respectively. Also, take the opportunity to clean up the CLI prompt
generation code.
(closes issue #13175)
Reported by: eliel
Patches:
cliprompt.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132645 | oej | 2008-07-22 22:10:26 +0200 (Tis, 22 Jul 2008) | 9 lines
The most common question on the #asterisk iRC channel and on mailing lists
seems to be in regards to an error message when retransmit fails. This
is frequently misunderstood as a failure of Asterisk, not a failure of
the network to reach the other party.
This document tries to assist the Asterisk user in sorting out these
issues by explaining the logic and pointing at some possible
causes. Hopefully, we will get other questions now :-)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
To make sure nobody commits script-modified files we first make a backup
of asterisk.tex, run the script, generate the pdf and / or html,
and put the original asterisk.tex back.
This will guard us for the stuff that happened before that someone committed
a locally modified asterisk.tex, with changes done by this script.
(closes issue #13062)
Reported by: mvanbaak
Patches:
sed_without-i-v3.diff uploaded by mvanbaak (license 7)
Tested by: mvanbaak
Feedback from Corydon. Thanks for taking the time to go through this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This section covers some locking fundamentals, as well as some information on
locking as it is used in Asterisk. It describes some of the ways that are used
and could be used to achieve deadlock avoidance. It also demonstrates the
unfortunate conclusion that with the use of recursive locks, none of the
constructs in use today are failsafe from deadlocks. Finally, it makes some
recommendations for new code being written. As proper locking strategies is a
complex subject, this section still has room for expansion and improvement.
This is a result of collaboration between Luigi Rizzo and myself on the
asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
FreeTDS 0.60. Update the docs to reflect that we can now compile and run
against all modern releases of FreeTDS (0.60 through 0.82)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126513 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit merges in the rest of the code needed to support distributed device
state. There are two main parts to this commit.
Core changes:
- The device state handling in the core has been updated to understand device
state across a cluster of Asterisk servers. Every time the state of a device
changes, it looks at all of the device states on each node, and determines the
aggregate device state. That resulting device state is what is provided to
modules in Asterisk that take actions based on the state of a device.
New module, res_ais:
- A module has been written to facilitate the communication of events between
nodes in a cluster of Asterisk servers. This module uses the SAForum AIS
(Service Availability Forum Application Interface Specification) CLM and EVT
services (Cluster Management and Event) to handle this task. This module
currently supports sharing Voicemail MWI (Message Waiting Indication) and
device state events between servers. It has been tested with openais, though
other implementations of the spec do exist.
For more information on testing distributed device state, see the following doc:
- doc/distributed_devstate.txt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #12705)
Reported by: ctooley
Patches:
new_externalivr_argument_format-v2.diff uploaded by ctooley (license 136)
new_externalivr_documentation.diff uploaded by ctooley (license 136)
and a few additional fixes by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds some new features to the SMDI_MSG_RETRIEVE() dialplan function.
Previously, this function only allowed searching by the forwarding station.
I have added some options to allow you to also search for messages in the queue
by the message desk terminal ID, as well as the message desk number.
This originally came up as a suggestion on the asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: atis
Tested by: murf
This upgrade adds the ~~ (concatenation) string operator to expr2.
While not needed in normal runtime pbx operation, it is needed when
raw exprs are being syntax checked. This plays into future syntax-
unification plans. By permission of atis, this addition in trunk
and the reason of why things are as they are will suffice to close
this bug.
I also added a short note about the previous addition of "sip show sched"
to the CLI in CHANGES, which I discovered I forgot in a previous commit.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an attended transfer over AMI
(closes issue #10585)
Reported by: ornati
Patches:
atxfer-trunk-r90428.diff uploaded by ornati (license 210)
(with modifications from me)
Tested by: putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
that if we keep this in the tree, it will be much easier to keep up to date.
The page on asterisk.org just links to this on svn.digium.com/view
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104419 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103722 | mmichelson | 2008-02-15 11:26:37 -0600 (Fri, 15 Feb 2008) | 8 lines
Final round of changes for configure script logic for IMAP
Now if a directory is specified, then we will search that directory for
a source installation of the IMAP toolkit. If none is found, then we will
use that directory as the basis for detecting a package installation of
the IMAP c-client. If that check fails, then configure will fail.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the HTTP request for the config came in on and the SERVER_PORT to the
bindport setting in sip.conf. I've left in the ability to override these
options, because I can't always guess how someone might decide to do something
weird with what is available to them--although needing to is pretty unlikely.
Documentation was updated to reflect preference for not setting serveraddr,
serveriface, or serverport. Tested on Linux and OS X.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
run "make asterisk.pdf" when not all of the right packages are installed.
(closes issue #10763)
Reported by: Corydon76
Patches:
20070919__bug10763.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
go a long way towards preventing unexplainable hangs experienced by people. In the
case of MWI hangs, this also will mean that the SIP port isn't blocked anymore.
(closes issue #11665, reported by yehavi)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the QUEUE_MAX_PENALTY and the newly introduced QUEUE_MIN_PENALTY during a call depending
on the amount of time passed. The purpose is to allow the call to open up to more (or maybe
just different) members without the caller's losing his place in the queue. See
configs/queuerules.conf.sample for an example of how to set up queue rules and configs/queues.conf.sample
for how to associate a rule with a queue.
Along with the functional changes, new CLI and manager commands exist to show the rules defined and
there is an additional CLI command to reload the queue rules.
Future enhancements that may be made: support for realtime queue rules and support for dynamically adding
a rule through the manager or CLI. Also a manager command to reload the queue rules (I'll probably write
this myself very soon).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
much identical to the S() and L() options to Dial(). They let you set
timeouts for the conference, as well as have warning sounds played to
let the caller know how much time is left, and when it is running out.
(closes issue #8030)
Reported by: areski
Patches:
meetme_timeout_timelimit_v2.patch uploaded by areski (license 29)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Many uses of the astlisting environment around verbatim text to ensure that
it gets properly formatted and doesn't run off the page.
- Update some things that have been deprecated.
- Add escaping as needed
- and more ...
(closes issue #10978)
Reported by: IgorG
Patches:
texdoc-85542-1.patch uploaded by IgorG (license 20)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Added development section (backtrace.tex)
- Correct filesystem path formating
- Replace all "|" argument separator to ","
- Endless count of spaces at the end of line
- Using astlisting to make listings do not take so much place
- Take back ASTRISKVERSION on first page
- Make localchannel.tex readable by inserting extra end of lines
(closes issue #10962)
Reported by: IgorG
Patches:
texdoc-85177-1.patch uploaded by IgorG (license 20)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in the Dial command. The 'j' option _must_ be used in conjunction with the 'n'
option.
This feature will allow you to use the existing jitterbuffer implementation to
put a jitterbuffer on incoming SIP calls connecting to Asterisk applications by
putting a local channel in the middle.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85097 65c4cc65-6c06-0410-ace0-fbb531ad65f3