* Extract a useful routine from the softmix bridge technology for other
technologies. Make other technologies use it if they can.
* Made native and 1-1 bridges write to all parties if the bridge channel
writing the frame into the bridge is NULL. Softmix will also do the same
for frame types that make sense.
* Tweak the bridge write routine return value meaning and adjust the
bridge technologies to match.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge frame queue functions need to return an error status if the
frame failed to be queued because of an error condition. The main calls
that needed to return the status are:
ast_bridge_channel_queue_action_data() and
ast_bridge_channel_write_action_data(). The other return changes are
ripple effects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a threadpool is set to autoincrement its threadcount, an issue
may arise when multiple tasks are queued at once into the threadpool. Since
threads start active, each new task would result in autoincrementing the
thread count. So if all threads were active, and a thread's autoincrement
value were 5, then 3 new tasks would result in 15 threads being created even
though the initial autoincrement was sufficient to handle the number of tasks.
This change introduces three behavior changes:
1) New threads in the threadpool start idle instead of active.
2) When a threadpool autoincrements, one thread is activated after the growth.
3) When a threadpool's size is incremented manually, all added threads are activated.
For a more detailed explanation about the changes, please see the Review Board link
at the bottom of this commit.
Review: https://reviewboard.asterisk.org/r/2629
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For about forever, our build flags for OS X have been slightly off, but
good enough to build and run. Apparently they aren't good enough any more.
Previously, we would compile with macosx-version-min unset and link with
it set. This combination, using GCC 4.8, on Mountain Lion, would create a
bad executable ("Illegal Instruction: 4", or something like that)
This patch consistently sets macosx-version-min for both compiling and
linking, which makes everything happy enough to build and run.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This finishes moving all CEL linkedid tracking entirely within cel.c
since that is now possible with channel snapshots.
This also removes another CEL linkedid manipulation function from cel.h
that has already been internalized and is neither called nor available
to link against.
Review: https://reviewboard.asterisk.org/r/2632/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The type of tv_usec is suseconds_t. On Linux, this is usually a long int, but
the specification is actually pretty lax on what it might actually be. And,
sadly, there's no printf/scanf width specifier for suseconds_t. So it could
bit an int or a long, but there's not a great way to tell which it is.
This patch fixes scanf by reading into a long temporary variable that's then
stored into the tv_usec. It fixes printf by casting the tv_usec to a long
first.
This patch also adds some missing width specifiers for some debug statements,
which would cause ".000001" to be displayed at ".1".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is originated, its application is typically set to AppDial2,
indicating that it was a dialed channel through the Dial API. Asterisk during
an originate will perform a stack execute to direct the outgoing channel to
a particular place in the dialplan or application. When the stack returns, the
previous application (AppDial2) is restored.
Unfortunately, in the case of an originated channel, the stack restore happens
after hangup. A stasis message is sent notifying everyone that the application
was restored, and this causes a NewExten event to go out after the Hangup event,
violating the basic contract consumers have of the channel lifetime. While we
could preclude the message from going out, restoring the channel's state before
it executed the next higher frame in the stack has to occur, and other places
in the code depend on this behavior.
Since we know that channel hung up (it's a ZOMBIE!), this patch simply checks
to see if the channel has been zombified before sending a NewExten event.
Note that this will fix a number of bouncing tests in the Test Suite. Go tests.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In revision 389733, mwi state allocation was placed into its
own function instead of performing the allocation in-line when
required. The issue was that in ast_publish_mwi_state_full(),
the local variable "uniqueid" was no longer being set, but it was
still being used as the topic for MWI. This meant that all MWI
publications ended up being published to the "" (empty string)
mailbox topic. Thus MWI subscriptions for specific mailboxes were
never notified of mailbox state changes.
This change fixes the issue by removing the local uniqueid variable
from ast_publish_mwi_state_full() and instead referencing the
mwi_state->uniqueid field since it has been properly set.
(closes issue ASTERISK-21913)
Reported by Malcolm Davenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391921 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Properly search for bridge association structures so that they are
found when expected and handle cases where they don't exist.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridge snapshot events were missing some important transitions that
were noticed in subsequent snapshots. Snapshots will now be published
on all bridge reconfigurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The options should not be registered multiple times. Instead, the configuration just needs
to be reprocessed by the config framework. This also exposed that we were not properly telling
the config framework to treat the configuration processing with the "reload" semantics when
a reload occurred. Both of these errors are fixed now.
Thanks to Richard Mudgett for discovering the leak.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While very handy, this macro didn't occur until a later version of libjansson.
We'd prefer to be compatible with older versions still - as such, iteration
over key/value pairs in a JSON object have to be done with a little bit more
manual work.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This pulls bridge-related CEL event triggers out of the code in which
they were residing and pulls them into cel.c where they are now
triggered by changes in bridge snapshots. To get access to the
Stasis-Core parking topic in cel.c, the Stasis-Core portions of parking
init have been pulled into core Asterisk init.
This also adds a new CEL event (AST_CEL_BRIDGE_TO_CONF) that indicates
a two-party bridge has transitioned to a multi-party conference. The
reverse cannot occur in CEL terms even though it may occur in actuality
and two party bridges which receive a AST_CEL_BRIDGE_TO_CONF will be
treated as multi-party conferences for the duration of the bridge.
Review: https://reviewboard.asterisk.org/r/2563/
(closes issue ASTERISK-21564)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses the channel state change events from Stasis-Core to determine
when channel-related CEL events should be raised. Those refactored in
this patch are:
* AST_CEL_CHANNEL_START
* AST_CEL_ANSWER
* AST_CEL_APP_START
* AST_CEL_APP_END
* AST_CEL_HANGUP
* AST_CEL_CHANNEL_END
Retirement of Linked IDs is also refactored.
CEL configuration has been refactored to use the config framework.
Note: Some HANGUP events are not generated correctly because the bridge
layer does not propagate hangupcause/hangupsource information yet.
Review: https://reviewboard.asterisk.org/r/2544/
(closes issue ASTERISK-21563)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes three memory leaks
* When we load a module with the LOAD_PRIORITY flag, we remove its entry from
the load order list. Unfortunately, we don't free the memory associated with
entry in the list. This patch corrects that and properly frees the memory
for the module in the list.
* When adding a custom format (such as SILK or CELT), the routine for adding
the format was leaking a reference. RAII_VAR cleans this up properly.
* We now de-ref the channel_snapshot appropriately when an endpoint is
disposed of
........
Merged revisions 391489 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391507 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two memory leaks:
* A memory leak in packing channels into a multi-channel blob payload when
publishing dial messages. The multi-channel blob payload does not steal
the references - this approach was chosen because it works well with the
RAII_VAR macro. Unfortunately, this does mean that you actually have to use
the RAII_VAR macro (or manually deref it yourself)
* RTP instances returned as a result of one of the glue operations are ref
counted and have to be de-ref'd appropriately. We now do that, as saying
that we should do it and then not would be silly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When checking compatability for the native RTP bridge technology there is a
race condition between clearing framehooks that are destroyed when leaving
certain bridges with certain technologies (such as bridge_native_rtp) and
joining bridges with the bridge_native_rtp technology. Yes, that means a
channel in a native RTP bridge could move to another native RTP bridge and
be considered incompatible with the new native RTP bridge causing it to
revert to a simple bridge technology0. This fixes that bug by ignoring
framehooks that have been marked for destruction when checking for
compatibility with the bridge_native_rtp technology.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a Stasis message type is defined in a loadable module, handling
those messages for AMI and res_stasis events can be cumbersome.
This patch adds a vtable to stasis_message_type, with to_ami and
to_json virtual functions. These allow messages to be handled
abstractly without putting module-specific code in core.
As an example, the VarSet AMI event was refactored to use the to_ami
virtual function.
(closes issue ASTERISK-21817)
Review: https://reviewboard.asterisk.org/r/2579/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JSON objects are reference stealing. Hence, if you've RAII_VAR'd some
subobject and want to pack it into another JSON object, you have to bump
the reference count. Using the 'O' option during the pack will bump the
reference count for you.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People who use the features.conf.sample file from Asterisk 11 and before in trunk were
given a rude awakening when features configuration changes were made. Because it uses the
config framework and the config framework is strict about what is accepted and what isn't,
people that had parking options configured found that Asterisk no longer started. This is
because parking options are currently handled in res_parking.conf instead of features.conf.
This fix seeks to create a temporary band-aid fix for the problem, but having parking options
from the general section be passed to a handler that will simply print that the option is no
longer supported. This will not cause Asterisk to exit.
The fix only applies to options in the general section. There are two main reasons for this:
1) The sample features.conf file only has parking options in the general section. There are no
configured parking lots. Therefore it's not quite as "urgent" to get the parking lot parsing
fixed.
2) The plan is to move parking configuration back from res_parking.conf to features.conf. When
that happens, the parking lots will also be addressed at that time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds support for Stasis applications to receive bridge-related
messages when the application shows interest in a given bridge.
To supplement this work and test it, this also adds support for the
following bridge-related Stasis-HTTP functionality:
* GET stasis/bridges
* GET stasis/bridges/{bridgeId}
* POST stasis/bridges
* DELETE stasis/bridges/{bridgeId}
* POST stasis/bridges/{bridgeId}/addChannel
* POST stasis/bridges/{bridgeId}/removeChannel
Review: https://reviewboard.asterisk.org/r/2572/
(closes issue ASTERISK-21711)
(closes issue ASTERISK-21621)
(closes issue ASTERISK-21622)
(closes issue ASTERISK-21623)
(closes issue ASTERISK-21624)
(closes issue ASTERISK-21625)
(closes issue ASTERISK-21626)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Topics need to be disposed of prior to the message types that are published
on them. This includes topic pools. This prevents an assertion from being
raised on shutdown.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391040 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves the initialization call behind the protection against
reloads. We don't want to re-add message router routes during
reloads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows astmm to access the backtrace generation code in Asterisk.
When memory is allocated, a backtrace is created and stored with the memory
region that tracks the allocation. If a memory corruption is detected, the
backtrace is printed to the astmm log. The backtrace will make use of the
BETTER_BACKTRACES build option if available.
As a result, this patch moves the backtrace generation code into its own file
and uses the non-wrapped versions of the C library memory allocation routines.
This allows the memory allocation code to safely use the backtrace generation
routines without infinitely recursing.
Review: https://reviewboard.asterisk.org/r/2567
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added a start technology callback that technologies can use to start
bridging operations. It is expected that native bridges will find this
useful.
* Factored out bridge_channel_complete_join().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A three party bridge uses the softmix bridging technology. This
technology has a dedicated thread used to perform the analog mixing. When
one of these parties leaves the bridge, the bridge technology is changed
from the softmix technology to a two-party mixing technology. Changing
technologies is done by removing channels from the old technology and
adding them to the new technology. Since the remaining channels do not
leave the bridge, the softmix mixing thread could continue to process all
channels in the bridge. If the bridge code is not able to start
destruction of the softmix technology before the softmix mixing thread
wakes up, a crash happens.
* Added a stop technology callback that technologies can use to request
any helper threads to stop in preparation for being destroyed.
(closes issue AST-1156)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis cache clear message payloads now consist of a stasis_message
representative of the message to be cleared from the cache. This allows
multiple parallel caches to coexist and be cleared properly by the same
cache clear message even when keyed on different fields.
This change fixes a bug where multiple cache clears could be posted for
channels. The cache clear is now produced in the destructor instead of
ast_hangup.
Additionally, dummy channels are no longer capable of producing channel
snapshots.
Review: https://reviewboard.asterisk.org/r/2596
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Change applicationmap and featuregroup to replace duplicate config items
rather than reject them.
* Remove some unneeded warning messages when getting the applicationmap
allows duplicates from DYNAMIC_FEATURES.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reading from a config file, it's important to reject duplicates. Otherwise,
featuregroups will have ambiguity when pointing to applicationmap items. However,
when constructing the channel's current applicationmap, we don't care about duplicate
names since it's the DTMF that identifies a feature, not the name.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix external attended transfer bridge move/swap method. One of the
transferrer channels was not kicked out of the bridge.
* Fix several off-nominal extended attended transfer paths. Mainly the
channels involved needed to be hung up or kicked out of the bridge.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_multi_channel_blob_get_channel function does not bump the refcount on
the channel snapshot that it returns. This is typical for Stasis message
payloads, since being immutable means that the object won't get unreffed out
from underneath you.
The manager code for chanspy was unreffing the snapshots it got out of the
multi-channel blob, which was one unref too many.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is used to make bridge hook removal more generic. This way,
depending on the circumstance, the appropriate bridge hooks may be
removed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When channels are added to an endpoint, the code originally posted a channel
snapshot to the endoint's topic directly. Turns out, this is a bad idea.
This causes the endpoint to see an inconsistent view of the channel, since it
will later receive in-flight messages with old channel snapshots.
This patch instead just publishes channel state immediately after setting up
the forward to the endpoint's topic. This gives the endpoints a consistent
view of the channel's state.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
(closes issue ASTERISK-21816)
Reported by: Brad Latus (snuffy)
Tested by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactor some channel blob publishing code to use
ast_channel_publish_blob now that it is available and fix a JSON
reference leak that was occurring during varset publishing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* DTMF attended and blind transfers have hold/unhold behavior restored.
* External attended and blind transfers unhold the transfered party when
the transfer is initiated.
* Made prohibit blind transferring a bridge marked as masquerade only.
(ConfBridge bridges)
* Made running an application or playing a file inside a bridge post the
hold/unhold messages if MOH is requested.
Review: https://reviewboard.asterisk.org/r/2574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses issues during immediate shutdowns, where modules
are not unloaded, but Asterisk atexit handlers are run.
In the typical case, this usually isn't a big deal. But the
introduction of the Stasis message bus makes it much more likely for
asynchronous activity to be happening off in some thread during
shutdown.
During an immediate shutdown, Asterisk skips unloading modules. But
while it is processing the atexit handlers, there is a window of time
where some of the core message types have been cleaned up, but the
message bus is still running. Specifically, it's still running
module subscriptions that might be using the core message types. If a
message is received by that subscription in that window, it will
attempt to use a message type that has been cleaned up.
To solve this problem, this patch introduces ast_register_cleanup().
This function operates identically to ast_register_atexit(), except
that cleanup calls are not invoked on an immediate shutdown. All of
the core message type and topic cleanup was moved from atexit handlers
to cleanup handlers.
This ensures that core type and topic cleanup only happens if the
modules that used them are first unloaded.
This patch also changes the ast_assert() when accessing a cleaned up
or uninitialized message type to an error log message. Message type
functions are actually NULL safe across the board, so the assert was a
bit heavy handed. Especially for anyone with DO_CRASH enabled.
Review: https://reviewboard.asterisk.org/r/2562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Check the returned bridged pointer for NULL to avoid a crash. It looks
like chan_agent is returning a NULL pointer when it probably should be
returning a pointer to the channel the Agent channel is pretending to be.
(closes issue ASTERISK-21793)
Reported by: Rodrigo P. Telles
Patches:
jira_asterisk_21793_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Rodrigo P. Telles
........
Merged revisions 390044 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 390047 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Caching topics will during initialization attempt to reference
their message type. The message type therefore has to be
initialized prior to the topic to prevent the dreaded assertion.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Initialize a Stasis-Core message type prior to initializing a caching topic.
The caching topic will attempt to use the message type.
* Don't attempt to publish Stasis-Core messages from remote console connections.
They aren't the main process; they shouldn't attempt to behave as it (they also
don't have the infrastructure to do so)
* Don't treat a JSON object as an ao2 object (whoops)
* In asterisk.c, ref bump the JSON even package that is distributed with the
event meta data. The callers assume that they own the reference, and the packing
routine steals references.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk shuts down and shuts down the loggin gsubsystem, any
messages currently in flight will not get logged. This patch prevents the
loop writing messages from breaking out prematurely, such that all of the
messages are logged.
(closes issue ASTERISK-21716)
Reported by: Corey Farrell
patches:
logger-process-all-messages.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 389676 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 389677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk REST interface.
This adds the /playback/{playbackId}/control resource, which may be
POSTed to to pause, unpause, reverse, forward or restart the media
playback.
Attempts to control a playback that is not currently playing will
either return a 404 Not Found (because the playback object no longer
exists) or a 409 Conflict (because the playback object is still in the
queue to be played).
This patch also adds skipms and offsetms parameters to the
/channels/{channelId}/play resource.
(closes issue ASTERISK-21587)
Review: https://reviewboard.asterisk.org/r/2559
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and GET /playback/{playbackId}.
This allows an external application to initiate playback of a sound on a
channel while the channel is in the Stasis application.
/play commands are issued asynchronously, and return immediately with
the URL of the associated /playback resource. Playback commands queue up,
playing in succession. The /playback resource shows the state of a
playback operation as enqueued, playing or complete. (Although the
operation will only be in the 'complete' state for a very short time,
since it is almost immediately freed up).
(closes issue ASTERISK-21283)
(closes issue ASTERISK-21586)
Review: https://reviewboard.asterisk.org/r/2531/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The caching topic (which refers to the message type) was created before the
message type. If the initial subscription message gets processed before
the type can be initialized, the assertion about using an uninitialized type
fires.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This may alleviate some of the CDR woes with originated channels, as CDRs
do like to know when a channel was originated. Eventually this will get
converted to be a channel flag, so its location is still good to know
post the great CDR shakeup of 2013.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
* It fixes a bug where the outbound channel's application/data set by the
dialing API/app_dial is not communicated until the channel is hung up.
If that happens, AMI would incorrectly send a NewExten event immediately
after a Hangup. This isn't really AMI's fault, as the dialing APIs never
communicated the 'helpful' app/data on the outbound channel until it was
hungup.
* It makes public sending a stasis message about a change in channel state.
This is useful enough that - for now at least - it should be public. If
operations on a channel go to being more coarse-grained, this function
could be made private again.
Review: https://reviewboard.asterisk.org/r/2548
Note that this problem was found and reported by Matt DiMeo.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If DEBUG_THREADS is enabled __ast_rwlock_destroy causes a segfault while trying
to access a possible NULL t->track object. A NULL check has been added before
trying to access the memory.
(closes issue ASTERISK-21724)
Reported by: Corey Farrell
Fixed by: Corey Farrell
Patches:
ast_rwlock_destroy-segv.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 388838 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 388839 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388840 65c4cc65-6c06-0410-ace0-fbb531ad65f3