CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10651)
........
r81523 | qwell | 2007-09-05 10:14:30 -0500 (Wed, 05 Sep 2007) | 5 lines
Do not try to unregister a NULL channel tech.
Also changed load_module function to use defines rather than numbers for return values.
Issue 10651, patch by rbraun_proformatique, with additions by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79174 | file | 2007-08-13 11:18:04 -0300 (Mon, 13 Aug 2007) | 4 lines
(closes issue #10437)
Reported by: haklin
Don't set the callerid name and number a second time on a newly created channel. ast_channel_alloc itself already sets it and setting it twice would cause a memory leak.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r47380 | file | 2006-11-09 11:53:25 -0500 (Thu, 09 Nov 2006) | 10 lines
Merged revisions 47379 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r47379 | file | 2006-11-09 11:48:05 -0500 (Thu, 09 Nov 2006) | 2 lines
Don't include compiler.h on kernels 2.6.18 and higher as, well, it's apparently going to be removed. This should make all you FC6 fans happy as your Asterisk will now build without any mods.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44378 | kpfleming | 2006-10-04 14:47:22 -0500 (Wed, 04 Oct 2006) | 4 lines
update thread creation code a bit
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
now reports AST_MODULE_LOAD_DECLINE when loading if config file
is not there, also fixed an error in res_config_pgsql where it
had a non static function when it should.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@41633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r38903 | russell | 2006-08-05 01:07:39 -0400 (Sat, 05 Aug 2006) | 2 lines
suppress a compiler warning about the usage of a potentially uninitialized variable
........
r38904 | russell | 2006-08-05 01:08:50 -0400 (Sat, 05 Aug 2006) | 10 lines
Fix an issue that would cause a NewCallerID manager event to be generated
before the channel's NewChannel event. This was due to a somewhat recent
change that included using ast_set_callerid() where it wasn't before. This
function should not be used in the channel driver "new" functions.
(issue #7654, fixed by me)
Also, fix a couple minor bugs in usecount handling. chan_iax2 could have
increased the usecount but then returned an error. The place where chan_sip
increased the usecount did not call ast_update_usecount()
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@38905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r36725 | russell | 2006-07-03 00:19:09 -0400 (Mon, 03 Jul 2006) | 4 lines
use ast_set_callerid to be more consistent and to make sure that the
"callerid" option in the conf files is always handled the same way and sets ANI
(issue #7285, gkloepfer)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
update iax2_indicate to pass control frame payload to the connected channel
add an API call for sending an indication with payload, and use it for control frames with payload
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@26417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As partly documented in loader.c and include/asterisk/module.h,
modules are now expected to return all of their methods and flags
into a structure 'mod_data', and are normally loaded with RTLD_NOW
| RTLD_LOCAL, so symbols are resolved immediately and conflicts
should be less likely. Only in a small number of cases (res_*,
typically) modules are loaded RTLD_GLOBAL, so they can export
symbols.
The core of the change is only the two files loader.c and
include/asterisk/module.h, all the rest is simply adaptation of the
existing modules to the new API, a rather mechanical (but believe
me, time and finger-consuming!) process whose detail you can figure
out by svn diff'ing any single module.
Expect some minor compilation issue after this change, please
report it on mantis http://bugs.digium.com/view.php?id=6968
so we collect all the feedback in one place.
I am just sorry that this change missed SVN version number 20000!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@20003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
const-ify some more APIs
remove 'type' field from ast_channel, in favor of the one in the channel's tech structure
allow string field module users to specify the 'chunk size' for pool allocations
update chan_alsa to be compatible with recent const-ification patches
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@9060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Mark Michelson
Sean Bright
Tilghman Lesher
Michiel van Baak
Joshua Colp
Luigi Rizzo
Jason Parker
Kevin P. Fleming
Steve Murphy
Matt O'Gorman