged revisions 356291 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356297 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The accessors names for the "emulate_dtmf_digit" field on the ast_channel
are misleading. Change them to ast_channel_dtmf_digit_to_emulate*.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config parser in Asterisk does not currently remove a backslash that is
used to escape a semicolon which would otherwise be interpreted as the start
of a comment.
The change here causes that backslash to be removed, but does not create a
real escape system in the config parser. The biggest complication with a real
escape system would be breaking existing configs everywhere (parsing \\ as \
and breaking on escaped non-semicolon characters) even though it would be the
"right" way to do things.
(closes issue ASTERISK-17121)
Review: https://reviewboard.asterisk.org/r/1724/
........
Merged revisions 354655 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354656 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes some unnecessary locking of the channels container in
ast_hangup(). The reason this came up is that this lock can very quickly block
the entire system. If any of the channel cleanup code decides to block, it
causes a problem for the whole system. For example, when audiohooks get
destroyed, if that blocks for a while waiting on the mixmonitor thread to exit
because it's busy blocking on some I/O, it causes a problem for many other
threads in the meantime.
Review: https://reviewboard.asterisk.org/r/1712/
........
Merged revisions 354492 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354493 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
........
Merged revisions 353770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353820 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL eventtype field for ODBC and PGSQL backends should be USER_DEFINED
instead of the user defined event name supplied by the CELGenUserEvent
application. If the field is output as a number, the user defined name
does not have a value and is always output as 21 for USER_DEFINED and the
userdeftype field would be required to supply the user defined name.
The following CEL backends (cel_odbc, cel_pgsql, cel_custom, cel_manager,
and cel_sqlite3_custom) can be independently configured to remove this
inconsistency.
* Allows cel_manager, cel_custom, and cel_sqlite3_custom to behave the
same way.
(closes issue ASTERISK-17189)
Reported by: Bryant Zimmerman
Review: https://reviewboard.asterisk.org/r/1669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel name was opaquified, the channel search functions did not
get converted correctly. As a result ExtenSpy which uses a channel
iterator search by exten@context could never find anything.
* Updated the doxygen documentation for the search functions in channel.h.
Review: https://reviewboard.asterisk.org/r/1702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
........
Merged revisions 353371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353397 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A long time ago, in a land far far away, we added "asterisk/ast_version.h",
which provides the ast_get_version() and ast_get_version_num() functions. These
were added so that modules that needed the version information for the Asterisk
instance they were loaded in could actually get it (as opposed the version that
they were compiled against). We changed everything in the tree to use the
new mechanism (although later main/test.c was added using the old method).
However, the old mechanism was never removed, and as a result, new code is
still trying to use it.
This commit removes asterisk/version.h and replaces it with a header that
will generate a compile-time error if you try to use it (the error message
tells you which header you should use instead). It also removes the Makefile
and build_tools bits that generated the file, and it updates main/test.c to
use the 'proper' method of getting the Asterisk version information.
This is an API change and thus is being committed for trunk only, but it's
a fairly minor one and definitely improves the situation for out-of-tree
modules.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix authenticate MESSAGE losing custom headers added by the MESSAGE_DATA
function in the authorization attempt.
* Pass up better From header contents for SIP to use. Now is in the
"display-name" <URI> format expected by MessageSend. (Note that this is a
behavior change that could concievably affect some people.)
* Block user from adding standard headers that are added automatically.
(To, From,...)
* Allow the user to override the Content-Type header contents sent by
MessageSend.
* Decrement Max-Forwards header if the user transferred it from an
incoming message.
* Expand SIP short header names so the dialplan and other code only has to
deal with the full names.
* Documents what SIP expects in the MessageSend(from) parameter.
(closes issue ASTERISK-18992)
Reported by: Yuri
(closes issue ASTERISK-18917)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/1683/
........
Merged revisions 352520 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OpenBSD defines SO_PEERCRED, but it returns a 'struct sockpeercred', not
'struct ucred', which causes compilation of main/asterisk.c to fail in
read_credentials(). This allows configure to check for sockpeercred and
asterisk to deal with it properly.
(closes issue ASTERISK-18929)
Reported-by: Barry Miller
Patch-by: Barry Miller
........
Merged revisions 350730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350731 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
None of the parameters to ast_bridge_call() can be NULL for the bridge to
work so no need to check for it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Multiple revisions 350555,350571
........
r350555 | rmudgett | 2012-01-13 11:12:51 -0600 (Fri, 13 Jan 2012) | 12 lines
Add missing CEL logging fields to various CEL backends.
* Add missing eventextra to cel_psql.c and cel_odbc.c.
* Add missing PeerAccount and EventExtra to cel_manager.c.
* Add missing userdeftype support for cel_custom.conf.sample and
cel_sqlite3_custom.conf.sample.
(closes issue ASTERISK-17190)
Reported by: Bryant Zimmerman
........
r350571 | rmudgett | 2012-01-13 11:23:57 -0600 (Fri, 13 Jan 2012) | 8 lines
Use compatible names for event extra data for various CEL backends.
* Change eventextra to extra in cel_psql.c and cel_odbc.c.
* Change EventExtra to Extra in cel_manager.c.
(issue ASTERISK-17190)
........
Merged revisions 350555,350571 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350585 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses two issues in ConfBridge and the channel bridge layer:
1. It fixes a race condition wherein the bridge channel could be hung up
2. It removes the deadlock avoidance from the bridging layer and makes the
bridge_pvt an ao2 ref counted object
Patch by David Vossel (mjordan was merely the commit monkey)
(issue ASTERISK-18988)
(closes issue ASTERISK-18885)
Reported by: Dmitry Melekhov
Tested by: Matt Jordan
Patches: chan_bridge_cleanup_v.diff uploaded by David Vossel (license 5628)
(closes issue ASTERISK-19100)
Reported by: Matt Jordan
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1654/
........
Merged revisions 350550 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Initially, support was left in for the old style of searching, even
though it wasn't actually used. In the case of name_len != 0, the
OBJ_KEY flag isn't passed because we aren't matching on a full key
and therefor can't use the hash function to optimize. The code left
in to support the old way of searching unfortunately treated a prefix
search like this as though an ast_channel struct was passed as an arg
and caused a crash.
This patch also adds needed parentheses around some matching conditions.
(closes issue ASTERISK-19182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a db_sync was scheduled just before shutdown, the atexit code calling
db_sync would have no effect, causing the astdb commit thread to stay
alive. This caused the SIP/realtime_sipregs test to fail. (The fallback
kill would run the atexit code again and that would wreak havoc.) This
fixes that the atexit kill condition is picked up properly.
(closes issue ASTERISK-18883)
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1659
........
Merged revisions 350180 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Asterisk -x command line parameter is documented inconsistently.
* Made the -x documentation and behavior consistent.
* Since this is also a new year, updated the copyright notices while here.
(closes issue ASTERISK-19094)
Reported by: Eugene
Patches:
issueA19094_correct_asterisk_option_x.patch (license #5674) patch uploaded by Walter Doekes (modified)
Tested by: Eugene
........
Merged revisions 350075 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350076 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350077 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When receiving calls from a mobile phone into a DISA system on a connection with
significant interference, the reporter's Asterisk system would interpret DTMF incorrectly
and replicate digits received. This patch resolves that by increasing the number of
frames a mismatch has to be detected before assuming the DTMF is over by 1 frame and
adjusts dtmf_detect function to reset hits and misses only when an edge is detected.
(closes issue ASTERISK-17493)
Reported by: Alec Davis
Patches:
bug18904-refactor.diff.txt uploaded by Alec Davis (license 5546)
Review: https://reviewboard.asterisk.org/r/1130/
........
Merged revisions 349728 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349729 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When catching a signal, in no fork mode the console thread is identical to the thread
responsible for catching the signal and closing Asterisk, which requires it to first
dispense with the console thread. Prior to this patch, if these threads were identical,
upon receiving a killing signal, the thread will send an URG signal to itself, which
we also catch and then promptly do nothing with. Obviously this isn't useful behavior.
(closes issue ASTERISK-19127)
Reported By: Bryon Clark
Patches:
quit_on_signals.patch uploaded by Bryon Clark (license 6157)
........
Merged revisions 349672 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349673 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Failing to handle AST_CONTROL_UPDATE_RTP_PEER frames in the local bridge loop
causes the loop to exit prematurely. This causes a variety of negative side
effects, depending on when the loop exits. This patch handles the frame by
essentially swallowing the frame in the local loop, as the current channel
drivers expect the RTP bridge to handle the frame, and, in the case of the
local bridge loop, no additional action is necessary.
(issue ASTERISK-19040)
(issue ASTERISK-19128)
(issue ASTERISK-17725)
(issue ASTERISK-18340)
(closes issue ASTERISK-19095)
Reported by: Stefan Schmidt
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1640/
........
Merged revisions 349339 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349340 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit removes the V.21 preamble detection code previously added to the
generic DSP implementation in Asterisk, and instead enhances the res_fax module
to be able to utilize V.21 preamble detection functionality made available by
FAX technology modules. This commit also adds such support to res_fax_spandsp,
which uses the Spandsp modem tone detection code to do the V.21 preamble
detection.
There should be no functional change here, other than much more reliable V.21
preamble detection (and thus T.38 gateway initiation).
........
Merged revisions 349248 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds two new options to SIP peers allowing them to specify features (dynamic or builtin)
to use when sending INFO/record requests. Recordonfeature activates whatever feature
is specified when recieving a record: on request while recordofffeature activates
whatever feature is specified when receiving a record: off request. Both of these
features can be disabled by setting the feature to an empty string.
(closes issue ASTERISK-16507)
Reported by: Jon Bright
Review: https://reviewboard.asterisk.org/r/1634/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_sip gives a dialog reference to the extension state callback and
assumes that when ast_extension_state_del() returns, the callback cannot
happen anymore. Chan_sip then reduces the dialog reference count
associated with the callback. Recent changes (ASTERISK-17760) have
resulted in the potential for the callback to happen after
ast_extension_state_del() has returned. For chan_sip, this could be very
bad because the dialog pointer could have already been destroyed.
* Added ast_extension_state_add_destroy() so chan_sip can account for the
sip_pvt reference given to the extension state callback when the extension
state callback is deleted.
* Fix pbx.c awkward statecbs handling in ast_extension_state_add_destroy()
and handle_statechange() now that the struct ast_state_cb has a destructor
to call.
* Ensure that ast_extension_state_add_destroy() will never return -1 or 0
for a successful registration.
* Fixed pbx.c statecbs_cmp() to compare the correct information. The
passed in value to compare is a change_cb function pointer not an object
pointer.
* Make pbx.c ast_merge_contexts_and_delete() not perform callbacks with
AST_EXTENSION_REMOVED with locks held. Chan_sip is notorious for
deadlocking when those locks are held during the callback.
* Removed unused lock declaration for the pbx.c store_hints list.
(closes issue ASTERISK-18844)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/1635/
........
Merged revisions 348940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 348952 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add locking when a channel inherits variables and datastores in
__ast_request_and_dial() and ast_call_forward(). Note: The involved
channels are not active so there was minimal potential for problems.
* Remove calls to ast_set_callerid() in __ast_request_and_dial() and
ast_call_forward() because the set information is for the wrong direction.
* Don't use C++ keywords for variable names in ast_call_forward().
* Run the redirecting interception macro if defined when forwarding a call
in ast_call_forward(). Note: Currently will never execute because the
only callers that supply a calling channel supply a hungup or zombie
channel.
* Make feature_request_and_dial() put the transferee into autoservice when
it calls ast_call_forward() in case a redirection interception macro is
run. Note: Currently will never happen because the caller channel (Party
B) is always hungup at this time.
* Make feature_request_and_dial() ignore the AST_CONTROL_PROCEEDING frame
to silence a log message.
........
Merged revisions 348464 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 348465 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PARKEDCALL variable tracks which parking lot the call was last parked in. This can be
used afterwards for flow control when returntoorigin is set to off. I went ahead and
documented both this and the existing variable set during timeout (PARKINGSLOT) in
the sample features.conf since there was no prior mention of variables being set during
timeout.
(closes issue ASTERISK-16239)
Reported By: Clod Patry
Patches:
M17503.diff uploaded by Clod Patry (license 5138)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348161 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Simplify compare_char() and avoid potential sign extension issue.
* Fix infinite loop in add_exten_to_pattern_tree() handling of character
set escape handling.
* Added buffer overflow checks in add_exten_to_pattern_tree() character
set collection.
* Made ignore empty character sets.
* Added escape character handling to end-of-range character in character
sets. This has a slight change in behavior if the end-of-range character
is an escape character. You must now escape it.
* Fix potential sign extension issue when expanding character set ranges.
* Made remove duplicated characters from character sets. The duplicate
characters lower extension matching priority and prevent duplicate
extension detection.
* Fix escape character handling when the escape character is trying to
escape the end-of-string. We could have continued processing characters
after the end of the exten string. We could have added the previous
character to the pattern matching tree incorrectly.
(closes issue ASTERISK-18909)
Reported by: Luke-Jr
........
Merged revisions 347811 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347812 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bridge is broken, ast_bridge_call() might execute the h exten on
the calling channel. However, that channel may not have been the channel
that broke the bridge by hanging up. The channel executing the h exten
must be in a hung up state so things like AGI run in the correct mode.
* Make sure ast_bridge_call() marks the channel it is executing the h
exten on as hung up. (The AST_SOFTHANGUP_APPUNLOAD flag is used so as to
match the pbx.c main dialplan execution loop when it executes the h
exten.)
(closes issue ASTERISK-18811)
Reported by: David Hajek
Patches:
jira_asterisk_18811_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: David Hajek, rmudgett
........
Merged revisions 347595 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347600 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If waitExten specifies a music class to use with its music on hold option, it will use
CHANNEL(musicclass) instead if that channel variable has been set on the initiating
channel. This documents that behavior in the waitExten app so that this can be known
without checking the documentation of the code in function local_ast_moh_start.
(closes issue ASTERISK-18804)
........
Merged revisions 347239 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347240 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, if labels with the same name were used for different priorities in
the same extension, the new label would be accepted, but it would be unusable since
attempts to reach that label would just go to the first one. Now pbx.c detects this,
generates a warning in logs, and culls the label before adding it to the dialplan.
(closes issue ASTERISK-18807)
Reported by: Kenneth Shumard
Patches:
pbx.c.patch uploaded by Kenneth Shumard (License 5077)
........
Merged revisions 346954 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346955 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The STUN socket must remain open between polls or the external address
seen by the STUN server is likely to change. However, if the STUN request
poll fails then the STUN server address needs to be re-resolved and the
STUN socket needs to be closed and reopened.
* Re-resolve the STUN server address and create a new socket if the STUN
request poll fails.
* Fix ast_stun_request() return value consistency.
* Fix ast_stun_request() to check the received packet for expected message
type and transaction ID.
* Fix ast_stun_request() to read packets until timeout or an associated
response packet is found. The stun_purge_socket() hack is no longer
required.
* Reduce ast_stun_request() error messages to debug output.
* No longer pass in the destination address to ast_stun_request() if the
socket is already bound or connected to the destination.
(closes issue ASTERISK-18327)
Reported by: Wolfram Joost
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1595/
........
Merged revisions 346700 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346701 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Terry Wilson
Matthew Jordan
Walter Doekes
Michael L. Young
Paul Belanger
Kinsey Moore
Jonathan Rose
Mark Murawki
Mark Michelson
Russell Bryant
Joshua Colp
Kevin P. Fleming
Sean Bright
Tilghman Lesher
Leif Madsen