This patch updates the documenation in hep.conf.sample to better specify
how the various HEP modules interact.
ASTERISK-26717 #close
Change-Id: I337fb742a89e3ec5edc7fc7a7a0295218d841124
* apps/app_voicemail.c fromstring field added to mailbox which will
override the global fromstring if set.
ASTERISK-24562 #close
Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
Original patch by John Covert, slight modifications by me.
ASTERISK-17428 #close
Reported by: John Covert
Patches:
app_voicemail.c.patch (license #5512) patch uploaded by
John Covert
Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6
The entry for 'identify' was incorrectly placed in the
res_pjsip section when it should be in
res_pjsip_endpoint_identifier_ip.
ASTERISK-26785 #close
Change-Id: Ia1372b12a952bfe2df6b1b1e0e725ca306a5d41a
This change adds experimental support for providing RTCP
feedback information to codec modules so they can dynamically
change themselves based on conditions.
ASTERISK-26584
Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857
ast_loggrabber gathers log files from customizable search patterns,
optionally converts POSIX timestamps to a readable format and
tarballs the results.
Also a few tweaks were made to ast_coredumper.
Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
(cherry picked from commit c709152878)
This utility allows easy manipulation of asterisk coredumps.
* Configurable search paths and patterns for existing coredumps
* Can generate a consistent coredump from the running instance
* Can dump the lock_infos table from a coredump
* Dumps backtraces to separate files...
- thread apply 1 bt full -> <coredump>.thread1.txt
- thread apply all bt -> <coredump>.brief.txt
- thread apply all bt full -> <coredump>.full.txt
- lock_infos table -> <coredump>.locks.txt
* Can tarball corefiles and optionally delete them after processing
* Can tarball results files and optionally delete them after processing
* Converts ':' in coredump and results file names '-' to facilitate
uploading. Jira for instance, won't accept file names with colons
in them.
Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].
[1] For *BSDs, the "devel/gdb" package might have to be installed to
get a recent gdb. The utility will check all instances of gdb
it finds in $PATH and if one isn't found that can run python, it
prints a friendly error.
Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
(cherry picked from commit cb47b45560)
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
This works the same as for AMI manager variables. Set
"channelvars=foo,bar" in your ari.conf general section, and then the
channel variables "foo" and "bar" (along with their values), will
appear in every Stasis websocket channel event.
ASTERISK-26492 #close
patches:
ari_vars.diff submitted by Mark Michelson
Change-Id: I5609ba239259577c0948645df776d7f3bc864229
Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK
(Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the
dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges.
Consequently, when the dynamic range is exhausted, this change utilizes payload
types in the range between 35 and 63 giving room for another 29 payload types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
codecs.conf.sample was missing codec opus's configuration options, descriptions,
and examples. This patch adds the configuration options and examples to
codecs.conf.sample that can be used with codec_opus.
ASTERISK-26538 #close
Change-Id: I1d89bb5e01d3e3b5bd78951b8dd0ff077a83dc8b
Removing explicit transport definition for endpoints and registrations. It
isn't necessary and isn't generally advised.
ASTERISK-26514 #close
Change-Id: Ifdec5e631962438a4683600968dfa4bfd15909fb
Support for referring to DAHDI channels by logical names was added in
(FIXME: when? Asterisk 11? 1.8?) and was intended to be part of support
of refering to channels by name.
While technically usable, it has never been properly supported in
dahdi-tools, as using it would require many changes at the Asterisk
level. Instead logical mapping was added at the kernel level.
Thus it seems that refering to DAHDI channels by name is not really used
by anyone, and therefore should probably be removed.
Change-Id: I7d50bbfd9d957586f5cd06570244ef87bd54b485
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the
form ice_blacklist = <subnet spec>, e.g. ice_blacklist =
192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay
discovery. This is useful for optimizing the ICE process where a system
has multiple host address ranges and/or physical interfaces and certain
of them are not expected to be used for RTP. Multiple ice_blacklist
configuration lines may be used. If left unconfigured, all discovered
host addresses are used, as per previous behavior.
Documention in rtp.conf.sample.
ASTERISK-26418 #close
Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9
We use a lot res_calendar, we are very happy with that, especially
because you use libical, the almost alone opensource library that
supports really ical format with all types of recurrency.
Nevertheless, some features are missed for our business use cases.
This first patch adds a new option in calendar.conf:
fetch_again_at_reload. Be my guest for a better name.
If it's true, when you'll launch "module reload res_calendar.so",
Asterisk will download again the calendar.
The business use case is that we have a WebUI with a scheduler planner,
we know when the calendars are modified.
For now, we need to define 1 minute of timeout to have a chance that
our user doesn't wait too long between the modification and the real
test. But it generates a lot of useless HTTP traffic.
ASTERISK-26422 #close
Change-Id: I384b02ebfa42b142bbbd5b7221458c7f4dee7077
The pooling, shared_connection, limit, and idlecheck options
are no longer used in res_odbc.
ASTERISK-26389
Change-Id: I2fde7b467d01f9d1c82cc0a339bb4f7e1dd6bbe6
* Make 'cdrzone=UTC' work properly.
* Fix the documentation of cdr_mysql.conf: it's cdrzone and not timezone
ASTERISK-26359 #close
Change-Id: I2a6f67b71bbbe77cac31a34d0bbfb1d67c933778
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
When 'tlsclientmethod' is not specified in sip.conf, chan_sip uses the OpenSSL
SSLv23_method. This was documented incorrectly in the file sip.conf.sample.
SSLv23_method got its name in the 90s. Today, with OpenSSL 1.0.2, this method
enables (just) the secure TLSv1.0 and TLSv1.2. Or stated differently, that
function should have been called 'secure_method' or 'automatic_method' back in
the 90s.
Consequently please, specify 'tlsclientmethod=tlsv1' in your sip.conf only if
you face a server which has problems like not falling back to TLSv1.0
automatically.
ASTERISK-24425
Change-Id: I502ce6146b4504cadfd3973af8d6ec3994f54fa3
contact_user, when specified on an endpoint, will override the user
portion of the Contact header on outgoing requests.
Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4
The Exchanging Device and Mailbox States could not working
if the Entity ID (EID) is not set manually and can't be obtained
from ethernet interface.
This patch replaces debug message to warning
and addes missing description about option 'entityid' to
asterisk.conf.sample.
With this patch the asterisk also:
(1) decline loading the modules which won't work without EID:
res_corosync and res_pjsip_publish_asterisk.
(2) warn if EID is empty on loading next modules:
pbx_dundi, res_xmpp
Starting with v197 systemd/udev will automatically assign "predictable"
names for all local Ethernet interfaces.
This patch also addes some new ethernet prefixes "eno" and "ens".
ASTERISK-26164 #close
Change-Id: I72d712f1ad5b6f64571bb179c5cb12461e7c58c6
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
On heavy loaded system with IMAP or DB storage,
'app_voicemail' taskprocessor queue could reach 500 scheduled tasks.
It could happen when the IMAP or DB server dies or is unreachable.
It could happen on startup when there are many (thousands)
realtime endpoints configured with unsolicited mwi.
If the taskprocessor queue reaches the high water level
then the alert is triggered and pjsip stops processing new requests
until the queue reaches the low water level to clear the alert.
This patch adds 2 new 'general' configuration options
to tune taskprocessor alert levels:
'tps_queue_high' - Taskprocessor high water alert trigger level.
'tps_queue_low' - Taskprocessor low water clear alert level
ASTERISK-26229 #close
Change-Id: I766294fbffedf64053c0d9ac0bedd3109f043ee8
The new option allows the channel driver's faxdetect option to timeout on
a call after the specified number of seconds into a call. The new feature
is disabled if the timeout is set to zero. The option is disabled by
default.
* Don't clear dsp_features after passing them to the dsp code in
my_pri_ss7_open_media(). We should still remember them especially for the
new faxdetect_timeout option.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Ieffd3fe788788d56282844774365546dce8ac810
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
Following the principle of least surprise, we should not be sending
massive numbers of PJSIP and RTCP HEP packets out into the ether to some
only-slightly-random IP address. Having 'enabled' set to 'no' in the
sample configuration file should prevent this from happening for those
who run 'make samples'.
ASTERISK-26159 #close
Change-Id: I1753a64ca83a3442a6ebdc31061f8185c062d9b1
This patch removes the following modules:
- pbx_functions: It never existed.
- res_pjsip_log_forwarder: It no longer exists.
- res_hep_pjsip: The base HEP module wasn't loaded, and most basic PBXs
aren't going to be installing HOMER
- res_pjsip_phoneprov_provider: The basic res_phoneprov module isn't
loaded, and we aren't configured to make use of the
module
Change-Id: Id91f68cae7c9c8c3d370029fe1268cb51e4ff5a5
