A bug in GCC causes TEST_CEL to return failure under the following
conditions:
1. TEST_FRAMEWORK on
2. DONT_OPTIMIZE off
3. Fedora and Ubuntu
4. GCC 8.2.1
5. Test name: test_cel_dial_pickup
6. There must exist a certain combination of multithreading.
The bug affects arithmetic calculations when the optimization level
is bigger than O1 and the -fpartial-inline flag is on. Provided these
conditions, function ast_str_to_lower() fails to convert to lower case
due to said function being of type force_inline. The solution is to
remove the "force_inline" type declaration from function ast_str_to_lower()
Change-Id: Ied32e0071f12ed9d5f3b4cdd878b2532a1c769d7
Previously both AMI and ARI used a default route on
their stasis message router to handle some of the
messages for publishing out their respective
connection. This caused messages to be given to
their subscription that could not be formatted
into AMI or JSON.
This change adds an API call to the stasis message
router which allows a default route to be set as well
as formatters that the default route is expecting.
This allows both AMI and ARI to specify that their
default route only wants messages of their given
formatter. By doing so stasis can more intelligently
filter at publishing time so that they do not receive
messages which will not be turned into AMI or JSON.
ASTERISK-28244
Change-Id: I65272819a53ce99f869181d1d370da559a7d1703
During Bridging of two channels if masquerade operation is performed on a
channel (clone channel) which was created with endpoint details
(ast_channel_alloc_with_endpoint()) and the original channel which is created
without endpoint details (ast_channel_alloc()) then both the channels must
exchange their endpoint details or else after masquerade when clone channel
is being destroyed the endpoint cleanup callbacks will be destroyed too and
after call completion unique_id of original channel will still be there in
ast_endpoint structure's channel_ids container.
ASTERISK-28197
Change-Id: I97ce73da390af20fd082fb09d722a6fe9cb2f39d
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
This prevents use-after-scope issues when unwinding the stack,
which happens in reverse order. The varname variable needs to
remain alive for the destruction to be able to access it.
Issue was found using clang + address-sanitizer.
ASTERISK-28232 #close
Change-Id: I00811c34ae910836a5fb6d22304528aef92624db
This change adds statistics gathering to Stasis topics,
subscriptions, and message types. These can be viewed using
CLI commands and provide insight into how Stasis is used
and how long certain operations take to execute.
These are only available when Asterisk is compiled in
developer mode and do not have any impact under normal
operation.
ASTERISK-28117
Change-Id: I94411b53767f89ee01714daaecf0c2f1666e863f
Some platforms provide an implementation of socket() and pipe2() that allow the
caller to specify that the resulting file descriptors should be non-blocking.
Using these allows us to potentially elide 3 calls into 1 by avoiding extraneous
calls to fcntl() to set the O_NONBLOCK flag afterwards.
In passing, change ast_alertpipe_init() to use pipe2() directly instead of the
wrapper if it is available.
Change-Id: I3ebe654fb549587537161506c6c950f4ab298bb0
A subscriber can now indicate that it only wants messages
that have formatters of a specific type. For instance,
manager can indicate that it only wants messages that have a
"to_ami" formatter. You can combine this with the existing
filter for message type to get only messages with specific
formatters or messages of specific types.
ASTERISK-28186
Change-Id: Ifdb7a222a73b6b56c6bb9e4ee93dc8a394a5494c
We've had multiple opportunities where Richard Mudgett's
malloc_trim patch has been useful. Let's get it
pushed up to gerrit and merged.
Since malloc_trim is only available in libc, an entry is
added to configure.ac to create a definition for
HAVE_MALLOC_TRIM.
Change-Id: Ia38308c550149d9d6eae4ca414a649957de9700c
* The bridging core no longer uses the stasis cache for bridge
snapshots. The latest bridge snapshot is now stored on the
ast_bridge structure itself.
* The following APIs are no longer available since the stasis cache
is no longer used:
ast_bridge_topic_cached()
ast_bridge_topic_all_cached()
* A topic pool is now used for individual bridge topics.
* The ast_bridge_cache() function was removed since there's no
longer a separate container of snapshots.
* A new function "ast_bridges()" was created to retrieve the
container of all bridges. Users formerly calling
ast_bridge_cache() can use the new function to iterate over
bridges and retrieve the latest snapshot directly from the
bridge.
* The ast_bridge_snapshot_get_latest() function was renamed to
ast_bridge_get_snapshot_by_uniqueid().
* A new function "ast_bridge_get_snapshot()" was created to retrieve
the bridge snapshot directly from the bridge structure.
* The ast_bridge_topic_all() function now returns a normal topic
not a cached one so you can't use stasis cache functions on it
either.
* The ast_bridge_snapshot_type() stasis message now has the
ast_bridge_snapshot_update structure as it's data. It contains
the last snapshot and the new one.
* cdr, cel, manager and ari have been updated to use the new
arrangement.
Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
Channels no longer use the Stasis cache for channel snapshots. Instead
they are stored in a hash table in stasis_channels which reduces the
number of Stasis messages created and allows better storage.
As a result the following APIs are no longer available since the stasis
cache is no longer used:
ast_channel_topic_cached()
ast_channel_topic_all_cached()
The ast_channel_cache_all() and ast_channel_cache_by_name() functions
now return an ao2_container of ast_channel_snapshots rather than
a container of stasis_messages therefore you can't (and don't need
to) call stasis_cache functions on it.
The ast_channel_topic_all() function now returns a normal topic not
a cached one so you can't use stasis cache functions on it either.
The ast_channel_snapshot_type() stasis message now has the
ast_channel_snapshot_update structure as it's data. It contains the
last snapshot and the new one.
ast_channel_snapshot_get_latest() still returns the latest snapshot.
The latest snapshot is now stored on the channel itself to eliminate
cache hits when Stasis messages that have the snapshot as a payload
are created.
ASTERISK-28102
Change-Id: I9334febff60a82d7c39703e49059fa3a68825786
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
Create ao2_container_dup_weakproxy_objs to perform a similar function to
ao2_container_dup. This function expects the source container to have
weakproxy objects, inserts the associated non-weak objects into the
destination container. Orphaned weakproxy objects are ignored.
Create test for this new function and for ao2_weakproxy_find.
Change-Id: I898387f058057e08696fe9070f8cd94ef3a27482
We've been seeing crashes in libbfd when we attempt to generate
a stack trace from multiple threads. It turns out that libbfd
is NOT thread-safe. It can cache the bfd structure and give it to
multiple threads without protecting itself. To get around this,
we've added a global mutex around the bfd functions and also have
refactored the use of those functions to be more efficient and
to provide more information about inlined functions.
Also added a few more tests to test_pbx.c. One just calls
ast_assert() and the other calls ast_log_backtrace(). Neither are
run by default.
WARNING: This change necessitated changing the return value of
ast_bt_get_symbols() from an array of strings to a VECTOR of
strings. However, the use of this function outside Asterisk is not
likely.
ASTERISK-28140
Change-Id: I79d02862ddaa2423a0809caa4b3b85c128131621
When a subscribe or unsubscribe occurs a message is published
containing this information. This change makes it so that the
message no longer uses stringfields or a lock, as both are not
really needed for the message.
Change-Id: I3f4831931d79f94fd979baf48048738df5dc1632
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
As mentioned in the comment I've added in the code there is no
ability to unsubscribe all subscribers from a topic and explicitly
destroy it. This is not currently a problem as we have two types of
topics:
Long lived topics which exist for the lifetime of the system.
Ephemeral topics which feed a long lived topic.
In the case of the ephemeral topics there is no subscriber which does
not have its lifetime managed by the same entity that has created
the topic. This ensures that when the topic is being unreferenced the
subscribers are also unsubscribed and destroyed, allowing the topic
to ultimately be destroyed as well.
Change-Id: Ic5e244da7b16b1895ba1fc5ece481ebba5809c9a
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
Add a new global flag to res_pjsip to allow the callerid to be used
as the username in the contact header. This allows chan_pjsip to have
the same behavour as chan_sip
ASTERISK-28087 #close
Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95
Adding the "label" attribute used for participant info correlation
was previously done in app_confbridge but it wasn't working
correctly because it didn't have knowledge about which video
streams belonged to which channel. Only bridge_softmix has that
data so now it's set when the bridge topology is changed.
ASTERISK-28107
Change-Id: Ieddeca5799d710cad083af3fcc3e677fa2a2a499
This change implements a few different generic things which were brought
on by Google Voice SIP.
1. The concept of flow transports have been introduced. These are
configurable transports in pjsip.conf which can be used to reference a
flow of signaling to a target. These have runtime configuration that can
be changed by the signaling itself (such as Service-Routes and
P-Preferred-Identity). When used these guarantee an individual connection
(in the case of TCP or TLS) even if multiple flow transports exist to the
same target.
2. Service-Routes (RFC 3608) support has been added to the outbound
registration module which when received will be stored on the flow
transport and used for requests referencing it.
3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been
added to the outbound registration module. If a P-Associated-URI header
is received it will be used on requests as the P-Preferred-Identity.
4. Configurable outbound extension support has been added to the outbound
registration module. When set the extension will be placed in the
Supported header.
5. Header parameters can now be configured on an outbound registration
which will be placed in the Contact header.
6. Google specific OAuth / Bearer token authentication
(draft-ietf-sipcore-sip-authn-02) has been added to the outbound
registration module.
All functionality changes are controlled by pjsip.conf configuration
options and do not affect non-configured pjsip endpoints otherwise.
ASTERISK-27971 #close
Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58
These macros have been documented as legacy for a long time but are
still used in new code because they exist. Remove all references to:
* ao2_container_alloc_options
* ao2_t_container_alloc_options
* ao2_t_container_alloc
These macro's are also removed. Only ao2_container_alloc remains due to
it's use in over 100 places.
Change-Id: I1a26258b5bf3deb081aaeed11a0baa175c933c7a
__ast_mutex_logger used the variable `canlog` without accepting it as a
argument. Replace with internal macro `log_mutex_error` which takes
canlog as the first arguement. This will prevent confusion when working
with lock.c code, many of the function declare the canlog variable and
in some cases it previously appeared to be unused.
Change-Id: I83b372cb0654c5c18eadc512f65a57fa6c2e9853
Add attribute_warn_unused_result to ast_taskprocessor_push,
ast_taskprocessor_push_local and ast_threadpool_push. This will help
ensure we perform the necessary cleanup upon failure.
Change-Id: I7e4079bd7b21cfe52fb431ea79e41314520c3f6d
This has no effect on startup since AST_MODULE_LOAD_FAILURE aborts
startup, but it's possible for this code to be returned on manual load
of a module after startup.
It is an error for a module to not have a load callback but this is not
a fatal system error. In this case flag the module as declined, return
AST_MODULE_LOAD_FAILURE only if a required module is broken.
Expand doxygen documentation for AST_MODULE_LOAD_*.
Change-Id: I3c030bb917f6e5a0dfd9d91491a4661b348cabf8
* Display list of unavailable dependencies when they cause another
module to fail loading.
* When a module declines to load find all modules which depend on it so
they can be declined and listed together.
* Prevent retry of declined modules during startup.
* When a module fails to dlopen try loading it with RTLD_LAZY so we can
attempt to display the list of missing dependencies.
These changes are meant to reduce logger spam that is caused when a
module has many dependencies and declines to load. This also fixes some
error paths which failed to recognize required modules.
Module load/start errors are delayed until the end of loader startup.
Change-Id: I046052c71331c556c09d39f47a3b92975f3e1758
Add a volatile flag to lock tracking structures so we only need to use
the global lock when first initializing tracking.
Additionally add support for DEBUG_THREADS_LOOSE_ABI. This is used by
astobj2.c to eliminate storage for tracking fields when DEBUG_THREADS is
not defined.
Change-Id: Iabd650908901843e9fff47ef1c539f0e1b8cb13b
In order to do this and provide good feedback, a new macro was
created (AST_EXT_LIB_EXTRA_CHECK) which does the normal check and
path setups for the library then compiles, links and runs a supplied
code fragment to do the final determination. In this case, the
final code fragment compares UNBOUND_VERSION_MAJOR
and UNBOUND_VERSION_MINOR to determine if they're greater than or
equal to 1.5.
Since we require version 1.5, some code in res_resolver_unbound
was also simplified.
ASTERISK-28045
Reported by: Samuel Galarneau
Change-Id: Iee94ad543cd6f8b118df8c4c7afd9c4e2ca1fa72
Use json_vsprintf from versions which contain fix for va_copy leak.
Apply fixes from jansson master:
* va_copy leak fix.
* Avoid potential invalid memory read in json_pack.
* Rename variable that shadowed another.
Change-Id: I7522e462d2a52f53010ffa1e7d705c666ec35539
When writing an RTCP report to json the code attempts to pack the "ssrc" and
"source_ssrc" unsigned integer values as a signed int value type. This of course
means if the ssrc's unsigned value is greater than that which can fit into a
signed integer value it gets converted to a negative number. Subsequently, the
negative value goes out in the json report.
This patch now packs the value as a json_int_t, which is the widest integer type
available on a given system. This should make it so the value no longer
overflows.
Note, this was caught by two failing tests hep/rtcp-receiver/ and
hep/rtcp-sender.
Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0
There's been a long standing leak when using topic pools. The
topics in the pool get cleaned up when the last pool reference is
released but you can't remove a topic specifically. If you reloaded
app_voicemail for instance, and mailboxes went away, their topics
were left in the pool.
* Added stasis_topic_pool_delete_topic() so modules can clean up
topics from pools.
* Registered the topic pool containers so it can be examined from
the CLI when AO2_DEBUG is enabled. They'll be named
"<topic_pool_name>-pool".
Change-Id: Ib7957951ee5c9b9b4482af7b9b4349112d62bc25
This change brings in PJSIP 2.8, removes all the patches
that were merged upstream, and makes a minor change to
support a breaking change that was done.
ASTERISK-28059
Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189
Both pjsip_tx_data.tp_info.dst_name and pjsip_rx_data.pkt_info.src_name
store IPv6 addresses without enclosing brackets. This causes some log
output to be confusing because it is difficult to separate the IPv6
address from a port specification.
* Use pj_sockaddr_print() along with pjsip_tx_data.tp_info.dst_addr and
pjsip_rx_data.pkt_info.src_addr where possible for consistent IPv6
output.
* When a pj_sockaddr is not available, explicitly wrap IPv6 addresses
in brackets.
* When assigning pjsip_rx_data.pkt_info.src_name ourselves, make sure
to also set pjsip_rx_data.pkt_info.src_addr.
Change-Id: I5cfe997ced7883862a12b9c7d8551d76ae02fcf8
Currently, to convert from a pj_sockaddr to an ast_sockaddr, the address
needs to be rendered to a string and then parsed into the correct
structure. This also involves a call to getaddrinfo(3). The same is true
for the inverse operation.
Instead, because we know the internal structure of both ast_sockaddr and
pj_sockaddr, we can translate directly between the two without the
need for an intermediate string.
Change-Id: If0fc4bba9643f755604c6ffbb0d7cc46020bc761
When the stasis cache is used a hash is calculated for
retrieving or inserting messages. This change calculates
a hash when the message type is initialized that is then
used each time needed. This ensures that the hash is
calculated only once for the message type.
Change-Id: I4fe6bfdafb55bf5c322dd313fbd8c32cce73ef37
* Don't include pjlib.h twice in res_pjsip.h
* Consistently use #include <> form for pjproject includes.
(pjsip.h and pjlib.h)
Change-Id: I3f7b42044840de64edf7e9d7695cb60c45990dc7
Changing any Menuselect option in the `Compiler Flags` section causes a
full rebuild of the Asterisk source tree. Every enabled option causes
a #define to be added to buildopts.h, thus breaking ccache caching for
every source file that includes "asterisk.h". In most cases each option
only applies to one or two files. Now we only define those options for
the specific sources which use them, this causes much better cache
matching when working with multiple builds. For example testing code
with an without MALLOC_DEBUG will now use just over half the ccache
size, only main/astmm.o will have two builds cached instead of every
file.
Reorder main/Makefile so _ASTCFLAGS set on specific object files are all
together, sorted by filename. Stop adding -DMALLOC_DEBUG to CFLAGS of
bundled pjproject, this define is no longer used by any header so only
serves to break cache.
The only code change is a slight adjustment to how main/astmm.c is
initialized. Initialization functions always exist so main/asterisk.c
can call them unconditionally. Additionally rename the astmm
initialization functions so they are not exported.
Change-Id: Ie2085237a964f6e1e6fff55ed046e2afff83c027
In Solaris, the header <jansson.h> is in /usr/include/jansson. To find
Jansson even in such a subdirectory, the tool pkg-config is queried via
AST_PKG_CONFIG_CHECK. For those platforms, which do not list Jansson via
pkg-config, the previous check remains and is executed thereafter.
Because the check for the NetBSD Editline library uses the tool pkg-config
the code of PKG_PROG_PKG_CONFIG must be used. Because that check happens
earlier than Jansson, it must be placed in front of that.
ASTERISK-27991
Change-Id: I69ea0f379f87a50049654b2487c76ee1c04fa53a
When publishing a device state the change can be marked as being
cachable or not. If it is not cached the change is just published
to all interested and not stored away for later query. This was not
fully taken into account when publishing in stasis. The act of
publishing would create a topic for the device even if it may be
ephemeral.
This change makes it so messages which are not cached won't create
a topic for the device. If a topic does already exist it will be
published to but otherwise the change will only be published to
the device state all topic.
ASTERISK-27591
Change-Id: I18da0e8cbb18e79602e731020c46ba4101e59f0a
The "xmldoc dump" cli command was simply concatenating xml documents
into the output file. The resulting file had multiple "xml"
processing instructions and multiple root elements which is illegal.
Normally this isn't an issue because Asterisk has only 1 main xml
documentation file but codec_opus has its own file so if it's
downloaded and you do "xmldoc dump", the result is invalid.
* Added 2 new functions to xml.c:
ast_xml_copy_node_list creates a copy of a list of children.
ast_xml_add_child_list adds a list to an existing list.
* Modified handle_dump_docs to create a new output document and
add to it the children from each input file. It then dumps the
new document to the output file.
Change-Id: I3f182d38c75776aee76413dadd2d489d54a85c07
In the past there was an assertion in the ast_sched_del function
and in order to ensure it was useful the calling function name,
line number, and filename had to be passed in. This cause the ABI
to be different between dev mode and non-dev mode.
This assertion is no longer present so the special logic can be
removed to make it the same between them both.
Change-Id: Icbc69c801e357d7004efc5cf2ab936d9b83b6ab8
Support has been added for receiving a NACK request and handling it.
Now, Asterisk can detect when a NACK request should be sent and knows
how to construct one based on the packets we've received from the remote
end. A buffer has been added that will store out of order packets until
we receive the packet we are expecting. Then, these packets are handled
like normal and frames are queued to the core like normal. Asterisk
knows which packets to request in the NACK request using a vector
which stores the sequence numbers of the packets we are currently missing.
If a missing packet is received, cycle through the buffer until we reach
another packet we have not received yet. If the buffer reaches a certain
size, send a NACK request. If the buffer reaches its max size, queue all
frames to the core and wipe the buffer and vector.
According to RFC3711, the NACK request must be sent out in a compound
packet. All compound packets must start with a sender or receiver
report, so some work was done to refactor the current sender / receiver
code to allow it to be used without having to also include sdes
information and automatically send the report.
Also added additional functionality to ast_data_buffer, along with some
testing.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27810 #close
Change-Id: Idab644b08a1593659c92cda64132ccc203fe991d
* Merge the preload and load stages, use load ordering to try preload's
first. This fixes an issue where `preload=res_config_curl` would fail
unless res_curl and func_curl were also preloaded. Now it is only
required that those modules be loaded during startup: autoload or
regular load is good enough.
* The configuration option `require` and `preload-require` were only
effective if the modules failed to load. These options will now abort
Asterisk startup if required modules fail to reach the 'Running'
state.
* Missing or invalid 'module.conf' did not prevent startup. Asterisk
doesn't do anything without modules so this a fatal error.
Change-Id: Ie4176699133f0e3a823b43f90c3348677e43a5f3
Keep track if ICE candidates were in the SDP offer & only put them
in the corresponding SDP answer if the offer condaind ICE candidates
ASTERISK-27957 #close
Change-Id: Idf2597ee48e9a287e07aa4030bfa705430a13a92
A new option 'suppress_q850_reason_headers' has been added to the
endpoint object. Some devices can't accept multiple Reason headers and
get confused when both 'SIP' and 'Q.850' Reason headers are received.
This option allows the 'Q.850' Reason header to be suppressed.
The default value is 'no'.
ASTERISK-27949
Reported-by: Ross Beer
Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1
The AMI action was directly sending the text to the channel driver.
However, this makes two threads attempt to handle media and runs afowl of
CHECK_BLOCKING.
* Queue a read action to make the channel's media handling thread actually
send the text message. This changes the AMI actions success/fail response
to just mean the text was queued to be sent not that the text actually got
sent. The channel driver may not even support sending text messages.
ASTERISK-27943
Change-Id: I9dce343d8fa634ba5a416a1326d8a6340f98c379
pjproject by default currently will follow media forked during an INVITE
on outbound calls if the To tag is different on a subsequent response as
that on an earlier response. We handle this correctly. There have
been reported cases where the To tag is the same but we still need to
follow the media. The pjproject patch in this commit adds the
capability to sip_inv and also adds the capability to control it at
runtime. The original "different tag" behavior was always controllable
at runtime but we never did anything with it and left it to default to
TRUE.
So, along with the pjproject patch, this commit adds options to both the
system and endpoint objects to control the two behaviors, and a small
logic change to session_inv_on_media_update in res_pjsip_session to
control the behavior at the endpoint level.
The default behavior for "different tags" remains the same at TRUE and
the default for "same tag" is FALSE.
Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
ASTERISK-27936
Reported-by: Ross Beer
* changes:
channel.c: Make CHECK_BLOCKING() save thread LWP id for messages.
channel.c: Fix usage of CHECK_BLOCKING()
autoservice: Don't start channel autoservice if the thread is a user interface.
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: I4d6a2fe7386ea447ee199003bf8ad681cb30454e
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905
The CHECK_BLOCKING() macro is used to indicate if a channel's handling
thread is about to do a blocking operation (poll, read, or write) of
media. A few operations such as ast_queue_frame(), soft hangup, and
masquerades use the indication to wake up the blocked thread to reevaluate
what is going on.
ASTERISK-27625
Change-Id: I4dfc33e01e60627d962efa29d0a4244cf151a84d
Executing dialplan functions from either AMI or ARI by getting a variable
could place the channel into autoservice. However, these user interface
threads do not handle the channel's media so we wind up with two threads
attempting to handle the media.
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: If2dc94ce15ddabf923ed1e2a65ea0ef56e013e49
It is invalid to typedef something more than once. Though not all gcc
compilers on different OS's complain about it.
Change-Id: I5a7d4565990c985822d61ce75bde0b45f9870540
Furthermore, allow OpenSSL configured with no-dh. Additionally, this change
allows auto-negotiation of the elliptic curve/group for servers, not only with
OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer. This enables X25519
(since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a side-effect.
ASTERISK-27910
Change-Id: I5b0dd47c5194ee17f830f869d629d7ef212cf537
asterisk/tcptls.h was included (explicitly, implicitly, or transitively). Those
inclusions got replaced by forward declarations. As side effect, the inclusions
got completed.
ASTERISK-27878
Change-Id: I9d102728e30336d6522e5e4ae9e964013a0835f7
When RTP was originally created it had the ability to place a single
extension in an RTP packet. In practice people wanted to potentially
put multiple extensions in one and so RFC 5285 (obsoleted by RFC
8285) came into existence. This allows RTP extensions to be negotiated
with a unique identifier to be used in the RTP packet, allowing
multiple extensions to be present in the packet.
This change extends the RTP engine API to add support for this. A
user of it can enable extensions and the API provides the ability to
retrieve the information (to construct SDP for example) and to provide
negotiated information (from SDP). The end result is that the RTP
engine can then query to see if the extension has been negotiated and
what unique identifier is to be used. It is then up to the RTP engine
implementation to construct the packet appropriately.
The first extension to use this support is abs-send-time which is
defined in the REMB draft[1] and is a second timestamp placed in an
RTP packet which is for when the packet has left the sending system.
It is used to more accurately determine the available bandwidth.
ASTERISK-27831
[1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
Change-Id: I508deac557867b1e27fc7339be890c8018171588
This function originally was used in chan_sip to enable some simplifying
assumptions and eventually was copy and pasted into res_pjsip_logger and
res_hep. Since it's replicated in three places, it's probably best to
move it into the public netsock2 API for these modules to use.
Change-Id: Id52e23be885601c51d70259f62de1a5e59d38d04
The stream topology has no lock of its own resulting in
another lock protecting it in some way (for example the
channel lock). If multiple channels are being juggled at
the same time this can be problematic. This change makes
the topology a reference counted object instead which
guarantees it will remain valid even without the channel
lock being held.
Change-Id: I4f4d3dd856a033ed55fe218c3a4fab364afedb03
How it works today:
media_cache tries to parse out the extension of the media file to be played
from the URI provided to Asterisk while caching the file.
What's expected:
Better will be to have Asterisk get extension from other ways too. One of the
common ways is to get the type of content from the CONTENT-TYPE header in the
HTTP response for fetching the media file using the URI provided.
Steps to Reproduce:
Provide a URL of the form: http://host/media/1234 to Asterisk for media
playback. It fails to play and logs show the following error line:
[Sep 15 15:48:05] WARNING [29148] [C-00000092] file.c:
File http://host/media/1234 does not exist in any format
Scenario this issue is blocking:
In the case where the media files are stored in some cloud object store,
following can block the media being played via Asterisk:
Cloud storage generally needs authenticated access to the storage. The way
to do that is by using signed URIs. With the signed URIs there's no way to
preserve the name of the file.
In most cases Cloud storage returns a key to access the object and preserving
file name is also not a thing there
ASTERISK-27286
Reporter: Gaurav Khurana
Change-Id: I1b14692a49b2c1ac67688f58757184122e92ba89
The OPTIONS support in PJSIP has organically grown, like many things in
Asterisk. It has been tweaked, changed, and adapted based on situations
run into. Unfortunately this has taken its toll. Configuration file
based objects have poor performance and even dynamic ones aren't that
great.
This change scraps the existing code and starts fresh with new eyes. It
leverages all of the APIs made available such as sorcery observers and
serializers to provide a better implementation.
1. The state of contacts, AORs, and endpoints relevant to the qualify
process is maintained. This state can be updated by external forces (such
as a device registering/unregistering) and also the reload process. This
state also includes the association between endpoints and AORs.
2. AORs are scheduled and not contacts. This reduces the amount of work
spent juggling scheduled items.
3. Manipulation of which AORs are being qualified and the endpoint states
all occur within a serializer to reduce the conflict that can occur with
multiple threads attempting to modify things.
4. Operations regarding an AOR use a serializer specific to that AOR.
5. AORs and endpoint state act as state compositors. They take input
from lower level objects (contacts feed AORs, AORs feed endpoint state)
and determine if a sufficient enough change has occurred to be fed further
up the chain.
6. Realtime is supported by using observers to know when a contact has
been registered. If state does not exist for the associated AOR then it
is retrieved and becomes active as appropriate.
The end result of all of this is best shown with a configuration file of
3000 endpoints each with an AOR that has a static contact. In the old
code it would take over a minute to load and use all 8 of my cores. This
new code takes 2-3 seconds and barely touches the CPU even while dealing
with all of the OPTIONS requests.
ASTERISK-26806
Change-Id: I6a5ebbfca9001dfe933eaeac4d3babd8d2e6f082
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
Replaces the never used opaque data array.
Updated stream tests to include get/set metadata and
stream clone with metadata.
Added stream metadata dump to "core show channel"
Change-Id: Id7473aa4b374d7ab53046c20e321037ba9a56863
Similar to pjproject's PJ_ASSERT_RETURN macro, this one will do the
following...
If the assert passes... NoOp
If the assert fails and AST_DEVMODE is defined, execute ast_assert()
then, if DO_CRASH isn't set, return from the calling function with
the supplied value.
If the assert fails and AST_DEVMODE is not defined, return from the
calling function with the supplied value.
The macro will execute a return without a value if one isn't suppled.
Change-Id: I0003844affeab550d5ff5bca7aa7cf8a559b873e
Core bridging and, more specifically, bridge_softmix have been
enhanced to relay received frames of type TEXT or TEXT_DATA to all
participants in a softmix bridge. res_pjsip_messaging and
chan_pjsip have been enhanced to take advantage of this so when
res_pjsip_messaging receives an in-dialog MESSAGE message from a
user in a conference call, it's relayed to all other participants
in the call.
res_pjsip_messaging already queues TEXT frames to the channel when
it receives an in-dialog MESSAGE from an endpoint and chan_pjsip
will send an MESSAGE when it gets a TEXT frame. On a normal
point-to-point call, the frames are forwarded between the two
correctly. bridge_softmix was not though so messages weren't
getting forwarded to conference bridge participants. Even if they
were, the bridging code had no way to tell the participants who
sent the message so it would look like it came from the bridge
itself.
* The TEXT frame type doesn't allow storage of any meta data, such
as sender, on the frame so a new TEXT_DATA frame type was added that
uses the new ast_msg_data structure as its payload. A channel
driver can queue a frame of that type when it receives a message
from outside. A channel driver can use it for sending messages
by implementing the new send_text_data channel tech callback and
setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech
properties. If set, the bridging/channel core will use it instead
of the original send_text callback and it will get the ast_msg_data
structure. Channel drivers aren't required to implement this. Even
if a TEXT_DATA enabled driver uses it for incoming messages, an
outgoing channel driver that doesn't will still have it's send_text
callback called with only the message text just as before.
* res_pjsip_messaging now creates a TEXT_DATA frame for incoming
in-dialog messages and sets the "from" to the display name in the
"From" header, or if that's empty, the caller id name from the
channel. This allows the chat client user to set a friendly name
for the chat.
* bridge_softmix now forwards TEXT and TEXT_DATA frames to all
participants (except the sender).
* A new function "ast_sendtext_data" was added to channel which
takes an ast_msg_data structure and calls a channel's
send_text_data callback, or if that's not defined, the original
send_text callback.
* bridge_channel now calls ast_sendtext_data for TEXT_DATA frame
types and ast_sendtext for TEXT frame types.
* chan_pjsip now uses the "from" name in the ast_msg_data structure
(if it exists) to set the "From" header display name on outgoing text
messages.
Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489
Adds the ability to receive and handle incoming NACK requests if
retransmissions are enabled. If retransmissions are enabled, a data
buffer is allocated that stores packets being sent. If a NACK request
is received, the packet requested for retransmission is sent if it is
still in the buffer. In the same request, if any of the following 16
packets are marked as not received, those will be sent as well if
available, as outlined in RFC4585.
Also changes RTCP RR and SR to use media source SSRC instead of packet
source SSRC when determining which instance to use for RTCP reports.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27806 #close
Change-Id: I7f7f124af3b9d5d2fd9cffc6ba8cb48a6fff06ec
Use of extended stringfields is a temporary mechanism to avoid ABI
breakage in released branches without resorting to more inconvienient
methods.
* Collect existing extended stringfields into the parent stringfield
section of the struct.
Change-Id: I8d46d037801b4518837c3ea4b6df95ceadc9436b
When a scheduled task is created you can pass in the
AST_SIP_SCHED_TASK_TRACK flag. This new flag causes scheduling events to
be logged.
Change-Id: I91967eb3d5a220915ce86881a28af772f9a7f56b
ast_sip_push_task_synchronous() did not necessarily execute the passed in
task under the specified serializer. If the current thread is any
registered pjsip thread then it would execute the task immediately instead
of under the specified serializer. Reentrancy issues could result if the
task does not execute with the right serializer.
The original reason ast_sip_push_task_synchronous() checked to see if the
current thread was a registered pjsip thread was because of a deadlock
with masquerades and the channel technology's fixup callback
(ASTERISK_22936). A subsequent masquerade deadlock fix (ASTERISK_24356)
involving call pickups avoided the original deadlock situation entirely.
The PJSIP channel technology's fixup callback no longer needed to call
ast_sip_push_task_synchronous().
However, there are a few places where this unexpected behavior is still
required to avoid deadlocks. The pjsip monitor thread executes callbacks
that do calls to ast_sip_push_task_synchronous() that would deadlock if
the task were actually pushed to the specified serializer. I ran into one
dealing with the pubsub subscriptions where an ao2 destructor called
ast_sip_push_task_synchronous().
* Split ast_sip_push_task_synchronous() into
ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer().
ast_sip_push_task_wait_servant() has the old behavior of
ast_sip_push_task_synchronous(). ast_sip_push_task_wait_serializer() has
the new behavior where the task is always executed by the specified
serializer or a picked serializer if one is not passed in. Both functions
behave the same if the current thread is not a SIP servant.
* Redirected ast_sip_push_task_synchronous() to
ast_sip_push_task_wait_servant() to preserve API for released branches.
ASTERISK_26806
Change-Id: Id040fa42c0e5972f4c8deef380921461d213b9f3
* Fix the periodic interval wander because it may take significant time
between the sched thread queueing the task in the serializer and the
serializer actually executing the task. The time it takes to actually
execute the task was already taken into account.
* Pass a schtd ref to the serializer when we queue a scheduled task on
the serializer. We don't want it going away on us while it is in the
serializer queue.
* Skip the scheduled task if the task was canceled between queueing the
task to the serializer and the serializer actually executing the task.
* Reorder struct ast_sip_sched_task to avoid unnecessary padding. Removed
task_id and added next_periodic.
* Hold a ref to the passed in serializer so the serializer cannot go away
on the scheduled task.
ASTERISK_26806
Change-Id: I6c8046b75f6953792c8c30e55b836a4291143f24
* Removed several invalid uses of OBJ_NOLOCK. These uses resulted in the
'tasks' container being accessed without a lock in a multi-threaded
environment. A recipe for crashes.
* Removed needlessly obtaining schtd object references. If the caller
providing you a pointer to an object doesn't have a valid reference then
you cannot safely get one from it.
* Getting a ref to 'tasks' when you aren't copying the pointer into
another location is useless. The 'tasks' container pointer is global.
* Removed many unnecessary uses of RAII_VAR.
* Make ast_sip_schedule_task() name parameter const.
ASTERISK_26806
Change-Id: I5c62488e651314e2a1dbc01f5b078a15512d73db
There is a problem when an INVITE-with-Replaces transfer targets a channel
in a ConfBridge. The transfer will unconditionally swap out the
ConfBridge channel. Unfortunately, the ConfBridge state will not be aware
of this change. Unexpected behavior will happen as a result since
ConfBridge channels currently can only be replaced by a masquerade and not
normal bridge channel moves.
* We just need to pretend that the channel isn't in a bridge (like other
transfer methods already do) so the transfer channel will masquerade into
the ConfBridge channel.
Change-Id: I209beb0e748fa4f4b92a576f36afa8f495ba4c82
The previous payload specific feedback handling was very single
minded in that it just assumed everything should trigger a video
update. This was changed but the handling of picture loss indication
was not added. The result was that video may not flow. This change
adds it explicitly in.
Change-Id: I1894be02e39ee10a0af841b5a1dca5f0ec7d60b6
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
Adds a data buffer with a configurable size that can store different
kinds of packets (like RTP packets for retransmission). Given a number
it will store a data packet at that position relative to the others.
Given a number it will retrieve the given data packet if it is present.
This is purposely a storage of arbitrary things so it can be used not
just for RTP packets but also Asterisk frames in the future if needed.
The API does not internally use a lock, so it will be up to the user of
the API to properly protect the data buffer.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
Change-Id: Iff13c5d4795d52356959fe2a57360cd57dfade07
This change extends the existing AST_FRAME_RTCP frame type to be
able to contain additional RTCP message types, such as feedback
messages. The payload type is contained in the subclass which allows
knowing what is in the frame itself.
The RTCP feedback message type is now handled and REMB[1] messages
are raised with their containing information.
This also fixes a bug where all feedback messages were triggering
video updates instead of just FIR and FUR.
Finally RTCP frames are now passed up through the Asterisk core to
what is handling the channel, mapped appropriately in the case of
bridging, and written to an outgoing stream. Since RTCP frames are
on a per-stream basis this is only done on multistream capable
channels.
[1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
ASTERISK-27758
ASTERISK-26366
Change-Id: I680da0ad8d5059d5e9655d896fb9d92e9da8491e
This creates a separate source to 'own' symbols related to options.h and
paths.h. This significantly reduces the number of exports created by
main/asterisk.o. This change is required to eventually be able to
link unmodified Asterisk sources to utilities and/or stand-alone tests.
ASTERISK~26245
Change-Id: I5cf184f4757f9363b80c9e678bdc35c477122380
* dahdi_chan_name
* dahdi_chan_name_len
* dahdi_chan_mode
* __manager_event
* dialed_interface_info
Added comment about __progname and environ being needed for FreeBSD to
prevent accidental removal in the future.
Change-Id: I3ae026bc541cd9cb572be2ffa95fc359547642b5
If the two formats on a channel are equal, we don't transcode and since
the generic plc needs slin to work, it doesn't get invoked.
* A new configuration option "genericplc_on_equal_codecs" was added
to the "plc" section of codecs.conf to allow generic packet loss
concealment even if no transcoding was originally needed.
Transcoding via SLIN is forced in this case.
ASTERISK-27743
Change-Id: I0577026a179dea34232e63123254b4e0508378f4
This change adds a property to RTP instances to indicate that
REMB support is enabled and that sending/receiving should be
passed through.
This also enables it on video RTP instances in PJSIP if
WebRTC support is enabled.
Finally the goog-remb extension is added to the SDP using
the rtcp-fb attribute to indicate our support for it.
Details about REMB can be found on the draft document for it:
https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
Change-Id: I1902dda1c0882bd1a0d71b2f120684b44b97e789
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
This replaces AST_INLINE_API allocators in utils.h with real functions
implemented in astmm.c. Associated macro's are also moved from utils.h
to astmm.h.
Remove menuselect conflicts between MALLOC_DEBUG and DEBUG_CHAOS as they
can now be combined.
This has multiple benefits:
* Simplifies asterisk/utils.h by removing inline functions and use of
the logger.
* Removal of these inline functions decreases size of Asterisk and
module binaries by 1% or more.
* Puts memory management functions together with and without
MALLOC_DEBUG enabled, simplifying management of the code.
* Enables DEBUG_CHAOS for ASTMM_REDIRECT and bundled pjproject.
Change-Id: If9df4377f74bdbb627461b27a473123e05525887
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
GCC documentation states that when __attribute__((malloc)) is used it
should not return storage which contains any valid pointers. It
specifically mentions that realloc functions should not have the malloc
attribute, but this also means that complex initializers which could
contain initialized pointers should not use this attribute.
Change-Id: If507f33ffb3ca3b83b702196eb0e8215d27fc7d2
This causes MALLOC_DEBUG reporting to be slightly different, calls which
cause additional memory pools to be allocated now report the callers
location rather than the location which originally allocated the
string field structure. This reduces storage needed by string fields
and allows MALLOC_DEBUG to identify the source of additional allocations
rather than obscuring it by reporting the original allocation caller.
Change-Id: Idd18e6639a87ab862079b580c114d90361412289
When built-in components of Asterisk fail to start they cause the
Asterisk startup to abort. In these cases only the most critical
cleanup should be performed - closing databases and terminating
proceses. These cleanups are registered using ast_register_atexit, all
other cleanups should not be run during startup abort.
The main reason for this change is that these cleanup procedures are
untestable from the partially initialized states, if they fail it could
prevent us from ever running the critical cleanup with ast_run_atexits.
Create separate initialization for dns_core.c to be run unconditionally
during startup instead of being initialized by the first dns resolver to
be registered. This ensures that 'sched' is initialized before it can be
potentially used.
Replace ast_register_atexit with ast_register_cleanup in media_cache.c.
There is no reason for this cleanup to happen unconditionally.
Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3
In NetBSD, PortAudio 1 is still the default version. PortAudio 2 can be
installed side by side but gets placed in a 'portaudio2' subdirectory. To
find PortAudio 2 even in a subdirectory, the tool pkg-config is queried via
AST_PKG_CONFIG_CHECK. For those platforms, which do not list PowerAudio 2
via pkg-config, the previous check remains and is executed thereafter.
ASTERISK-27721
Change-Id: I4175500126909ad1b181fff8e11bb4a3a6ae4fa9
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
This allows asterisk to be compiled with MALLOC_DEBUG to load modules
built without MALLOC_DEBUG. Now pre-compiled third-party modules will
still work regardless of MALLOC_DEBUG being enabled or not.
Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
A couple of additional properties are needed in rtp_engine to enable
support for packet retransmission: AST_RTP_PROPERTY_RETRANS_RECV and
AST_RTP_PROPERTY_RETRANS_SEND. These will both be enabled automatically
if an endpoint has the webrtc option enabled. While this adds no
functionality currently, it will serve as a building block for future
changes for RTP retransmission support.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
Change-Id: Ic598acd042a045f9d10e5bdccb66f4efc9e587cc
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
Create ast_atomic macro's to provide a consistent interface to the
common functionality of __atomic and __sync built-in functions.
ASTERISK-27619
Change-Id: Ieba3f81832a0e25c5725ea067e5d6f742d33eb5b
In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
This addresses all performance issues with 'module load' completion. In
addition to using ast_cli_completion_add we stop using libedit's
filename_completion_function, instead using ast_file_read_dir. This
ensures all results are produced from a single call to opendir.
Change-Id: I8bf51ffaa7ef1606f3bd1b5bb13f1905d72c6134
Because of a copy-and-paste error, the Asterisk project was using __typeof
instead of typeof. It works because typeof, __typeof, and __typeof__ are
supported by GCC, but here the escaped variant was not intended. Therefore,
for consistence, we change this to typeof.
Change-Id: I2a962c3e596e882f691a19345445b14571a5f07c
This change causes the configure script to throw an error if neither
__sync nor __atomic builtin functions are available.
ASTERISK-27619
Change-Id: Ie01a281e0f5c41dfeeb5f250c1ccea8752f56ef9
Add a check to configure.ac for __atomic_fetch_add support. If found
use the __atomic built-in operators for ast_atomic_dec_and_test and
ast_atomic_fetchadd_int.
ASTERISK~27619
Change-Id: I65b4feb02bae368904ed0fb03f585c05f50a690e
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
* Copy more than one character at a time when there is nothing to
substitute.
* Fix off by one error if a '}' or ']' is missing.
* Eliminated the requirement that the "used" parameter had to point to a
variable. The current callers were always declaring a variable to meet
the requirement and discarding the value put into that variable. Now it
can be NULL.
* In ast_str_substitute_variables_full() fixed using the bogus channel to
evaluate a function. We were not using the bogus channel we just created
to help evaluate a subexpression.
Change-Id: Ia83d99f4f16abe47f329eb39b6ff2013ae7c9854
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
ast_vector_string_split:
This function will add items to an ast_vector_string by splitting values
of a string buffer. Items are appended to the vector in the order they
are found.
ast_vector_const_string:
A vector of 'const char *'.
Change-Id: I1bf02a1efeb2baeea11c59c557d39dd1197494d7
This function returns NULL if the module in question is not running. I
did not change ast_module_ref as most callers do not check the result
and they always call ast_module_unref.
Make use of this function when running registered items from:
* app_stack API's
* bridge technologies
* CLI commands
* File formats
* Manager Actions
* RTP engines
* Sorcery Wizards
* Timing Interfaces
* Translators
* AGI Commands
* Fax Technologies
ASTERISK-20346 #close
Change-Id: Ia16fd28e188b2fc0b9d18b8a5d9cacc31df73fcc
Add a reference to the calling module when it is active to protect
access to datastore->info. Remove module references done by
func_periodic_hook as the datastore now handles it.
ASTERISK-25128 #close
Change-Id: I8357a3711e77591d0d1dd8ab4211a7eedd782c89
This is the old ASTOBJ macro's which are no longer used except by the
deprecated netsock.c. Move it to the chan_iax2 include folder so it
does not get used elsewhere.
Change-Id: I7e4ae96678b36b9f41d3cae14b167f110eb5d349
Joshua C. Colp
Chris-Savinovich
mohitdhiman
Alexei Gradinari
Diederik de Groot
Corey Farrell
George Joseph
Friendly Automation
Sean Bright
Sungtae Kim
Torrey Searle
Nick French
Kevin Harwell
Richard Mudgett
Alexander Traud
Ben Ford
Matthew Fredrickson
Gaurav Khurana