When using IMAP voicemail with FreePBX, you will often get ERROR messages
complaining about not being able to find a mailbox. This is due to how FreePBX
handles voicemail mailboxes. Unfortunately, app_voicemail has to consider this
a configuration error, as in any other system it would be indicative of
someone misconfiguring their system.
Regardless, a misconfiguration is a WARNING, and not an ERROR. This patch
demotes the message so that system administrators can hopefully reduce some
of the noise in their log files.
Note that in the original patch this was made into a NOTICE, but that's a
too forgiving.
ASTERISK-24790 #close
Reported by: Graham Barnett
patches:
app_voicemail.c.patch_noise uploaded by Graham Barnett (License 6685)
........
Merged revisions 432098 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432099 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When interfacing with Microsoft Exchange, custom headers will be returned as
all lower case. Currently, the IMAP header code will fail to parse the returned
custom headers, as it will be performing a case sensitive comparison. This can
cause playback of messages to fail, as needed information - such as origtime -
will not be present.
This patch updates app_voicemail's header parsing code to perform a case
insensitive lookup for the requested custom headers. Since the headers are
specific to Asterisk, e.g., 'x-asterisk-vm-orig-time', and headers should be
unique in an IMAP message, this should cause no issues with other systems.
ASTERISK-24787 #close
Reported by: Graham Barnett
patches:
app_voicemail.c.patch_MSExchange uploaded by Graham Barnett (License 6685)
........
Merged revisions 432012 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432013 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Test Event for MIXMONITOR_END - which signals that a MixMonitor has
completed - technically fired before the filestream was closed. If a test
used this to trigger a condition to verify that the file was written, it
could result in a race condition where the file size would not be what the
test expected.
Luckily, no tests were using this (although they should have been). Since the
test event needed to be moved after the point where the MixMonitor autochan has
been destroyed, the test event no longer emits the channel name. Luckily,
nothing needs it.
........
Merged revisions 431788 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 431789 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
........
Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the app_agent_pool module initially loads there is a race condition
between the thread loading agents.conf and the device state internal
processing thread. If the device state internal processing thread handles
the agent creation state updates before the thread that loaded agents.conf
registers the device state provider callback then the cached agent state
is "Invalid". When a consumer module like app_queue asks for the agent state
it gets the cached "Invalid" state instead of the real state from the provider.
* Moved loading the agents.conf configuration to the last thing setup by
app_agent_pool in load_module(). Now the device state provider callback
is registered before the config is loaded so the agent creation state
updates are guaranteed to get the initial device state.
* Removed some now redundant config cleanup on error in load_config().
* Added lock protection when accessing the device state in
agent_pvt_devstate_get() and eliminated the RAII_VAR() usage.
ASTERISK-24737 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4390/
........
Merged revisions 431492 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When issuing a 'confbridge list XXXX' CLI command, the resulting output no
longer displays the menu associated with a ConfBridge participant.
The issue was caused by ASTERISK-22760. When that patch was done, it removed
the copying of the menu name associated with the user from the actual user
profile.
This patch fixes the issue by copying the menu name over to the user profile
when the menu hooks are applied to the user. Since that function now does a
little bit more than just apply the hooks, the name of the function has been
changed to cover the copying of the menu name over as well.
In addition, there is a disparity between the menu name length as it is stored
on the conf_menu structure and the confbridge_user structure; this patch makes
the lengths match so that a strcpy can be used.
Review: https://reviewboard.asterisk.org/r/4372/
ASTERISK-24723 #close
Reported by: Steve Pitts
........
Merged revisions 431134 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431136 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel names should be different from other channels in the system while
the channel exists.
* Use a sequence number for CBRec channels instead of a random number
because the same random number could be picked again for the next CBRec
channel.
........
Merged revisions 431052 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The MixMonitor m() option allows a recording to be pushed to a specific
voicemail mailbox. If the message is delivered to the mailbox's INBOX, however,
no MWI notification is currently raised.
This patch corrects the issue by properly calling notify_new_state from the
msg_create_from_file function. This will cause MWI to be triggered if the
message was placed in the mailbox's INBOX.
ASTERISK-24709 #close
Reported by: Gareth Palmer
patches:
app_voicemail-430919.patch uploaded by Gareth Palmer (License 5169)
........
Merged revisions 430920 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430921 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial application has some interesting options with the mid-call Macro (M)
and GoSub (U) options. If the MACRO_RESULT/GOSUB_RESULT returns specific
values, the Dial application will take some action upon the channels involved
in the dial operation (such as hanging up a particular party, etc.) The Dial
application ensures that a Stasis message is published in the event that
MACRO_RESULT/GOSUB_RESULT returns a value that kills the dial operation, so
that there is a corresponding DialEnd event published in AMI/ARI for the
DialBegin event that preceeded it.
A bug exists where that same DialEnd event will be published on Stasis even if
the value returned in MACRO_RESULT/GOSUB_RESULT is not one that the Dial
application cares about. This causes two DialEnd events to be published - one
with the MACRO_RESULT/GOSUB_RESULT and another with "ANSWERED" - which is all
sorts of wrong.
This patch fixes the bug by ensuring that we only publish a DialEnd message to
Stasis if the Dial application's mid-call Macro/GoSub returns something that
Dial cares about.
Review: https://reviewboard.asterisk.org/r/4336
ASTERISK-24682 #close
Reported by: Matt Jordan
........
Merged revisions 430842 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using ODBC or IMAP storage, temporary files created on the file system
must be disposed of using the DISPOSE macro. The DELETE macro will map to a
deletion function for the backend storage, but does not clean up any local
files created as a result of the operation.
When using voicemail with the operator and review options enabled, pressing
0 to enter the menu, followed by 1 to save the message, followed by any
other DTMF press to delete the message, will result in the temporary file
lingering on the file system.
This patch properly calls DISPOSE after the DELETE. This causes the local
file to be disposed of.
ASTERISK-24288 #close
Reported by: LEI FU
patches:
voicemail_odbc_review_fix.diff uploaded by LEI FU (License 6640)
........
Merged revisions 430795 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430796 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
v11: If a channel redirect to a macro exten of a macro that is active
happens, the redirect location doesn't get executed. Instead the original
macro location is restored and gets reexecuted.
v13: An additional effect happens if a parked call times out to an
extension in the macro that parked the call then the macro is reexecuted
instead of the expected park return location.
* Made not restore the macro calling location on an
AST_SOFTHANGUP_ASYNCGOTO.
* Increased the locked channel range when setting up the macro execution
environment to cover things that should be done while the channel is
locked.
* Removed unnecessary NULL tests before calling ast_free() in
_macro_exec().
ASTERISK-23850 #close
Reported by: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/4292/
........
Merged revisions 430564 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430565 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability to pass options and a command to MixMontor when
recording a conference using ConfBridge.
New options are -
* record_options: Options to MixMontor, eg: m(), W() etc.
* record_command: The command to execute when recording is over.
* record_file_timestamp: Append the start time to the file name.
These options can also be used with the CONFBRIDGE function, e.g.,
Set(CONFBRIDGE(bridge,record_command)=/path/to/command ^{MIXMONITOR_FILENAME}))
Review: https://reviewboard.asterisk.org/r/4023
ASTERISK-24351 #close
Reported by: Gareth Palmer
patches:
record_command-428838.patch uploaded by Gareth Palmer (License 5169)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The UW IMAP library is instrinsically not thread-safe, and relies upon higher
level applications to guarantee thread safety. For the most part, this is
provided by the vms object, which provides locking for individual streams.
Unfortunately, this is not sufficient for calls to mail_open which create the
IMAP stream. mail_open can, on some systems, call into a UW IMAP specific
function for determining the address of a system based on a hostname,
ip_nametoaddr.
In the ip6_unix implementation of this function, static variables are used
to hold parsing buffers. This can cause a crash if multiple threads attempt
to convert a hostname to an address at the same time. Locking on a single
mail stream is not sufficient to prevent simultaneous access to these static
variables.
In the IMAP library, this function can be called from the mail_open and
imap_status functions. As the imap_status function is not used by
app_voicemail, locking on access to mail_open is sufficient to prevent
any mangling of the buffers.
Review: https://reviewboard.asterisk.org/r/4188/
ASTERISK-24516 #close
Reported by: David Duncan Ross Palmer
Tested by: David Duncan Ross Palmer
patches:
ASTERISK-24516.diff uploaded by David Duncan Ross Palmer (License 6660)
........
Merged revisions 428863 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428864 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428865 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge dialplan function permission escalation via AMI and inappropriate
class authorization on the ConfbridgeStartRecord action. The CONFBRIDGE dialplan
function when executed from an external protocol (for instance AMI), could
result in a privilege escalation. Also, the AMI action “ConfbridgeStartRecord”
could also be used to execute arbitrary system commands without first checking
for system access. The AMI “ConfbridgeStopRecord” has also been updated to
only run under a system authorization.
Asterisk now inhibits the CONFBRIDGE function from being executed from an
external interface if the live_dangerously option is set to no. Also, the
“ConfbridgeStartRecord” AMI action is now only allowed to execute under a
user with system level access.
ASTERISK-24490
Reported by: Gareth Palmer
........
Merged revisions 428332 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428334 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428339 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r428077 was made for ASTERISK-24522, it failed to take into account users
who are neither wait_marked nor end_marked. These users are *also* supposed to
hear the 'leader has left the conference' message. Granted, this behaviour is
a bit odd; however, that is how it used to work... and behaviour changes are
not good.
This patch ensures that if there are any 'normal' users present when the last
marked user leaves the conference, the message will still be played to them.
Note that this regression was caught by the Asterisk Test Suite's
confbridge_nominal test, which has a quirky combination of users.
........
Merged revisions 428113 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428114 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428115 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consider the following:
- A marked user in a conference
- One or more end_marked only users in the conference
When the marked users leaves, we will be in the conf_state_multi_marked state.
This currently will traverse the users, kicking out any who have the end_marked
flags. When they are kicked, a full ast_bridge_remove is immediately called on
the channels. At this time, we also unilaterally set the need_prompt flag.
When the need_prompt flag is set, we then playback a sound to the bridge
informing everyone that the leader has left; however, no one is left in the
bridge. This causes some odd behaviour for the end_marked users - they are
stuck waiting for the bridge to be unlocked. This results in them waiting for
5 or 6 seconds of dead air before hearing that they've been kicked.
Unfortunately, we do have to keep the bridge locked while we're playing back
the 'leader-has-left' prompt. If there are any wait_marked users in the
conference, this behaviour can't be easily changed - but we do make the case
of the end_marked users better with this patch.
Review: https://reviewboard.asterisk.org/r/4184/
ASTERISK-24522 #close
Reported by: Matt Jordan
........
Merged revisions 428077 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428078 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428079 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An issue existed in r420577, which added multiple recipients to voicemail
emails. The patch, when looking at the intended recipients, looked ahead for
the '|' character inside a while loop which already had pulled out the
appropriate field parsing on the '|' character. This would cause it to skip
the recipients.
This patch fixes it such that it relies completely on the while loop to parse
through the e-mail fields.
Note that the original author of the patch looked at this fix and approved it.
ASTERISK-24250 #close
Reported by: abelbeck
patches:
voicemail-420577-to-comma-fix.diff uploaded by abelbeck (License 5903)
........
Merged revisions 427585 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Made agent able to interrupt the alerting beep playback with DTMF. Any
digit can interrupt if the call does not need to be acknowledged. Only
the first digit of the acknowledgement can interrupt if the call needs to
be acknowledged. The agent interrupting the alerting playback builds on
the ASTERISK-24447 patch because it knows what digit interrupted the
playback and needs to be able to pass that digit to the DTMF hook digit
collection code.
ASTERISK-24257 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4123/
........
Merged revisions 427508 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427512 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides the capability to manipulate templates and categories
with non-unique names via AMI.
Summary of changes:
GetConfig and GetConfigJSON: Added "Filter" parameter: A comma separated list
of name_regex=value_regex expressions which will cause only categories whose
variables match all expressions to be considered. The special variable name
TEMPLATES can be used to control whether templates are included. Passing
'include' as the value will include templates along with normal categories.
Passing 'restrict' as the value will restrict the operation to ONLY templates.
Not specifying a TEMPLATES expression results in the current default behavior
which is to not include templates.
UpdateConfig: NewCat now includes options for allowing duplicate category
names, indicating if the category should be created as a template, and
specifying templates the category should inherit from. The rest of the
actions now accept a filter string as defined above. If there are non-unique
category names, you can now update specific ones based on variable values.
To facilitate the new capabilities in manager, corresponding changes had to be
made to config, most notably the addition of filter criteria to many of the
APIs. In some cases it was easy to change the references to use the new
prototype but others would have required touching too many files for this
patch so a wrapper with the original prototype was created. Macros couldn't
be used in this case because it would break binary compatibility with modules
such as res_digium_phone that are linked to real symbols.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4033/
........
Merged revisions 425383 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425384 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding a mixmonitor to a channel causes the bridge to change technologies
from native to simple_bridge so the call can be recorded. However, when
the mixmonitor is stopped the bridge does not switch back to the native
technology.
* Added unbridge requests to reevaluate the bridge when a channel
audiohook is removed.
* Moved the unbridge request into ast_audiohook_attach() ensure that the
bridge reevaluates whenever an audiohook is attached. This simplified the
mixmonitor and chan_spy start code as well.
* Added defensive code to stop_mixmonitor_full() in case additional
arguments are ever added to the StopMixMonitor application.
* Made ast_framehook_detach() not do an unbridge request if the framehook
does not exist.
* Made ast_framehook_list_fixup() do an unbridge request if there are any
framehooks. Also simplified the loop.
ASTERISK-24195 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4046/
........
Merged revisions 424506 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424507 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The QUEUE_GET_CHANNEL function returns the caller's channel name at the
specified position in a queue.
QUEUE_GET_CHANNEL(<queuename>[,<position>])
The queue position parameter defaults to 1 if not specified.
Noop(${QUEUE_GET_CHANNEL(queuename, 2)})
"SIP/peer-00000002", if queue exist and have at least 2 callers
Noop(${QUEUE_GET_CHANNEL(queuename, 1)})
Noop(${QUEUE_GET_CHANNEL(queuename)})
"SIP/peer-00000000", if queue exist and have at least 1 caller
ASTERISK-24365 #close
Reported by: Kristian Hogh
Patches:
queue_get_firstchannel.patch (license #6639) patch uploaded by Kristian Hogh
rb4035.patch (license #6639) patch uploaded by Kristian Hogh
Patch morphed from QUEUE_GET_FIRSTCHANEL to the more general QUEUE_GET_CHANNEL
on reviewbord.
Review: https://reviewboard.asterisk.org/r/4035/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This gets rid of most old libc free/malloc/realloc and replaces them
with ast_free and friends. When compiling with MALLOC_DEBUG you'll
notice it when you're mistakenly using one of the libc variants. For
the legacy cases you can define WRAP_LIBC_MALLOC before including
asterisk.h.
Even better would be if the errors were also enabled when compiling
without MALLOC_DEBUG, but that's a slightly more invasive header
file change.
Those compiling addons/format_mp3 will need to rerun
./contrib/scripts/get_mp3_source.sh.
ASTERISK-24348 #related
Review: https://reviewboard.asterisk.org/r/4015/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes made during format improvements resulted in the
recording to voicemail option 'm' of the MixMonitor app
writing a zero length duration in the msgXXXX.txt file.
This change introduces a new function ast_ratestream(),
which provides the sample rate of the format associated
with the stream, and updates the app_voicemail function
for ast_app_copy_recording_to_vm to calculate the right
duration.
Review: https://reviewboard.asterisk.org/r/3996/
ASTERISK-24328 #close
........
Merged revisions 423192 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The context/extension in a CDR is generally considered the destination of a
call. When looking at a 2-party call CDR, users will typically be presented
with the following:
context exten channel dest_channel app data
default 1000 SIP/8675309 SIP/1000 Dial SIP/1000,,20
However, if the Dial actually takes place in a Macro, the current behaviour
in 12 will result in the following CDR:
context exten channel dest_channel app data
macro-dial s SIP/8675309 SIP/1000 Dial SIP/1000,,20
The same is true of a GoSub:
context exten channel dest_channel app data
subs dial_stuff SIP/8675309 SIP/1000 Dial SIP/1000,,20
This generally makes the context/exten fields less than useful.
It isn't hard to preserve these values in the CDR state machine; however, we
need to have something that informs us when a channel is executing a
subroutine. Prior to this patch, there isn't anything that does this.
This patch solves this problem by adding a new channel flag,
AST_FLAG_SUBROUTINE_EXEC. This flag is set on a channel when it executes a
Macro or a GoSub. The CDR engine looks for this value when updating a Party A
snapshot; if the flag is present, we don't override the context/exten on the
main CDR object. In a funny quirk, executing a hangup handler must *not* abide
by this logic, as the endbeforehexten logic assumes that the user wants to see
data that occurs in hangup logic, which includes those subroutines. Since
those execute outside of a typical Dial operation (and will typically have
their own dedicated CDR anyway), this is unlikely to cause any heartburn.
Review: https://reviewboard.asterisk.org/r/3962/
ASTERISK-24254 #close
Reported by: tm1000, Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 422718 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422719 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Review: https://reviewboard.asterisk.org/r/3899
........
Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The same function, meetme_stasis_generate_msg, handles creating and publishing
Stasis message both when there are channels in the MeetMe conference and when
there are no channels in the conference. When the performance improvement was
made to use cached snapshots, this created a situation where Asterisk would
crash: obtaining a cached snapshot is not NULL tolerant.
This patch restores the previous implementation, which used a NULL safe set
of routines to produce a blob containing the channel snapshot (if available)
and information about the MeetMe conference.
ASTERISK-24234 #close
Reported by: Shaun Ruffell
Tested by: Shaun Ruffell
........
Merged revisions 421270 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421273 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a manager or CLI user attached a mixmonitor to a call running a dynamic
bridge feature while in a bridge, the feature would be interrupted and the
channel would be forcibly kicked out of the bridge (usually ending the call
during a simple 1 to 1 call). This would also occur during any similar action
that could set the unbridge soft hangup flag, so the fix for this was to
remove unbridge from the soft hangup flags and make it a separate thing all
together.
ASTERISK-24027 #close
Reported by: mjordan
Review: https://reviewboard.asterisk.org/r/3900/
........
Merged revisions 420934 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 420940 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
For example:
rule_name, time, min_penalty, max_penalty
'default', '10', '20', '30'
'test2', '20', '30', '55'
'test2', '25', '-11', '+1111'
'test2', '400', '112', '333'
'test3', '0', '4564', '46546'
'test_rule', '40', '15', '50'
which would result in :
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
........
Merged revisions 420624 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges created by app_bridgewait previously had the "dissolve when empty" flag set.
This caused the bridge core to destroy them when the last channel had left. This
introduced a race condition where we may have a reference to the bridge but it is
not actually joinable when we try to join it. This flag has now been removed and the
bridge is guaranteed to be joinable at all times.
ASTERISK-23987 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3836/
........
Merged revisions 419538 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have a new periodic beep feature but sometimes a user needs some sort of
feedback, without the need to have a periodic beep during the recording, to let
them know that MixMonitor started recording or ended the recording. The use
case where this patch is being used is when using Dynamic Features to start and
end MixMonitor.
This patch adds an option to play a beep when MixMonitor starts and an option to
play a beep when MixMonitor ends.
ASTERISK-24051 #close
Reported by: Michael L. Young
patches:
mixmonitor-play-beep-start-stop.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3820/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for the Japanese language to both the say family of
applications, as well as for VoiceMail and VoiceMailMain. A new pack of
language sounds will be released at the same time as the next major version
of Asterisk to support the new language features.
The language features can be enabled using a language code of 'ja'.
Review: https://reviewboard.asterisk.org/r/3477
ASTERISK-23324 #close
Reported by: Kevin McCoy
patches:
app_voicemail.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)
say.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch enables the jack-audiohook to cope with dynamic sampling rates from
and to Asterisk. Information from the channel is taken to derive the channel's
sampling rate, suiting SLINxx format and frame->datalen.
There are stil a few limitations after this patch:
* Required information is taken from the channel during initialization as
the audiohook does not provide this information.
Audiohook.internal_sampl_rate(...) is set later, but no callback is available
to inform app_jack.
* Frame.datalen is computed using "rate / 50" assuming a ptime of 20ms.
There is no internal API available to determine datalen for a SLINxx.
* Ringbuffer size is now dynamic depending on the value of frame.datalen
(see above) and the number of frames, which are in RINGBUFFER_FRAME_CAPACITY,
that need to fit.
Review: https://reviewboard.asterisk.org/r/3618
Note that the patch being committed here is based on the patch posted on
ASTERISK-23836. However, Matthis Schmieder also provided a patch to enable
this functionality, and that patch is noted below.
ASTERISK-20696 #close
Reported by: Matthis Schmieder
patches:
app_jack.patch uploaded by Matthis Schmieder (License 6445)
ASTERISK-23836 #close
Reported by: Dennis Guse
patches:
patch-app_jack.c uploaded by Dennis Guse (License 6513)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Extract the sayname API call to its own registerd callback. This allows
the app_directory and app_chanspy applications to say a mailbox owner's
name using an alternate provider when app_voicemail is not available
because you are using res_mwi_external. app_directory still uses the
voicemail.conf file.
AFS-64 #close
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some performance testing of Asterisk with AGI, ARI, and lots of Local
channels, we noticed that there's quite a hit in performance during channel
creation and releasing to the dialplan (ARI continue). After investigating
the performance spike that occurs during channel creation, we discovered
that we create a lot of channel snapshots that are technically unnecessary.
This includes creating snapshots during:
* AGI execution
* Returning objects for ARI commands
* During some Local channel operations
* During some dialling operations
* During variable setting
* During some bridging operations
And more.
This patch does the following:
- It removes a number of fields from channel snapshots. These fields were
rarely used, were expensive to have on the snapshot, and hurt performance.
This included formats, translation paths, Log Call ID, callgroup, pickup
group, and all channel variables. As a result, AMI Status,
"core show channel", "core show channelvar", and "pjsip show channel" were
modified to either hit the live channel or not show certain pieces of data.
While this is unfortunate, the performance gain from this patch is worth
the loss in behaviour.
- It adds a mechanism to publish a cached snapshot + blob. A large number of
publications were changed to use this, including:
- During Dial begin
- During Variable assignment (if no AMI variables are emitted - if AMI
variables are set, we have to make snapshots when a variable is changed)
- During channel pickup
- When a channel is put on hold/unhold
- When a DTMF digit is begun/ended
- When creating a bridge snapshot
- When an AOC event is raised
- During Local channel optimization/Local bridging
- When endpoint snapshots are generated
- All AGI events
- All ARI responses that return a channel
- Events in the AgentPool, MeetMe, and some in Queue
- Additionally, some extraneous channel snapshots were being made that were
unnecessary. These were removed.
- The result of ast_hashtab_hash_string is now cached in stasis_cache. This
reduces a large number of calls to ast_hashtab_hash_string, which reduced
the amount of time spent in this function in gprof by around 50%.
#ASTERISK-23811 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3568/
........
Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In app_queue, device state changes arrive in event messages and
update the queue member status value. That value is checked in
get_member_status() to decide that the caller should leave when
there are no available members. Although event messages can be
delayed by other activity, there is no adverse affect by lagged
status except in one specific case: there is only one available
member, it was just rung, and leavewhenempty is enabled set for
ringing members. This change adds a direct check of the device
state only under this condition where the caller may be dropped
incorrectly, resolving this issue without affecting performance
of app_queue normally.
AST-1248 #close
Review: https://reviewboard.asterisk.org/r/3595/
Reported by: Thomas Arimont
........
Merged revisions 415833 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415835 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415836 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MixMonitor AMI commands StartMixMonitor and StopMixMonitor lacked class
authorization. StopMixMonitor now requires that the manager user either have
the call or system class authorization. StartMixMonitor is a slightly larger
issue since it can execute shell commands if the right arguments are passed
into it, and we consider this a permission escalation. A security release
will be issued for problem this shortly.
ASTERISK-23609 #close
Reported by: Corey Farrell
........
Merged revisions 415825 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415832 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, users waiting to enter a ConfBridge were not considered
when muted via the CLI or via AMI. Instead, a confusing message would be
emitted stating that the channel did not exist.
This patch allows a user to be muted when waiting to enter a ConfBridge
conference. This is equivalent to start when muted, only toggled via the CLI
or AMI.
Review: https://reviewboard.asterisk.org/r/3582
#ASTERISK-23824 #close
patches:
rb3582.patch uploaded by tm1000 (License 6524)
........
Merged revisions 415206 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415207 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Conference names were not checked for maximum length, allowing unexpected
behaviour. This change adds checking to ensure the maximum length is not
exceeded. The maximum length is also changed from 32 to AST_MAX_EXTENSION.
ASTERISK-23035 #close
Reported by: Iñaki Cívico
Tested by: Iñaki Cívico
Patches:
confbridge-enforce_max-1.8.patch uploaded by coreyfarrell (license 5909)
confbridge-enforce_max-11up.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 415060 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415066 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415078 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses some aesthetic issues in Asterisk. These are all just
minor tweaks to improve the look of the CLI when used in a variety of
settings. Specifically:
* A number of chatty verbose messages were removed or demoted to DEBUG
messages. Verbose messages with a verbosity level of 5 or higher were -
if kept as verbose messages - demoted to level 4. Several messages
that were emitted at verbose level 3 were demoted to 4, as announcement
of dialplan applications being executed occur at level 3 (and so the
effects of those applications should generally be less).
* Some verbose messages that only appear when their respective 'debug'
options are enabled were bumped up to always be displayed.
* Prefix/timestamping of verbose messages were moved to the verboser
handlers. This was done to prevent duplication of prefixes when the
timestamp option (-T) is used with the CLI.
* Verbose magic is removed from messages before being emitted to
non-verboser handlers. This prevents the magic in multi-line verbose
messages (such as SIP debug traces or the output of DumpChan) from
being written to files.
* _Slightly_ better support for the "light background" option (-W) was
added. This includes using ast_term_quit in the output of XML
documentation help, as well as changing the "Asterisk Ready" prompt to
bright green on the default background (which stands a better chance of
being displayed properly than bright white).
Review: https://reviewboard.asterisk.org/r/3547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Improvements to the agent pool functionality.
* AgentRequest no longer hangs up the caller if the agent fails to connect
with the caller. It now continues in the dialplan.
* AgentRequest returns AGENT_STATUS set to NOT_CONNECTED if the agent
failed to connect with the call. Most likely because the agent did not
acknowledge the call in time or got disconnected.
* The agent alerting play file configured by the agent.conf custom_beep
option can now be disabled by setting the option to an empty string. The
agent is effectively alerted to a call presence when MOH stops.
* Fixed bridge reference leak when the agent connects with a caller.
ASTERISK-23499 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3551/
........
Merged revisions 414747 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, when the last marked user leaves the conference, waitmarked
users don't get MOH if MOH is supposed to be played while a waitmarked
user is waiting for another marked user.
* Made not interrupt MOH when the user is a waitmarked user. The
waitmarked user doesn't need to hear any leave announcements from the
conference as the user would have already heard different leave
announcements if they were enabled. Apparently DAHDI occasionally sends
unending non-silent streams to these users or a normal user still in the
conference has continuous high background noise. These non-silent streams
cause MOH to be suspended while the never ending "announcement" is played.
Issue caused by ASTERISK-13680.
AST-1349 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3543/
........
Merged revisions 414401 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414402 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 414404 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
User events can now be generated from ARI. Events can be signalled with
arbitrary json variables, and include one or more of channel, bridge, or
endpoint snapshots. An application must be specified which will receive
the event message (other applications can subscribe to it). The message
will also be delivered via AMI provided a channel is attached. Dialplan
generated user event messages are still transmitted via the channel, and
will only be received by a stasis application they are attached to or if
the channel is subscribed to.
This change also introduces the multi object blob mechanism used to send
multiple snapshot types in a single message. The dialplan app UserEvent
was also changed to use multi object blob, and a new stasis message type
created to handle them.
ASTERISK-22697 #close
Review: https://reviewboard.asterisk.org/r/3494/
........
Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting a conference recording using the admin menu overwrites the DAHDI
conference data structure used to modify the admin user's conference mute
mode.
* Made no longer pass the user's DAHDI conference data structure into the
menu functions. The menu now uses its own DAHDI conference data
structure to start the recording channel.
* Moved the unlock conf->playlock to before playing the conf-full message.
No sense keeping the lock while that prompt is playing. The user is never
going to get into the conference at that point.
........
Merged revisions 413991 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413992 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413993 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixed a ref leak in conf_handle_talker_cb() everytime the conference
bridge was found to report a channel's talker status change. The
resulting leak caused the "CBAnn" channels and the conference bridge to
never be destroyed.
Thanks to Richard Kenner on the asterisk-user's list for locating the
problem.
Reported by: Richard Kenner
........
Merged revisions 413454 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413455 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the ability to kick all attendees from a conference was added, a
rework removed the comment about that feature from the CLI
documentation. This adds that documentation and adds "all" to the
participant tab completion list for the confbridge kick command.
(closes issue ASTERISK-23282)
Reported by: Dorian Logan
........
Merged revisions 412728 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two issues in app_sms:
(1) Firstly, the 'flags' field on the stack in sms_exec() is uninitialised,
causing it to use the wrong protocol in some cases. This patch correctly
initializes the flags fields.
(2) Secondly, when disconnect supervision is not working or
inbanddisconnect=yes is set in chan_dahdi.conf, app_sms was failing to
terminate the call after it sent the REL(ease) message and the peer stopped
talking to it. This patch fixes the code to handle the 'bad stop bit'
message more gracefully in that case, and hang up the call.
Review: https://reviewboard.asterisk.org/r/1392/
ASTERISK-18331 #close
Reported by: David Woodhouse
patches:
asterisk-fix-sms.patch uploaded by David Woodhouse (License 5754)
........
Merged revisions 412655 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412656 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412657 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Restore the reason value set by pbx_outgoing_attempt() to use
AST_CONTROL_xxx values as all the consumers were expecting rather than
cause codes.
* Fixed the dial routines to set cause codes for more than just
ast_request() so pbx_outgoing_attempt() reason codes will function.
* Fix inconsistent locked_channel return status in pbx_outgoing_attempt().
The chanel may not have been locked or the channel may have been a stale
pointer.
* Fixed the OutgoingSpoolFailed channel to run dialplan whenever the
dialing fails for an originate exten and 1 < synchronous.
* Fix incorrect ast_cond_wait() usage in pbx_outgoing_attempt().
Indroduced by issue ASTERISK-22212 patch.
* Made struct pbx_outgoing use the ao2 lock instead of its own lock for
the cond wait mutex. No sense in having two locks associated with the
same struct when only one is needed.
Review: https://reviewboard.asterisk.org/r/3421/
........
Merged revisions 412581 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed ast_channel_publish_dial_forward() not locking the forwarded
channel when taking the channel snapshot.
* Fixed app_dial.c:do_forward() using the wrong channel to get the
original call forwarding string.
* Removed unnecessary locking when calling ast_channel_publish_dial() and
ast_channel_publish_dial_forward() in app_dial and app_queue. Holding
channel locks when calling ast_channel_publish_dial_forward() with a
forwarded channel could result in pausing the system while the stasis bus
completes processsing a forwarded channel subscription.
Review: https://reviewboard.asterisk.org/r/3451/
........
Merged revisions 412579 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add an option to enable a periodic beep to be played into a call if it
is being recorded. If enabled, it uses the PERIODIC_HOOK() function
internally to play the 'beep' prompt into the call at a specified
interval. This option is provided for both Monitor() and
MixMonitor().
Review: https://reviewboard.asterisk.org/r/3424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a parsing error that occurred during the processing of
the AMI action. The error did not result in MixMonitor itself
misbehaving, but it could result in the AMI response not giving
correct information back.
The new header allows for one to specify a post-process command
to run when recording finishes. Previously, in order to do this,
the post-process command would have to be placed at the end of
the Options: header.
Patches: mixmonitor_command_2.patch by jhardin (License #6512)
........
Merged revisions 412048 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed off-nominal json ref counting issue with using the following API
calls: ast_json_object_set() and ast_json_array_append().
* Fixed off-nominal error reporting in ast_ari_endpoints_list().
* Fixed some miscellaneous off-nominal json ref counting issues in
report_receive_fax_status() and dial_to_json().
........
Merged revisions 408713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the "x" option (specify a DTMF digit to exit the application), it is
not obvious in the documentation that this only works when spying on a channel.
If a channel being used to spy on other channels is waiting to connect to a
channel or is no longer attached to a channel, the DTMF is ignored.
As noted on the issue tracker, since there are workarounds available and this is
a rarely used option we are opting for a documentation change here.
(closes issue ASTERISK-22661)
Reported by: Chris Hillman
Patches:
asterisk-22661-doc-clarify-chan_spy.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2990/
........
Merged revisions 408536 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 408537 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 408538 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when the first marked user enters the conference that
contains waitmarked users, a prompt is played indicating that the user
is being placed into the conference. Unfortunately, this prompt is
played to the marked user and not the waitmarked users which is not
very helpful.
This patch changes that behavior to play a prompt stating
"The conference will now begin" to the entire conference after adding
and unmuting the waitmarked users since the design of confbridge is not
conducive to playing a prompt to a subset of users in a conference in
an asynchronous manner.
(closes issue PQ-1396)
Review: https://reviewboard.asterisk.org/r/3155/
Reported by: Steve Pitts
........
Merged revisions 407857 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 407858 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a number of small-ish problems that were noticed when
witnessing the records that the FreePBX dialplan produces:
(1) Mid-call events (as well as privacy options) have the ability to change the
overall state of the Dial operation after the called party answers. This
means that publishing the DialEnd event when the called party is premature;
we have to wait for the execution of these subroutines to complete before
we can signal the overall status of the DialEnd. This patch moves that
publication and adds handlers for the mid-call events.
(2) The AST_FLAG_OUTGOING channel flag is cleared if an after bridge goto
datastore is detected. This flag was preventing CDRs from being recorded
for all outbound channels that had a 'continue' option enabled on them by
the Dial application.
(3) The CDR engine now locks the 'Dial' application as being the CDR
application if it detects that the current CDR has entered that app. This
is similar to the logic that is done for Parking. In general, if we entered
into Dial, then we want that CDR to record the application as such - this
prevents pre-dial handlers, mid-call handlers, and other shenaniganry
from changing the application value.
(4) The CDR engine now checks for the AST_SOFTHANGUP_HANGUP_EXEC in more places
to determine if the channel is in hangup logic or dead. In either case, we
don't want to record changes in the channel.
(5) The default option for "endbeforehexten" has been changed to "yes". In
general, you don't want to see CDRs in the 'h' exten or in hangup logic.
Since the semantics of that option changed in 12, it made sense to update
the default value as well.
(6) Finally, because we now have the ability to synchronize on the messages
published to the CDR topic, on shutdown the CDR engine will now synchronize
to the messages currently in flight. This helps to ensure that all
in-flight CDRs are written before shutting down.
(closes issue ASTERISK-23164)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3154
........
Merged revisions 407084 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405792 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405829 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In https://reviewboard.asterisk.org/r/3057/, applications and functions that
manipulate CDRs were made to interact over Stasis. This was done to
synchronize manipulations of CDRs from the dialplan with the updates the
engine itself receives over the message bus.
This change rested on a faulty premise: that messages published to the CDR
topic or to a topic that forwards to the CDR topic are synchronized with the
messages handled by the CDR topic subscription in the CDR engine. This is not
the case. There is no ordering guaranteed for two messages published to the
same topic; ordering is only guaranteed if a message is published to the same
subscriber.
Stasis was modified in r405311 to allow a publisher to synchronize on the
subscriber. This patch uses that API to synchronize the CDR publishers with
the CDR engine message router, which maintains the overall topic subscription.
(closes issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405312 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When waitmarked users join a ConfBridge, the conference state is transitioned
from EMPTY -> INACTIVE. In this state, the users are maintined in a waiting
users list. When a marked user joins, the ConfBridge conference transitions
from INACTIVE -> MULTI_MARKED, and all users are put onto the active list of
users. This process works correctly.
When the marked user leaves, if they are the last marked user, the MULTI_MARKED
state does the following:
(1) It plays back a message to the bridge stating that the leader has left the
conference. This requires an unlocking of the bridge.
(2) It moves waitmarked users back to the waiting list
(3) It transitions to the appropriate state: in this case, INACTIVE
However, because it plays the prompt back to the bridge before moving the users
and before finishing the state transition, this creates a race condition: with
the bridge unlocked, waitmarked users who leave the conference (or are kicked
from it) can cause a state transition of the bridge to another state before
the conference is transitioned to the INACTIVE state. This causes the state
machine to get a bit wonky, often leading to a crash when the MULTI_MARKED state
attempts to conclude its processing.
This patch fixes this problem:
(1) It prevents kicked users from being kicked again. That's just a nicety.
(2) More importantly, it fixes the race condition by only playing the prompt
once the state has transitioned correctly to INACTIVE. If waitmarked users
sneak out during the prompt being played, no harm no foul.
Review: https://reviewboard.asterisk.org/r/3108/
Note that the patch committed here is essentially the same as uploaded by
Simon Moxon on ASTERISK-22740, with the addition of the double kick prevention.
(closes issue AST-1258)
Reported by: Steve Pitts
(closes issue ASTERISK-22740)
Reported by: Simon Moxon
patches:
ASTERISK-22740.diff uploaded by Simon Moxon (license 6546)
........
Merged revisions 405215 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405216 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The core external MWI resource provides for MWI message counts
persistence using sorcery. With sorcery, the user is able to configure
which sorcery wizzard backend to use if the default astdb is not desired.
* The core external MWI resoruce provides some debugging CLI commands
enabled by defining MWI_DEBUG_CLI.
The debugging CLI commands are:
"mwi delete all",
"mwi delete like <regex>",
"mwi delete mailbox <mailbox>",
"mwi list all",
"mwi list like <regex>",
"mwi show mailbox <mailbox>", and
"mwi update mailbox <mailbox> [<new> [<old>]]".
(closes issue AFS-43)
Review: https://reviewboard.asterisk.org/r/3061/
........
Merged revisions 404952 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When doing the rework of the CDR engine that pushed all of the logic into cdr.c
and made it respond to changes in channel state over Stasis, we knew that
accessing the CDR engine from the dialplan would be "slightly"
non-deterministic. Dialplan threads would be accessing CDRs while Stasis
threads would be updating the state of said CDRs - whereas in the past,
everything happened on the dialplan threads. Tests have shown that "slightly"
is in reality "very".
This patch synchronizes things by making the dialplan applications/functions
that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and
CDR_PROP now all use Stasis to send their requests over to the CDR engine,
and synchronize on the channel Stasis topic via a subscription so that they
return their values/control to the dialplan at the appropriate time.
While going through this, the following changes were also made:
* DISA, which can reset the CDR when a user successfully authenticates, now
just uses the ResetCDR app to do this. This prevents having to duplicate
the same Stasis synchronization logic in that application.
* Answer no longer disables CDRs. It actually didn't work anyway - calling
DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer
time - it just kills all CDRs on that channel, which isn't what the caller
would intend.
(closes issue ASTERISK-22884)
(closes issue ASTERISK-22886)
Review: https://reviewboard.asterisk.org/r/3057/
........
Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch prevents an infinite loop overwriting memory when
a message is received into the unpacksms16() function, where
the length of the message is an odd number of bytes.
(closes issue ASTERISK-22590)
Reported by: Jan Juergens
Tested by: Jan Juergens
........
Merged revisions 403856 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The voicemail registration/unregistration functions now take a struct of
callbacks instead of a lengthy parameter list of callbacks.
* The voicemail registration/unregistration functions now prevent a
competing module from interfering with an already registered callback
supplying module.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the time, this is only useful for retrieving the filename.
The purpose of this function is to better facilitate multiple
mixmonitors per channel. Setting a MIXMONITOR_FILENAME channel
variable is not conducive to such behavior, so allowing finer
grained access to individual mixmonitor properties improves
the situation. The MIXMONITOR_FILENAME channel variable is still
set, though, so there is no worry about backwards compatibility.
Review: https://reviewboard.asterisk.org/r/3023
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403512 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the last release of sounds, 1.4.25 we added a vm-msgforwarded prompt for various core languages. Now we use that prompt.
(issue ASTERISK-21413)
(closes issue ASTERISK-21413)
Reported by: netwrkr
Tested by: newtonr
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made PickupChan() search by channel uniqueids if the search could not
find a channel by name.
* Ensured PickupChan() never considers the picking channel for pickup.
* Made PickupChan() option p use a common search by name routine. The
original search was erroneously case sensitive.
(issue AFS-42)
Review: https://reviewboard.asterisk.org/r/3017/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
By the time the directory application exits, a channel variable
DIRECTORY_RESULT will be set for the channel that invoked it which
can be used to determine the reason for exit. The changes log and
the app_directory documentation contain specific details about
each of the possible values for DIRECTORY_RESULT.
Review: https://reviewboard.asterisk.org/r/3016/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made Pickup() and PickupChan() tollerate empty pickup values. i.e., You
can now have Pickup(&&exten@context).
* Made PickupChan() use the standard option flag parsing code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Similar to how background works, if a say application is called with
this variable set to 'true', 'yes', 'on', etc. then using DTMF while
the say action is in progress will result in the channel jumping to
that extension in the dialplan.
Review: https://reviewboard.asterisk.org/r/3011/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several places in the code were using wait4 while other places were using
waitpid. This change makes all places use waitpid in order to make things
more consistent and since the 'rusage' object passed in/out of wait4 was
never used.
(closes issue ASTERISK-22557)
Reported by: YvesGael
Patches:
asterisk-11.5.1-wait4.patch uploaded by hurdman (license 6537)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the first agent/member (via CLI "queue show") in a queue is "busy" (dnd,
circuit busy, etc...) and no agents answered then app_queue would crash.
This occurred because while the calling of agent(s) remained valid the channel
on "busy" agent would be set to NULL and then later dereferenced upon a second
"rna" function call. The original intention of the code is to have only valid
"call attempt" objects (channels != NULL) checked while attempting to call
agent(s). It does this by building a "call_next" list of valid "call attempt"
objects. In the case of the "busy" agent subsequent builds of the valid "call
attempt" list would sometimes include (the case mentioned above) an invalid
"call attempt" object.
The fix was to make sure the "call attempt" list was appropriately built on
every iteration. A NULL sanity check was also added at the original offending
spot of the crash just in case another one slipped by somehow.
(closes issue ASTERISK-22644)
Reported by: Marco Signorini
Review: https://reviewboard.asterisk.org/r/2983/
........
Merged revisions 402517 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The system overrides the user muting requests when MOH is playing or a
waitmarked user is waiting for a marked user to join. System muting
overrides interfere with what the user may wish the muting to be when the
system override ends.
* User muting requests are now independent of the system muting overrides.
The effective muting is now the logical or of the user request and system
override.
* Added a Muted flag to the CLI "confbridge list <conference>" command.
* Added a Muted header to the AMI ConfbridgeList action ConfbridgeList
event.
(closes issue AST-1102)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2960/
........
Merged revisions 402425 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402427 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge allows custom DTMF menus to be created in the confbridge.conf
file by assigning a DTMF key sequence to a sequence of actions as follows:
DTMF-sequence = action,action...
Unfortunately, the normal config file processing code interprets an
initial '#' character as starting a directive such as #include.
* Add the ability to escape the first non-blank character in a config line
so the '#' character can be used without triggering the directive
processing code.
(closes issue AFS-2)
(closes issue ASTERISK-22478)
Reported by: Nicolas Tanski
Patches:
jira_asterisk_22478_v11.patch (license #5621) patch uploaded by rmudgett (modified)
Review: https://reviewboard.asterisk.org/r/2969/
........
Merged revisions 402407 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402416 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also adds the ability to clear all profile items and makes behavior more
consistent with documentation as when choosing whether to use CONFBRIDGE
datastore profiles or the application arguments to the confbridge application.
(closes issue ASTERISK-22760)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2971/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The queue_log entry resulting from CLI "queue remove member" when
log_membername_as_agent is enabled is wrong. It always uses the interface
name instead of the member name in the queue_log entry.
* Get the queue member before removing it from the queue so the member
name is available for the queue_log entry.
(closes issue ASTERISK-21826)
Reported by: Oscar Esteve
Patches:
fix_membername.diff (license #6505) patch uploaded by Oscar Esteve
(modified to fix potential ref leak)
........
Merged revisions 401433 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401434 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most callers of ast_channel_make_compatible() happen before the channels
enter a two party bridge. With the new bridging framework, two party
bridging technologies may also call ast_channel_make_compatible() when
there is more than one thread involved with the two channels.
* Added channel lock protection in set_format() and
ast_channel_make_compatible_helper() when dealing with the channel's
native formats while setting up a translation path.
* Fixed best_src_fmt and best_dst_fmt usage consistency in
ast_channel_make_compatible_helper(). The call to
ast_translator_best_choice() got them backwards.
* Updated some callers of ast_channel_make_compatible() and the function
documentation. There is actually a difference between the two channels
passed in.
* Fixed the deadlock potential in res_fax.c dealing with
ast_channel_make_compatible(). The deadlock potential was already there
anyway because res_fax called ast_channel_make_compatible() with chan
locked.
(closes issue ASTERISK-22542)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2915/
........
Merged revisions 401239 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge now has the ability to set the language of announcements to the
conference. The language can be set on a bridge profile in
confbridge.conf or by the dialplan function
CONFBRIDGE(bridge,language)=en.
(closes issue ASTERISK-19983)
Reported by: Jonathan White
Patches:
M19983_rev2.diff (license #5138) patch uploaded by junky (modified)
Tested by: rmudgett
........
Merged revisions 400741 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400742 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The https://reviewboard.asterisk.org/r/2888/ review changes manager to not
subscribe to stasis when it is disabled for performance reasons. When
manager is disabled app_queue and res_agi decline to load and fail to
clean up what they have already allocated.
* Made app_queue and res_agi clean up allocated resources when they
decline to load.
* Made app_queue and res_agi use their own subscriptions to the stasis
topics instead of borrowing manager's message router structure
inappropriately.
(closes issue ASTERISK-22604)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/2902/
........
Merged revisions 400671 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Commit r62462 added two extra fields for logging "the original position the
caller entered the queue at, and the amount of time the caller was waiting in
the queue." But when r75969 was merged from 1.4 into trunk (r75977), these two
fields disappeared. Those two extra fields were not logged in 1.4 and when the
patch was merged, those fields went away.
Therefore, this is a regression and was caught by the reporter because he was
reading the awesome "Asterisk: The Definitive Guide" book.
(closes issue ASTERISK-22197)
Reported by: Dalius M.
Tested by: Dalius M.
Patches:
asterisk-22197-q-log-exitwithkey.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2901/
........
Merged revisions 400622 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400623 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400624 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* There were several places in ARI where an external library was mallocing
memory that must always be released with free(). When MALLOC_DEBUG is
enabled, free() is redirected to the MALLOC_DEBUG version. Since the
external library call still uses the normal malloc(), MALLOC_DEBUG
complains that the freed memory block is not registered and will not free
it. These cases must use ast_std_free().
* Changed calls to asprintf() and vasprintf() to the equivalent
ast_asprintf() and ast_vasprintf() versions respectively.
........
Merged revisions 400270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_queue currently attempts to handle Local channel optimizations in an effort
to provide accurate information in Stasis messages (and their corresponding
AMI events) as well as the Queue log. Sometimes, however, things don't go as
planned.
Consider the following scenario:
SIP/foo <-> L;1 <-> L;2 <-> SIP/agent
SIP/agent answers, triggering a Local channel optimization. app_queue will
normally do the following:
* Listen for the Local optimization events and update our agent accordingly
to SIP/agent in the queue log and messages
* When we get a hangup, publish the AgentComplete event based on our
information (SIP/foo and SIP/agent)
However, as with all things that depend on sanity from something as capricious
as Local channels, things can go wrong:
(1) SIP/agent immediately hangs up upon answering. This triggers a race
condition between termination messages coming from SIP/agent and the
ongoing Local channel optimization messages. (Note that this can also
occur with SIP/foo)
(2) In a race condition, Asterisk can (rarely) deliver the hangup messages
prior to the Local channel optimization.
In that case, the messages *may* arrive to app_queue in the following order:
* Hangup SIP/Agent
* Hangup SIP/foo
* Optimize L;1/L;2
* Hangup L;2
* Hangup L;1
When app_queue receives the hangup of the agent or the caller, it will attempt
to publish the AgentComplete event. However, it now has a problem - it thinks
its agent is the ;1 side of the Local channel, as it never received the
optimization event. At the same time, that channel is already gone. This
results in getting NULL from the Stasis cache. What's more, we can't really
wait for the optimization message, as we are currently handling the hangup
of the channel that the optimization event would tell us to use.
This patch modifies the behavior in app_queue such that, since we still have a
lot of pertinent queue information (interface, queue name, etc.), we now raise
the event with what information we know. The channels involved now may or may
not be present. Users will still at least get the "AgentComplete" event, which
"completes" the known Agent information.
Review: https://reviewboard.asterisk.org/r/2878/
(closes issue ASTERISK-22507)
Reported by: Richard Mudgett
........
Merged revisions 400060 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the channel variable MONITOR_EXEC is set, app_queue will pass the specified
execution parameters to the MixMonitor application when a queue is recorded.
If that channel variable is not set, the buffer that holds the escaped value
was not being initialized to NULL, and so would be passed to the MixMonitor
application with garbage. Hilarity ensued as app_mixmonitor attempted to
execute gobeldy-gook.
........
Merged revisions 399681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge would not properly tear down an empty conference bridge when all
users were kicked via end_marked=yes and at least one user was also set to
wait_marked. This occurred because while end_marked users were being kicked
and at least one was also set to wait_marked then the leave wait_marked handler
would be called on that user, but there would be no waiting user (still
considered active). The waiting users would decrement and now be negative. The
conference would remain, but be put into an inactive state. The solution was
to move from the active list to the wait list, those users with wait_marked set
right before kicking. This allows both the active and wait users to decrement
correctly and the confbridge to tear down properly.
A crashed also occurred when trying to list the specific conference from the CLI.
This happened because the conference specified was invalid. Since the
conference properly tears down now there is no way to reference it thus
alleviating the crash as well.
(closes issue ASTERISK-21859)
Reported by: Chris Gentle
Review: https://reviewboard.asterisk.org/r/2848/
........
Merged revisions 399222 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399225 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes regression introduced by -r374096.
* Made res_speech.export.in export ast_* symbols instead of specific
functions.
* Made app_speech_utils.c declare that it is dependent upon res_speech.
(issue ASTERISK-17136)
Reported by: Richard Kenner
........
Merged revisions 399197 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactored cases where a combination of ast_verbose/options_verbose were
present. Also in general tried to eliminate, in as many places as possible,
where the options_verbose global variable was being used. Refactored the way
local and remote consoles handle verbose message logging in an attempt to
solve the various discrepancies that sometimes would show between the two.
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2798/
........
Merged revisions 397948 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r397921 | mmichelson | 2013-08-29 10:42:10 -0500 (Thu, 29 Aug 2013) | 6 lines
Resolve assumptions that bridge snapshots would be non-NULL for transfer stasis events.
Attempting to transfer an unbridged call would result in crashes in either CEL code or
in the conversion to AMI messages.
........
r397922 | mmichelson | 2013-08-29 10:42:29 -0500 (Thu, 29 Aug 2013) | 3 lines
Remove extra debug message.
........
Merged revisions 397921-397922 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new dialplan application, SayAlphaCase, that performs much
the same function as SayAlpha except that it takes additional options
which allow the user to specify whether the case of each letter should
be announced for uppercase, lowercase, or all letters. Similar
functionality has been added to the SAY ALPHA AGI command via an
optional parameter.
Original Patch by: Kevin Scott Adams
Reported by: Kevin Scott Adams
Review: https://reviewboard.asterisk.org/r/2725/
(closes issue ASTERISK-20782)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Queue members who happen to be in multiple queues at the same time may not
have any wrap up time. This problem occurred due to a code change in Asterisk
11.3.0 that unified device state tracking of Queue members in multiple
Queues (which fixed some other problems, but unfortunately caused this one).
This patch fixes the behavior by having the is_member_available function
check the queue's wrap up time and the time of the member's last call, such
that for a particular queue, the member won't be considered available if their
last call is within the wrap up time.
(closes issue ASTERISK-22189)
Reported by: Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 396948 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r382230 added an option to not denoise the MeetMe conference (if a user
had a channel whose format's sample rate changed frequently, for example),
the value added was the maximum allowed value for the constants that define
the options for MeetMe in 1.8. Not so in 11 - unfortunately, the option
CONFFLAG_DONT_DENOISE conflicts with CONFFLAG_INTROUESR_VMREC. This patch
fixes that, and also tweaks one of the way in which the constants was
declared for consistency.
Thanks to Tony Mountifield for pointing out the problem and solution.
(closes issue ASTERISK-22269)
Reported by: Tony Mountifield
........
Merged revisions 396944 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The feature_attended_transfer test is failing due to Asterisk not
passing DTMF in the bridges created for internal attended transfers.
This sets the features initialization routine to set this flag by
default and adjusts the basic bridge and confbridge's use of the
bridging system accordingly as per Richard's suggestion instead of
adjusting this individual case. This change allows the necessary DTMF
to pass through the attended transfer bridge and complete the test
successfully.
Review: https://reviewboard.asterisk.org/r/2759/
(closes issue ASTERISK-22222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Holding bridges can allow local channel move/swap optimization to the
bridge. However, we cannot allow it for the BridgeWait holding bridge
because the call will lose the channel roles and dialplan location as a
result.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396695 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Changed ast_manager_build_bridge_state_string() to assume an empty
prefix string just like ast_manager_build_channel_state_string().
* Created ast_manager_build_bridge_state_string_prefix() to work just like
ast_manager_build_channel_state_string_prefix().
* Made BridgeMerge AMI event use To/From prefixes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does three things:
1. It provides a Surrogate channel technology with a consolidated
"implementation detail flag" on the channel technology. This tells
consumers of Stasis that the creation of this channel is an implementation
detail in Asterisk and can be ignored (if they so choose). This
consolidates the conference recorder/announcer flags as well - these flags
had no additional meaning beyond "ignore this channel please".
2. It modifies allocation of a channel in two ways:
(a) If a channel technology can be determined from the name, we set it
directly in the allocation routine. This prevents the initial
publication of the message from going out with a NULL channel technology
where possible. This lets Stasis consumers get the right channel
technology on the first publication.
(b) It reorganizes allocation to make use of the 'finalized' property on the
channel. This was already used to know that a channel had completely
finished its construction in the masquerade routine; now we also use it
to know whether or not the setting of certain channel properties is
occurring during or post construction. The various set routines were
modified accordingly as well.
3. The masquerade event is now dead, Jim. It no longer served any purpose
whatsoever - if you perform a call pickup you'll get a Pickup event;
if you perform an attended transfer you will still get those events; if you
steal a channel to put it elsewhere you'll get the corresponding NewExten or
BridgeEnter events.
Review: https://reviewboard.asterisk.org/r/2740
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The rna() routine will raise a Stasis message involving both the caller and the
agent. This doesn't work so well if we already hung up the agent channel, as
the channel doesn't quite exist. Not surprisingly, this will crash. This patch
properly runs the rna subroutine (performing all of the Ring-No-Answer logic)
prior to hanging up the agent channel.
(closes issue ASTERISK-22258)
Reported by: Kiril Valchev
Tested by: Kiril Valchev
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability in Queue to raise a hint when a member's paused
state changes. The hint uses the form 'Queue:{queue_name}_pause_{member_name}',
where {queue_name} and {member_name} are the name of the queue and the name
of the member to subscribe to, respectively.
For example: exten => 8501,hint,Queue:sales_pause_mark.
Members will show as In Use when paused.
Note that the format of the queue pause hint was changed slightly from what
is on the issue to accomodate suggestion on the code review.
Review: https://reviewboard.asterisk.org/r/2254
(closes issue ASTERISK-20842)
Reported by: Philippe Lindheimer
patches:
qpause-10-378206.diff uploaded by Philippe Lindheimer (license 5519)
qpause-11-378206.diff uploaded by Philippe Lindheimer (license 5519)
qpause-trunk-378206.diff uploaded by Philippe Lindheimer (license 5519)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed feature limits to not use special members of struct
ast_bridge_features.
* Fixed memory leak in off nominal paths of bridge_builtin_set_limits().
* Fixed off nominal path in ast_bridge_features_limits_construct() freeing
unallocated memory if it was not called by bridge_builtin_set_limits().
* Made bridge_builtin_interval_features.so unloadable.
* Simplified parking's use of its duration interval hook.
* Made BridgeWait S option not depend upon another module being loaded.
(closes issue ASTERISK-22107)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2701/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes arguments for BridgeWait from BridgeWait(role, options) to
BridgeWait(bridge_name, role, options). Now multiple holding bridges may
be created and referenced by this application.
(closes issue ASTERISK-21922)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2642/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Reduced the number of hook containers to just dtmf_hooks,
interval_hooks, and other_hooks. As a result, several functions dealing
with the different hook containers could be combined.
* Extended the generic hook struct for DTMF and interval hooks instead of
using a variant record.
* Merged the special talk detector hook into the other_hooks container.
* Replaced ast_bridge_features_set_talk_detector() with
ast_bridge_talk_detector_hook().
(issue ASTERISK-22107)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It pulls out bridge_channel and puts it into its own translation unit
* It adds public and protected headers for bridging_channel. Protected
functions are appropriate only for the Bridging API and sub-classes of a
bridge.
(issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds new flags to the channel tech properties that flag it as
different types of implementation detail used exclusively to provide a
feature. Examples of channels that would have these flags include the
announcement and recording channels used by confbridge which are the
only two marked as such by this patch.
Review: https://reviewboard.asterisk.org/r/2633/
(closes issue ASTERISK-21873)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds more entertainment options to holding bridges and the
bridge_wait application. Also, holding bridges will now use music on
hold as the default entertainment option instead of none. The
parameters for app_bridgewait have changed to (role, options) from
the previous (options) and the options themselves have changed as
well (entertainment options are now contained in an enumerator, role
specification is handled by the role parameter, etc)
(closes issue ASTERISK-21923)
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/2679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since ast_hangup() is effectively a channel destructor, it should be a
void function.
* Make the few silly callers checking the return value no longer do so.
Only the CDR and CEL unit tests checked the return value.
* Make all callers take advantage of the NULL safe change and remove the
NULL check before the call.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability to kick all users out of a conference from the
ConfBridge kick CLI command. It is invoked by passing 'all' as the channel
parameter to the CLI command, i.e., "confbridge kick <conf> all".
Note that this patch was modified slightly to conform to trunk.
(closes issue ASTERISK-21827)
Reported by: dorianlogan
patches:
kickall-patch_v2.diff uploaded by dorianlogan (License 6504)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ill conceived chan_agent is no more. It is now replaced by
app_agent_pool.
Agents login using the AgentLogin() application as before. The
AgentLogin() application no longer does any authentication.
Authentication is now the responsibility of the dialplan. (Besides, the
authentication done by chan_agent did not match what the voice prompts
asked for.)
Sample extensions.conf
[login]
; Sample agent 1001 login
; Set COLP for in between calls so the agent does not see the last caller COLP.
exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>)
; Give the agent DTMF transfer and disconnect features when connected to a caller.
same => n,Set(CHANNEL(dtmf-features)=TX)
same => n,AgentLogin(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
[caller]
; Sample caller direct connect to agent 1001
exten => 800,1,AgentRequest(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
; Sample caller going through a Queue to agent 1001
exten => 900,1,Queue(agent_q)
same => n,Hangup()
Sample queues.conf
[agent_q]
member => Local/800@caller,,SuperAgent,Agent:1001
Under the hood operation overview:
1) Logged in agents wait for callers in an agents holding bridge.
2) Caller requests an agent using AgentRequest()
3) A basic bridge is created, the agent is notified, and caller joins the
basic bridge to wait for the agent.
4) The agent is either automatically connected to the caller or must ack
the call to connect.
5) The agent is moved from the agents holding bridge to the basic bridge.
6) The agent and caller talk.
7) The connection is ended by either party.
8) The agent goes back to the agents holding bridge.
To avoid some locking issues with the agent holding bridge, I needed to
make some changes to the after bridge callback support. The after bridge
callback is now a list of requested callbacks with the last to be added
the only active callback. The after bridge callback for failed callbacks
will always happen in the channel thread when the channel leaves the
bridging system or is destroyed.
(closes issue ASTERISK-21554)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When QUEUE_MEMBER is used and the member specified is not in the queue,
Asterisk provides an ERROR message that indicates that the option specified
is not valid. This patch now properly displays an ERROR message that the
member is not in the queue if an interface is specified.
(closes issue ASTERISK-21980)
Reported by: Avraam David
........
Merged revisions 394345 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SLA code within app_meetme was written before asotbj2 had been
merged into Asterisk. Worse, support for reloads did not exist at first
and was added later as a bolt-on feature. I knew at the time that
reloading was not safe at all while SLA was in use, so the reload would
be queued up to execute when the system was idle. Unfortunately, this
approach was still prone to errors beyond the fact that this was the
only place in Asterisk where configuration was not reloaded
instantly when requested.
This patch converts various SLA objects to be reference counted objects
using astobj2. This allows reloads to be processed while the system is
in use. The code ensures that the objects will not disappear while one
of the other threads is using them. However, they will be immediately
removed from the global trunk and station containers so no new calls
will use them if removed from configuration.
Review: https://reviewboard.asterisk.org/r/2581/
........
Merged revisions 393928 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 393929 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the first step in adding recording support to the
Asterisk REST Interface.
Recordings are stored in /var/spool/recording. Since recordings may be
destructive (overwriting existing files), the API rejects attempts to
escape the recording directory (avoiding issues if someone attempts to
record to ../../lib/sounds/greeting, for example).
(closes issue ASTERISK-21594)
(closes issue ASTERISK-21581)
Review: https://reviewboard.asterisk.org/r/2612/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The option had not been converted to use the replacement for
ast_bridged_channel(). One touch mixmonitor now records files again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In addition to porting those features, they now enjoy greater feature parity
with one another. Specifically, AutoMixMon now has a start and stop
message that can be specified with TOUCH_MIXMONITOR_MESSAGE_START and
TOUCH_MIXMONITOR_MESSAGE_STOP.
(closes issue ASTERISK-21553)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2620/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a misunderstanding about ast_bridge_impart()'s handling of the
imparted channel's reference. The channel reference is passed by the
caller unless ast_bridge_impart() returns an error.
* Fixed a memory leak in conf_announce_channel_push() if the impart
failed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes AST_CEL_BRIDGE_UPDATE since it should no longer be
used because masquerade situations are now accounted for in other ways.
This also refactors usage of AST_CEL_FORWARD to be produced by a Dial
message which has been extended with a "forward" field.
(closes issue ASTERISK-21566)
Review: https://reviewboard.asterisk.org/r/2635/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The menuselect parser is very simple. It looks for AST_MODULE_INFO and
uses any quoted string on that line as the module summary display.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r386792, the ability to play prompts to the first caller in a call queue was
added. While this is arguably a bug fix for those who expect the first caller
to continue receiving prompts while the agent is dialed, it has the side effect
of preventing the first caller from hearing the agent immediately upon
bridging. This may not be a problem for those who really want this option, but
for those who didn't care whether or not the first caller in queue heard their
position, it was an issue.
This patch disables the ability for the first caller in the queue to hear
prompts and adds a new option, announce-to-first-user, to queues.conf. Those
who the behavior can enable it by setting this value to True.
Note that if we ever implement the ability to have the prompts be stopped
upon bridging, this option can be removed.
(closes issue ASTERISK-21782)
Reported by: Remi Quezada
........
Merged revisions 391215 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391241 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactor some channel blob publishing code to use
ast_channel_publish_blob now that it is available and fix a JSON
reference leak that was occurring during varset publishing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New in 12 are the ConfBridgeMute/Unmute events, which are triggered when a user
changes their mute/unmute state. This was typically triggered when a user hit a
DTMF key that triggered the mute/unmute menu handler. Forgotten in this is when an
AMI action or CLI command triggers the mute/unmute. This patch now raises the
events in those situations as well.
(closes issue ASTERISK-21802)
Reported by: Birger "WIMPy" Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389402 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When this option was added, it was noted in CHANGES, but was missing
the XML documentation that this patch adds.
(closes issue ASTERISK-21780)
Patch-by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
* It fixes a bug where the outbound channel's application/data set by the
dialing API/app_dial is not communicated until the channel is hung up.
If that happens, AMI would incorrectly send a NewExten event immediately
after a Hangup. This isn't really AMI's fault, as the dialing APIs never
communicated the 'helpful' app/data on the outbound channel until it was
hungup.
* It makes public sending a stasis message about a change in channel state.
This is useful enough that - for now at least - it should be public. If
operations on a channel go to being more coarse-grained, this function
could be made private again.
Review: https://reviewboard.asterisk.org/r/2548
Note that this problem was found and reported by Matt DiMeo.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The snapshot API contains an option that allow for combining of new
and old messages within a single snapshot. New messages, however,
include options beyond just 'INBOX' - it also includes the Urgent
folder. A previous patch that combined INBOX and Urgent accidentally
impacted snapshots that attempted to gain messages from just the Old
folder. This patch fixes the snapshot gathering such that the API
returns the appropriate messages for the folder selected, with and
without the combine option.
This should make it more clear about what's happening.
Review: https://reviewboard.asterisk.org/r/2539/
........
Merged revisions 388816 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When implementing playback for stasis-http, the monolithicedness of
res_stasis really started to get in my way.
This patch breaks the major components of res_stasis.c into individual
files.
* res/stasis/app.c - Stasis application tracking
* res/stasis/control.c - Channel control objects
* res/stasis/command.c - Channel command object
This refactoring also allows res_stasis applications to be loaded as
independent modules, such as the new res_stasis_answer module.
The bulk of this patch is simply moving code from one file to another,
adjusting names and adding accessors as necessary.
Review: https://reviewboard.asterisk.org/r/2530/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I've noticed when doing a graceful shutdown that the res_stasis_http.so
module gets unloaded before the modules that use it, which causes some
asserts during their unload.
While r386928 was a quick hack to get it to not assert and die, this
patch increases the use counts on res_stasis.so and res_stasis_http.so
properly. It's a bigger change than I expected, hence the review instead
of just committing it.
Review: https://reviewboard.asterisk.org/r/2489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a framework in res_stasis for handling events from
channel topics. JSON event generation and validation code is created
from event documentation in rest-api/api-docs/events.json to assist in
JSON event generation, ensure consistency, and ensure that accurate
documentation is available for ALL events that are received by
res_stasis applications.
The userevent application has been refactored along with the code that
handles userevent channel blob events to pass the headers as key/value
pairs in the JSON blob. As a side-effect, app_userevent now handles
duplicate keys by overwriting the previous value.
Review: https://reviewboard.asterisk.org/r/2428/
(closes issue ASTERISK-21180)
Patch-By: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the "ignorebusy" setting was deprecated, we added some code to allow us to
be compatible with older setups that are still using the "ignorebusy" setting
instead of "ringinuse". We set a char *variable with the column name to use,
which helps the realtime functions to use the correct column in their SQL
queries. When "persistentmembers" is enabled, we are not setting this variable
before the realtime functions were called to load members. This results in the
variable being NULL and therefore causing a segfault when loading members during
the module's process of loading.
The solution was to move the code that sets that variable to be before these
realtime functions are called during the loading of the module.
(closes issue ASTERISK-21738)
Reported by: JoshE
Tested by: JoshE
Patches:
asterisk-21738-rt-ringinuse-field-not-set.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2499/
........
Merged revisions 388108 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, a call to ast_load_realtime_multientry could get away with
passing a NULL parameter to the function, even though it really isn't
supposed to do that. After the change over to using ast_variable instead
of variadic arguments, the realtime engine gets unhappy if you do this.
This was always an unintended function call in app_directory anyway - now,
we just don't call into the realtime function calls if we don't have anything
to query on.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we first introduced the channel blob types, the JSON blobs were
self identifying by a required "type" field in the JSON object
itself. This, as it turns out, was a bad idea.
When we introduced the message router, it was useless for routing based
on the JSON type. And messages had two type fields to check: the
stasis_message_type() of the message itself, plus the type field in the
JSON blob (but only if it was a blob message).
This patch corrects that mistake by removing the required type field
from JSON blobs, and introducing first class stasis_message_type objects
for the actual message type.
Since we now will have a proliferation of message types, I introduced a
few macros to help reduce the amount of boilerplate necessary to set
them up.
Review: https://reviewboard.asterisk.org/r/2509
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reload support was originally not included for SLA. It was added later,
but in a fairly non-traditional way. It basically sets a flag
indicating that a reload is pending, and then waits for a time where it
thinks everything SLA related is idle and unused, and *then* executes
the reload. It does this because the reload process is destructive. It
starts by throwing everything away and starting over.
There are a number of problems with this approach. One of them is that
the check to see if anything in use was incomplete. This patch makes it
more complete and thus less likely for a crash to occur during reload
processing. However, this approach still has problems so some much more
significant reworking of this code will need to come in as a next step.
Patch credit and testing by CoreDial, LLC.
........
Merged revisions 387688 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387689 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves VarSet events for local variables raised by GoSub
over to Stasis-Core. It also tweaks up the post-processing documentation
scripts to not combine parameters if both parameters are already documented.
(issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make confbridge config parsing user profile, bridge profile, and menu
container hash/cmp functions correctly check the OBJ_POINTER, OBJ_KEY, and
OBJ_PARTIAL_KEY flags.
* Made confbridge load_module()/unload_module() free all resources on
failure conditions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sla.lock was already locked in the only place that sla_check_reload() was called.
Remove the redundant locking of sla.lock done in this function. Less recursive
locking is A Good Thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the move from Asterisk's event system to Stasis, this makes
distributed device state aggregation always-on, removes unnecessary
task processors where possible, and collapses aggregate and
non-aggregate states into a single cache for ease of retrieval. This
also removes an intermediary step in device state aggregation.
Review: https://reviewboard.asterisk.org/r/2389/
(closes issue ASTERISK-21101)
Patch-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After some discussion on asterisk-dev, it was decided that the bulk of
the logic in app_stasis actually belongs in a resource module instead
of the application module.
This patch does that, leaves the app specific stuff in app_stasis, and
fixes up everything else to be consistent with that change.
* Renamed test_app_stasis to test_res_stasis
* Renamed app_stasis.h to stasis_app.h
* This is still stasis application support, even though it's no
longer in an app_ module. The name should never have been tied to
the type of module, anyways.
* Now that json isn't a resource module anymore, moved the
ast_channel_snapshot_to_json function to main/stasis_channels.c,
where it makes more sense.
Review: https://reviewboard.asterisk.org/r/2430/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
refactored to use these events rather than producing the events directly
in channel.c. Finally, the code was added to app_stasis to produce
DTMF events on the WebSocket.
The AMI events are completely backward compatible, including sending
events on transmitted DTMF, and sending DTMF start events.
The Stasis-HTTP events are somewhat simplified. Since DTMF start and
DTMF send events are generally less useful, Stasis-HTTP will only send
events on received DTMF end.
(closes issue ASTERISK-21282)
(closes issue ASTERISK-21359)
Review: https://reviewboard.asterisk.org/r/2439
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report was that app_voicemail would crash. This was caused by
ast_config_load() returning CONFIG_STATUS_FILEINVALID but no checks being
performed for that return status. After adding the initial patch to fix this
issue, Jaco Kroon (jkroon) added some fixes to memory leaks he had discovered.
During review, Walter Doekes (wdoekes) suggested adding a helper function in
order to determine if we had a valid configuration or not.
This patch does the following:
* Creates a helper function to check if the configuration is valid
* Adds calls to the new helper function where appropiate
* Fixes memory leaks where the code returned without running
ast_config_destroy() on the configuration that was loaded
(closes issue ASTERISK-21302)
Reported by: Jaco Kroon
Tested by: Jaco Kroon, Michael L. Young
Patches:
asterisk-11.3.0-app_voicemail-ast_config-fixes.patch
Jaco Kroon (license 5671)
asterisk-21302-valid_cfg_and_mem_leaks_v3-1.8.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2443/
........
Merged revisions 385551 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385557 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The hash and compare functions for the control container was reusing
the wrong ones, causing some problems. I fixed it, but in the wrong
branch. Oh well, it happens.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* A new Stasis payload has been defined for multi-channel messages. This
payload can store multiple ast_channel_snapshot objects along with a single
JSON blob. The payload object itself is opaque; the snapshots are stored
in a container keyed by roles. APIs have been provided to query for and
retrieve the snapshots from the payload object.
* The Dial AMI events have been refactored onto Stasis. This includes dial
messages in app_dial, as well as the core dialing framework. The AMI events
have been modified to send out a DialBegin/DialEnd events, as opposed to
the subevent type that was previously used.
* Stasis messages, types, and other objects related to channels have been
placed in their own file, stasis_channels. Unit tests for some of these
objects/messages have also been written.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the API that binds the Stasis dialplan application to external
Stasis applications. It also adds the beginnings of WebSocket
application support.
This module registers a dialplan function named Stasis, which is used
to put a channel into the named Stasis app. As a channel enters and
leaves the Stasis diaplan application, the Stasis app receives a
'stasis-start' and 'stasis-end' events.
Stasis apps register themselves using the stasis_app_register and
stasis_app_unregister functions. Messages are sent to an application
using stasis_app_send.
Finally, Stasis apps control channels through the use of the
stasis_app_control object, and the family of stasis_app_control_*
functions.
Other changes along for the ride are:
* An ast_frame_dtor function that's RAII_VAR safe
* Some common JSON encoders for name/number, timeval, and
context/extension/priority
Review: https://reviewboard.asterisk.org/r/2361/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch migrates the TestEvent AMI events to first be dispatched over the
Stasis-Core message bus. This helps to preserve the ordering of the events
with other events in the AMI system, such as the various channel related
events.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
At least one call to run_externnotify provides a NULL context parameter and
because the snprintf statement doesn't account for a NULL context parameter,
it simply writes '(null)' to the arguments string instead. This patch makes
it write two quotes back to back for that argument instead in the event of
a NULL context.
(closes issue ASTERISK-18207)
Reported by: Barry L. Kline
Patches:
modified from patch-20130306 uploaded by Karsten Wemheuer (License 5930)
........
Merged revisions 384325 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 384326 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an SLA trunk is ringing (inbound call on the trunk) Asterisk will
make outbound calls to the stations that have that trunk. If more than
one station answers the call at the same time, all channels other than
the first one to answer are left in a bad state. The channel gets
leaked, is not connected to anything, and there's no way to get rid of
it.
We now properly clean up these losing channels by hanging up on them.
Since they lost the race, as we process their answer, there is no
ringing trunk for them to answer.
........
Merged revisions 383835 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383836 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was accidentally introduced when allowing an optional ID to be used
when calling StopMixMonitor. When we are unable to stop MixMonitor on a
channel, -1 is being returned which triggers the hangup of the channel.
This patch restores the prior behavior by returning 0 whether we were successful
or not. It also allows the call from the manager to use the return code when
the action fails.
(closes issue ASTERISK-21294)
Reported by: daroz
Tested by: daroz
Patches:
asterisk-21294-stop_mixmonitor_hangingup.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2404/
........
Merged revisions 383631 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started out simply as fixing the bouncing tests introduced
in r382685, but required some other changes to give it a decent
implementation.
To fix the bouncing tests, the UserEvent and Newexten AMI events
needed to be refactored to dispatch via Stasis. Dispatching directly
to AMI resulted in those events sometimes getting ahead of the
associated Newchannel events, which would understandably confuse anyone.
I found that instead of creating a zillion different message types and
structures associated with them, it would be preferable to define a
message type that has a channel snapshot and a blob of structured data
with a small bit of additional information. The JSON object model
provides a very nice way of representing structured data, so I went
with that.
* Move JSON support from res_json.c to main/json.c
* Made libjansson-dev a required dependency
* Added an ast_channel_blob message type, which has a channel
snapshot and JSON blob of data.
* Changed UserEvent and Newexten events so that they are dispatched
via ast_channel_blob messages on the channel's topic.
* Got rid of the ast_channel_varset message; used ast_channel_blob
instead.
* Extracted the manager functions converting Stasis channel events to
AMI events into manager_channel.c.
(issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r381835 fixed a bug in vm_mailbox_snapshot where combining INBOX and Old forgot
that Urgent also "counts" as new messages. This fixed the problem when any of
the three folders was specified and the combine option was used.
It missed the case where the folder isn't specified and we build a snapshot of
all folders. This patch corrects that.
........
Merged revisions 382617 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382621 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fix checks to make sure that if a confbridge record start command is issued
from the CLI it will always use the file name given on the CLI even if it
changes between start/stop records for a conference. Previously it had been
reusing the same file between start/stops even if a new filename was given.
(issue AST-1088)
Reported by: John Bigelow
........
Merged revisions 382385 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some channel drivers, specifically those that have a varying rate in the
number of audio samples, the audio quality for a MeetMe conference can be
exceedingly poor. This is due to a unilateral application of the DENOISE
function in func_speex to channels joining the conference.
The denoiser function in the speex library is initialized with the number of
audio samples in each sample that will be provided to it. If the number of
audio samples changes, the denoiser has to be thrown away and re-initialized.
While this could be worked around by removing func_speex, that doesn't help
if you actually use the denoiser with other channels on the system.
This patches does the following:
* Checks for the presence of func_speex as opposed to codec_speex when
determining if the DENOISE function is present (which is where the function
is actually implemented)
* Adds an option to MeetMe 'n' that causes the denoiser to not be applied
to a channel when it joins. This keeps the current behavior the default, but
let's users disable the denoiser if it causes problems on their system.
Review: https://reviewboard.asterisk.org/r/2358
(closes issue AST-1062)
Reported by: Thomas Arimont
........
Merged revisions 382227 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 382230 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ConfBridge was refactored to better handle the concept of marked,
wait_marked, and normal users co-existing in a conference (thereby implementing
a state machine for the conference), the wait_marked users were put into their
own list of conference participants, separate from the active users. This list
is used for wait_marked users when they are waiting in a conference but no
marked user has joined; normal users may have joined at this point however.
There are several AMI/CLI commands that affect conference users that were not
checking the wait_marked users list:
* CLI/AMI commands that mute/unmute a participant. In this case, wait_marked
users have to remain in their particular state and should not be affected -
however, the commands would return "Channel not found" as opposed to the
appropriate error condition.
* CLI/AMI commands that kick a participant. An admin should always be able to
kick a participant out of the conference.
This patch fixes both sets of commands, and cleans up the CLI commands slightly
by allowing them to complete a participant name (this was supposed to have been
added, but the function call was commented out and wasn't implemented).
Review: https://reviewboard.asterisk.org/r/2346/
(closes issue AST-1114)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382068 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge and Page require that there always be a default bridge and user
profile available. While properties of the default profiles can be overriden
in the configuration file, removing them can create situations where neither
application can function properly.
This patch ensures that if an administrator removes the profiles from the
confbridge.conf configuration file, the profiles are added upon load.
Documentation clarifying this has been added to the confbridge.conf.sample file.
Review: https://reviewboard.asterisk.org/r/2356/
(closes issue AST-1115)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382066 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ParkAndAnnounce application documentation for the optional return_context
parameter states the following:
return_context
The goto-style label to jump the call back into after timeout. Default
'priority+1'.
Unfortunately, the application was sending the channel back into the dialplan
at 'priority', which is the ParkAndAnnounce application call. This causes an
infinite loop of the channel constantly being parked, announced, timed out,
parked, announced, timed out... while fun, especially for those callers you
wish to drive to the end of madness, this was not the intent of the
application.
(closes issue ASTERISK-20113)
Reported by: serginuez
patches:
app_parkandannounce.diff uploaded by serginuez (License 6405)
........
Merged revisions 381916 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 381917 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381918 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Apparently this feature became broken in 11, probably as a result
of the Hangup Cause project.
(closes issue ASTERISK-21113)
Reprted by: Heiko Wundram
Patches:
app_dial.patch uploaded by Heiko Wundram (license 5822)
........
Merged revisions 381880 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you started/stopped recording of a conference multiple times channels
would remain active even when all participants left the conference. This
was due to the fact that a reference to the confbridge was being added
every time a start record command was issued, but when the recording was
stopped there was no matching de-reference thus keeping the conference alive.
Made sure only a single reference is added for the record thread no matter how
many times recording is started/stopped. A de-reference is issued upon thread
ending.
Note, this issue is being fixed under AST-1088 since it relates to it and
should have been corrected along with those modifications.
(issue AST-1088)
Reported by: John Bigelow
........
Merged revisions 381737 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381741 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if one starts, stops, and then starts a recording again for a
conference the recorded data is appended to the file originally created
on the first record start. An option record_file_append has been added
that defaults to "yes", but when set to "no" will force creation of a new
file between every record start/stop.
(issue AST-1088)
Reported by: John Bigelow
Review: http://reviewboard.digium.internal/r/374/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A deadlock occurred after starting/stopping and then restarting a confbridge
recording. Upon starting a recording a record thread is created that holds a
lock until just before exiting. Stopping the recording does not stop/exit the
thread or release the lock. The thread waits until recording begins again.
Starting a stopped recording signals the thread to continue and start recording
again. However restarting the recording also created another record thread
resulting in a deadlock. The fix was to make sure the record thread was only
created once.
Also it was noted that filenames for the recordings were being concatenated for
each start/stop. This was fixed by creating a new file for each conference
session and appending the actual recorded data within the file (e.g. passing
the 'a' option to MixMonitor).
(issue AST-1088)
Reported by: John Bigelow
Review: http://reviewboard.digium.internal/r/374/
........
Merged revisions 381702 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added the following flags to the CLI "confbridge list <conference>" output:
A - The user is an admin
M - The user is a marked user
W - The user must wait for a marked user to join
E - The user will be kicked after the last marked user leaves the conference
w - The user is waiting for a marked user to join
* Added the following header to the AMI ConfbridgeList events:
WaitMarked, EndMarked, and Waiting.
(closes issue AST-1101)
Reported by: John Bigelow
Patches:
confbridge-show-admin3.txt (license #5091) patch uploaded by John Bigelow
Modified
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows a module to define its configuration in XML in source, such
that it can be parsed by the XML documentation engine. Documentation is
generated in a two-pass approach:
1. The documentation is first generated from the XML pulled from the source
2. The documentation is then enhanced by the registration of configuration
options that use the configuration framework
This patch include configuration documentation for the following modules:
* chan_motif
* res_xmpp
* app_confbridge
* app_skel
* udptl
Two new CLI commands have been added:
* config show help - show configuration help by module, category, and item
* xmldoc dump - dump the in-memory representation of the XML documentation to
a new XML file.
Review: https://reviewboard.asterisk.org/r/2278
Review: https://reviewboard.asterisk.org/r/2058
patches:
on review 2058 uploaded by twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The core module related to coloring terminal output was old and needed
some love. The main thing here was an attempt to get rid of the
obscene number of stack-local buffers that were allocated for no other
reason than to colorize some output. Instead, this uses a simple trick
to allocate several buffers within threadlocal storage, then
automatically rotates between them, so that you can make multiple calls
to the colorization routine within one function and not need to
allocate multiple buffers.
Review: https://reviewboard.asterisk.org/r/2241/
Patches:
bug.patch uploaded by Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The function call ast_db_deltree returns the number of row deleted, or a
negative number if it failed. DBdeltree was treating any non-zero return
as an error, causing a spurious verbose error message to be displayed.
This patch handles the return code of ast_db_deltree correctly.
(closes issue ASTERISK-21070)
Reported by: ianc
patches:
dbdeltree.diff uploaded by ianc (License #5955)
........
Merged revisions 381364 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 381365 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, ConfBridge does not send manager events for ConfbridgeMute,
ConfbridgeUnmute, ConfbridgeStartRecord and ConfbridgeStopRecord. This patch
adds these events to the manager.
The reporter's patch moves some other events up to the beginning of the file.
The patch being committed is based on the patch contributed from the reporter of
this issue. I have made a lot of modifications to the patch in order for it to
fit in better with what we currently are doing in the code when it comes to
manager events. I also made a few changes to the <see-also> elements on some of
the events.
(closes issue ASTERISK-20827)
Reported by: Clint Davis
Tested by: Clint Davis, Michael L. Young
Patches:
20827.diff uploaded by Clint Davis (license 6453)
asterisk-20827-confbridge-events.diff uploaded by
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2309/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If say.conf did not exists prior to originally loading module app_playback it
would not load on subsequent reloads of the module once it had been created.
This occurred because upon reload of the app_playback module it would only
load a new configuration if an old one had previously existed. This fix simply
removed the association between checking if an old configuration existed and
the loading of the new one.
(closes issue ASTERISK-20800)
Reported by: pgoergler
........
Merged revisions 381216 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 381217 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unloading ConfBridge caused the next AMI action received to crash
Asterisk.
* Add the missing unregister of AMI action ConfbridgeSetSingleVideoSrc
when ConfBridge is unloaded.
(closes issue ASTERISK-20994)
Reported by: Jeremy Kister
Patches:
jira_asterisk_20994_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: Rusty Newton, Jeremy Kister
........
Merged revisions 381067 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Page and ConfBridge custom announcement did not play when users
entered the conference.
* Fix the CONFBRIDGE(user,announcement) file not getting played. The code
to do this got removed accidentally when the ConfBridge code was
restructured to be more state machine like.
* Fixed play_prompt_to_user() doxygen comments.
* Fixed the Page A(x) and n options for the caller. The caller never
played the announcement file and totally ignored the n option. The code
to do this was lost when the application was converted to use ConfBridge.
* Factored out setup_profile_bridge(), setup_profile_paged(), and
setup_profile_caller() routines to setup ConfBridge profiles. Made each
profile setup routine use the default template if one has not already been
setup by dialplan.
(closes issue ASTERISK-20990)
Reported by: Jeremy Kister
Tested by: rmudgett
........
Merged revisions 380894 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A marked user ending a conference with only end_marked users generates
error messages:
ERROR[0000][C-00000000]: confbridge/conf_state.c:47 conf_invalid_event_fn: Invalid event for confbridge user ''
* The MULTI_MARKED state was doing too much when it was kicking out the
end_marked users from the conference. The kicked out users will clean up
after themselves when they exit the conference.
(closes issue ASTERISK-20991)
Reported by: Jeremy Kister
Tested by: rmudgett
........
Merged revisions 380892 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "sound_only_one" sound was not being set even though it was configured. In
looking into this, I found that the "join" and "leave" prompts were not being
set either.
(closes issue ASTERISK-20898)
Reported by: Stephan
Tested by: Stephan
Patches:
asterisk-20898-custom-sounds-ignored.diff uploaded by
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2289/
........
Merged revisions 380193 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380194 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for ConfbridgeList states that the Conference field is
optional. That's not really the case: if you fail to provide a Conference
number, the command will kick back an error.
(closes issue AST-1090)
Reported by: John Bigelow
........
Merged revisions 380028 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The old prompts for the administrator menu were inadequate. They didn't mention
that the menu had additional options through the 8 key and pressing the 8 key
wouldn't reveal what those options were. This patch fixes all of that while
also organizing code pertaining to each individual menu type which was
previously all stored in one gigantic function along with many of the basic
conference functions.
(closes issue AST-996)
Reported by: John Bigelow
Review: http://reviewboard.digium.internal/r/360/
........
Merged revisions 379885 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379892 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the capability for asynchronous manipulation of audio being
played back to a channel though a new AMI action "ControlPlayback". The
ControlPlayback action supports a number of operations, the availability of
which depend on the application being used to send audio to the channel.
When the audio playback was initiated using the ControlPlayback application
or CONTROL STREAM FILE AGI command, the audio can be paused, stopped,
restarted, reversed, or skipped forward. When initiated by other mechanisms
(such as the Playback application), the audio can be stopped, reversed, or
skipped forward.
Review: https://reviewboard.asterisk.org/r/2265/
(closes issue ASTERISK-20882)
Reported by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two bugs:
* If an outbound call is made from a SLA phone using SLAStation, then there is
no ringtone audible to the phone that originates the call. The indication of
the ringing was not being passed to the SLA station; this patch fixes that
by passing through the progress indications.
* If an SLA station hangs up before the called party answers, then the channel
to the called party continues to ring until a timeout occurs. If the called
party manages to answer, Asterisk attempts to connect the called party to
a non-existant MeetMe room. This patch corrects the behavior by abandoning
the call attempt if it detects that the SLA station is no longer in use
while attempting to call the called party.
Review: https://reviewboard.asterisk.org/r/2275/
(closes issue ASTERISK-20462)
Reported by: dkerr
patches:
asterisk-11-bugid20440+20462.patch uploaded by dkerr (license 5558)
asterisk-11-bugid20462.patch uploaded by dkerr (license 5558)
(closes issue ASTERISK-20440)
Reported by: dkerr
patches:
asterisk-11-bugid20440.patch uploaded by dkerr (license 5558)
asterisk-11-bugid20440+20462.patch uploaded by dkerr (license 5558)
........
Merged revisions 379825 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379826 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Generate a warning message if sound files do not exist when trying to
play the user count to the conference. Use the new helper routine
sound_file_exists() for consistency.
* Put the new user into autoservice when playing user counts to the
conference.
* Check the return value of ast_bridge_impart().
........
Merged revisions 379808 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An incorrect string initializations was left in ast_str_encode_mime from the
patch that converted string manipulations to use ast_str strings (r191140).
The string initialization causes a crash when ast_str_set is called on
the string later on in the function.
(closes issue ASTERISK-18697)
Reported by: Chris Boot
patches:
minivm-null-pointer-dereference-fix.patch uploaded by bootc (license 6309)
(issue ASTERISK-20854)
Reported by: Chris Warr
Tested by: Chris Warr
........
Merged revisions 379608 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379609 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the restructuring work got committed to Confbridge in r375470 to
fix many open issues, it caused a regression in the reported count of
users when conference information was requested via CLI or manager.
This corrects the user count and user information displayed when
listing conference information from the CLI and manager.
(closes issue ASTERISK-20938)
Reported By: Timo Teras
Patches:
confbridge-list.patch uploaded by Timo Teras (license 5409)
........
Merged revisions 379478 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_voicemail will no longer issue error messages when it retrieves an msg_id
with a NULL value from realtime and will instead simply populate the msg_id
field with a newly generated msg_id. In addition, this patch changes the way
msg_ids are generated to eliminate certain causes of duplicate IDs appearing
within a single system. In addition, when messages are copied, they will now
receive a new msg_id.
(closes issue ASTERISK-20717)
Reported by: Alec Davis
Review: https://reviewboard.asterisk.org/r/2220/
........
Merged revisions 379460 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ringinuse=no queue members can receive more than one call if these
calls happen at nearly the same time.
* Fix so a queue member does not receive more than one call from a queue.
NOTE: This fix does not prevent multiple calls to a member if the member
is in more than one queue.
* Did some refactoring to eliminate some code redundancy.
(issue ASTERISK-16115)
Reported by: nik600
Patches:
jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett
Modified
* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378687 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the "h" extension is present within the context of the queue, all calls
are being reported COMPLETECALLER even when the agent is hanging up the call.
This patch checks to see if the agent hung-up or not instead of only relying on
checking if the queue (caller) channel hung-up or not. It would appear that
having the h extension in the mix, the pbx goes to the h extension,
"hanging-up" the queue channel and triggering the reporting of COMPLETECALLER.
(closes issue ASTERISK-20743)
Reported by: call
Tested by: call, Michael L. Young
Patches:
asterisk-20743-q-cmplt-caller.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2256/
........
Merged revisions 378514 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378515 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378516 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is an interesting feature that allows additional strings to be used to
search the Directory, primarily intended to be used with nicknames, but could
be used with affiliations and the like. Because the name field is used in
more than one place (such as email notifications), it is important that these
additional strings not be placed in the name field, but be specified
separately.
Review: https://reviewboard.asterisk.org/r/2244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the option ringinuse=no set, the patch committed for ASTERISK-16115
causes non-SIP queue members to never be called because the device state
is checked after a channel is created to determine if the member is busy.
These queue members always get the "Member %s is busy, cannot dial"
message.
Most channel drivers other than chan_sip use the default device state
handling. The default device-state state is considered in use or unknown
if the channel exists or not respectively.
(closes issue ASTERISK-20801)
Reported by: rmudgett
Patches:
jira_asterisk_16115_revert_r370418_v1.8.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 378036 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378037 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378038 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When two users entered a new conference simultaneously, one of the callers
hears MOH. This happened if two unmarked users entered simultaneously and
also if a waitmarked and a marked user entered simultaneously.
* Created a confbridge internal MOH API to eliminate the inlined MOH
handling code. Note that the conference mixing bridge needs to be locked
when actually starting/stopping MOH because there is a small window
between the conference join unsuspend MOH and actually joining the mixing
bridge.
* Created the concept of suspended MOH so it can be interrupted while
conference join announcements to the user and DTMF features can operate.
* Suspend any MOH until the user is about to actually join the mixing
bridge of the conference. This way any pre-join file playback does not
need to worry about MOH.
* Made post-join actions only play deferred entry announcement files.
Changing the user/conference state during that time is not protected or
controlled by the state machine.
(closes issue ASTERISK-20606)
Reported by: Eugenia Belova
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2232/
........
Merged revisions 377992 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377993 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378002 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made destroy_conference_bridge() destroy a missed ast_mutex_t and ast_cond_t.
* Made join_conference_bridge() init the ast_mutex_t's and ast_cond_t so
destroy_conference_bridge() can destroy them unconditionally.
* Made join_conference_bridge() abort if the new conference could not be
added to the conferences container.
* Made leave_conference() discard any post-join actions if
join_conference_bridge() had to abort early.
* Made the join_conference_bridge() diagnostic messages better describe
what happened.
* Renamed leave_conference_bridge() to leave_conference() and made it only
take a conference user pointer. The conference pointer was redundant.
* Made conf_bridge_profile_copy() use struct copy instead of memcpy().
* No need to lock the conference in start_conf_record_thread() since all
of the callers already have it locked.
........
Merged revisions 377354 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377355 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made func_confbridge_helper() allow an empty value when setting options.
You previously could not Set(CONFBRIDGE(user,pin)=) and clear the
configured pin from the dialplan.
* Made func_confbridge_helper() handle its datastore better if multiple
threads attempt to set the first CONFBRIDGE option value on the channel.
* Made the func_confbridge_helper() only output one diagnostic message
concerning the option.
* Made the bridge video_mode able to repeatedly change in the config file
and CONFBRIDGE dialplan function. The video_mode option values are an
enum and not independent of each other.
* Made handle_cli_confbridge_show_bridge_profile() better handle the
video_mode option.
* Simplified datastore handling code in conf_find_user_profile() and
conf_find_bridge_profile().
(closes issue ASTERISK-20655)
Reported by: Birger "WIMPy" Harzenetter
........
Merged revisions 377227 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377228 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removed call to ast_module_user_hangup_all() in res_config_mysql.c since
it is effectively a noop. No channels can attach a reference to that
module.
* Removed call to ast_module_user_hangup_all() in app_celgenuserevent.c.
The caller of unload_module() has already called it.
* Removed redundant channel module references in pbx_dundi.c. The
registered dialplan function callback dispatchers for the read/read2/write
callbacks already reference the module before calling.
* pbx_dundi: Moved unregistering CLI commands, DUNDi switch, and dialplan
functions to the first thing the unload_module() does. This will reduce
the chance of new channels using DUNDi services while the module is being
torn down.
........
Merged revisions 376657 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376658 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376659 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When confbridge was changed to handle conference status with a state machine in
r374658. The function responsible for starting recording for a conference was
refactored with the function actually responsible for launching the recording
thread being split into a function with another name. The old function name was
still used for manually started recordings through AMI or CLI. This patch fixes
that by switching which function is used to start recording the conference.
(closes issue ASTERISK-20601)
Reported by: Vilius
Patches:
confbridge_mixmonitor.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 375470 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375471 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a caller enters a queue and no queue member answers the call, the current
behaviour can be a little odd depending on the paused status of the queue
members. If any queue member is paused, but not all, the CDR disposition
will be BUSY. If all queue members are paused, then the CDR disposition is
based instead on the disposition of the call prior to entering the Queue.
This patch modifies the behaviour in the following ways:
* If no queue members are paused, the CDR disposition is whatever the
disposition was prior to going into Queue. If the call was answered this
will be ANSWERED; otherwise, it is NO ANSWER.
* If some queue members are pused, the CDR result is NO ANSWER. (This is a
change in behaviour, as the result would previously have been BUSY)
* If all queue members are paused, the CDR result is whatever the result was
prior to going into Queue. This is the same as the behaviour prior to this
patch.
* If the caller hangs up, times out, or presses '*' with the 'h' option, the
CDR disposition is again not set and is dependent on whether or not the
caller was Answered prior to entering Queue.
This patch was based on one provided by Thomas Arimont, but has been modified
to accomodate findings by the reviewers.
Review: https://reviewboard.asterisk.org/r/2064/
(closes issue AST-906)
Reported by: Thomas Arimont
(closes issue ASTERISK-17776)
Reported by: Attila Megyeri
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix documentation error when validating the xml in trunk caused by r375150.
Moved the description end tag down to below the variablelist element end tag.
Found when compiling with --dev-mode-enabled.
(issue ASTERISK-20289)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375215 65c4cc65-6c06-0410-ace0-fbb531ad65f3
