This patch fixes a race condition between the raising of test AMI events (which
drive many tests in the Asterisk Test Suite) and other AMI events. Prior to
this patch, the Stasis messages published to the test topic were not forwarded
to the AMI topic. Instead, the code in manager had a dedicated handler for test
messages that was independent of the topics forwarded to the AMI topic. This
results in no synchronization between the test messages and the rest of the
Stasis messages published out over AMI. In some test with very tight timing
constraints, this can result in out of order messages and spurious test
failures. Properly forwarding the Test Suite topic to the AMI topic ensures
that the messages are synchronized properly.
This patch does that, and moves the message handling to the Stasis definition
of the Test Suite message in test.c as well.
Review: https://reviewboard.asterisk.org/r/4221/
........
Merged revisions 428945 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428946 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the publication of attended transfer messages were pushed to another
thread, some subtle race conditions were introduced with the CEL unit tests.
This patch fixes one of them, and pushes the other to ASTERISK-22367, which
already exists to fix another bouncy CEL unit test.
In particular, this patch fixes the test_cel_attended_transfer_bridges_link
test, and defers the test_cel_attended_transfer_bridges_swap test to the
aforementioned JIRA issue.
ASTERISK-22367
........
Merged revisions 428891 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428892 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The UW IMAP library is instrinsically not thread-safe, and relies upon higher
level applications to guarantee thread safety. For the most part, this is
provided by the vms object, which provides locking for individual streams.
Unfortunately, this is not sufficient for calls to mail_open which create the
IMAP stream. mail_open can, on some systems, call into a UW IMAP specific
function for determining the address of a system based on a hostname,
ip_nametoaddr.
In the ip6_unix implementation of this function, static variables are used
to hold parsing buffers. This can cause a crash if multiple threads attempt
to convert a hostname to an address at the same time. Locking on a single
mail stream is not sufficient to prevent simultaneous access to these static
variables.
In the IMAP library, this function can be called from the mail_open and
imap_status functions. As the imap_status function is not used by
app_voicemail, locking on access to mail_open is sufficient to prevent
any mangling of the buffers.
Review: https://reviewboard.asterisk.org/r/4188/
ASTERISK-24516 #close
Reported by: David Duncan Ross Palmer
Tested by: David Duncan Ross Palmer
patches:
ASTERISK-24516.diff uploaded by David Duncan Ross Palmer (License 6660)
........
Merged revisions 428863 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428864 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428865 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes a small rearrangement to only do dialplan lookups during
loopback switches if the pattern matches. Prior to this patch, the dialplan
lookups were always performed, even when the result would be discarded.
Dialplan lookups can be very costly if remote switches - like DUNDi - are
present. In those cases extension matching is sped up considerably, making
the issue of lost digits more manageable.
As collateral damage, 6 trailing spaces were killed.
Review: https://reviewboard.asterisk.org/r/4211
ASTERISK-24577 #close
Reported by: Birger Harzenetter
patches:
ast-loopback.patch uploaded by Birger Harzenetter (License 5870)
........
Merged revisions 428787 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428788 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428789 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two methods within res_pjsip_refer for keeping track of the state of a transfer.
The first is a framehook which looks at frames passing by to determine the state. The second
subscribes to know when the channel joins a bridge. In the case when the channel joins the
bridge the framehook is *NOT* removed and this prevents the native RTP bridging technology
from getting used.
This change gets the channel and if it still exists remove the framehook.
Review: https://reviewboard.asterisk.org/r/4218/
........
Merged revisions 428760 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428761 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When shutting down Asterisk that has an active AMI connection, you get
several "failed to extend from %d to %d" messages because use of the
EVENT_FLAG_SHUTDOWN attempts to add all AMI permission strings to the
event.
* Created MAX_AUTH_PERM_STRING to use when creating stack based struct
ast_str variables used with the authority_to_str() and
user_authority_to_str() functions instead of a variety of magic numbers
that could be too small.
* Added a special check for EVENT_FLAG_SHUTDOWN to authority_to_str() so
it will not attempt to add all permission level strings.
Review: https://reviewboard.asterisk.org/r/4200/
........
Merged revisions 428570 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428571 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428572 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As a result of https://reviewboard.asterisk.org/r/3305, res_sorcery_realtime
was tossing database fields that didn't have an exact match to a sorcery
registered field. This broke the ability to use regexes as field names which
manifested itself as a failure of res_pjsip_phoneprov_provider which uses
this capability. It also broke handling of fields that start with '@' in
realtime but I don't think anyone noticed.
This patch does the following...
* Modifies ast_sorcery_fields_register to pre-compile the name regex.
* Modifies ast_sorcery_is_object_field_registered to test the regex if it
exists instead of doing an exact strcmp.
* Modifies res_pjsip_phoneprov_provider with a few tweaks to get it to work
with realtime.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4185/
........
Merged revisions 428543 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428544 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r428165, two bugs were introduced:
* Prior to entering the features retry loop, the buffer that holds the
collected digits is wiped. However, this inadvertently wipes out the
first collected digit on the first pass through, which is obtained
in ast_stream_and_wait. This caused all of the features tests to fail.
* If ast_app_dtget returns a hangup (-1), the loop would retry incorrectly.
If we detect a hangup, we have to stop trying the feature.
This patch fixes both issues.
Review: https://reviewboard.asterisk.org/r/4196/
........
Merged revisions 428505 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge dialplan function permission escalation via AMI and inappropriate
class authorization on the ConfbridgeStartRecord action. The CONFBRIDGE dialplan
function when executed from an external protocol (for instance AMI), could
result in a privilege escalation. Also, the AMI action “ConfbridgeStartRecord”
could also be used to execute arbitrary system commands without first checking
for system access. The AMI “ConfbridgeStopRecord” has also been updated to
only run under a system authorization.
Asterisk now inhibits the CONFBRIDGE function from being executed from an
external interface if the live_dangerously option is set to no. Also, the
“ConfbridgeStartRecord” AMI action is now only allowed to execute under a
user with system level access.
ASTERISK-24490
Reported by: Gareth Palmer
........
Merged revisions 428332 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428334 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428339 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The implementation of INVITE with Replaces in res_pjsip_refer did not expect them to
occur in-dialog. As a result it would incorrectly attempt to hang up a channel it
thought was under its control. In reality the channel would be under the control of
another thread. When the other thread accessed the channel it would be accessing freed
memory and could crash.
This change makes res_pjsip_refer not act on an in-dialog INVITE with Replaces.
ASTERISK-24528 #close
Reported by: Joshua Colp
........
Merged revisions 428304 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428305 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to the serialized architecture of chan_pjsip there exists a race condition where a CANCEL may
be received and processed before responses (such as 180 Ringing, 183 Session Progress, and 200 OK)
are sent. Since the session is in an unexpected state PJSIP will assert when this is attempted.
This change makes it so that these responses are not sent on disconnected sessions.
ASTERISK-24471 #close
Reported by: yaron nahum
........
Merged revisions 428301 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428302 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r428077 was made for ASTERISK-24522, it failed to take into account users
who are neither wait_marked nor end_marked. These users are *also* supposed to
hear the 'leader has left the conference' message. Granted, this behaviour is
a bit odd; however, that is how it used to work... and behaviour changes are
not good.
This patch ensures that if there are any 'normal' users present when the last
marked user leaves the conference, the message will still be played to them.
Note that this regression was caught by the Asterisk Test Suite's
confbridge_nominal test, which has a quirky combination of users.
........
Merged revisions 428113 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428114 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428115 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consider the following:
- A marked user in a conference
- One or more end_marked only users in the conference
When the marked users leaves, we will be in the conf_state_multi_marked state.
This currently will traverse the users, kicking out any who have the end_marked
flags. When they are kicked, a full ast_bridge_remove is immediately called on
the channels. At this time, we also unilaterally set the need_prompt flag.
When the need_prompt flag is set, we then playback a sound to the bridge
informing everyone that the leader has left; however, no one is left in the
bridge. This causes some odd behaviour for the end_marked users - they are
stuck waiting for the bridge to be unlocked. This results in them waiting for
5 or 6 seconds of dead air before hearing that they've been kicked.
Unfortunately, we do have to keep the bridge locked while we're playing back
the 'leader-has-left' prompt. If there are any wait_marked users in the
conference, this behaviour can't be easily changed - but we do make the case
of the end_marked users better with this patch.
Review: https://reviewboard.asterisk.org/r/4184/
ASTERISK-24522 #close
Reported by: Matt Jordan
........
Merged revisions 428077 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428078 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428079 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds microsecond precision when inserting a CEL record into a table
with an "eventtime" column of type timestamp, instead of second precision. The
documentation (configs/cel_odbc.conf.sample) was already saying that the
eventtime column included microseconds precision, but that was not the case.
Also, without this patch, if you had a table with an "eventtime" column of
type varchar, you had millisecond precision. With this patch, you also get
microsecond precision in this case.
Review: https://reviewboard.asterisk.org/r/3980
ASTERISK-24283 #close
Reported by: Etienne Lessard
patches:
cel_odbc_time_precision.patch uploaded by Etienne Lessard (License 6394)
........
Merged revisions 427952 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 427953 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427954 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For chan_motif the direct return value of the underlying config options framework
was passed back. This can relay various states which the module loader would not
interpet as success. It has been changed so only on errors will it report back
an error.
For chan_pjsip the code implemented a dummy reload function which always
returned an error. This has been removed as all configuration is held within
res_pjsip instead.
ASTERISK-23651 #close
Reported by: Rusty Newton
........
Merged revisions 427981 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427982 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enforces the requirements in PJSIP for session timer configuration. The minimum
expiration period must be 90 seconds or higher and the normal expiration period can not
be lower than the minimum expiration period. If either of these were done the code would
assert at session setup time.
ASTERISK-24336 #close
Reported by: Leon Rowland
........
Merged revisions 427978 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427979 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Configuration of DTLS in the general section will be applied to any users
or peers. If configuration exists at their level it overrides the general
section values.
ASTERISK-24128 #close
Reported by: Michael K.
patches:
dtls_default_settings.patch submitted by Michael K. (license 6621)
Review: https://reviewboard.asterisk.org/r/3867/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using a non-default sorcery wizard (in this instance realtime) for
outbound registrations and after adding in an appropriate call to
ast_sorcery_apply_config() (since it is missing) Asterisk will crash after
a stack overflow occurs due to the code infinitely recursing. The fix entails
removing the outbound registration state dependency from the outbound
registration sorcery object and instead keeping an in memory container that
can be used to lookup the state when needed.
ASTERISK-24514
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4164/
........
Merged revisions 427814 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427815 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427823 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
George Joseph
Joshua Colp
Richard Mudgett
Olle Johansson
Mark Michelson
Kevin Harwell
Jonathan Rose
Corey Farrell
Scott Griepentrog