Commit 39cc28f6ea attempted to fix a
test failure observed on 32 bit test agents by ensuring that a cast from
a 32 bit unsigned integer to a 64 bit unsigned integer was happening in
a predictable place. As it turns out, this did not cause test runs to
succeed.
This commit adds several redundant debug messages that print the payload
lengths of websocket frames. The idea here is that this commit will not
cause tests to succeed for the faulty test agent, but we might deduce
where the fault lies more easily this way by observing at what point the
expected value (537) changes to some ungangly huge number.
If you are wondering why something like this is being committed to the
branch, keep in mind that in commit
39cc28f6ea I noted that the observed test
failures only happen when automated tests are run. Attempts to run the
tests by hand manually on the test agent result in the tests passing.
Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d
We have seen a rash of test failures on a 32-bit build agent. Commit
48698a5e21 solved an obvious problem where
we were not encoding a 64-bit value correctly over the wire. This
commit, however, did not solve the test failures.
In the failing tests, ARI is attempting to send a 537 byte text frame
over a websocket. When sending a frame this small, 16 bits are all that
is required in order to encode the payload length on the websocket
frame. However, ast_websocket_write() thinks that the payload length is
greater than 65535 and therefore writes out a 64 bit payload length.
Inspecting this payload length, the lower 32 bits are exactly what we
would expect it to be, 537 in hex. The upper 32 bits, are junk values
that are not expected to be there.
In the failure, we are passing the result of strlen() to a function that
expects a uint64_t parameter to be passed in. strlen() returns a size_t,
which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit
unsigned value to somewhere where a 64-bit unsigned value is expected
would cause no problems. In fact, in manual runs of failing tests, this
works just fine. However, ast_websocket_write() uses the Asterisk
optional API, which means that rather than a simple function call, there
are a series of macros that are used for its declaration and
implementation. These macros may be causing some sort of error to occur
when converting from a 32 bit quantity to a 64 bit quantity.
This commit changes the logic by making existing ast_websocket_write()
calls use ast_websocket_write_string() instead. Within
ast_websocket_write_string(), the 64-bit converted strlen is saved in a
local variable, and that variable is passed to ast_websocket_write()
instead.
Note that this commit message is full of speculation rather than
certainty. This is because the observed test failures, while always
present in automated test runs, never occur when tests are manually
attempted on the same test agent. The idea behind this commit is to fix
a theoretical issue by performing changes that should, at the least,
cause no harm. If it turns out that this change does not fix the failing
tests, then this commit should be reverted.
Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
Prior to ASTERISK-24988, the WebSocket handshake was resolved before Stasis
applications were registered. This was done such that the WebSocket would be
ready when an application is registered. However, by creating the WebSocket
first, the client had the ability to make requests for the Stasis application
it thought had been created with the initial handshake request. The inevitable
conclusion of this scenario was the cart being put before the horse.
ASTERISK-24988 resolved half of the problem by ensuring that the applications
were created and registered with Stasis prior to completing the handshake
with the client. While this meant that Stasis was ready when the client
received the green-light from Asterisk, it also meant that the WebSocket was
not yet ready for Stasis to dispatch messages.
This patch introduces a message queuing mechanism for delaying messages from
Stasis applications while the WebSocket is being constructed. When the ARI
event processor receives the message from the WebSocket that it is being
created, the event processor instantiates an event session which contains a
message queue. It then tries to create and register the requested applications
with Stasis. Messages that are dispatched from Stasis between this point and
the point at which the event processor is notified the WebSocket is ready, are
stashed in the queue. Once the WebSocket has been built, the queue's messages
are dispatched in the order in which they were originally received and the
queue is concurrently cleared.
ASTERISK-25181 #close
Reported By: Matt Jordan
Change-Id: Iafef7b85a2e0bf78c114db4c87ffc3d16d671a17
This patch adds support for push configuration of dynamic, i.e.,
sorcery, objects in Asterisk. It adds three new REST API calls to the
'asterisk' resource:
* GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current
object given its ID. This returns back a list of ConfigTuples, which
define the fields and their present values that make up the object.
* PUT /asterisk/{configClass}/{objectType}/{id}: create or update an
object. A body may be passed with the request that contains fields to
populate in the object. The same format as what is retrieved using
the GET operation is used for the body, save that we specify that the
list of fields to update are contained in the "fields" attribute.
* DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic
object from its backing storage.
Note that the success/failure of these operations is somewhat
configuration dependent, i.e., you must be using a sorcery wizard that
supports the operation in question. If a sorcery wizard does not support
the create or delete mechanisms, then the REST API call will fail with a
403 forbidden.
ASTERISK-25238 #close
Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c
Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM,
which would unload a module even if it was in use.
* Changed unload mode to proper mode
ASTERISK-25173
Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533
An http request can be sent to reload an Asterisk module. If the
module can not be reloaded or is not already loaded, an error
response will be returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, based
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be reloaded through http requests
ASTERISK-25173
Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1
An http request can be sent to unload an Asterisk module. If the
module can not be unloaded or is already unloaded, an error response
will be returned.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, depending
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be unloaded through http requests
ASTERISK-25173
Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57
An http request can be sent to load an Asterisk module. If the
module can not be loaded or is loaded already, an error response
will be returned.
The command curl -v -u user:pass -X POST 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be loaded through http requests
ASTERISK-25173
Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
Prior to this patch, when a WebSocket connection is made, ARI would not
be informed of the connection until after the WebSocket layer had
accepted the connection. This created a brief race condition where the
ARI client would be notified that it was connected, a channel would be
sent into the Stasis dialplan application, but ARI would not yet have
registered the Stasis application presented in the HTTP request that
established the WebSocket.
This patch resolves this issue by doing the following:
* When a WebSocket attempt is made, a callback is made into the ARI
application layer, which verifies and registers the apps presented in
the HTTP request. Because we do not yet have a WebSocket, we cannot
have an event session for the corresponding applications. Some
defensive checks were thus added to make the application objects
tolerant to a NULL event session.
* When a WebSocket connection is made, the registered application is
updated with the newly created event session that wraps the WebSocket
connection.
ASTERISK-24988 #close
Reported by: Joshua Colp
Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636
Missed this module in the previous commit. res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f
The res_ari_device_states module depends on res_stasis_device_state,
not res_stasis_device_states.
Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de
ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model. Additionally some of the same modules depend on one or more
res_stasis_* modules.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
When the ChannelHold event was added, the 'musicclass' parameter was
erroneously removed. This caused the ChannelHold events to be rejected as
they failed model validation. This patch updates the Swagger schema such that
it now properly reflects the event that is being created.
Hooray for tests that catch things like this.
........
Merged revisions 434597 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434598 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes autological comparison warnings in the following:
* chan_skinny: letohl may return a signed or unsigned value, depending on the
macro chosen
* func_curl: Provide a specific cast to CURLoption to prevent mismatch
* cel: Fix enum comparisons where the enum can never be negative
* enum: Fix comparison of return result of dn_expand, which returns a signed
int value
* event: Fix enum comparisons where the enum can never be negative
* indications: tone_data.freq1 and freq2 are unsigned, and hence can never be
negative
* presencestate: Use the actual enum value for INVALID state
* security_events: Fix enum comparisons where the enum can never be negative
* udptl: Don't bother to check if the return value from encode_length is less
than 0, as it returns an unsigned int
* translate: Since the parameters are unsigned int, don't bother checking
to see if they are negative. The cast to unsigned int would already blow
past the matrix bounds.
* res_pjsip_exten_state: Use a temporary value to cache the return of
ast_hint_presence_state
* res_stasis_playback: Fix enum comparisons where the enum can never be
negative
* res_stasis_recording: Add an enum value for the case where the recording
operation is in error; fix enum comparisons
* resource_bridges: Use enum value as opposed to -1
* resource_channels: Use enum value as opposed to -1
Review: https://reviewboard.asterisk.org/r/4533
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4533.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434469 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434470 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some applications - such as SLA - a phone pressing hold should not behave
in the fashion that the Asterisk core would like it to. Instead, the hold
action has some application specific behaviour associated with it - such as
disconnecting the channel that initiated the hold; only playing MoH to channels
in the bridge if the channels are of a particular type, etc.
One way of accomplishing this is to use a framehook to intercept the
hold/unhold frames, raise an event, and eat the frame. Tasty. This patch
accomplishes that using a new dialplan function, HOLD_INTERCEPT.
In addition, some general cleanup of raising hold/unhold Stasis messages was
done, including removing some RAII_VAR usage.
Review: https://reviewboard.asterisk.org/r/4549/
ASTERISK-24922 #close
........
Merged revisions 434216 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Switch logger callid's from AO2 objects to simple integers.
This helps in two ways. Copying integers is faster than
referencing AO2 objects, so this will result in a small
reduction in logger overhead. This also erases the possibility
of an infinate loop caused by an invalid callid in
threadstorage.
ASTERISK-24833 #comment Committed callid conversion to trunk.
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sending the following ARI commands caused Asterisk to crash if the JSON
body 'variables' object passes values of types other than strings.
POST /ari/channels
POST /ari/channels/{channelid}
PUT /ari/endpoints/sendMessage
PUT /ari/endpoints/{tech}/{resource}/sendMessage
* Eliminated RAII_VAR usage in ast_ari_channels_originate_with_id(),
ast_ari_channels_originate(), ast_ari_endpoints_send_message(), and
ast_ari_endpoints_send_message_to_endpoint().
ASTERISK-24751 #close
Reported by: jeffrey putnam
Review: https://reviewboard.asterisk.org/r/4447/
........
Merged revisions 432404 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses the following problems:
* ari/resource_channels: In ARI, we currently create a format capability
structure of SLIN and apply it to the new channel being created. This was
originally done when the PBX core was used to create the channel, as there
was a condition where a newly created channel could be created without any
formats. Unfortunately, now that the Dial API is being used, this has two
drawbacks:
(a) SLIN, while it will ensure audio will flows, can cause a lot of
needless transcodings to occur, particularly when a Local channel is
created to the dialplan. When no format capabilities are available, the
Dial API handles this better by handing all audio formats to the requsted
channels. As such, we defer to that API to provide the format
capabilities.
(b) If a channel (requester) is causing this channel to be created, we
currently don't use its format capabilities as we are passing in our own.
However, the Dial API will use the requester channel's formats if none
are passed into it, and the requester channel exists and has format
capabilities. This is the "best" scenario, as it is the most likely to
create a media path that minimizes transcoding.
Fixing this simply entails removing the providing of the format capabilities
structure to the Dial API.
* chan_pjsip: Rather than blindly picking the first format in the format
capability structure - which actually *can* be a video or text format - we
select an audio format, and only pick the first format if that fails. That
minimizes the weird scenario where we attempt to transcode between video/audio.
* res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure.
Since ast_request already limits us down to one format capability once the
format capabilities are passed along, there's no reason to squelch it here.
* channel: Fixed a comment. The reason we have to minimize our requested
format capabilities down to a single format is due to Asterisk's inability
to convey the format to be used back "up" a channel chain. Consider the
following:
PJSIP/A => L;1 <=> L;2 => PJSIP/B
g,u,a g,u,a g,u,a u
That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials
PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local
channel has inherited those format capabilities down the line; PJSIP/B
supports only ulaw. According to these format capabilities, ulaw is
acceptable and should be selected across all the channels, and no
transcoding should occur. However, there is no way to convey this: when L;2
and PJSIP/B are put into a bridge, we will select ulaw, but that is not
conveyed to PJSIP/A and L;1. Thus, we end up with:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
g g X u u
Which causes g722 to be written to PJSIP/B.
Even if we can convey the 'ulaw' choice back up the chain (which through
some severe hacking in Local channels was accomplished), such that the chain
looks like:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
u u u u
We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back
with only 'ulaw'. This results in all the channel structures being set up
correctly, but PJSIP/A *still* sending g722 and causing the chain to fall
apart.
There's a lot of difficulty just in setting this up, as there are numerous
race conditions in the act of bridging, and no clean mechanism to pass the
selected format backwards down an established channel chain. As such, the
best that can be done at this point in time is clarifying the comment.
Review: https://reviewboard.asterisk.org/r/4434/
ASTERISK-24812 #close
Reported by: Matt Jordan
........
Merged revisions 432195 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes it so that if a channel variable is requested and it does not exist
a 404 response will be returned instead of an allocation failed response. This makes
it easier to debug and figure out what is going on for a user.
ASTERISK-24677 #close
Reported by: Joshua Colp
........
Merged revisions 432154 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new feature to ARI to redirect a channel to another server,
and fixes a few bugs in PJSIP's handling of the Transfer dialplan
application/ARI redirect capability.
*New Feature*
A new operation has been added to the ARI channels resource, redirect. With
this, a channel in a Stasis application can be redirected to another endpoint
of the same underlying channel technology.
*Bug fixes*
In the process of writing this new feature, two bugs were fixed in the PJSIP
stack:
(1) The existing .transfer channel callback had the limitation that it could
only transfer channels to a SIP URI, i.e., you had to pass
'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is
still supported, it is somewhat unintuitive - particularly in a world full
of endpoints. As such, we now also support specifying the PJSIP endpoint to
transfer to.
(2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by
updating its Contact header. Alas, that resulted in the forwarding
destination set by the dialplan application/ARI resource/whatever being
rewritten with very incorrect information. Hence, we now don't bother
updating an outgoing response if it is a 302. Since this took a looong time
to find, some additional debug statements have been added to those modules
that update the Contact headers.
Review: https://reviewboard.asterisk.org/r/4316/
ASTERISK-24015 #close
Reported by: Private Name
ASTERISK-24703 #close
Reported by: Matt Jordan
........
Merged revisions 431717 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
One of the canonical reasons for hanging up a channel is because the far end
failed to answer - or because someone else answered, and we want to get rid of
this channel. This patch adds the missing value to the 'reason' query parameter
for the DELETE /channels operation.
Review: https://reviewboard.asterisk.org/r/4400
ASTERISK-24745 #close
Reported by: Ben Merrills
patches:
add_no_answer_ari_hangup_cause.diff uploaded by Ben Merrills (License 6678)
........
Merged revisions 431622 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the documentation of ARI on the wiki. Specifically, it
addresses the following:
* Allowed values and allowed ranges weren't documented. This was particularly
frustrating, as Asterisk would reject query parameters with disallowed values
- but we didn't tell anyone what the allowed values were.
* The /play/id operation on /channels and /bridges failed to document all of
the added media resource types.
* Documentation for creating a channel into a Stasis application failed to
note when it occurred, and that creating a channel into Stasis conflicts with
creating a channel into the dialplan.
* Some other minor tweaks in the mustache templates, including italicizing the
parameter type, putting the default value on its own sub-bullet, and some
other nicities.
Review: https://reviewboard.asterisk.org/r/4351
........
Merged revisions 431145 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this changeset, posting to the: /ari/bridges/{bridgeId} endpoint without specifying a value for the [name] query parameter, would crash Asterisk if the bridge you are attempting to create (or update) had the same ID as an existing bridge. The internal mechanism of the POST operation interpreted a null value for name, thus resulting in an error condition that crashed Asterisk.
ASTERISK-24560 #close
Reported By: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/4349/
........
Merged revisions 430818 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this patch, the following two ARI commands
POST /channels
POST /channels/{id}/continue
Accept a new parameter, label, that can be used to continue to or originate
to a priority label in the dialplan.
Because this is adding a new parameter to ARI commands, the API version of
ARI has been bumped from 1.6.0 to 1.7.0.
This patch comes courtesy of Nir Simionovich from Greenfield Tech. Thanks!
ASTERISK-24412 #close
Reported by Nir Simionovich
Review: https://reviewboard.asterisk.org/r/4285
........
Merged revisions 430337 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421538 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r421311 | mjordan | 2014-08-17 20:11:28 -0500 (Sun, 17 Aug 2014) | 9 lines
res/ari/resource_channels: Don't return allocation failure on failed function
If a function fails to execute, it is most likely due to one of two reasons:
(1) The function doesn't exist or can't be read from
(2) The function is dangerous and is restricted based on the user's permissions
Currently we return allocation failure, which is incorrect. This updates the
reason code to more accurately reflect why the request failed.
ASTERISK-24215
........
r421312 | mjordan | 2014-08-17 20:13:41 -0500 (Sun, 17 Aug 2014) | 4 lines
res/ari/resource_channels: Fix compilation issue
Forgot a parameter. Whoops.
........
Merged revisions 421311-421312 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Review: https://reviewboard.asterisk.org/r/3899
........
Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r419565 | mjordan | 2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines
ARI: report duration values in LiveRecording objects
This patch adds three new fields to the LiveRecording model:
- total_duration: the total length of the live recording
- talking_duration: optional. The duration of talking energy that was
detected while the recording was made.
- silence_duration: optional. The duration of silence that was detected while
the recording was made.
These values are reported in the RecordingFinished ARI event.
When a DSP is enabled on the channel during the recording - which occurs when
the recording is created with max_silence_seconds (indicating that the user
actually cares about how much silence is in the file), we will report the
talking_duration and silence_duration in addition to the total_duration.
Review: https://reviewboard.asterisk.org/r/3770/
ASTERISK-24037 #close
Reported by: Samuel Galarneau
........
r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014) | 1 line
Update CHANGES for r419565
........
Merged revisions 419565-419566 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
........
Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new operation for stored recordings, copy. It takes an
existing stored recording and makes a copy of it in the same directory
or a relative directory under the stored recording directory.
/ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name}
This is particularly useful for voicemail-esque applications, which may need to
copy or move recordings around a directory structure.
Review: https://reviewboard.asterisk.org/r/3768/
ASTERISK-24036 #close
Reported by: Sam Galarneau
Tested by: Sam Galarneau
........
Merged revisions 419021 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two bugs:
1. When originating a channel into a Stasis application, we already create a
subscription for the channel that is going into our Stasis app.
Unfortunately, when you create a Local channel and pass it off to a Stasis
app, you really aren't creating just one channel: you're creating two. This
patch snags the second half of the Local channel pair (assuming it is a
Local channel pair, but luckily core_local is kind about such assumptions)
and subscribes to it as well.
2. Subscriptions are a bit sticky right now. If a subscription is made, the
'interest' count gets bumped on the Stasis subscription - but unless
something explicitly unsubscribes the channel, said subscription sticks
around. This is not much of a problem is a user is creating the subscription
- if they made it, they must want it. However, when we are creating
implicit subscriptions, we need to make sure something clears them out.
This patch takes a pessimistic approach: it watches the cache updates
coming from Stasis and, if we notice that the cache just cleared out an
object, we delete our subscription object. This keeps our ao2 container of
Stasis forwards in an application from growing out of hand; it also is a
bit more forgiving for end users who may not realize they were supposed to
unsubscribe from that channel that just hung up.
Review: https://reviewboard.asterisk.org/r/3710/
#ASTERISK-23939 #close
........
Merged revisions 418089 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The variables body parameter under the originate and originate with id
operations of the channel resource showed invalid JSON in its description.
The variables body parameter under the userEvent operation of the event
resource made no mention that the custom key/value pairs should be wrapped
in a variables key in order to be added to the custom user event.
ASTERISK-23975 #close
Review: https://reviewboard.asterisk.org/r/3692/
........
Merged revisions 417878 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3