https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318148 | jrose | 2011-05-09 09:18:14 -0500 (Mon, 09 May 2011) | 4 lines
Documenting an observed behavior of features in features.conf. Since parkinglots use an
integer for the parkinglot extensions, leading zeros specified in the configuration file
are ignored.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286931 | jpeeler | 2010-09-15 14:22:15 -0500 (Wed, 15 Sep 2010) | 16 lines
Add parking extension for non-default parking lots.
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for this option did not match the code. Fix that along with
some minor cleanups to the code along the way. Document a slight change in
behavior (to something that was previously undocumented) in UPGRADE.txt.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge handling code did not properly consider feature groups when setting
parameters that would affect whether or not a native bridge would be attempted.
If DYNAMIC_FEATURES only include a feature group, a native bridge would occur
that may prevent features from working.
Fix a bug in verbose output that would show the key mapping as empty if it was
using the default mapping and not a custom mapping in the feature group.
Add feature groups to the output of "features show".
Adjust the feature execution logic to match that of the logic when executing
a feature that was not configured through a feature group.
Update features.conf.sample to show that an '=' is still required if using
the default key mapping from [applicationmap].
Finally, clean up a little bit of formatting to better coform to coding
guidelines while in the area.
(closes issue #17589)
Reported by: lmadsen
Patches:
issue_17589.rev4.txt uploaded by russell (license 2)
Tested by: russell, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Application arguments within the feature map could possibly contain a comma,
which conflicts with the syntax of the features.conf configuration file. This
patch allows the argument to be wrapped in parentheses or quoted, to allow the
application arguments to be interpreted as a single configuration parameter.
(closes issue #16646)
Reported by: pinga-fogo
Patches:
20100414__issue16646.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature allows for parkinglots to be created dynamically within
the dialplan. Thanks to all who were involved with getting this patch
written and tested!
(closes issue #15135)
Reported by: IgorG
Patches:
features.dynamic_park.v3.diff uploaded by IgorG (license 20)
2009090400_dynamicpark.diff.txt uploaded by mvanbaak (license 7)
dynamic_parkinglot.diff uploaded by dvossel (license 671)
Tested by: eliel, IgorG, acunningham, mvanbaak, zktech
Review: https://reviewboard.asterisk.org/r/352/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Let's try that again, this time removing trailing whitespace and not leading
whitespace. I can't believe no one noticed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the low default value of featuredigittimeout, I decided it
was high time to change it. I have changed the default to
2000 ms based on a suggestion from Leif Madsen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152538 | murf | 2008-10-28 23:19:04 -0600 (Tue, 28 Oct 2008) | 14 lines
A little documentation cross-ref between features and
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
features.conf. This allows you to create a feature one time, and then map it
into groups for various different key mappings for the same feature, as well
as easy access control to groups of features.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
add some new options to control what happens when you hangup on an attended
transfer before the target extension answers the transferred channel. You
can now have it send the transferee back to the transferer.
(issue #8413, patch from sergee with very minor modifications by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Jonathan Rose
Jeff Peeler
Russell Bryant
Tilghman Lesher
David Vossel
Sean Bright
Mark Michelson
Steve Murphy
Terry Wilson
Brett Bryant
Joshua Colp
Olle Johansson
Jason Parker
Kevin P. Fleming
Matt O'Gorman
BJ Weschke
Josh Roberson
Mark Spencer
Anthony Minessale II