https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279227 | rmudgett | 2010-07-23 17:20:47 -0500 (Fri, 23 Jul 2010) | 21 lines
Merged revisions 279207 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279207 | rmudgett | 2010-07-23 17:11:23 -0500 (Fri, 23 Jul 2010) | 14 lines
Merged revisions 279206 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279206 | rmudgett | 2010-07-23 16:56:44 -0500 (Fri, 23 Jul 2010) | 7 lines
SIP promiscuous redirect could fail to dial the redirect.
The ast_channel was created with one variable to ast_request() but the
call to ast_call() that initiates the outgoing call was using a different
variable. The two variables are not equivalent if the call_forward string
included a channel technology specifier. e.g., SIP/200
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, parse the useropts properly, when retrieving from realtime, and add them
to the existing flags.
(closes issue #17502)
Reported by: kenji
Patches:
20100720__issue17502.diff.txt uploaded by tilghman (license 14)
Tested by: kenji
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Just say the number of seconds (after minutes) rather than doing some incorrect
calculation with respect to minutes.
(closes issue #17498)
Reported by: corruptor
Patches:
holdesecs_bug.diff uploaded by corruptor (license 253)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277182 | pabelanger | 2010-07-16 13:10:36 -0400 (Fri, 16 Jul 2010) | 8 lines
Total analysis time error with SIP and silence suppression
When using app_amd with SIP providers that have silence
suppression on, the iTotalTime count increases exponentially.
(closes issue #17656)
Reported by: juls
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275773 | jpeeler | 2010-07-12 15:34:51 -0500 (Mon, 12 Jul 2010) | 12 lines
Make user removals and traversals thread safe in meetme.
Race conditions present in meetme involving the user list where a lack of
locking has the potential for a user to be removed during a traversal or as in
the case of the reporter after checking if the list is empty could cause a
crash. Fixing this was done by convering the userlist to an ao2 container.
(closes issue #17390)
Reported by: Vince
Review: https://reviewboard.asterisk.org/r/746/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273474 | jpeeler | 2010-07-01 15:19:16 -0500 (Thu, 01 Jul 2010) | 14 lines
Allow admin user to join conference without using admin mode and no user pin.
Configuring the conference in meetme.conf like the following:
conf => 2345,,6666
did not prompt for pin when used without admin mode. This meant that the
conference could not be joined as an admin even if the user knew the correct
pin. The original bug report was submitted claiming that the blank user pin
should deny entry into the conference. I think a better way to handle this
would be with a feature enhancement that used the following syntax:
conf => 2345,X,6666 - where X denotes no acceptable pin allowed
(closes issue #15704)
Reported by: modelnine
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273354 | jpeeler | 2010-07-01 10:05:43 -0500 (Thu, 01 Jul 2010) | 12 lines
Ensure channel placed in meetme in ringing state is properly hung up.
An outgoing channel placed in meetme while still ringing which was then hung up
would not exit meetme and the channel was not properly destroyed. Specifically
checking for this scenario by looking at the appropriate control frames resolves
the issue.
(closes issue #15871)
Reported by: Ivan
Patches:
meetme_congestion_trunk_v2.patch uploaded by Ivan (license 229)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
This version of the patch only adds AgentComplete for attended transfers. It was already present for blind transfers.
........
r272367 | mnicholson | 2010-06-23 17:33:51 -0500 (Wed, 23 Jun 2010) | 8 lines
Send AgentComplete manager events in the event of blind and attended transfers.
(closes issue #16819)
Reported by: elbriga
Patches:
app_queue.diff uploaded by elbriga (license 482)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r272255 | pabelanger | 2010-06-23 16:57:01 -0400 (Wed, 23 Jun 2010) | 12 lines
First caller into a dynamic conference now enter pin once.
If MeetMe is configured to use dynamic conference
numbers, then the first caller (which creates the
conference) had to enter the PIN number twice.
(closes issue #15878)
Reported by: shawkris
Patches:
issue15878.patch uploaded by pabelanger (license 224)
Tested by: pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Even if there are no stations or trunks defined, we need to start the sla
thread to make sure we get the reload event. Also, when doing a reload we need
to remove the existing trunks and stations or they end up hanging around.
(closes issue #16818)
Reported by: mbonin
Patches:
sla_reload.patch uploaded by twilson (license 396)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch supplied by reporter was modified to use autoservice and
prevent a potential channel ref leak but is otherwise as the
reporter uploaded it.
(closes issue #17182)
Reported by: rcasas
Patches:
app_senddtmf.c.patch_trunk uploaded by rcasas (license 641)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265089 | mmichelson | 2010-05-21 15:59:14 -0500 (Fri, 21 May 2010) | 8 lines
Don't hang up on a queue caller if the file we attempt to play does not exist.
This also fixes a documentation mistake in file.h that made my original attempt
to correct this problem not work correctly.
(closes issue #17061)
Reported by: RoadKill
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The connected line update macro would not get run if the connected line
number string was empty. The number could be empty if the connected line
update did not update a number but the name. It should be run if there
was an AST_CONTROL_CONNECTED_LINE frame received for pending dials and
queues.
Renamed and added some more comments for some confusing identifiers
directly connected to the related code.
Also fixed a memory leak in app_queue.
Review: https://reviewboard.asterisk.org/r/669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263769 | jpeeler | 2010-05-18 13:54:58 -0500 (Tue, 18 May 2010) | 10 lines
Modify directory name reading to be interrupted with operator or pound escape.
In the case of accidentally entering the wrong first three letters for the
reading, users could be very frustrated if the name listing is very long. This
allows interrupting the reading by pressing 0 or #. 0 will attempt to execute
a configured operator (o) extension and # will exit and proceed in the
dialplan.
ABE-2200
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Tilghman Lesher
Jeff Peeler
Paul Belanger
Olle Johansson
TransNexus OSP Development
Eliel C. Sardanons
Russell Bryant
Matthew Nicholson
Mark Michelson
Tzafrir Cohen
Terry Wilson
Leif Madsen