New responses sent within a PJSIP sessions are based on those that were
sent before. Therefore, adding/modifying a header once causes it to be
sent on all responses that follow.
Sending 181 Call Is Being Forwarded many times first adds "histinfo"
duplicated more and more, and eventually overflows past the array
boundary.
This commit adds a check preventing adding "histinfo" more than once,
and skipping it if there is no more space in the header.
Similar overflow situations can also occur in res_pjsip_path and
res_pjsip_outbound_registration so those were also modified to
check the bounds and suppress duplicate Supported values.
ASTERISK-29227
Reported by: Ivan Poddubny
Change-Id: Id43704a1f1a0293e35cc7f844026f0b04f2ac322
If a remote side is broken and sends an SDP that can not be
negotiated the call will be torn down but there is a window
where a second 183 Session Progress or 200 OK that is forked
can be received that also attempts to negotiate SDP. Since
the code marked the SDP negotiation as being done and complete
prior to this it assumes that there is an active local and remote
SDP which it can modify, while in fact there is not as the SDP
did not successfully negotiate. Since there is no local or remote
SDP a crash occurs.
This patch changes the pjmedia_sdp_neg_modify_local_offer2
function to no longer assume that a previous SDP negotiation
was successful.
ASTERISK-29196
Change-Id: I22de45916d3b05fdc2a67da92b3a38271ee5949e
refer_progress_notify wasn't always being called from the progress
serializer. This could allow clearing notification->progress->sub
in one thread while another was trying to use it.
* Instances where refer_progress_notify was being called in-line,
have been changed to use ast_sip_push_task().
Change-Id: Idcf1934c4e873f2c82e2d106f8d9f040caf9fa1e
After some changes to streams and topologies, receiving fax through
local channels stopped working. This change adds a stream topology with
a stream of type IMAGE to the local channel pair and allows fax to be
received.
ASTERISK-29035 #close
Change-Id: Id103cc5c9295295d8e68d5628e76220f8f17e9fb
Provided a support of a MIME-type for wav16. Added new MIME-type
for classic wav.
ASTERISK-29275 #close
Change-Id: I749bda287ba1ab20c1e0af5e4c0153817d47873b
Two previous commits, 620d9f4 and 6d980de, allow to set up a call
without audio, again. That was introduced originally with commit f04d5fb
but changed and broke over time. The original commit missed one
scenario: A [peer] section in sip.conf, which does not allow audio at
all. In that case, chan_sip rejected the call, although even when the
requester offered no audio. Now, chan_sip does not check whether there
is no audio format but checks whether there is no format in general. In
other words, if there is at least one format to offer, the call succeeds.
However, to prevent calls with no-audio, chan_sip still rejects calls
when both call parties (caller = requester of the call *and* callee =
[peer] section in sip.conf) included audio. In such a case, it is
expected that the call should have audio.
ASTERISK-29280
Change-Id: I0fb74faf51ef22a60c10b467df6a4d1c1943b73e
If there's no secret specified for an iax2 peer and there's no secret
specified in the dial string, Asterisk will crash if the auth method
requested by the peer is MD5 or plaintext. You also couldn't specify
a default auth method in the [general] section of iax.conf so if you
don't have static peers defined and just use the dial string, Asterisk
will still crash even if you have a secret specified in the dial string.
* Added logic to iax2_call() and authenticate_reply() to print
a warning and hanhup the call if encryption is requested and
there's no secret or auth method. This prevents the crash.
* Added the ability to specify a default "auth" in the [general]
section of iax.conf.
ASTERISK-29624
Reported by: N A
Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254
The previous commit 6d980de fixed this issue in the core of Asterisk.
With that, each channel technology can be used without audio
theoretically. Practically, the channel-technology driver chan_sip
turned out to have an invalid check preventing that. chan_sip tested
whether there is at least one audio format. However, chan_sip has to
test whether there is at least one format. More cannot be tested while
requesting chan_sip because only the [general] capabilities but not the
[peer] caps are known yet. And the [peer] caps might not be a subset or
show any intersection with the [general] caps. This change here fixes
this.
The original commit f04d5fb, thirteen years ago, contained a software
bug as it passed ANY audio capability to the channel-technology driver.
Instead, it should have passed NO audio format. Therefore, this
addressed issue here was not noticed in Asterisk 1.6.x and Asterisk 1.8.
Then, Asterisk 10 changed that from ANY to NO, but nobody reported since
then.
ASTERISK-29265
Change-Id: Ic16a3bf13cd1b5c4fc4041ed74961177d96b600f
When a Transfer/REFER is executed, TRANSFERSTATUSPROTOCOL variable is
0 when no protocl specific error
SIP example of failure, 3xx-6xx for the SIP error code received
This allows applications to perform actions based on the failure
reason.
ASTERISK-29252 #close
Reported-by: Dan Cropp
Change-Id: Ia6a94784b4925628af122409cdd733c9f29abfc4
if From number contain * or # asterisk will not add user=phone
Currently only number that uses AST_DIGIT_ANYNUM can have "user=phone" but the validation should use AST_DIGIT_ANY
this is a problem when you want to send call to ISUP
as they will disregard the From header and either replace From with anonymous or with p-asserted-identity
ASTERISK-29261
Reported by: Mark Petersen
Tested by: Mark Petersen
Change-Id: I3307bdbf757582740bfee4110e85f7b6c9291cc4
This completes the fix for ASTERISK_24543. Only when the call is an
outgoing call, consult and append the configured format capabilities
(p->caps). When all audio formats got rejected the negotiated format
capabilities (p->jointcaps) contain no audio formats for incoming
calls. This is required when there are other accepted media streams.
ASTERISK-29258
Change-Id: I8bab31c7f3f3700dce204b429ad238a524efebb9
Provided a support of variuos URL-schemes for res_musiconhold,
registered by ast_bucket_scheme_register().
ASTERISK-29262 #close
Change-Id: If0ea8697587353dce358a70035d82649fd4632b6
From https://www.mail-archive.com/bug-autoconf@gnu.org/msg04408.html
> ... the long-obsolete AC_HEADER_STDC, previously used internally by
> AC_INCLUDES_DEFAULT, used AC_EGREP_HEADER. The AC_HEADER_STDC macro
> is now a no-op (and is not used at all within Autoconf anymore), so
> that change is likely what made the first use of AC_EGREP_HEADER the
> one inside the if condition, causing the observed results.
The implication is that the test does nothing anyway, and due to it
being a no-op from 2.70 onwards, results in the required not being set
to yes, resulting in ./configure to fail.
Change-Id: Ic1ff38d87f791fbf1f2a80512f81bb7110392460
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
The last argument to ast_copy_string() is the buffer size, not the
number of characters, so we add 1 to avoid stamping out the final \n
in the persisted SUBSCRIBE message.
Change-Id: I019b78942836f57965299af15d173911fcead5b2
There are a couple of parameters (datalen and data) that do not get set
in chan_pjsip_indicate which could cause an Invalid message to pop up
for things such as fax. This patch adds them to the frame.
Change-Id: Ia51be086a0708be905e73d1f433572c49c7e38f8
function ast_sip_session_media_state_add.
Check ast_media_type matches when a ast_sip_session_media is found
otherwise when transitioning from say image to audio, the wrong
session is returned in the first if statement.
ASTERISK-29220 #close
Change-Id: I6f6efa9b821ebe8881bb4c8c957f8802ddcb4b5d
When both a tech subscription and an endpoint subscription exist for a given
endpoint, TextMessageReceived events are dispatched to the tech subscription
only.
ASTERISK-29229
Change-Id: I9eac4cba5f9e27285a282509395347abc58fc2b8
Previously, chan_sip parsed all known media streams in an SDP offer
like video (and text) even when videosupport=no (and textsupport=no).
This wasted processor power. Furthermore, chan_sip accepted SDP offers,
including no audio but just video (or text) streams although
videosupport=no (or textsupport=no). Finally, chan_sip denied the whole
offer instead of individual streams when they had encryption (SDES-sRTP)
unexpectedly enabled.
ASTERISK-29238
ASTERISK-29237
ASTERISK-29222
Change-Id: Ie49e4e2a11f0265f914b684738348ba8c0f89755
session->channel doesn't exist until chan_pjsip creates it, so intead of
setting a channel variable every new incoming call sets one and the same
global variable.
This patch moves the code to chan_pjsip so that SIPDOMAIN is set on
a newly created channel, it also removes a misleading reference to
channel->session used to fetch call pickup configuraion.
ASTERISK-29240
Change-Id: I90c9bbbed01f5d8863585631a29322ae4e046755
The fix for ASTERISK-27902 made chan_pjsip process SIP responses twice.
This resulted in extra noise in logs (for example, "is making progress"
and "is ringing" get logged twice by app_dial), as well as in noise in
signalling: one incoming 183 Session Progress results in 2 outgoing 183-s.
This change splits the response handler into 2 functions:
- one for updating HANGUPCAUSE, which is still called twice,
- another that does the rest, which is called only once as before.
ASTERISK-28016
Reported-by: Alex Hermann
ASTERISK-28549
Reported-by: Gant Liu
ASTERISK-28185
Reported-by: Julien
Change-Id: I0a1874be5bb5ed12d572d17c7f80de6e5e542940
With newer version of linux /var/run/ is a symlink to /run/ that has
been turned into tmpfs.
Added note that if asterisk has to bind to a specific IP that
systemd has to wait until the network is up.
Added note on how to make sure that the environment variable
HOSTNAME is included.
ASTERISK-29216
Reported by: Mark Petersen
Tested by: Mark Petersen
Change-Id: Ib3e560655befd3e99eec743687144f5569533379
This reverts commit 2fe76dd816.
Reason for revert: Too many issues reported. Need to research and correct.
ASTERISK-29230
ASTERISK-29231
Reported by: Michael Maier
Change-Id: I6453af680e17d8ffe7af2c5de7e1b2a58c8793cb
Under contention it becomes possible that multiple channels will be told
they successfully obtained the lock, which is a bug. Please refer
ASTERISK-29217
This introduces a couple of changes.
1. Replaces requesters ao2 container with simple counter (we don't
really care who is waiting for the lock, only how many). This is
updated undex ->mutex to prevent memory access races.
2. Correct semantics for ast_cond_timedwait() as described in
pthread_cond_broadcast(3P) is used (multiple threads can be released
on a single _signal()).
3. Module unload races are taken care of and memory properly cleaned
up.
Change-Id: I6f68b5ec82ff25b2909daf6e4d19ca864a463e29
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
On Gentoo it's possible to have multiple lua versions installed, all
with a path of /usr, so it's not possible to use the current --with-lua
option to determisticly pin to a specific version as is required by the
Gentoo PMS standards.
This environment variable allows to lock to specific versions,
unversioned check will be skipped if this variable is supplied.
Change-Id: I8c403eda05df25ee0193960262ce849c7d2fd088
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
launch_monitor_thread is responsible for creating and initializing
the mixmonitor, and dependent data structures. There was one off
nominal path after the datastore gets created that triggers when
the channel being monitored is hung up prior to monitor starting
itself.
If this happened the monitor thread would not "launch", and the
mixmonitor object and associated objects are freed, including the
underlying datastore data object. However, the datastore itself was
not removed from the channel, so when the channel eventually gets
destroyed it tries to access the previously freed datastore data
and crashes.
This patch removes and frees datastore object itself from the channel
before freeing the mixmonitor object thus ensuring the channel does
not call it when destroyed.
ASTERISK-28947 #close
Change-Id: Id4f9e958956d62473ed5ff06c98ae3436e839ff8
Add channel reference count for PJSIP REFER. The call could be terminated
prior to the result of the transfer. In that scenario, when the SUBSCRIBE/NOTIFY
occurred several minutes later, it would attempt to access a session which was
no longer valid. Terminate event subscription if pjsip_xfer_initiate() or
pjsip_xfer_send_request() fails in transfer_refer().
ASTERISK-29201 #close
Reported-by: Dan Cropp
Change-Id: I3fd92fd14b4e3844d3d7b0f60fe417a4df5f2435
A prior patch segmented channel snapshots, and changed the underlying
data object type associated with ast_channel_snapshot_type stasis
messages. Prior to Asterisk 18 it was a type ast_channel_snapshot, but
now it type ast_channel_snapshot_update.
When publishing ast_channel_snapshot_type in pbx_realtime the
ast_channel_snapshot was being passed in as the message data
object. When a handler, expecting a data object type of
ast_channel_snapshot_update, dereferenced this value a crash
would occur.
This patch makes it so pbx_realtime now uses the expected type, and
channel snapshot publish method when publishing.
ASTERISK-29168 #close
Change-Id: I9a2cfa0ec285169317f4b9146e4027da8a4fe896
Rename check_manager_enabled() and check_webmanager_enabled() to begin
with ast_ so that the symbols are automatically exported by the
linker.
ASTERISK~29184
Change-Id: I85762b9a5d14500c15f6bad6507138c8858644c9
Segfault occurs during outbound UDP registration when all
transport states are being iterated over. The transport object
in the transport is accessed, but flow transports have a NULL
transport object.
Modify to not iterate over any flow transport
ASTERISK-29210 #close
Change-Id: If28dc3a18bdcbd0a49598b09b7fe4404d45c996a
This was dead code, test code introduced with Asterisk 13. This was
found while analyzing ASTERISK_28416 and ASTERISK_29185. This change
partly fixes, not closes those two issues.
Change-Id: I42d0daa37f6f334c7d86672f06f085858a3f3940
Add a check to see if the URI is a Tel URI and prevent crashing on
trying to retrieve the reason parameter.
ASTERISK-29191
ASTERISK-29219
Change-Id: I0320aa205f22cda511d60a2edf2b037e8fd6cc37
(cherry picked from commit a7aea71e60)
AST_VECTOR_SIZE() returns a size_t. This is not always equivalent to an
unsigned long on all machines.
Change-Id: I0a4189a104e6e3a2e2273de06620eaef19df9338
The documentation in the wiki says there should be spyee-channel
information elements in the ChanSpyStop AMI event.
https://wiki.asterisk.org/wiki/x/Xc5uAg
However, this is not the case in Asterisk <= 16.10.0 Version. We're
using these Spyee* arguments since Asterisk 11.x, so these arguments
vanished in Asterisk 12 or higher.
For maximum compatibility, we still send the ChanSpyStop event even if
we are not able to find any 'Spyee' information.
ASTERISK-28883 #close
Change-Id: I81ce397a3fd614c094d043ffe5b1b1d76188835f
Scope tracing allows you to not specify a format string or variable,
in which case it just prints the indent, file, function, and line
number. The trace output automatically adds a newline to the end
in this case. If you also have debugging turned on for the module,
a debug message is also printed but the standard log functionality
which prints it doesn't add the newline so you have messages
that don't break correctly.
* format_log_message_ap(), which is the common log
message formatter for all channels, now adds a
newline to the end of format strings that don't
already have a newline.
ASTERISK-29209
Reported by: Alexander Traud
Change-Id: I994a7df27f88df343b7d19f3e81a4b562d9d41da
In rewrite_uri asterisk was not making deep copies of strings when
changing the uri. This was in some cases causing garbage in the route
header and in other cases even crashing asterisk when receiving a
message with a record-route header set. Thanks to Ralf Kubis for
pointing out why this happens. A similar problem was found in
res_pjsip_transport_websocket.c. Pjproject needs as well to be patched
to avoid garbage in CANCEL messages.
ASTERISK-29024 #close
Change-Id: Ic5acd7fa2fbda3080f5f36ef12e46804939b198b
This adds support for both Digium and Sangoma user agent strings
for the Sangoma specific body supplement.
Change-Id: Ib99362b24b91d3cbe888d8b2fce3fad5515d9482
In some circumstances it was possible for an INVITE
session to be destroyed while we were still using it.
This occurred due to the reference on the INVITE session
being released internally as a result of its state
changing to DISCONNECTED.
This change adds a reference to the INVITE session
which is released when our own session is destroyed,
ensuring that the INVITE session remains valid for
the lifetime of our session.
ASTERISK-29022
Change-Id: I300c6d9005ff0e6efbe1132daefc7e47ca6228c9
By default libcurl does not follow redirects, so we explicitly enable
it by setting CURLOPT_FOLLOWLOCATION. Once that is enabled, libcurl
will follow up to CURLOPT_MAXREDIRS redirects, which by default is
configured to be unlimited.
This patch sets CURLOPT_MAXREDIRS to a more reasonable default (8). If
we determine at some point that this needs to be increased on
configurable it is a trivial change.
ASTERISK-29173 #close
Change-Id: I4925ebbcf0c7d728bb9252b3795b3479ae225b30
As described in the issue, /tmp is not a suitable location for a
large amount of cached media files, since most distributions make
/tmp a RAM-based tmpfs mount with limited capacity.
I opted for a location that can be configured separately, as opposed
to using a subdirectory of spooldir, given the different storage
profile (transient files vs files that might stay there indefinitely).
This commit just makes the cache directory configurable, and changes
the default location from /tmp to /var/cache/asterisk.
ASTERISK-29143
Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d
Ivan Poddubnyi
Sean Bright
Joshua C. Colp
George Joseph
Ben Ford
Boris P. Korzun
Alexander Traud
Dan Cropp
roadkill
Jaco Kroon
Robert Cripps
Jean Aunis
Kevin Harwell
Nick French
Torrey Searle
Richard Mudgett
Sungtae Kim
Pirmin Walthert
Nathan Bruning
lvl