to set the qualify frequency.
(closes issue #11597)
Reported by: wilder
Patches:
qualifyfreq5.patch uploaded by wilder (license 362)
-- with some mods by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
will monitor this second device's state for the member, even though it actually calls the first
interface. This ability has been added for statically defined queue members, realtime queue members,
and dynamic queue members added through the CLI, dialplan, or manager.
(closes issue #11603, reported by acidv)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(this implementation is not very memory efficient as the parameters and their values will be duplicated for each channel that has the same settings, but we can worry about that later once it is working)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add a new console channel driver, chan_console, which is a console channel
driver that uses portaudio as a cross platform audio interface. It was written
to provide a console channel driver that works with Mac CoreAudio, but it
supports a number of other audio interfaces, as well, including OSS and ALSA.
It could one day be the single console channel driver, but does not yet have
as many features as chan_oss.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
from 'keypad_entry' to 'region'. Fix the example file accordingly.
Also make some fixes in the code do reset entries on reload of the keypad.
The recently committed kpad2.jpg has the correct names.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the QUEUE_MAX_PENALTY and the newly introduced QUEUE_MIN_PENALTY during a call depending
on the amount of time passed. The purpose is to allow the call to open up to more (or maybe
just different) members without the caller's losing his place in the queue. See
configs/queuerules.conf.sample for an example of how to set up queue rules and configs/queues.conf.sample
for how to associate a rule with a queue.
Along with the functional changes, new CLI and manager commands exist to show the rules defined and
there is an additional CLI command to reload the queue rules.
Future enhancements that may be made: support for realtime queue rules and support for dynamically adding
a rule through the manager or CLI. Also a manager command to reload the queue rules (I'll probably write
this myself very soon).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by adding an exclamation mark to the dial string.
This patch also exists for 1.4 in the fixtoheader-1.4 branch
and has been in production for quite some time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces two new options for zapata.conf: mwimonitor and mwimonitornotify.
The mwimonitor option enables MWI monitoring. When the MWI state on a line changes,
then the script specified by mwimonitornotify will be executed for custom handling
of the state change, similar to the externnotify option of voicemail.conf.
Also, when the MWI state on an FXO line changes, an internal Asterisk event is
generated to indicate the new state of the associated mailbox. That may, any
module that cares about MWI information will get notified and can handle it
just as if app_voicemail had sent this notification.
(BE-253, original patch from markster, with some minor modifications by me to
add comments, documentation, and internal event support)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. When moh is started, we search first in memory to find the class. If we do not
find it in memory, we search realtime instead.
2. When moh is restarted (as in, it had been started on this particular channel, stopped,
and now we're starting it again), if using the "files" mode, then realtime will always
be rechecked. If you are using other modes, however, we will simply reattach to the external
running process which was playing moh earlier in the call. This is a necessary compromise so that
we don't end up with too many background processes.
3. musiconhold.conf has a general section now. It has one option: cachertclasses. If set to yes,
then moh classes found in realtime will be added to the in-memory list. This has the advantage
of not requiring database lookups each time moh is started, but it has the disadvantage of not
truly being realtime.
I have tested this for functionality, and it passes. I also tested this under valgrind and there
are no memory problems reported under typical use.
Special thanks to Sergee for implementing this feature and enduring my complaints on the bugtracker!
(closes issue #11196, reported and patched by sergee)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89622 | murf | 2007-11-26 23:24:02 -0700 (Mon, 26 Nov 2007) | 1 line
closes issue #11379; OK, this is an attempt to make both sides happy. To the cdr.conf file, I added the option 'unanswered', which defaults to 'no'. In this mode, you will see a cdr for a call, whether it was answered or not. The disposition will be NO ANSWER or ANSWERED, as appropriate. The src is as you'd expect, the destination channel will be one of the channels from the Dial() call, usually the last in the list if more than one chan was specified. With unanswered set to 'yes', you will still see this cdr entry in both cases. But in the case where the dial timed out, you will also see a cdr for each line attempted, marked NO ANSWER, with no destination channel name. The new option defaults to 'no', so you don't see the pesky extra cdr's by default, and you will not see the irritating 'not posted' messages.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89559 | tilghman | 2007-11-25 11:17:10 -0600 (Sun, 25 Nov 2007) | 14 lines
We previously attempted to use the ESCAPE clause to set the escape delimiter to
a backslash. Unfortunately, this does not universally work on all databases,
since on databases which natively use the backslash as a delimiter, the
backslash itself needs to be delimited, but on other databases that have no
delimiter, backslashing the backslash causes an error.
So the only solution that I can come up with is to create an option in res_odbc
that explicitly specifies whether or not backslash is a native delimiter. If
it is, we use it natively; if not, we use the ESCAPE clause to make it one.
Reported by: elguero
Patch by: tilghman
(Closes issue #11364)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
way of handling DTMF in SIP. Totally undocumented, but implemented
in enough devices so we have to support it.
Code by sergee, small changes by oej.
Closes issue #11049
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89173 | crichter | 2007-11-12 12:26:48 +0100 (Mo, 12 Nov 2007) | 1 line
if we're NT and no number was dialed and overlapdial is set, we wait for the ISDN timeout instead of starting our own timer. added a comment for the misdn.conf.sample for the overlapdial config option.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89169 | crichter | 2007-11-12 10:45:36 +0100 (Mo, 12 Nov 2007) | 1 line
aded ntkeepcalls option, to avoid droÃpping calls when the L2 goes down on a PTP link. There are some pbx which do turn off the L1 for a very short while and restart it immediately. normally T310 should be started and after 10 seconds or so the calls should be dropped, this is a simple fix wihtout this timer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was mistakenly deleted in 1.4 without ever being merged to trunk.
Reported by eliel on #asterisk-dev.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
phones to be rung in a specific order.
(closes issue #7279, reported and initially patched by diLLec, patch reworked by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: ruffle
Patches:
app_voicemail.c.diff uploaded by ruffle (license 201)
10739-moveheard.diff uploaded by qwell (license 4)
Tested by: callguy, ruffle
Add an option to disable the automatic moving of "heard" messages to the Old folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82871 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snar
Patches:
app-queue-cdr-trunk.patch uploaded by snar (license 245)
queues.conf.patch uploaded by snar (license 245)
Add an updatecdr option to queues.conf, so that if a "member name" is specified,
the cdr record will be updated with that, rather than the channel.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82800 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: junky
Patches:
register_trying.diff.txt uploaded by jcmoore
Disable sending 100 Trying on REGISTER attempts and make it an option. This has been signed off by oej.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ extensive documentation changes both in sip.conf.sample and in the source;
+ allow "externip" and "externhost" to include a port number as well;
+ allow "bindaddr" to have a port number (making bindport unnecessary,
even though it is still present for backward compatibility);
+ introduce the new "stunaddr" parameter to specify an STUN server to
be used from the main SIP socket;
+ extend the "sip show settings" output to show all the above.
Internally:
+ change related data structures from struct in_addr to struct sockaddr_in
to store the port numbers as well;
+ reorganize ast_sip_ouraddrfor() (should also be renamed to sip_ouraddrfor()
because it is not a generic API, though it might become so if called with
a socket as an additional argument, in which case it can be moved elsewhere).
As mentioned in the documentation, media sessions still do not use STUN so the
port numbers may still be incorrect when Asterisk is behind a NAT
On passing, some of the debugging messages printing media addresses are
probably using the wrong values, but this will be checked/fixed in a
subsequent commit if needed.
Part of the following chunk in the function that handles a "sip reload" is
probably needed on previous versions as well, to avoid leaking the memory
used for the "localaddr" list:
@@ -17244,13 +17274,17 @@
/* Reset IP addresses */
memset(&bindaddr, 0, sizeof(bindaddr));
+ memset(&stunaddr, 0, sizeof(stunaddr));
+ memset(&internip, 0, sizeof(internip));
+ /* Free memory for local network address mask */
+ ---> ast_free_ha(localaddr); <-----
memset(&localaddr, 0, sizeof(localaddr));
memset(&externip, 0, sizeof(externip));
memset(&default_prefs, 0 , sizeof(default_prefs));
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
