allow the list of periodic announcments specified to be played in a random
order instead of being played sequentially.
(closes issue #6681)
Reported by: alt_phil
Tested by: putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109621 65c4cc65-6c06-0410-ace0-fbb531ad65f3
aastra-check-cfg is the same as the other check-cfg entries,
and aastra-xml is to load a pre-configured xml script.
(closes issue #12229)
Reported by: gowen72
Patches:
aastra.patch uploaded by gowen72 (license 432)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #9503)
Reported by: tzafrir
Patches:
fix_cleanups uploaded by tzafrir (license 46)
zapata_sections uploaded by tzafrir (license 46)
skipchannel_options uploaded by tzafrir (license 46)
conf_sample uploaded by tzafrir (license 46)
patches updated by me to better conform to coding guidelines and fix some problems
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r104119 | russell | 2008-02-25 18:25:29 -0600 (Mon, 25 Feb 2008) | 33 lines
Merge changes from team/russell/smdi-1.4
This commit brings in a significant set of changes to the SMDI support in Asterisk.
There were a number of bugs in the current implementation, most notably being that
it was very likely on busy systems to pop off the wrong message from the SMDI message
queue. So, this set of changes fixes the issues discovered as well as introducing
some new ways to use the SMDI support which are required to avoid the bugs with
grabbing the wrong message off of the queue.
This code introduces a new interface to SMDI, with two dialplan functions. First,
you get an SMDI message in the dialplan using SMDI_MSG_RETRIEVE() and then you access
details in the message using the SMDI_MSG() function. A side benefit of this is that
it now supports more than just chan_zap.
For example, with this implementation, you can have some FXO lines being terminated
on a SIP gateway, but the SMDI link in Asterisk.
Another issue with the current implementation is that it is quite common that the
station ID that comes in on the SMDI link is not necessarily the same as the Asterisk
voicemail box. There are now additional directives in the smdi.conf configuration
file which let you map SMDI station IDs to Asterisk voicemail boxes.
Yet another issue with the current SMDI support was related to MWI reporting over
the SMDI link. The current code could only report a MWI change when the change
was made by someone calling into voicemail. If the change was made by some other
entity (such as with IMAP storage, or with a web interface of some kind), then the
MWI change would never be sent. The SMDI module can now poll for MWI changes if
configured to do so.
This work was inspired by and primarily done for the University of Pennsylvania.
(also related to issue #9260)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the saying of less-than for holdtime announcements since it can lead to awkward holdtime announcements. Using
'1' as a queue-round-seconds value is no longer valid.
(closes issue #9736)
Reported by: caio1982
Patches:
queue_announce5.diff uploaded by caio1982 (license 22)
Tested by: caio1982, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #11875)
........
r101219 | qwell | 2008-01-30 09:34:37 -0600 (Wed, 30 Jan 2008) | 5 lines
Change default config to use descending channel order of groups, rather than ascending.
Fixes a potential source of confusion in glare-type situations.
Issue 11875, reported by JimVanM.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99341 | tilghman | 2008-01-21 12:11:07 -0600 (Mon, 21 Jan 2008) | 8 lines
Permit the user to specify number of seconds that a connection may remain idle,
which fixes a crash on reconnect with the MyODBC driver.
(closes issue #11798)
Reported by: Corydon76
Patches:
20080119__res_odbc__idlecheck.diff.txt uploaded by Corydon76 (license 14)
Tested by: mvanbaak
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add support for multiple devices. All devices are configured in console.conf.
- Add "console list devices" CLI command to show configured devices. Also, changed
the old "list devices" to be "list available", which queries PortAudio for all
audio devices that are available for use.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the HTTP request for the config came in on and the SERVER_PORT to the
bindport setting in sip.conf. I've left in the ability to override these
options, because I can't always guess how someone might decide to do something
weird with what is available to them--although needing to is pretty unlikely.
Documentation was updated to reflect preference for not setting serveraddr,
serveriface, or serverport. Tested on Linux and OS X.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces SIP session timers support (RFC 4028). In short,
this prevents stuck SIP sessions that were not properly torn down due to network
or endpoint failures during an established SIP session.
To quote some of the documentation supplied with the patch:
"The SIP Session-Timers is an extension of the SIP protocol that allows end-points and proxies to
refresh a session periodically. The sessions are kept alive by sending a RE-INVITE or UPDATE
request at a negotiated interval. If a session refresh fails then all the entities that support Session-
Timers clear their internal session state. In addition, UAs generate a BYE request in order to clear
the state in the proxies and the remote UA (this is done for the benefit of SIP entities in the path
that do not support Session-Timers)."
(closes issue #10665)
Reported by: rjain
Patches:
chan_sip.c.1.diff uploaded by rjain (license 226)
chan_sip.c.diff uploaded by rjain (license 226)
sip.conf.sample.diff uploaded by rjain (license 226)
proc_422_rsp_comment.diff uploaded by rjain (license 226)
chan_sip.c.cache.diff uploaded by rjain (license 226)
chan_sip.memalloc uploaded by rjain (license 226)
chan_sip.memalloc.bugfix uploaded by rjain (license 226)
Patches tracked in team/group/sip_session_timers, with some additional fixes
by russell and oej.
Tested by: jtodd, rjain, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to set the qualify frequency.
(closes issue #11597)
Reported by: wilder
Patches:
qualifyfreq5.patch uploaded by wilder (license 362)
-- with some mods by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
will monitor this second device's state for the member, even though it actually calls the first
interface. This ability has been added for statically defined queue members, realtime queue members,
and dynamic queue members added through the CLI, dialplan, or manager.
(closes issue #11603, reported by acidv)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(this implementation is not very memory efficient as the parameters and their values will be duplicated for each channel that has the same settings, but we can worry about that later once it is working)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add a new console channel driver, chan_console, which is a console channel
driver that uses portaudio as a cross platform audio interface. It was written
to provide a console channel driver that works with Mac CoreAudio, but it
supports a number of other audio interfaces, as well, including OSS and ALSA.
It could one day be the single console channel driver, but does not yet have
as many features as chan_oss.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
from 'keypad_entry' to 'region'. Fix the example file accordingly.
Also make some fixes in the code do reset entries on reload of the keypad.
The recently committed kpad2.jpg has the correct names.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the QUEUE_MAX_PENALTY and the newly introduced QUEUE_MIN_PENALTY during a call depending
on the amount of time passed. The purpose is to allow the call to open up to more (or maybe
just different) members without the caller's losing his place in the queue. See
configs/queuerules.conf.sample for an example of how to set up queue rules and configs/queues.conf.sample
for how to associate a rule with a queue.
Along with the functional changes, new CLI and manager commands exist to show the rules defined and
there is an additional CLI command to reload the queue rules.
Future enhancements that may be made: support for realtime queue rules and support for dynamically adding
a rule through the manager or CLI. Also a manager command to reload the queue rules (I'll probably write
this myself very soon).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by adding an exclamation mark to the dial string.
This patch also exists for 1.4 in the fixtoheader-1.4 branch
and has been in production for quite some time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces two new options for zapata.conf: mwimonitor and mwimonitornotify.
The mwimonitor option enables MWI monitoring. When the MWI state on a line changes,
then the script specified by mwimonitornotify will be executed for custom handling
of the state change, similar to the externnotify option of voicemail.conf.
Also, when the MWI state on an FXO line changes, an internal Asterisk event is
generated to indicate the new state of the associated mailbox. That may, any
module that cares about MWI information will get notified and can handle it
just as if app_voicemail had sent this notification.
(BE-253, original patch from markster, with some minor modifications by me to
add comments, documentation, and internal event support)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. When moh is started, we search first in memory to find the class. If we do not
find it in memory, we search realtime instead.
2. When moh is restarted (as in, it had been started on this particular channel, stopped,
and now we're starting it again), if using the "files" mode, then realtime will always
be rechecked. If you are using other modes, however, we will simply reattach to the external
running process which was playing moh earlier in the call. This is a necessary compromise so that
we don't end up with too many background processes.
3. musiconhold.conf has a general section now. It has one option: cachertclasses. If set to yes,
then moh classes found in realtime will be added to the in-memory list. This has the advantage
of not requiring database lookups each time moh is started, but it has the disadvantage of not
truly being realtime.
I have tested this for functionality, and it passes. I also tested this under valgrind and there
are no memory problems reported under typical use.
Special thanks to Sergee for implementing this feature and enduring my complaints on the bugtracker!
(closes issue #11196, reported and patched by sergee)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89622 | murf | 2007-11-26 23:24:02 -0700 (Mon, 26 Nov 2007) | 1 line
closes issue #11379; OK, this is an attempt to make both sides happy. To the cdr.conf file, I added the option 'unanswered', which defaults to 'no'. In this mode, you will see a cdr for a call, whether it was answered or not. The disposition will be NO ANSWER or ANSWERED, as appropriate. The src is as you'd expect, the destination channel will be one of the channels from the Dial() call, usually the last in the list if more than one chan was specified. With unanswered set to 'yes', you will still see this cdr entry in both cases. But in the case where the dial timed out, you will also see a cdr for each line attempted, marked NO ANSWER, with no destination channel name. The new option defaults to 'no', so you don't see the pesky extra cdr's by default, and you will not see the irritating 'not posted' messages.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89559 | tilghman | 2007-11-25 11:17:10 -0600 (Sun, 25 Nov 2007) | 14 lines
We previously attempted to use the ESCAPE clause to set the escape delimiter to
a backslash. Unfortunately, this does not universally work on all databases,
since on databases which natively use the backslash as a delimiter, the
backslash itself needs to be delimited, but on other databases that have no
delimiter, backslashing the backslash causes an error.
So the only solution that I can come up with is to create an option in res_odbc
that explicitly specifies whether or not backslash is a native delimiter. If
it is, we use it natively; if not, we use the ESCAPE clause to make it one.
Reported by: elguero
Patch by: tilghman
(Closes issue #11364)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
way of handling DTMF in SIP. Totally undocumented, but implemented
in enough devices so we have to support it.
Code by sergee, small changes by oej.
Closes issue #11049
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89173 | crichter | 2007-11-12 12:26:48 +0100 (Mo, 12 Nov 2007) | 1 line
if we're NT and no number was dialed and overlapdial is set, we wait for the ISDN timeout instead of starting our own timer. added a comment for the misdn.conf.sample for the overlapdial config option.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89169 | crichter | 2007-11-12 10:45:36 +0100 (Mo, 12 Nov 2007) | 1 line
aded ntkeepcalls option, to avoid droÃpping calls when the L2 goes down on a PTP link. There are some pbx which do turn off the L1 for a very short while and restart it immediately. normally T310 should be started and after 10 seconds or so the calls should be dropped, this is a simple fix wihtout this timer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was mistakenly deleted in 1.4 without ever being merged to trunk.
Reported by eliel on #asterisk-dev.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
phones to be rung in a specific order.
(closes issue #7279, reported and initially patched by diLLec, patch reworked by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: ruffle
Patches:
app_voicemail.c.diff uploaded by ruffle (license 201)
10739-moveheard.diff uploaded by qwell (license 4)
Tested by: callguy, ruffle
Add an option to disable the automatic moving of "heard" messages to the Old folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82871 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snar
Patches:
app-queue-cdr-trunk.patch uploaded by snar (license 245)
queues.conf.patch uploaded by snar (license 245)
Add an updatecdr option to queues.conf, so that if a "member name" is specified,
the cdr record will be updated with that, rather than the channel.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82800 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: junky
Patches:
register_trying.diff.txt uploaded by jcmoore
Disable sending 100 Trying on REGISTER attempts and make it an option. This has been signed off by oej.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ extensive documentation changes both in sip.conf.sample and in the source;
+ allow "externip" and "externhost" to include a port number as well;
+ allow "bindaddr" to have a port number (making bindport unnecessary,
even though it is still present for backward compatibility);
+ introduce the new "stunaddr" parameter to specify an STUN server to
be used from the main SIP socket;
+ extend the "sip show settings" output to show all the above.
Internally:
+ change related data structures from struct in_addr to struct sockaddr_in
to store the port numbers as well;
+ reorganize ast_sip_ouraddrfor() (should also be renamed to sip_ouraddrfor()
because it is not a generic API, though it might become so if called with
a socket as an additional argument, in which case it can be moved elsewhere).
As mentioned in the documentation, media sessions still do not use STUN so the
port numbers may still be incorrect when Asterisk is behind a NAT
On passing, some of the debugging messages printing media addresses are
probably using the wrong values, but this will be checked/fixed in a
subsequent commit if needed.
Part of the following chunk in the function that handles a "sip reload" is
probably needed on previous versions as well, to avoid leaking the memory
used for the "localaddr" list:
@@ -17244,13 +17274,17 @@
/* Reset IP addresses */
memset(&bindaddr, 0, sizeof(bindaddr));
+ memset(&stunaddr, 0, sizeof(stunaddr));
+ memset(&internip, 0, sizeof(internip));
+ /* Free memory for local network address mask */
+ ---> ast_free_ha(localaddr); <-----
memset(&localaddr, 0, sizeof(localaddr));
memset(&externip, 0, sizeof(externip));
memset(&default_prefs, 0 , sizeof(default_prefs));
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature may be turned on by adding imapgreetings=yes to the general section of voicemail.conf
voicemail.conf.sample has details on the options added.
As a result, IMAP storage now has RETRIEVE and DISPOSE macros defined.
In addition to the IMAP greeting changes, I also have added an enum for the voicemail folders
and so now the code should be easier to understand and maintain when it comes to this area.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also adds a new "reporting" permission for manager, since it can be incredibly spammy.
This permission was discussed on the -dev mailing list some months back.
Issue 8613, patch by johann8384, with some minor changes by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@70961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
disclaimer along with SIP messages in the header, X-Disclaimer. This is off by
default. Also, the text of the disclaimer can be customized in sip.conf.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
features.conf. This allows you to create a feature one time, and then map it
into groups for various different key mappings for the same feature, as well
as easy access control to groups of features.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
class in musiconhold.conf, a caller on hold may press this digit to switch
to listening to that music class.
This involved adding a new callback for generators, which allow generators
to get notified of DTMF from the channel they are running on. Then, a callback
was implemented for the music on hold generators.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
add some new options to control what happens when you hangup on an attended
transfer before the target extension answers the transferred channel. You
can now have it send the transferee back to the transferer.
(issue #8413, patch from sergee with very minor modifications by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces a new generic event API for use within Asterisk.
I am still working on a way for events to be shared between servers, but this
part is ready and can already be used inside of Asterisk.
This set of changes introduces the first use of the API, as well. I have
restructured the way that MWI (message waiting indication) is handled. It is
now event based instead of polling based. For example, if there are a bunch
of SIP phones subscribed to mailboxes, then chan_sip will not have to
constantly poll the mailboxes for changes. app_voicemail will generate events
when changes occur.
See UPGRADE.txt and CHANGES for some more information on the effects of these
changes from the user perspective. For developer information, see the text in
include/asterisk/event.h.
As always, additional feedback is welcome on the asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
minimum amount of time between queue announcements for use when the caller's queue
position changes frequently.
(issue #9604, patch by Matthew Roth)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
blocks instead of one large monolithic app. Supports multiple templates
and is designed mostly for voicemail delivery over e-mail.
There's a todo with a list of ideas in the source code if you want
to contribute. Feedback is appreciated!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58894 | russell | 2007-03-14 11:33:01 -0500 (Wed, 14 Mar 2007) | 8 lines
By default, don't attempt to do any CallerID handling at all with SLA because
it is known to not work properly in some situations. However, add an option to
enable it for those that would like to use it anyway.
The short story behind this is that to properly handle CallerID with SLA, we
need the ability to change the CallerID on an existing call, and we are not
ready to handle that.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add new module, cdr_sqlite3_custom which allows logging custom CDRs into a
SQLite3 database. (issue #7149, alerios)
* Add new module, res_config_sqlite, which adds realtime database configuration
support for SQLite version 2. I decided that this was ok since we didn't have
any realtime support for version 3. If someone ports this to version 3, then
version 2 support can be removed or marked deprecated.
(issue #7790, rbarun_proformatique)
* Mark cdr_sqlite as deprecated in favor of cdr_sqlite3_custom.
Also, note that there were other modules on the bug tracker that did not make
the cut because they provided some duplicated functionality. Those are:
* cdr_sqlite3 (issue #6754, moy)
* cdr_sqlite3 (issue #8694, bsd)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58779 | file | 2007-03-11 20:51:16 -0400 (Sun, 11 Mar 2007) | 2 lines
Add matchexterniplocally setting which only substitutes your externip/externhost setting if it matches the localnet setting. I know of at least two people who need opposite settings, so I made it an option! (issue #8821 reported by kokoskarokoska)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58780 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This can be done using a global variable or a dialplan function. Using the
SHELL() function will allow you to use an external script to determine what the
weight in the response should be. This can be very useful in load balancing
applications.
(inspired by discussions with blitzrage and jsmith in #asterisk-bugs)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r57364 | russell | 2007-03-01 17:42:53 -0600 (Thu, 01 Mar 2007) | 16 lines
Merge changes from svn/asterisk/team/russell/sla_updates
* Originally, I put in the documentation that only Zap interfaces would be
supported on the trunk side. However, after a discussion with Qwell, we came
up with a way to make IP trunks work as well, using some things already in
Asterisk. So, here it is, this now officially supports IP trunks.
* Update the SLA documentation to reflect how to setup IP trunks.
* Add a section in sla.txt that describes how to set up an SLA system with
voicemail.
* Simplify the way DTMF passthrough is handled in MeetMe.
* Fix a bug that exposed itself when using a Local channel on the trunk side
in SLA. The station's channel needs to be passed to the dial API when
dialing the trunk.
* Change a WARNING message to DEBUG in channel.h. This message is of no use
to users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@57365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r57203 | russell | 2007-02-28 16:07:05 -0600 (Wed, 28 Feb 2007) | 7 lines
Merge more changes from svn/asterisk/team/russell/sla_updates
* Add support for private hold. By setting "hold=private" for a trunk, only
the station that put the call on hold will be able to retrieve it from hold.
Also, by setting "hold=private" for a station, any call that station puts
on hold can only be retrieved by that station.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@57204 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r57144 | russell | 2007-02-28 13:56:20 -0600 (Wed, 28 Feb 2007) | 6 lines
Merge changes from svn/asterisk/team/russell/sla_updates
* Add support for the "barge=no" option for trunks. If this option is set,
then stations will not be able to join in on a call that is on progress
on this trunk.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@57145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r57089 | russell | 2007-02-28 12:20:05 -0600 (Wed, 28 Feb 2007) | 8 lines
Merge current set of changes from svn/asterisk/team/russell/sla_updates
* Add support for station ring delays. Ring delays can be set globally for a
station or for specific trunks on the station.
* Fix a few bugs in existing code.
* Restructure and Reorganize code to improve readability and maintainability.
* Improve formatting of the "sla show (trunks|stations)" CLI commands.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@57090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
See skinny.conf.sample for configuration example.
Note: Some devices (seen on 12SP+/30VIP) will lock up if they monitor too many hints.
This seems to be a hardware limitation - there isn't anything we can do about it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r56277 | russell | 2007-02-22 17:08:36 -0600 (Thu, 22 Feb 2007) | 18 lines
Merge changes from team/russell/sla_updates.
This batch of changes to the SLA code does a few different things.
* I made the SLA code event driven instead of having to act in a lot of busy
loops while dialing things to wait for state changes. This makes the code
more efficient and readable at the same time.
* I have implemented a couple of new features. The first is inbound trunk
ringing timeouts. This is an option that defines how long to let an incoming
call on a trunk to ring.
* I have also implemented ring timeouts for stations. They may be specified
for the entire station, meaning it is how long to let the station ring before
giving up. You can also specify a ring timeout for a specific trunk on a
station. So, you can say that you only want a specific station to ring 5
seconds if it is line1 ringing, but otherwise, there is no timeout.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r55006 | russell | 2007-02-16 16:49:42 -0600 (Fri, 16 Feb 2007) | 17 lines
Merged revisions 55005 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r55005 | russell | 2007-02-16 16:48:22 -0600 (Fri, 16 Feb 2007) | 9 lines
Revert the change I did in revisions 54955, 54969, and 54970, in 1.2, 1.4,
and trunk. I decided that once a conference is created from meetme.conf,
it is acceptable behavior that the pin can not be changed until the
conference goes away. I also added a note in meetme.conf to describe this
behavior.
We still have another issue in 1.4 and trunk where some conferences with no
users don't go away. That is the real bug that needs to be addressed here.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@55007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
