* dahdi_chan_name
* dahdi_chan_name_len
* dahdi_chan_mode
* __manager_event
* dialed_interface_info
Added comment about __progname and environ being needed for FreeBSD to
prevent accidental removal in the future.
Change-Id: I3ae026bc541cd9cb572be2ffa95fc359547642b5
If the two formats on a channel are equal, we don't transcode and since
the generic plc needs slin to work, it doesn't get invoked.
* A new configuration option "genericplc_on_equal_codecs" was added
to the "plc" section of codecs.conf to allow generic packet loss
concealment even if no transcoding was originally needed.
Transcoding via SLIN is forced in this case.
ASTERISK-27743
Change-Id: I0577026a179dea34232e63123254b4e0508378f4
This change adds a property to RTP instances to indicate that
REMB support is enabled and that sending/receiving should be
passed through.
This also enables it on video RTP instances in PJSIP if
WebRTC support is enabled.
Finally the goog-remb extension is added to the SDP using
the rtcp-fb attribute to indicate our support for it.
Details about REMB can be found on the draft document for it:
https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
Change-Id: I1902dda1c0882bd1a0d71b2f120684b44b97e789
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
This replaces AST_INLINE_API allocators in utils.h with real functions
implemented in astmm.c. Associated macro's are also moved from utils.h
to astmm.h.
Remove menuselect conflicts between MALLOC_DEBUG and DEBUG_CHAOS as they
can now be combined.
This has multiple benefits:
* Simplifies asterisk/utils.h by removing inline functions and use of
the logger.
* Removal of these inline functions decreases size of Asterisk and
module binaries by 1% or more.
* Puts memory management functions together with and without
MALLOC_DEBUG enabled, simplifying management of the code.
* Enables DEBUG_CHAOS for ASTMM_REDIRECT and bundled pjproject.
Change-Id: If9df4377f74bdbb627461b27a473123e05525887
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
GCC documentation states that when __attribute__((malloc)) is used it
should not return storage which contains any valid pointers. It
specifically mentions that realloc functions should not have the malloc
attribute, but this also means that complex initializers which could
contain initialized pointers should not use this attribute.
Change-Id: If507f33ffb3ca3b83b702196eb0e8215d27fc7d2
This causes MALLOC_DEBUG reporting to be slightly different, calls which
cause additional memory pools to be allocated now report the callers
location rather than the location which originally allocated the
string field structure. This reduces storage needed by string fields
and allows MALLOC_DEBUG to identify the source of additional allocations
rather than obscuring it by reporting the original allocation caller.
Change-Id: Idd18e6639a87ab862079b580c114d90361412289
When built-in components of Asterisk fail to start they cause the
Asterisk startup to abort. In these cases only the most critical
cleanup should be performed - closing databases and terminating
proceses. These cleanups are registered using ast_register_atexit, all
other cleanups should not be run during startup abort.
The main reason for this change is that these cleanup procedures are
untestable from the partially initialized states, if they fail it could
prevent us from ever running the critical cleanup with ast_run_atexits.
Create separate initialization for dns_core.c to be run unconditionally
during startup instead of being initialized by the first dns resolver to
be registered. This ensures that 'sched' is initialized before it can be
potentially used.
Replace ast_register_atexit with ast_register_cleanup in media_cache.c.
There is no reason for this cleanup to happen unconditionally.
Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3
In NetBSD, PortAudio 1 is still the default version. PortAudio 2 can be
installed side by side but gets placed in a 'portaudio2' subdirectory. To
find PortAudio 2 even in a subdirectory, the tool pkg-config is queried via
AST_PKG_CONFIG_CHECK. For those platforms, which do not list PowerAudio 2
via pkg-config, the previous check remains and is executed thereafter.
ASTERISK-27721
Change-Id: I4175500126909ad1b181fff8e11bb4a3a6ae4fa9
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
This allows asterisk to be compiled with MALLOC_DEBUG to load modules
built without MALLOC_DEBUG. Now pre-compiled third-party modules will
still work regardless of MALLOC_DEBUG being enabled or not.
Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
A couple of additional properties are needed in rtp_engine to enable
support for packet retransmission: AST_RTP_PROPERTY_RETRANS_RECV and
AST_RTP_PROPERTY_RETRANS_SEND. These will both be enabled automatically
if an endpoint has the webrtc option enabled. While this adds no
functionality currently, it will serve as a building block for future
changes for RTP retransmission support.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
Change-Id: Ic598acd042a045f9d10e5bdccb66f4efc9e587cc
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
Create ast_atomic macro's to provide a consistent interface to the
common functionality of __atomic and __sync built-in functions.
ASTERISK-27619
Change-Id: Ieba3f81832a0e25c5725ea067e5d6f742d33eb5b
In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
This addresses all performance issues with 'module load' completion. In
addition to using ast_cli_completion_add we stop using libedit's
filename_completion_function, instead using ast_file_read_dir. This
ensures all results are produced from a single call to opendir.
Change-Id: I8bf51ffaa7ef1606f3bd1b5bb13f1905d72c6134
Because of a copy-and-paste error, the Asterisk project was using __typeof
instead of typeof. It works because typeof, __typeof, and __typeof__ are
supported by GCC, but here the escaped variant was not intended. Therefore,
for consistence, we change this to typeof.
Change-Id: I2a962c3e596e882f691a19345445b14571a5f07c
This change causes the configure script to throw an error if neither
__sync nor __atomic builtin functions are available.
ASTERISK-27619
Change-Id: Ie01a281e0f5c41dfeeb5f250c1ccea8752f56ef9
Add a check to configure.ac for __atomic_fetch_add support. If found
use the __atomic built-in operators for ast_atomic_dec_and_test and
ast_atomic_fetchadd_int.
ASTERISK~27619
Change-Id: I65b4feb02bae368904ed0fb03f585c05f50a690e
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
* Copy more than one character at a time when there is nothing to
substitute.
* Fix off by one error if a '}' or ']' is missing.
* Eliminated the requirement that the "used" parameter had to point to a
variable. The current callers were always declaring a variable to meet
the requirement and discarding the value put into that variable. Now it
can be NULL.
* In ast_str_substitute_variables_full() fixed using the bogus channel to
evaluate a function. We were not using the bogus channel we just created
to help evaluate a subexpression.
Change-Id: Ia83d99f4f16abe47f329eb39b6ff2013ae7c9854
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
ast_vector_string_split:
This function will add items to an ast_vector_string by splitting values
of a string buffer. Items are appended to the vector in the order they
are found.
ast_vector_const_string:
A vector of 'const char *'.
Change-Id: I1bf02a1efeb2baeea11c59c557d39dd1197494d7
This function returns NULL if the module in question is not running. I
did not change ast_module_ref as most callers do not check the result
and they always call ast_module_unref.
Make use of this function when running registered items from:
* app_stack API's
* bridge technologies
* CLI commands
* File formats
* Manager Actions
* RTP engines
* Sorcery Wizards
* Timing Interfaces
* Translators
* AGI Commands
* Fax Technologies
ASTERISK-20346 #close
Change-Id: Ia16fd28e188b2fc0b9d18b8a5d9cacc31df73fcc
Add a reference to the calling module when it is active to protect
access to datastore->info. Remove module references done by
func_periodic_hook as the datastore now handles it.
ASTERISK-25128 #close
Change-Id: I8357a3711e77591d0d1dd8ab4211a7eedd782c89
This is the old ASTOBJ macro's which are no longer used except by the
deprecated netsock.c. Move it to the chan_iax2 include folder so it
does not get used elsewhere.
Change-Id: I7e4ae96678b36b9f41d3cae14b167f110eb5d349
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
This moves netsock.c / netsock.h to the chan_iax2 module. netsock.h has
been marked deprecated since 13.0.0, chan_iax2 is the only remaining
user.
Change-Id: I28c6578043bac18de5ea608e136acec4f83d5dd3
ACO uses regex in many situations where it is completely unneeded. In
some cases this doubles the total processing performed by
aco_process_config.
* Create ACO_IGNORE category type for use in place of skip_category
regex source string.
* Create additional aco_category_op values to allow specifying category
filter using either a single plain string or a NULL terminated array
of plain strings.
* Create ACO_PREFIX to allow matching option names to case insensitive
prefixes.
Change-Id: I66a920dcd8e2b0301f73f968016440a985e72821
This is needed for future changes which will require being able to
process the load priority out of order.
Change-Id: Ia23421197f09789940510b03ebbbf3bf24d51bea
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
A couple of places were setting the status to "UNKNOWN" when qualifies were
being disabled. Instead this should be set to the "CREATED" status that
represents when a contact is given (uri available), but the qualify frequency
is set to zero so we don't know the status.
This patch updates the relevant places with "CREATED". It also updates the
"CREATED" status description (value shown in CLI/AMI/ARI output) to a value
of "NonQualified"/"NonQual" as this description is hopefully less confusing.
ASTERISK-27467
Change-Id: Id67509d25df92a72eb3683720ad2a95a27b50c89
Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.
This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.
Related to ASTERISK~26806, but does not completely resolve it.
Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
The SuccessfulAuth using_password field was declared as a pointer to a
uint32_t when the field was later read as a uint32_t value. This resulted
in unnecessary casts and a non-portable field value reinterpret in
main/security_events.c:add_json_object(). i.e., It would work on a 32 bit
architecture but not on a 64 bit big endian architecture.
Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935
Previous commits maintained compatibility with older remote console
clients as well as maintaining all API's.
Remove the following compatibility code:
* ast_cli_generatornummatches.
* Remote command "_command nummatches".
* Sorting / duplicate removal by remote console.
Change-Id: I59e6ce94fa57ae564888442049695f7e46746437
Some completion generators are very inefficent due to the way CLI
requests matches one at a time. ast_cli_completion_add can be called
multiple times during one invokation of a CLI generator to add all
results without having to reinitialize the search state for each match.
Change-Id: I73d26d270bbbe1e3e6390799cfc1b639e39cceec
The ability to add to localized storage cannot be supported by
ast_cli_generator. The only calls to ast_cli_generator should be by
functions that need to proxy the CLI generator, for example 'cli check
permissions' or 'core show help'.
* ast_cli_generatornummatches now retrieves the vector of matches and
reports the number of elements (not including 'best' match).
* test_substitution retrieves and iterates the vector.
Change-Id: I8cd6b93905363cf7a33a2d2b0e2a8f8446d9f248
This adds the printf attribute and changes 'fmt' from 'const void *' to
'const char *'. This resolves a warning from some compiler for
vsnprintf needing a literal string for format.
Change-Id: I71c33a8262590042ee451e1146760c10bb22fb78
Previously for PJSIP the local address of WebSocket connections
was set to the remote address. For logging purposes this is
not particularly useful.
The WebSocket API has been extended to allow the local
address to be queried and this is used in PJSIP to set the
local address to the correct value.
The PJSIP HEP support has also been tweaked so that reliable
transports always use the local address on the transport
and do not try to (wrongly) guess. As they are connection
based it is impossible for the source to be anything else.
ASTERISK-26758
ASTERISK-27363
Change-Id: Icd305fd038ad755e2682ab2786e381f6bf29e8ca
Some consumers of the sorcery API use ast_sorcery_retrieve_by_regex
only so that they can anchor the potential match as a prefix and not
because they truly need regular expressions.
Rather than using regular expressions for simple prefix lookups, add
a new operation - ast_sorcery_retrieve_by_prefix - that does them.
Change-Id: I56f4e20ba1154bd52281f995c27a429a854f6a79
This is a rewrite of ast_cli_completion_matches using a vector to build
the list. The original function calls the vector version, NULL
terminates the vector and extracts the elements array.
One change in behavior the results are now sorted and deduplicated. This
will solve bugs where some duplicate checking was done before the list
was sorted.
Change-Id: Iede20c5b4d965fa5ec71fda136ce9425eeb69519
Jenkins2
Corey Farrell
Joshua Colp
George Joseph
Alexander Traud
Richard Mudgett
Ben Ford
Sean Bright
Kevin Harwell