In the event that the desired extension already exists,
ast_add_extension2_lockopt() will free the 'data' it is passed before
returning an error, so we should not be freeing it ourselves.
Additionally, there were two places where ast_add_extension2_lockopt()
could return an error without also freeing the 'data' pointer, so we
add that.
ASTERISK-29097 #close
Change-Id: I904707aae55169feda050a5ed7c6793b53fe6eae
When fixing issues uncovered by GCC10 a copy of the parker UUID
was removed accidentally. This change restores it so that the
subscription has the data it needs.
ASTERISK-29042
Change-Id: I7d396a14ea648bd26d3c363dd78e78bd386b544a
This patch fixes a few compile warnings/errors that now occur when using gcc
10+.
Also, the Makefile.rules check to turn off partial inlining in gcc versions
greater or equal to 8.2.1 had a bug where it only it only checked against
versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
any version above the specified version is correctly compared.
Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
There exists a scenario where a thread can hold a lock on the
channels container while trying to lock a bridge. At the same
time another thread can hold the lock for said bridge while
attempting to retrieve a channel. This causes a deadlock.
This change fixes this scenario by retrieving a channel snapshot
instead of a channel, as information present in the snapshot
is all that is needed.
ASTERISK-28616
Change-Id: I68ceb1d62c7378addcd286e21be08a660a7cecf2
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
This commit adds a new function to res_parking.
This function, PARK_GET_CHANNEL allows the retrieval
of the channel name of the channel occupying the parking slot.
ASTERISK-22825 #close
Change-Id: Idba6ae55b8a53f734238cb3d995cedb95c0e7b74
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
Adds the ability for extensions to be registered to include filename and
line number so that dialplan show output can show the filename and line
number of a config file responsible for generating a given extension.
This only affects config modules that are written to use the new extension
registering functions. In this patch, that only includes pbx_config, so
extensions registered in extensions.conf and any included extension will
be shown in this manner. Extensions registered in this manner will show
the filename and line number *instead* of the registrar.
ASTERISK-26658 #close
Reported by: Jonathan R. Rose
Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
Blind transfers to a recognized parking extension need to use the parker's
channel variable values to create the dynamic parking lot. This is
because there is always only one parker while the parkee may actually be a
multi-party bridge. A multi-party bridge can never supply the needed
channel variables to create the dynamic parking lot. In the multi-party
bridge blind transfer scenario, the parker's CHANNEL(parkinglot) value and
channel variables are inherited by the local channel used to park the
bridge.
* In park_common_setup(), make use the parker instead of the parkee to
supply the dynamic parking lot channel variable values. In all but one
case, the parkee is the same as the parker. However, in the recognized
parking extension blind transfer scenario for a two party bridge they are
different channels. For consistency, we need to use the parker channel.
* In park_local_transfer(), pass the CHANNEL(parkinglot) value to the
local channel when blind transferring a multi-party bridge to a recognized
parking extension.
* When a local channel starts a call, the Local;2 side needs to inherit
the CHANNEL(parkinglot) value from Local;1.
The DTMF one-touch parking case wasn't even trying to create dynamic
parking lots before it aborted the attempt.
* In parking_park_call(), add missing code to create a dynamic parking
lot.
A DTMF bridge hook is documented as returning -1 to remove the hook.
Though the hook caller is really coded to accept non-zero. See the
ast_bridge_hook_callback typedef.
* In feature_park_call(), don't remove the DTMF one-touch parking hook
because of an error.
ASTERISK-24605 #close
Reported by: Philip Correia
Patches:
call_park.patch (license #6672) patch uploaded by Philip Correia
Change-Id: I221d3a8fcc181877a1158d17004474d35d8016c9
res/parking/parking_applications.c:
* Add malloc fail checks in setup_park_common_datastore().
* Fix playing parking failed announcement to only happen on non-blind
transfers in park_app_exec(). It could never go out before because a test
was provedly always false.
res/parking/parking_bridge.c:
* Fix NULL tolerance in generate_parked_user() because
bridge_parking_push() can theoretically pass a NULL parker channel if the
parker channel went away for some reason.
* Clarify some weird code dealing with blind_transfer in
bridge_parking_push().
res/parking/parking_bridge_features.c:
* Made park_local_transfer() set BLINDTRANSFER on the Local;1 channel
which will be bulk copied to the Local;2 channel on the subsequent
ast_call(). The additional advantage is if the parker channel has the
BLINDTRANSFER and ATTENDEDTRANSFER variables set they are now guaranteed
to be overridden.
res/parking/parking_manager.c:
* Fix AMI Park action input range checking of the Timeout header in
manager_park().
* Reduced locking scope to where needed in manager_park().
res/res_parking.c:
* Fix some off nominal missing unlocks by eliminating the returns.
Change-Id: Ib64945bc285acb05a306dc12e6f16854898915ca
In Asterisk 11, the announcer channel would receive channel variables
from the channel being parked by means of normal channel inheritance.
This functionality was lost during the big res_parking project in
Asterisk 12. This patch restores that functionality.
ASTERISK-25369 #close
Review: https://gerrit.asterisk.org/#/c/1180/
Change-Id: Ie47e618330114ad2ea91e2edcef1cb6f341eed6e
setup_park_common_datastore() was assuming that a non-NULL string returned
for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty
strings. Things got crashy as a result.
* Made setup_park_common_datastore() treat the channel variable values the
same whether they are NULL or empty for ATTENDEDTRANSFER and
BLINDTRANSFER.
ASTERISK-25254 #close
Reported by: Richard Mudgett
Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2
This event was added some time ago in order to clarify when a channel
took the place of another channel in a parking lot. However, there was
no XML documentation added for the event. This patch adds the XML
documentation.
ASTERISK-24900 #close
Reported by Rusty Newton
Change-Id: I4cfe7777c4b94bbff91c9221c6096a7a02a92eac
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
This is a change to align behavior with that of Asterisk 11 and previous versions.
In those versions, if a parked call were retrieved, and the call ended, the parked
call retriever would be hung up after the ParkedCall application ran. Prior to this
patch, in Asterisk 13, the same situation would result in the parked call retriever
falling through to additional priorities in the extension where the ParkedCall
application was called. With this patch, the behavior between Asterisk 11 and 13
aligns.
ASTERISK-24899 #close
Reported by Malcolm Davenport
Patches:
ASTERISK-24899.patch uploaded by Mark Michelson(license #5049)
........
Merged revisions 434022 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is currently a race condition when unloading the res_parking
module. Depending on the will of the universe the subscription
invocation may occur AFTER the module is unloaded. This is because
the module does NOT use stasis_unsubscribe_and_join when terminating
the subscription. It merely uses stasis_unsubscribe.
This change makes it use stasis_unsubscribe_and_join which is documented
for usage in this exact scenario.
AST-1520 #close
Review: https://reviewboard.asterisk.org/r/4375/
........
Merged revisions 431114 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses some aesthetic issues in Asterisk. These are all just
minor tweaks to improve the look of the CLI when used in a variety of
settings. Specifically:
* A number of chatty verbose messages were removed or demoted to DEBUG
messages. Verbose messages with a verbosity level of 5 or higher were -
if kept as verbose messages - demoted to level 4. Several messages
that were emitted at verbose level 3 were demoted to 4, as announcement
of dialplan applications being executed occur at level 3 (and so the
effects of those applications should generally be less).
* Some verbose messages that only appear when their respective 'debug'
options are enabled were bumped up to always be displayed.
* Prefix/timestamping of verbose messages were moved to the verboser
handlers. This was done to prevent duplication of prefixes when the
timestamp option (-T) is used with the CLI.
* Verbose magic is removed from messages before being emitted to
non-verboser handlers. This prevents the magic in multi-line verbose
messages (such as SIP debug traces or the output of DumpChan) from
being written to files.
* _Slightly_ better support for the "light background" option (-W) was
added. This includes using ast_term_quit in the output of XML
documentation help, as well as changing the "Asterisk Ready" prompt to
bright green on the default background (which stands a better chance of
being displayed properly than bright white).
Review: https://reviewboard.asterisk.org/r/3547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unused RAII_VAR() declarations. The compiler cannot catch these
because the cleanup function "references" the unused variable. Some
actually allocated and released resources that were never used.
* Fixed some whitespace issues in stasis_bridges.c.
........
Merged revisions 412399 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Use ast_bridge_channel_lock()/ast_bridge_channel_unlock() instead of
ao2_lock()/ao2_unlock() for struct ast_bridge_channel variables.
* Use ast_copy_string() instead of inlining it.
* Remove an already done TODO comment.
* Some whitespace tweaks.
........
Merged revisions 411638 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright
Joshua C. Colp
Kevin Harwell
Joshua Colp
George Joseph
Joshua Elson
Corey Farrell
Jonathan R. Rose
zuul
Richard Mudgett
Philip Correia
Jonathan Rose
Matt Jordan
Mark Michelson
Kinsey Moore