Added some data to skinny packet structures to make compatible
with v17. Added protocolversion to device, set on registration
based on the version provided by device.
v17 includes some increased ip space for ip6. This patch increases
ip space in the packets but still only uses ip4. Some packet
structures duplicated (ip4 and ip6 types). ip4 type used unless
version is greater or equal to 17.
Tested by snuff and myself on 7961 with recent 8.5 firmware. Also
tested compatible with old 7960 and older 30VIPs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Increase SKINNY_MAX_PACKET to 2000 bytes to handle some messages
in v17 that are greater than the old 1000 bytes. Also add some
useful logging regarding packet and session handling.
A device (with protocol v17) was sending a packet with length
greater than 1000 which resulted in the TCP session being
destroyed and registration being retryed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340031 | wedhorn | 2011-10-10 09:18:27 +1100 (Mon, 10 Oct 2011) | 8 lines
Return -1 to skinny_session if register rejected.
If device registration is rejected, return -1 so that the session is
destroyed immediately. Previously, a segfault would occur on a
graceful shutdown if a register is rejected and the skinny_session
has not yet timed out.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r339992 | wedhorn | 2011-10-10 08:09:12 +1100 (Mon, 10 Oct 2011) | 9 lines
Remove log message on traverse session list.
On destroying a session, a list of sessions is traversed to find the
matching session. For each session not matching, skinny erroneously
logged that the session was not matched. While technically correct
the message was misleading, and tended to indicate errors that
were not there.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was an issue that the cap and confcap pointers for each line and device
were being memcpy'd so they all pointed to the same ast_format_cap. On
destroying, a segfault occured on the second call to the same struct.
skinny reload now works again as well.
Tested by snuff and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Autoanswer added to skinny based on incoming chan var SKINNY_AUTOANSWER.
Initial value must be the time to autoanswer in ms, then optionally :BEEP
to play a tone when answered and :MUTE to mute the mic when answering.
eg 3000:MUTE:BEEP will ring for 3 secs, then answer, mute the mic, and
play a beep. just 3000 would answer afer 3 secs of ringing with no
beep and full two way audio.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The do_monitor seemed to be there for task scheduling and network monitoring. However, the network monitoring has a dedicated thread so the ast_io_wait was basically just a usleep as it didn't actually seem to be monitoring anything.
Review: https://reviewboard.asterisk.org/r/1256/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Probably haven't been working for a couple of years. May still need
some more love, but they are now working, both as a hint device and
monitoring a hint. Changes centre around the long ago change
to remove the requirement for a device name in a skinny line, and
changes to the transmit_* functions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When called, activatesub first cleans up the active sub and then
handles the sub passed. dialandactivatesub first sets sub->exten
and then calls activatesub. Revise handle_offhook to utilise the
callid sent to chan_skinny. Some other minor fixes especially around
d->hookstate (which still needs some more work).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some issues where if a simple switch was cancelled and a
new switch started before the first had timed out where the d->exten
would be used for both subchannels. This was bad leading to possible
invalid extensions if some digits had been entered in the abandoned
simple switch and the second one was completed before the first timed
out, or the second would be cancelled because d->exten would be set to
nothing on the time out of the first.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidate the functions and add some debugging info. Allows to be
able to set a substate without explicitly knowing what the state is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the setsubstate_onhook to complete the initial substate handling
procedures. Added dumpsub(sub, forcehangup) which is the common way of
calling setsubstate_onhook. Dumpsub attempts to activate another sub
after setting the current one onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a call is made to a line that already has a call and the device is
offhook (ie activeish call), the call is set to CALLWAIT rather than RINGIN.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Long time coming, finally moving the hookstate from line to device.
This may fix some issues where a device has multiple lines. Previously
we had to run through all lines on a device to see if it was actually
onhook or not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
skinny_hold moved to setsubstate_hold and skinny_unhold integrated into
setsubstate_connected. Removed sub->onhold and replaced with
SUBSTATE_HOLD.
Also fixed inbound call answering by queueing an AST_CONTROL_ANSWER on
answering a SUBSTATE_RINGIN sub (was a typo).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of both state handling from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants for congestion. Added various states to
substate2str and added these states where applicable for other set_substate_
procs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317026 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of setting busy state from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants (eg busy(10); hangup() in the dialplan
now gives a busy indication for 10 secs and then hangs up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Renamed previous setsubstate_ringout to setsubstate_dialing for a state
when attempting to dial a number, substate ringout now for when core
has indicated that the channel is actually ringing on the other end.
Also added substate2str for debugging purposes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added setsubstate_ringin. skinny_call now calls sss_ringin rather than inline.
Fixed previous issue so that setsubstate_connected now use SUBSTATE_RINGIN
to determine is an AST_CONTROL_ANSWER should be queued.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the code so that skinny_answer now uses the setsubstate procedures
rather than doing the handling inline.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the working out of the callinfo to be sent into
transmit_callinfo. Replaced ambiguous sub->outgoing with calldirection
which can be SKINNY_INCOMING or SKINNY_OUTGOING (same value as the
skinny protocol).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314628 | mnicholson | 2011-04-21 13:24:05 -0500 (Thu, 21 Apr 2011) | 27 lines
Merged revisions 314620 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidates all offhook (new call with dialtone) to setsubstate_offhook. This should be roughly equivalent to existing code, although a couple of calls now run through the full offhook sequence rather than an abbreviated one.
(closes issue #17812)
Reported by: wedhorn
Patches:
cleanup.stateoffhook.diff uploaded by wedhorn (license 30)
Tested by: salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleaned up handling of onhook indications and added indications if more than one sub on device. Also fixes issue in 12324 so that the phone can call itself without locking up.
(closes issue #17692)
Reported by: jmhunter
Patches:
chan_skinny-transfer-v4.txt uploaded by DEA (license 3)
skinnytransfver.v8.diff uploaded by wedhorn (license 30)
Tested by: jmhunter, salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move call answering stuff into new setsubstate_connected. Also add sub->substate var and set it to SUBSTATE_CONNECTED in setsubstate_connected.
(closes issue #17772)
Reported by: wedhorn
Patches:
cleanup.stateconnected2.diff uploaded by wedhorn (license 30)
Tested by: wedhorn, salecha
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved inline packet sending to transmit_ subs. Removed handle_keep_alive and handle_register_message to inline in handle_message. Also moved transmit_response(d) to transmit_response_bysessions(s) and created a wrapper transmit_response(d) that calls transmit_response_bysession(d->session).
(closes issue #16980)
Reported by: wedhorn
Patches:
skinny-clean06b.diff uploaded by wedhorn (license 30)
Tested by: wedhorn, DEA
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3