The find_table() functions NULL or a locked table pointer. We are
not consistently calling release_table() in failure paths.
Change-Id: I6f665b455799c84b036e5b34904b82b05eab9544
When a subscription was being recreated and the endpoint wasn't
found, we were trying to unref the endpoint. This was causing
FRACKs. Removed the unref.
ASTERISK-26823 #close
Change-Id: If86d2aecff8fe853c7f38a1bfde721fcef3cd164
This change fixes an assumption in res_pjsip that a contact will
always have a status. There is a race condition where this is
not true and would crash. The status will now be unknown when
this situation occurs.
ASTERISK-26623 #close
Change-Id: Id52d3ca4d788562d236da49990a319118f8d22b5
Outbound registration now subscribes to network change events
published by res_stun_monitor and refreshes all registrations
when an event happens.
The 'pjsip send (un)register' CLI commands were updated to accept
'*all' as an argument to operate on all registrations.
The 'PJSIP(Un)Register' AMI commands were also updated to
accept '*all'.
ASTERISK-26808 #close
Change-Id: Iad58a9e0aa5d340477fca200bf293187a6ca5a25
... and clean them both up on uninstall.
We've fixed the issue where 'make install' was installing to
/usr/lib on 64-bit systems that use /usr/lib64. Now we need
to clean up the remnants in /usr/lib.
* 'make install' now prints a warning if DESTDIR/ASTLIBDIR
contains 'lib64' and libasterisk* shared libraries or modules
are also found in DESTDIR/ASTLIBDIR with 'lib64' transformed
to 'lib'.
* 'make uninstall' ALWAYS cleans up both DESTDIR/ASTLIBDIR and
DESTDIR/ASTLIBDIR with 'lib64' transformed to 'lib'.
ASTERISK-26705
Change-Id: I6edddeb3c07a51e7c7ba7cac3c05e4bf3ec3f01f
The bridge_native_rtp module did not properly handle the case where
a smart bridge operation occurs while a channel is suspended. In this
scenario the module would incorrectly set up local or remote RTP
bridging despite the media having to flow through Asterisk. The remote
endpoint would see two media streams and experience wonky audio.
The module has been changed so that it ensures both channels are
not suspended when performing the native RTP bridging and this
requirement has been documented in the bridge technology.
ASTERISK-26781
Change-Id: Id4022d73ace837d4a293106445e3ade10dbc7c7c
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
This change introduces an ast_read_stream function and callback in
the channel technology which allows reading frames from all streams
and not just the default streams.
The stream number has also been added to frames. This is to allow the
case where frames are queued onto the channel instead of being read
directly from the driver.
This change does impose a restriction on reading though: a chain of
frames can only contain frames from the same stream.
ASTERISK-26816
Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
On some platforms a multiarch approach is used for libraries.
The build system does not take this into account and still
places libraries into the lib directory if no --libdir is
specified to configure. On initial startup this results in
libasteriskssl.so not being found, as it is not in the multiarch
lib directory. To make matters worse, options were being passed
to ldconfig on both Linux and FreeBSD that actually prevented
the rebuild of the cache.
* Fedora has a /usr/share/config.site that automatically tells
autoconf to use /usr/lib64 but CentOS does not. This logic was
copied to configure.ac and modified so systems like Ubuntu,
which still use /usr/lib for 64-bit systems, aren't affected.
Now that we have them in the correct directory...
In order for the system loader to find libasteriskssl and
libasteriskpj, one of 3 things has to happen...
- The linker cache must be rebuilt including the directory
where the libasterisk* libraries were installed. Only root
can rebuild the cache. This was busted.
- We have to link the asterisk binary with an rpath pointing
to the directrory where the libasterisk* libraries were
installed. This makes things very complicated and will happen
over the collective dead bodies of everyone who's had to
package a distribution with an rpath.
- Finally, you can start asterisk with LD_LIBRARY_PATH set to the
directrory where the libasterisk* libraries were installed.
There are no other options. So...
* The invokation of ldconfig has been moved from main/Makefile
to ASTTOPDIR/Makefile, the options have been removed, and
DESTDIR/ASTLIBDIR appended. If you aren't root, you will be
warned after the "Asterisk Installation Compete" banner that
you must re-run 'make install' as root, manually run
'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with
LD_LIBRARY_PATH.
ASTERISK-26705
Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982
* A missing AST_LIST_UNLOCK() in find_table()
* The ESCAPE_STRING() macro uses pgsqlConn under the hood and we were
not consistently locking before calling it.
* There were a handful of other places where pgsqlConn was accessed
directly without appropriate locking.
Change-Id: Iea63f0728f76985a01e95b9912c3c5c6065836ed
This change adds an ast_write_stream function which allows
writing a frame to a specific media stream. It also moves
ast_write() to using this underneath by writing media
frames provided to it to the default streams of the channel.
Existing functionality (such as audiohooks, framehooks, etc)
are limited to being applied to the default stream only.
Unit tests have also been added which test the behavior of
both non-multistream and multistream channels to confirm that
the write() and write_stream() callbacks are invoked
appropriately.
ASTERISK-26793
Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c
Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
Binaural synthesis is conducted at 48kHz.
For a conference, only one spatial representation is rendered.
The default rendering is applied for mono-capable channels.
ASTERISK-26292
Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf
The initial motivation for this patch was to properly handle memory
allocation failures - we weren't checking the return values from the
various LDAP library allocation functions.
In the process, because update_ldap() and update2_ldap() were
substantially the same code, they've been consolidated.
Change-Id: Iebcfe404177cc6860ee5087976fe97812221b822
Not sure if this is really a bug versus an improvement. I can see it being
viewed as a bug though by some.
The current build_tools/download_externals file depends on wget in order to
download external modules. The current build system is able to discover
which tool to use for fetching remote files - either wget or curl.
This patch takes advantage of this capability by modifying the two calls to
the wget binary to instead use what was discovered by the build system.
ASTERISK-26812 #close
Change-Id: If9411a2554f009274d377445613ae91192d948a1
The patterns provided by pbx_realtime were checked in the order in
which they were returned from the realtime backend. If there was
overlap between multiple patterns, the first one to correctly match was
chosen even though it may not have been the best match.
We now sort the patterns descending by their length and compare in that
order. There may be cases where this still results in a sub-optimal
match, but this patch should improve the overall behavior.
ASTERISK-18271 #close
Reported by: Charlie Smurthwaite
Change-Id: I56d9ac15810eb1775966b669c3028e32cc7bd809
The "core show channel" CLI command will now output the streams
present on the channel with their details.
ASTERISK-26811
Change-Id: I9c95b57aa09415005f0677a1949a0feb07e4987a
The DUNDi weight field is not always converted from network byte order
to host byte order. This can result in incorrect weight values and
incorrect selection of DUNDi destinations.
ASTERISK-18731 #close
Reported by: Peter Racz
Patches:
dundi_weight.patch (license #6290) patch uploaded by Peter Racz
Change-Id: Iba3e1a700ff539db57211a7bbc26f7b22ea9a1be
This establishes the basic allocation/destruction of an SDP state
object, plus some of the simpler getter methods involved. Subsequent
tasks will deal with adding a state machine, creating SDPs from
capabilities and options, and merging SDPs into a joint SDP.
Change-Id: Ie3757ce186f04b65e9d1883f5aace53f24e53709
ast_load_realtime_multientry() returns an ast_config structure whose
ast_categorys are keyed with the empty strings. Several modules were
giving semantic meaning to the category names causing problems at
runtime.
* app_directory: Treated the category name as the mailbox name, and
would fail to direct calls to the appropriate extension after an
entry was chosen.
* app_queue: Queues, queue members, and queue rules were all affected
and needed to be updated.
* pbx_realtime: Pattern matching would never succeed because the
extension entered by the user was always compared to the empty
string.
Change-Id: Ie7e44986344b0b76ea8f6ddb5879f5040c6ca8a7
