In function ast_rtp_instance_early _bridge_make_compatible the
use of instance 0/1 as arguments doesn't clearly communicate a
direction that the copying of payloads from the source channel
to the destination channel will occur, making it more probable
to have the arguments to ast_rtp_codecs_payloads_copy() put in
the reverse order. This patch renames the arguments with _dst
and _src suffixes and corrects the copy direction.
(closes issue ASTERISK-21464)
Reported by: Kevin Stewart
Review: https://reviewboard.asterisk.org/r/2894/
........
Merged revisions 402000 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Test shows rtpmap:119 being copied per this change, but is not in sip invite
........
Merged revisions 402042 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402043 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often, Asterisk may realize that a change in the source of an RTP stream is
about to occur and ask that the RTP engine reset it's lock on the current RTP
source. In certain scenarios, it may take awhile for the new remote system to
send RTP packets, while the old remote system may continue providing RTP during
that time period. This causes Asterisk to re-lock onto the old source, thereby
rejecting the new source when the old source stops sending RTP and the new
source begins.
This patch prevents that by having a constant secondary, 'secret' probation
mode enabled when an RTP source has been chosen. RTP packets from other sources
are always considered, but never chosen unless the current RTP source stops
sending RTP.
Review: https://reviewboard.asterisk.org/r/2364
(closes issue AST-1124)
Reported by: John Bigelow
Tested by: John Bigelow
(closes issue AST-1125)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382573 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous fix still would look in the static_RTP_PT table, which
is inappropriate since we specifically want to find a codec that has
been negotiated.
(closes issue ASTERISK-20296)
reported by NITESH BANSAL
Patches:
codec_negotiation.patch Uploaded by NITESH BANSAL (License #6418)
........
Merged revisions 372311 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel drivers that allow native bridging need to handle
AST_CONTROL_PVT_CAUSE_CODE frames and previously did not handle them
properly, usually breaking out of the native bridge. This change
corrects that behavior and exposes the available cause code information
to the dialplan while native bridges are in place. This required
exposing the HANGUPCAUSE hash setter outside of channel.c, so
additional documentation has been added.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When remotely bridging calls with directmedia, Asterisk would check
the address of the peers/users holding directmedia ACLs (set via
directmediapermit/directmediadeny) instead of the bridged peer. This
is similar to r366547, but trunk specific and involves changes to
the rtpengine instead of just chan_sip.
(closes issue AST-876)
review: https://reviewboard.asterisk.org/r/1924/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move debug message in ast_rtp_instance_early_bridge_make_compatible() to
be output when what it states has actually happened.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CHANNEL_DEADLOCK_AVOIDANCE() feature of preserving where the channel
lock was originally obtained is overkill where ast_channel_lock_both() was
inlined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Failing to handle AST_CONTROL_UPDATE_RTP_PEER frames in the local bridge loop
causes the loop to exit prematurely. This causes a variety of negative side
effects, depending on when the loop exits. This patch handles the frame by
essentially swallowing the frame in the local loop, as the current channel
drivers expect the RTP bridge to handle the frame, and, in the case of the
local bridge loop, no additional action is necessary.
(issue ASTERISK-19040)
(issue ASTERISK-19128)
(issue ASTERISK-17725)
(issue ASTERISK-18340)
(closes issue ASTERISK-19095)
Reported by: Stefan Schmidt
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1640/
........
Merged revisions 349339 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349340 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336307 | jrose | 2011-09-16 16:09:20 -0500 (Fri, 16 Sep 2011) | 20 lines
Merged revisions 336294 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336294 | jrose | 2011-09-16 14:53:40 -0500 (Fri, 16 Sep 2011) | 13 lines
Fix bad RTP media bridges in directmedia calls on peers separated by multiple Asterisk nodes.
In a situation involving devices on separate Asterisk trunks, the remote RTP bridge would
break when starting a call with directmedia. This patch queues a new type of control frame
so that our RTP bridge loop can properly detect when these situations occur and check to see
if peers need to be updated in order to send their media to the proper location.
(Closes issue ASTERISK-18340)
Reported by: Thomas Arimont
(Closes issue ASTERISK-17725)
Reported by: kwk
Tested by: twilson, jrose
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.10
................
r328824 | kmoore | 2011-07-19 13:05:21 -0500 (Tue, 19 Jul 2011) | 18 lines
Merged revisions 328823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328823 | kmoore | 2011-07-19 12:57:18 -0500 (Tue, 19 Jul 2011) | 11 lines
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321042 | twilson | 2011-05-26 10:29:54 -0700 (Thu, 26 May 2011) | 6 lines
Initialize stack-allocated ast_sockaddrs before use
It is important to always initialize ast_sockaddrs before use--even if they
are passed to ast_sockaddr_copy as the underlying storage could be bigger
than what ends up being copied--leaving part of the data unitialized.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r310287 | alecdavis | 2011-03-11 19:47:44 +1300 (Fri, 11 Mar 2011) | 17 lines
remote_bridge_loop: prevent segfault when after transfer of IAX2 of DAHDI call
If the channel condition is one of the following after breaking out of the loop, don't try to update_peer
(where x = 0/1)
1). ZOMBIE
2). cx->tech_pvt != pvtx
3). gluex != ast_rtp_instance_get_glue(cx->tech->type))
(closes issue #18781)
Reported by: alecdavis
Patches:
bug18781.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, ZX81
Review: https://reviewboard.asterisk.org/r/1128/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Scott Griepentrog
Mark Michelson
Matthew Jordan
Richard Mudgett
Kinsey Moore
David M. Lee
Joshua Colp
Kevin P. Fleming
Jonathan Rose
Terry Wilson
Paul Belanger
David Vossel
Matthew Nicholson
Russell Bryant
Alec L Davis