Removed the extra space before "MODULEINFO" in res_pjsip_dlg_options.
This extra space prevented any of the dependencies from being seen by
menuselect, so building with default options would fail if PJSIP was
not installed.
This also makes the tool that extracts information for menuselect
tolerant of multiple spaces in the future.
ASTERISK-25033 #close
Reported by: Peter Whisker
Change-Id: Iccd54846f70c4a7a50cb5bf70b7bb5cb4bab3698
ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model. Additionally some of the same modules depend on one or more
res_stasis_* modules.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153
* Add AST_DEVMODE to BUILDOPTS
* Use BUILDOPTS to generate AST_BUILDOPT_SUM.
* Remove loop that defined AST_MODULE_*
These changes ensure that only ABI effecting options are considered for
AST_BUILDOPT_SUM. This also reduces unneeded full system rebuilds caused
by enabling or disabling one module that another is dependent on.
ASTERISK-25028 #close
Reported by: Corey Farrell
Change-Id: I2c516d93df9f6aaa09ae079a8168c887a6ff93a2
* The REF_DEBUG compiler flag no longer has any effect on code that uses
Astobj2. It is used to determine if reference debugging is enabled by
default. Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
This was possible now that we no longer require a dual ABI.
ASTERISK-24974 #close
Reported by: Corey Farrell
Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
External systems - such as the Asterisk Test Suite - require knowledge of the
upstream branch. Unfortunately, after moving to Git, the Asterisk version
currently consists of only a 'GIT" prefix followed by an object blob,
e.g., GIT-as08d7. This makes it difficult for such systems to know what
features are available in a particular check out of Asterisk.
This patch fixes this by hardcoding the branch in a variable in the
make_version script. Since the mainline branches are not changed often -
typically only once a year - this is a reasonable approach to solving
the problem, and is more reliable than parsing the output of 'git branch
-vv'. Branches that track off of an upstream primary branch will then get the
benefit of knowing which mainline branch they are currently based off
of.
ASTERISK-24954 #close
Change-Id: I8090d5d548b6d19e917157ed530b914b7eaf9799
Add the .gitignore and .gitreview files to the asterisk repo.
NB: You can add local ignores to the .git/info/exclude file
without having to do a commit.
Common ignore patterns are in the top-level .gitignore file.
Subdirectory-specific ignore patterns are in their own .gitignore
files.
Change-Id: I842a1588ff27d8a0189f12d597f0a7af033d6c69
Tested-by: George Joseph
This change adds an abstracted core DNS API which resembles the API described
here[1]. The API provides a pluggable mechanism for resolvers and also a
consistent view for records. Both synchronous and asynchronous queries are
supported.
This change also adds a res_resolver_unbound module which uses the libunbound
library to provide resolution.
Unit tests have also been written for all of the above to confirm the API and
functionality.
ASTERISK-24834 #close
Reported by: Matt Jordan
ASTERISK-24836 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4474/
Review: https://reviewboard.asterisk.org/r/4512/
[1] https://wiki.asterisk.org/wiki/display/AST/Asterisk+DNS+API
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The mkpkgconfig script incorrectly concatenates Cflags options together. As an
example, the following:
Cflags: -I/usr/include/libxml2 -g3
Is instead generated as:
Cflags: -I/usr/include/libxml2-g3
This patch corrects the generation of Cflags in mkpkgconfig such that the
Cflags options are output correctly.
Review: https://reviewboard.asterisk.org/r/3707/
ASTERISK-23991 #close
Reported by: Diederik de Groot
patches:
fix_mkpkgconfig.diff uploaded by Diederik de Groot (License 6600)
........
Merged revisions 430589 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430590 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI action responses can (and will) reference AMI events that they return.
These event references and definitions should not be combined with AMI events
raised elsewhere in the code, as they are specifically tied to the AMI action
that raised them.
ASTERISK-24156 #close
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous patch (r418034) fixed the 'glitch' that the channels/h323
Makefile no longer existed. Unfortunately, removing the entire line was a bit
of a blunder, as it meant that build_tools/menuselect-deps was never
generated. Hilarity ensued when actually trying to compile.
But hey! At least configure worked.
This patch fixes *that* glitch, and removes some more of the vestiges of h323.
(It had tendrils in the main Makefile? Crazy.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move some implementation specific code from astobj2_container.c into
astobj2_hash.c and astobj2_rbtree.c. This completely removes the need for
astobj2_container to switch on RTTI and it no longer has any knowledge of
the implementation details.
Also adds AO2_DEBUG as a new compile option in menuselect which controls
astobj2 debugging independently of AST_DEVMODE and REF_DEBUG.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3593/
........
Merged revisions 416806 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A GCC bug[1] can, in some cases, pop up an unsuppressible pedwarn when
using a static inline standard library function from a non-static
inline function.
This normally doesn't show up, but can occur if you're running an
upgrade version of GCC (such as GCC 4.8 on OS X, which normally runs
GCC 4.2).
[1]: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=47816
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves VarSet events for local variables raised by GoSub
over to Stasis-Core. It also tweaks up the post-processing documentation
scripts to not combine parameters if both parameters are already documented.
(issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
You will now get this:
$ asterisk -V
Asterisk GIT-1698298
Instead of this:
$ asterisk -V
Asterisk UNKNOWN__and_probably_unsupported
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
(closes issue ASTERISK-20483)
Reported by: Shaun Ruffell
Patches:
0001-build_tools-Allow-Asterisk-to-report-git-SHAs-in-ver.patch (license #5417) patch uploaded by Shaun Ruffell
Modified
........
Merged revisions 375189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375190 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375191 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some core support modules and compiler options were no longer tagged with a
module support level. This patch adds 'core' back to those options.
Note that this patch modifies a few of the patches provided by Andrew Latham
slightly. res_curl and res_fax are both 'core' supported modules.
(closes issue ASTERISK-20215)
Reported by: Andrew Latham
Tested by: mjordan
Patches:
astcanary.diff (license #5985) uploaded by Andrew Latham
cflagsxml.diff (license #5985) uploaded by Andrew Latham
curl_fax.diff (license #5985) uploaded by Andrew Latham
soundsxml.diff (license #5985) uploaded by Andrew Latham
........
Merged revisions 371507 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debugging messages and associated controls only compiled in if configured with --enable-dev-mode. Debug messages provide more detail (including thread id) and are grouped so the user/dev can limit the type of messages displayed. Functionally no real change to chan_skinny.
Review: https://reviewboard.asterisk.org/r/2040/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Certain branches, such as Certified Asterisk, may have a modifier added to
them that specifies the features available in that branch. For branches, this
modifier is expected to be reflected in the location of the branch in
subversion. For example, a subversion of URL of /certified/branches/1.8.11
would have a feature modifier of 'certified'. This is slightly different then
how features are determined for tags, where the feature is part of the actual
tag name, e.g., "10.5.0-digiumphones".
In keeping with the nomenclature used for tags, the feature specifier for
branches is translated and placed after the revision numbers. For the example
given previously, this would result in a branch version of
"Asterisk SVN-branch-1.8.11-cert-rXXXXXX".
........
Merged revisions 368604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A long time ago, in a land far far away, we added "asterisk/ast_version.h",
which provides the ast_get_version() and ast_get_version_num() functions. These
were added so that modules that needed the version information for the Asterisk
instance they were loaded in could actually get it (as opposed the version that
they were compiled against). We changed everything in the tree to use the
new mechanism (although later main/test.c was added using the old method).
However, the old mechanism was never removed, and as a result, new code is
still trying to use it.
This commit removes asterisk/version.h and replaces it with a header that
will generate a compile-time error if you try to use it (the error message
tells you which header you should use instead). It also removes the Makefile
and build_tools bits that generated the file, and it updates main/test.c to
use the 'proper' method of getting the Asterisk version information.
This is an API change and thus is being committed for trunk only, but it's
a fairly minor one and definitely improves the situation for out-of-tree
modules.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
whether modules are embedded or not; using just the bare category name led to
accidentally enabling these options when users used the wrong "--enable"
operation on the menuselect command line.
Now the internal option names are prefixed with "EMBED_", so they won't be
the same as the name of the category containing the modules they control
the embedding of.
........
Merged revisions 341022 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 341023 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339586 | lmadsen | 2011-10-06 08:43:21 -0500 (Thu, 06 Oct 2011) | 16 lines
Merged revisions 339566 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339566 | lmadsen | 2011-10-05 16:30:11 -0500 (Wed, 05 Oct 2011) | 8 lines
Update prep_tarball script to download pre-exported documentation.
I've updated the prep_tarball script to now download the pre-exported documentation
from the Asterisk wiki. This will give us more control over what is being included
in the tarball releases, and will make both the PDF and HTML exported documentation
look much better (especially when viewing from a console).
(Closes issue ASTERISK-18677)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3