https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r304950 | tilghman | 2011-01-31 00:41:36 -0600 (Mon, 31 Jan 2011) | 18 lines
Change mutex tracking so that it only consumes memory in the core mutex object when it's actually being used.
This reduces the overall size of a mutex which was 3016 bytes before this back
down to 216 bytes (this is on 64-bit Linux with a glibc-implemented mutex).
The exactness of the numbers here may vary slightly based upon how mutexes are
implemented on a platform, but the long and short of it is that prior to this
commit, chan_iax2 held down 98MB of memory on a 64-bit system for nothing more
than a table of 32767 locks. After this commit, the same table occupies a mere
7MB of memory.
(closes issue #18194)
Reported by: job
Patches:
20110124__issue18194.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/1066
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r304638 | seanbright | 2011-01-28 15:19:08 -0500 (Fri, 28 Jan 2011) | 11 lines
Restore some conditionals that we lost in r277814.
There are some cases where ast_append_ha() is called with a NULL instead of a
valid int pointer. So if we get a NULL, don't try to dereference it.
(closes issue #18162)
Reported by: imcdona
Patches:
issue0018162.patch uploaded by pabelanger (license 224)
Tested by: enegaard
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304097 | seanbright | 2011-01-25 20:26:26 -0500 (Tue, 25 Jan 2011) | 19 lines
Merged revisions 304096 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r304096 | seanbright | 2011-01-25 20:24:58 -0500 (Tue, 25 Jan 2011) | 12 lines
Per the man page, setvbuf() must be called before any other operation on an open file.
We use setvbuf() to associate a buffer with a stream, but we have already written
to the open file. This works (by chance) on Linux, but fails on other platforms,
such as OpenSolaris.
(closes issue #16610)
Reported by: bklang
Patches:
setvbuf.patch uploaded by crjw (license 963)
Tested by: bklang, asgaroth, efutch
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304007 | rmudgett | 2011-01-25 17:28:25 -0600 (Tue, 25 Jan 2011) | 22 lines
Merged revisions 304006 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r304006 | rmudgett | 2011-01-25 17:25:32 -0600 (Tue, 25 Jan 2011) | 15 lines
Merged revisions 304005 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r304005 | rmudgett | 2011-01-25 17:21:09 -0600 (Tue, 25 Jan 2011) | 8 lines
DTMF attended transfers sometimes fail for no apparent reason.
The loop in feature_request_and_dial() can exit when Party C has answered
without processing an AST_CONTROL_ANSWER. Also sometimes an
AST_CONTROL_ANSWER never happens even though Party C has answered.
Don't hangup Party C if he is up or we receive an AST_CONTROL_ANSWER.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303549 | russell | 2011-01-24 14:51:37 -0600 (Mon, 24 Jan 2011) | 45 lines
Merged revisions 303548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303548 | russell | 2011-01-24 14:49:53 -0600 (Mon, 24 Jan 2011) | 38 lines
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines
Fix channel redirect out of MeetMe() and other issues with channel softhangup.
Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped
working properly. This issue includes a patch that resolves the issue by
removing a call to ast_check_hangup() from app_meetme.c. I left that in my
patch, as it doesn't need to be there. However, the rest of the patch fixes
this problem with or without the change to app_meetme.
The key difference between what happens before and after this patch is the
effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(),
ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme
sees this which causes it to exit as intended. Checking ast_check_hangup()
caused app_meetme to exit earlier in the process, and the target of the
redirect saw the condition where ast_read() returned NULL.
Removing ast_check_hangup() works around the issue in app_meetme, but doesn't
solve the issue if another application did the same thing. There are also
other edge cases where if an application finishes at the same time that a
redirect happens, the target of the redirect will think that the channel hung
up. So, I made some changes in pbx.c to resolve it at a deeper level. There
are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to
abort the hangup process. My patch extends this to remove the END_OF_Q frame
from the channel's read queue, making the "abort hangup" more complete. This
same technique was used in every place where a softhangup flag was cleared.
(closes issue #18585)
Reported by: oej
Tested by: oej, wedhorn, russell
Review: https://reviewboard.asterisk.org/r/1082/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303153 | rmudgett | 2011-01-20 14:31:20 -0600 (Thu, 20 Jan 2011) | 22 lines
Merged revision 303098 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r303098 | rmudgett | 2011-01-20 12:11:45 -0600 (Thu, 20 Jan 2011) | 15 lines
CC_INTERFACES does not get built correctly with local channels.
If local channels are used with CCSS, CC_INTERFACES gets garbage prepended
to it so the CC recall fails. Also CC_INTERFACES gets "&(null)" appended
to it.
* Initialize the buffer to eliminate the prepended garbage.
* Filter out the empty interface strings to eliminate the latter.
* Added a diagnostic message if the CC_INTERFACES is ever empty.
JIRA ABE-2740
JIRA SWP-2848
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303107 | sruffell | 2011-01-20 13:57:31 -0600 (Thu, 20 Jan 2011) | 23 lines
Merged revisions 303106 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r303106 | sruffell | 2011-01-20 13:56:34 -0600 (Thu, 20 Jan 2011) | 15 lines
main/features: Use POLLPRI when waiting for events on parked channels.
This change resolves a regression in the 1.6.2 when converting from
select to poll. The DAHDI timers use POLLPRI to indicate that the timer
fired, but features was not waiting for that flag. The result was no
audio for MOH when a call was parked and res_timing_dahdi was in use.
This patch is slightly modified from the one on the mantis issue. It does
not set an exception on the channel if the POLLPRI flag is set.
(closes issue #18262)
Reported by: francesco_r
Patches:
patch_park_moh-trunk-2.txt uploaded by cjacobsen (license 1029)
Tested by: francesco_r, rfrantik, one47
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r302785 | russell | 2011-01-19 16:35:15 -0600 (Wed, 19 Jan 2011) | 15 lines
Resolve a memory leak with the manager interface is disabled.
The intent of this check as it stands in previous versions of Asterisk was to
check if there are any active sessions. If there were no sessions, then the
function would return immediately and not bother with queueing up the manager
event to be processed. Since the conversion of storing sessions in an astobj2
container, this check will always pass. I changed it to go back to checking
what was intended.
The side effect of this was that if the AMI is disabled, the manager event
queue is populated anyway, but the code that runs to clear out the queue
never runs. A producer with no consumer is a bad thing.
Reported internally by kmorgan.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302786 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302713 | rmudgett | 2011-01-19 15:29:22 -0600 (Wed, 19 Jan 2011) | 29 lines
Merged revisions 302693 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302693 | rmudgett | 2011-01-19 15:25:41 -0600 (Wed, 19 Jan 2011) | 22 lines
Merged revisions 302671 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302671 | rmudgett | 2011-01-19 15:21:56 -0600 (Wed, 19 Jan 2011) | 15 lines
DTMF transfer plays the wrong sounds for wrong number or other call failure.
* Set the default for features.conf.sample xferfailsound option to "beeperr"
as documented instead of "pbx-invalid" and corrected the use of it in DTMF
blind transfer (#1).
* Improved DTMF blind transfer handling of wrong numbers.
Most of the concerns in this issue were taken care of by the patch for
issue 17999: Issues with DTMF triggered attended transfers.
(closes issue #18379)
Reported by: gincantalupo
Tested by: rmudgett
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302634 | tilghman | 2011-01-19 14:24:57 -0600 (Wed, 19 Jan 2011) | 22 lines
Merged revisions 302599 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302599 | tilghman | 2011-01-19 14:13:24 -0600 (Wed, 19 Jan 2011) | 15 lines
Kill zombies.
When we ast_safe_fork() with a non-zero argument, we're expected to reap our
own zombies. On a zero argument, however, the zombies are only reaped when
there aren't any non-zero forked children alive. At other times, we
accumulate zombies. This code is forward ported from res_agi in 1.4, so that
forked children are always reaped, thus preventing an accumulation of zombie
processes.
(closes issue #18515)
Reported by: ernied
Patches:
20101221__issue18515.diff.txt uploaded by tilghman (license 14)
Tested by: ernied
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302555 | seanbright | 2011-01-19 14:03:32 -0500 (Wed, 19 Jan 2011) | 14 lines
Merged revisions 302554 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302554 | seanbright | 2011-01-19 14:02:29 -0500 (Wed, 19 Jan 2011) | 7 lines
Don't call strlen() when we only need to look at the next character or two.
(closes issue #18042)
Reported by: wdoekes
Patches:
astsvn-inefficient-ast-uri-decode.patch uploaded by wdoekes (license 717)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302266 | jpeeler | 2011-01-18 14:19:57 -0600 (Tue, 18 Jan 2011) | 34 lines
Merged revisions 302265 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302265 | jpeeler | 2011-01-18 14:13:52 -0600 (Tue, 18 Jan 2011) | 27 lines
Convert device state callbacks to ao2 objects to fix a deadlock in chan_sip.
Lock scenario presented here:
Thread 1
holds ast_rdlock_contexts &conlock
holds handle_statechange hints
holds handle_statechange hint
waiting for cb_extensionstate
Locked Here: chan_sip.c line 7428 (find_call)
Thread 2
holds handle_request_do &netlock
holds find_call sip_pvt_ptr
waiting for ast_rdlock_contexts &conlock
Locked Here: pbx.c line 9911 (ast_rdlock_contexts)
Chan_sip has an established locking order of locking the sip_pvt and then
getting the context lock. So the as stated by the summary, the operations in
thread 2 have been modified to no longer require the context lock.
(closes issue #18310)
Reported by: one47
Patches:
statecbs_ao2.mk2.patch uploaded by one47 (license 23),
modified by me
Review: https://reviewboard.asterisk.org/r/1072/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302174 | rmudgett | 2011-01-18 12:11:43 -0600 (Tue, 18 Jan 2011) | 102 lines
Merged revisions 302173 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302173 | rmudgett | 2011-01-18 12:07:15 -0600 (Tue, 18 Jan 2011) | 95 lines
Merged revisions 302172 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302172 | rmudgett | 2011-01-18 12:04:36 -0600 (Tue, 18 Jan 2011) | 88 lines
Issues with DTMF triggered attended transfers.
Issue #17999
1) A calls B. B answers.
2) B using DTMF dial *2 (code in features.conf for attended transfer).
3) A hears MOH. B dial number C
4) C ringing. A hears MOH.
5) B hangup. A still hears MOH. C ringing.
6) A hangup. C still ringing until "atxfernoanswertimeout" expires.
For v1.4 C will ring forever until C answers the dead line. (Issue #17096)
Problem: When A and B hangup, C is still ringing.
Issue #18395
SIP call limit of B is 1
1. A call B, B answered
2. B *2(atxfer) call C
3. B hangup, C ringing
4. Timeout waiting for C to answer
5. Recall to B fails because B has reached its call limit.
Because B reached its call limit, it cannot do anything until the transfer
it started completes.
Issue #17273
Same scenario as issue 18395 but party B is an FXS port. Party B cannot
do anything until the transfer it started completes. If B goes back off
hook before C answers, B hears ringback instead of the expected dialtone.
**********
Note for the issue #17273 and #18395 fix:
DTMF attended transfer works within the channel bridge. Unfortunately,
when either party A or B in the channel bridge hangs up, that channel is
not completely hung up until the transfer completes. This is a real
problem depending upon the channel technology involved.
For chan_dahdi, the channel is crippled until the hangup is complete.
Either the channel is not useable (analog) or the protocol disconnect
messages are held up (PRI/BRI/SS7) and the media is not released.
For chan_sip, a call limit of one is going to block that endpoint from any
further calls until the hangup is complete.
For party A this is a minor problem. The party A channel will only be in
this condition while party B is dialing and when party B and C are
conferring. The conversation between party B and C is expected to be a
short one. Party B is either asking a question of party C or announcing
party A. Also party A does not have much incentive to hangup at this
point.
For party B this can be a major problem during a blonde transfer. (A
blonde transfer is our term for an attended transfer that is converted
into a blind transfer. :)) Party B could be the operator. When party B
hangs up, he assumes that he is out of the original call entirely. The
party B channel will be in this condition while party C is ringing, while
attempting to recall party B, and while waiting between call attempts.
WARNING:
The ATXFER_NULL_TECH conditional is a hack to fix the problem. It will
replace the party B channel technology with a NULL channel driver to
complete hanging up the party B channel technology. The consequences of
this code is that the 'h' extension will not be able to access any channel
technology specific information like SIP statistics for the call.
ATXFER_NULL_TECH is not defined by default.
**********
(closes issue #17999)
Reported by: iskatel
Tested by: rmudgett
JIRA SWP-2246
(closes issue #17096)
Reported by: gelo
Tested by: rmudgett
JIRA SWP-1192
(closes issue #18395)
Reported by: shihchuan
Tested by: rmudgett
(closes issue #17273)
Reported by: grecco
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1047/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302178 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r301595 | mnicholson | 2011-01-12 12:51:37 -0600 (Wed, 12 Jan 2011) | 22 lines
Merged revisions 301594 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r301594 | mnicholson | 2011-01-12 12:50:31 -0600 (Wed, 12 Jan 2011) | 15 lines
Removed a usleep(1) that shouldn't be necessary in session_do, and removed the
ms_t member from the mansession_session structure.
Merged revisions 301591 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r301591 | mnicholson | 2011-01-12 12:39:03 -0600 (Wed, 12 Jan 2011) | 5 lines
Don't store the thread id for the manager session in the structure we pass to
the thread for the manager session.
ABE-2543
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r301504 | jpeeler | 2011-01-12 12:12:08 -0600 (Wed, 12 Jan 2011) | 26 lines
Merged revisions 301503 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r301503 | jpeeler | 2011-01-12 12:11:49 -0600 (Wed, 12 Jan 2011) | 19 lines
Merged revisions 301502 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r301502 | jpeeler | 2011-01-12 12:10:42 -0600 (Wed, 12 Jan 2011) | 12 lines
Fix CPU spike when pressing DTMF after agent login.
The problem here is that DTMF was being continuously deferred and requeued
since ast_safe_sleep is called in a loop. There are serveral other places in the
code that sleeps and then loops in a similar fashion. Because of this fact I
opted to not defer DTMF any more, which will not affect the original fix:
https://reviewboard.asterisk.org/r/674
(closes issue #18130)
Reported by: rgj
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297825 | jpeeler | 2010-12-07 16:59:30 -0600 (Tue, 07 Dec 2010) | 26 lines
Merged revisions 297824 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297824 | jpeeler | 2010-12-07 16:58:54 -0600 (Tue, 07 Dec 2010) | 19 lines
Merged revisions 297823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297823 | jpeeler | 2010-12-07 16:57:48 -0600 (Tue, 07 Dec 2010) | 12 lines
Revert code that changed SSRC for DTMF.
Some previous behavior was attempted to be restored, but mistakingly I did
not realize that the previous behavior was incorrect. This fixes DTMF not
being detected since DTMF shouldn't cause the SSRC to change.
(related to issue #17404)
(closes issue #18189)
(closes issue #18352)
Reported by: marcbou
Tested by: cmbaker82
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297826 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297312 | twilson | 2010-12-02 12:13:49 -0600 (Thu, 02 Dec 2010) | 28 lines
Merged revisions 297311 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297311 | twilson | 2010-12-02 12:07:39 -0600 (Thu, 02 Dec 2010) | 21 lines
Merged revisions 297310 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297310 | twilson | 2010-12-02 12:00:27 -0600 (Thu, 02 Dec 2010) | 12 lines
Initialize offset for adaptive jitter buffer
When the adaptive jitter buffer is enabled in sip.conf, the first frame placed
in the jitter buffer fails with something like:
jb_warning_output: Resyncing the jb. last_delay 0, this delay -215886466,
threshold 1000, new offset 215886466
This happens because the offset is not initialized before calling jb_put(). This
patch modifies jb_put_first_adaptive() to set the offset to the frame's
timestamp.
Review: https://reviewboard.asterisk.org/r/1041/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by splitting up devices from hints into an own ao2_container the callback to
get these devices for statechange handling is faster.
with this changes the length of a device used in a hint isnt longer restricted
to 80 characters.
Tests showed that calling handle_statechange is 40 times faster if no hints
are used and 25 times faster if there are any hints.
(closes issue #17928)
Reported by: mdu113
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/1003/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296534 | tilghman | 2010-11-29 01:28:44 -0600 (Mon, 29 Nov 2010) | 20 lines
Merged revisions 296533 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296230 | russell | 2010-11-24 17:29:44 -0600 (Wed, 24 Nov 2010) | 20 lines
Merged revisions 296221 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296221 | russell | 2010-11-24 17:28:19 -0600 (Wed, 24 Nov 2010) | 13 lines
Merged revisions 296213 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296213 | russell | 2010-11-24 17:26:43 -0600 (Wed, 24 Nov 2010) | 6 lines
Make Asterisk less crashy.
Since we might not put a new translation path on the channel, go ahead and
set it to NULL right after destroying the old one to ensure we don't try
to free an invalid translation path later on.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296084 | russell | 2010-11-24 14:23:46 -0600 (Wed, 24 Nov 2010) | 26 lines
Merged revisions 296083 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296083 | russell | 2010-11-24 14:23:11 -0600 (Wed, 24 Nov 2010) | 19 lines
Merged revisions 296082 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296082 | russell | 2010-11-24 14:22:32 -0600 (Wed, 24 Nov 2010) | 12 lines
Fix false reporting of an error by set_format().
In the case that the native format was able to be changed to match the
new requested format, the code proceeded to attempt to build a translation
path, anyway. The result would be NULL, since no translation path is
necessary and resulted in this function thinking an error has occurred.
This case is now specifically caught and no attempt to build a translation
path is attempted.
Thanks to our automated tests and bamboo.asterisk.org for catching this problem
and making a whole lot of noise when things started failing. :-)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296002 | russell | 2010-11-24 11:13:08 -0600 (Wed, 24 Nov 2010) | 52 lines
Merged revisions 296001 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296001 | russell | 2010-11-24 11:03:16 -0600 (Wed, 24 Nov 2010) | 45 lines
Merged revisions 296000 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296000 | russell | 2010-11-24 10:48:39 -0600 (Wed, 24 Nov 2010) | 38 lines
Handle failures building translation paths more effectively.
The problem scenario occurred on a heavily loaded system that was using the
codec_dahdi module and exceeded the hardware transcoding capacity. The failure
mode at that point was not good. The report came in to us as an Asterisk
lock-up. The "core show locks" shows a ton of threads locked up (but no
obvious deadlock). Upon deeper investigation, when the system is in this
state, the CPU was maxed out. The CPU was being consumed by the Asterisk
logger spewing messages on every audio frame for calls set up after transcoder
capacity was reached.
The purpose of this patch is to make Asterisk handle failures to create a
translation path in a more graceful manner. If we can't translate, then the
call just needs to be dropped, as it's not going to work. These are the
changes:
1) In set_format() of channel.c (which is called by set_read_format() and
set_write_format()), it was ignoring if ast_translator_build_path() failed and
returned NULL. It now pays attention to that case and returns a result
reflecting failure. With this change in place, the bridging code will
immediately detect a failure and end the bridge instead of proceeding to try to
bridge frames that can't be translated and making channel drivers freak out by
sending them frames in a format they weren't expecting.
2) In ast_indicate_data() of channel.c, failure of ast_playtones_start() was
ignored. It is now reflected in the return value of the function. This didn't
turn out to have any affect on the bug, but seemed like a good change to leave
in.
3) In app_dial(), when only sending a call to a single endpoint, it will
attempt to do some bridging of its own of early audio. It uses
make_compatible() when it's going to do this. However, it ignored failure from
make compatible. So, even with the fix from #1, if there was early audio going
through app_dial, there would still be a period of invalid frames passing
through. After detecting failure here, Dial() exits.
ABE-2658
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295866 | rmudgett | 2010-11-22 13:36:10 -0600 (Mon, 22 Nov 2010) | 60 lines
Merged revisions 295843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r295843 | rmudgett | 2010-11-22 13:28:23 -0600 (Mon, 22 Nov 2010) | 53 lines
Merged revisions 295790 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r295790 | rmudgett | 2010-11-22 12:46:26 -0600 (Mon, 22 Nov 2010) | 46 lines
The channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295711 | russell | 2010-11-19 18:50:00 -0600 (Fri, 19 Nov 2010) | 36 lines
Merged revisions 295710 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r295710 | russell | 2010-11-19 18:45:51 -0600 (Fri, 19 Nov 2010) | 29 lines
Fix cache of device state changes for multiple servers.
This patch addresses a regression where device states across multiple servers
were not being processing completely correctly. The code works to determine
the overall state by looking at the last known state of a device on each
server. However, there was a regression due to some invasive rewrites of how
the cache works that led to the cache only storing the last device state change
for a device, regardless of which server it was on.
The code is set up to cache device state change events by ensuring that each
event in the cache has a unique device name + entity ID (server ID). The code
that was responsible for comparing raw information elements (which EID is)
always returned a match due to a memcmp() with a length of 0.
There isn't much code to fix the actual bug. This patch also introduces a new
CLI command that was very useful for debugging this problem. The command
allows you to dump the contents of the event cache.
(closes issue #18284)
Reported by: klaus3000
Patches:
issue18284.rev1.txt uploaded by russell (license 2)
Tested by: russell, klaus3000
(closes issue #18280)
Reported by: klaus3000
Review: https://reviewboard.asterisk.org/r/1012/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294349 | rmudgett | 2010-11-09 10:55:32 -0600 (Tue, 09 Nov 2010) | 17 lines
Analog lines do not transfer CONNECTED LINE or execute the interception macros.
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294278 | jpeeler | 2010-11-08 15:59:45 -0600 (Mon, 08 Nov 2010) | 23 lines
Merged revisions 294277 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r294277 | jpeeler | 2010-11-08 15:58:13 -0600 (Mon, 08 Nov 2010) | 16 lines
Fix playback failure when using IAX with the timerfd module.
To fix this issue the alert pipe will now be used when the timerfd module is
in use. There appeared to be a race that was not solved by adding locking in the
timerfd module, but needed to be there anyway. The race was between the timer
being put in non-continuous mode in ast_read on the channel thread and the IAX
frame scheduler queuing a frame which would enable continuous mode before the
non-continuous mode event was read. This race for now is simply avoided.
(closes issue #18110)
Reported by: tpanton
Tested by: tpanton
I put tested by tpanton because it was tested on his hardware. Thanks for the
remote access to debug this issue!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292704 | rmudgett | 2010-10-22 10:47:08 -0500 (Fri, 22 Oct 2010) | 19 lines
Connected line is not updated when chan_dahdi/sig_pri or chan_misdn transfers a call.
When a call is transfered by ECT or implicitly by disconnect in sig_pri or
implicitly by disconnect in chan_misdn, the connected line information is
not exchanged. The connected line interception macros also need to be
executed if defined.
The CALLER interception macro is executed for the held call.
The CALLEE interception macro is executed for the active/ringing call.
JIRA ABE-2589
JIRA SWP-2296
Patches:
abe_2589_c3bier.patch uploaded by rmudgett (license 664)
abe_2589_v1.8_v2.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/958/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292595 | dvossel | 2010-10-21 11:14:33 -0500 (Thu, 21 Oct 2010) | 14 lines
Fixes recursive lock problem in manager.c
It is possible for a AMI session to freeze because of invalid
use of recursive locks during the EVENT processing. This
patch removes the unnecessary locks.
(closes issue #18167)
Reported by: sustav
Patches:
manager_locking_v1.diff uploaded by dvossel (license 671)
Tested by: sustav
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292188 | russell | 2010-10-18 14:50:04 -0500 (Mon, 18 Oct 2010) | 9 lines
Resolve some compiler errors in ast_sockaddr_is_any().
These errors came up once this function was used from within netsock2.c.
The errors were like the following:
netsock2.c:393: error: dereferencing pointer ‘({anonymous})’ does break strict-aliasing rules
The usage of a union here avoids this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291758 | pabelanger | 2010-10-14 11:15:12 -0400 (Thu, 14 Oct 2010) | 11 lines
Add the ability for ast_find_ourip to return IPv4, IPv6 or both.
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291581 | twilson | 2010-10-13 16:01:56 -0700 (Wed, 13 Oct 2010) | 35 lines
Merged revisions 291580 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r291580 | twilson | 2010-10-13 15:58:43 -0700 (Wed, 13 Oct 2010) | 28 lines
Merged revisions 291577 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r291577 | twilson | 2010-10-13 15:45:15 -0700 (Wed, 13 Oct 2010) | 21 lines
Don't ignore frames that have been queued when softhangup'd
When an outgoing call is answered and hung up by the far end *very* quickly, we
may not read any frames and therefor end up with a call that displays the wrong
disposition/DIALSTATUS. The reason is because ast_queue_hangup() immediately
sets the _softhangup flag on the channel and then queues the HANGUP control
frame, but __ast_read refuses to read any frames if ast_check_hangup() indicates
that a hangup request has been made (which it will if _softhangup is set). So,
we end up losing control frames.
This change makes __ast_read continue to read frames even if a soft hangup has
been requested. It queues a hangup frame to make sure that __ast_read() will
still eventually return NULL.
Much thanks to David Vossel for all of the reviews, discussion, and help!
(closes issue #16946)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/740/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291227 | dvossel | 2010-10-12 10:58:56 -0500 (Tue, 12 Oct 2010) | 16 lines
Fixes manager.c crash.
This issue was caused by improper use of the mansession lock and
manession_session lock. These two structures are confusing to begin
with so I'm not surprised this occurred. I fixed this by consistently
making sure we use each of these locks only to protect the data
in the corresponding structure. We had mismatched usage of these
locks which resulted in no mutual exclusivity occurring at all.
(closes issue #17994)
Reported by: vrban
Patches:
mansession_locking_fix.diff uploaded by dvossel (license 671)
Tested by: vrban
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291075 | rmudgett | 2010-10-11 11:42:54 -0500 (Mon, 11 Oct 2010) | 22 lines
Merged revisions 291073 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r291073 | rmudgett | 2010-10-11 11:39:17 -0500 (Mon, 11 Oct 2010) | 15 lines
Fixed infinite loop in verbose/debug message output.
Setting the module/filename specific message level and then changing it
resulted in the linked list being looped on itself. Traversing this
linked list is an infinite loop if what you are looking for is not in the
list.
Also plugged some CLI parsing holes in the associated CLI command:
* Removing a nonexistent module from the list actually added it with a
level of zero.
* Setting the non-module specific level to zero is now equivalent to
setting it to "off" as documented.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290864 | jpeeler | 2010-10-07 21:56:24 -0500 (Thu, 07 Oct 2010) | 23 lines
Merged revisions 290863 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r290863 | jpeeler | 2010-10-07 21:45:44 -0500 (Thu, 07 Oct 2010) | 16 lines
Merged revisions 290862 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r290862 | jpeeler | 2010-10-07 21:35:29 -0500 (Thu, 07 Oct 2010) | 9 lines
Ensure editline cleanup occurs when Ctrl-C is pressed at control console.
A recent change was made to avoid a race condition on shutdown which only called
the end functions from the console thread. However, when pressing Ctrl-C the
quit handler is called from the signal handler thread.
(closes issue #17698)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290255 | tilghman | 2010-10-04 18:23:11 -0500 (Mon, 04 Oct 2010) | 18 lines
Merged revisions 290254 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r290254 | tilghman | 2010-10-04 18:14:59 -0500 (Mon, 04 Oct 2010) | 11 lines
Change new pattern matcher to regard dashes the same as the old pattern matcher -- as visual candy to be ignored.
Also change the AEL parser to not generate dashes within extensions, as those
dashes would be ignored. Update the AEL tests to match this behavior.
(closes issue #17366)
Reported by: murf
Patches:
20100727__issue17366.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289340 | qwell | 2010-09-29 16:12:43 -0500 (Wed, 29 Sep 2010) | 22 lines
Merged revisions 289339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289339 | qwell | 2010-09-29 16:03:47 -0500 (Wed, 29 Sep 2010) | 15 lines
Merged revisions 289338 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289338 | qwell | 2010-09-29 15:56:26 -0500 (Wed, 29 Sep 2010) | 8 lines
Allow a manager originate to succeed on forwarded devices.
The timeout to wait for an answer was being set to 0 when a device forwarded to another
extension. We don't always need the timeout set like this, so make it an optional
parameter, and don't use it in this case.
ABE-2544
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289099 | bbryant | 2010-09-28 14:18:02 -0400 (Tue, 28 Sep 2010) | 28 lines
Merged revisions 289095 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289095 | bbryant | 2010-09-28 14:14:19 -0400 (Tue, 28 Sep 2010) | 21 lines
Merged revisions 289094 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289094 | bbryant | 2010-09-28 14:10:19 -0400 (Tue, 28 Sep 2010) | 14 lines
Fixes an issue with the Newchannel AMI event during the Masquerading process.
Fixes an issue with the Newchannel AMI event during the Masquerading process,
where no Newchannel AMI event was generated for the psuedo channel used during
the masquerading process.
(closes issue #17987)
Reported by: RadicAlish
Patches:
newchannel.patch.txt uploaded by RadicAlish (license 1122)
Tested by: RadicAlish
Review: https://reviewboard.asterisk.org/r/937/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r288341 | russell | 2010-09-22 11:45:18 -0500 (Wed, 22 Sep 2010) | 25 lines
Merged revisions 288340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288340 | russell | 2010-09-22 11:44:13 -0500 (Wed, 22 Sep 2010) | 18 lines
Merged revisions 288339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288339 | russell | 2010-09-22 11:39:16 -0500 (Wed, 22 Sep 2010) | 11 lines
Fix a 100% CPU consumption problem when setting console=yes in asterisk.conf.
The handling of -c and console=yes should be the same, but they were not.
When you specify -c, it sets both a flag for console module and for asterisk
not to fork() off into the background. The handling of console=yes only set
console mode, so you would end up with a background process() trying to run
the Asterisk console and freaking out since it didn't have anything to read
input from.
Thanks to beagles for reporting and helping debug the problem!
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r288079 | rmudgett | 2010-09-21 15:29:51 -0500 (Tue, 21 Sep 2010) | 2 lines
Protect channel access in CONNECTED_LINE and REDIRECTING interception macro launch code.
........
r288080 | rmudgett | 2010-09-21 15:29:59 -0500 (Tue, 21 Sep 2010) | 8 lines
Simplify locking code for REDIRECTING interception macro when forwarding a call.
Simplified the locking code by using a local copy of the redirecting party
information in app_dial.c:do_forward() and app_queue.c:wait_for_answer()
for launching the REDIRECTING interception macro when a call is forwarded.
Reduced the lock time of the 'o->chan' and 'in' channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r287685 | alecdavis | 2010-09-21 11:16:45 +1200 (Tue, 21 Sep 2010) | 18 lines
ast_channel_masquerade: Avoid recursive masquerades.
Check all 4 combinations of (original/clonechan) * (masq/masqr).
Initially original->masq and clonechan->masqr were only checked.
It's possible with multiple masq's planned - and not yet executed, that
the 'original' chan could already have another masq'd into it - thus original->masqr
would be set, that masqr would lost.
Likewise for the clonechan->masq.
(closes issue #16057;#17363)
Reported by: amorsen;davidw,alecdavis
Patches:
based on bug16057.diff4.txt uploaded by alecdavis (license 585)
Tested by: ramonpeek, davidw, alecdavis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287661 | alecdavis | 2010-09-21 10:21:50 +1200 (Tue, 21 Sep 2010) | 14 lines
ast_do_masquerade. Keep channels ao2_container locked while unlink and linking channels.
Previously, Masquerade would unlock 'original' and 'clonechan' and allow another masq thread to run.
End result would be corrupted memory, and the frequent report 'Bad Magic Number'.
(closes issue #17801,#17710)
Reported by: notthematrix
Patches:
Based on bug17801.diff1.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/928
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287647 | dvossel | 2010-09-20 17:09:16 -0500 (Mon, 20 Sep 2010) | 21 lines
Addition of the FrameHook API (AKA AwesomeHooks)
So far all our tools for viewing and manipulating media streams
within Asterisk have been entirely focused on audio. That made
sense then, but is not scalable now. The FrameHook API lets us
tap into and manipulate _ANY_ type of media or signaling passed
on a channel present today or in the future. This tool is a step
in the direction of expanding Asterisk's boundaries and will help
generate some rather interesting applications in the future.
In addition to the FrameHook API, a simple dialplan function
exercising the api has been included as well. This function
is called FRAME_TRACE(). FRAME_TRACE() allows for the internal
ast_frames read and written to a channel to be output. Filters
can be placed on this function to debug only certain types of frames.
This function could be thought of as an internal way of doing
ast_frame packet captures.
Review: https://reviewboard.asterisk.org/r/925/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286931 | jpeeler | 2010-09-15 14:22:15 -0500 (Wed, 15 Sep 2010) | 16 lines
Add parking extension for non-default parking lots.
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r286682 | mnicholson | 2010-09-14 13:04:21 -0500 (Tue, 14 Sep 2010) | 21 lines
Merged revisions 286681 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286681 | mnicholson | 2010-09-14 13:02:24 -0500 (Tue, 14 Sep 2010) | 14 lines
Merged revisions 286679 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286679 | mnicholson | 2010-09-14 13:00:01 -0500 (Tue, 14 Sep 2010) | 7 lines
Only drop duplicate answer frames if the channel is bridged.
Back in r3710 ast_read() was modified to drop answer frames on channels that were in the UP state. This modification prevented bridges that were up before the answer from being broken and reestablished by an ANSWER control frame. That change also prevents pickup of channels called from the ast_dial framework from working properly. The ast_dial framework expects to see an ANSWER frame after dialing and the pickup code queues one but ast_read() drops it. This new change only drops ANSWER frames when the channel is bridged, allowing the answer queued by the pickup code to properly pass through ast_read() on to the ast_dial framework.
ABE-2473
(related to issue #2342)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286112 | russell | 2010-09-10 15:31:58 -0500 (Fri, 10 Sep 2010) | 9 lines
Rate limit calls to fsync() to 1 per second after astdb updates.
Astdb was determined to be one of the most significant bottlenecks in SIP
registration processing. This patch improved the speed of an astdb load
test by 50000% (yes, Fifty-Thousand Percent). On this particular load test
setup, this doubled the number of SIP registrations the server could handle.
Review: https://reviewboard.asterisk.org/r/825/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284065 | russell | 2010-08-28 16:29:45 -0500 (Sat, 28 Aug 2010) | 13 lines
Be more flexible with whitespace on AMI action headers.
Previously, this code required exactly one space to be after the ':' in headers
for an AMI action. This now makes whitespace optional, and allows whitespace that
is there to vary in amount.
(closes issue #17862)
Reported by: cmoye
Patches:
manager.c.patch_trunk uploaded by cmoye (license 858)
manager.c.patch_1.8 uploaded by cmoye (license 858)
Tested by: cmoye
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r283230 | russell | 2010-08-23 08:23:12 -0500 (Mon, 23 Aug 2010) | 7 lines
Make the AST_CEL_AMA enum match up with the AST_CDR_ ama flag values.
Really, having 2 enums for this is silly and error prone, demonstrated by
the crash that I hit because there was an assumption in the code that the
values in each matched up. However, this is a quick fix to get them to
match up so it will work.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282468 | twilson | 2010-08-16 12:53:44 -0500 (Mon, 16 Aug 2010) | 30 lines
Merged revisions 282467 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282467 | twilson | 2010-08-16 12:32:01 -0500 (Mon, 16 Aug 2010) | 23 lines
Merged revisions 282430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282430 | twilson | 2010-08-16 12:06:37 -0500 (Mon, 16 Aug 2010) | 16 lines
Send a SRCCHANGE indication when we masquerade
Masquerading a channel means that the src of the audio is potentially
changing, so send a SRCCHANGE so that RTP-based media streams can get
a new SSRC generated to reflect the change. Original patch by addix
(along with lots of testing--thanks!).
(closes issue #17007)
Reported by: addix
Patches:
1001-reset-SSRC-original-channel.diff uploaded by addix (license 1006)
srcchange.diff uploaded by twilson (license 396)
Tested by: addix, twilson
Review: https://reviewboard.asterisk.org/r/862/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282098 | rmudgett | 2010-08-12 17:06:06 -0500 (Thu, 12 Aug 2010) | 7 lines
Separate call completion config parameter allocation and default initialization.
If you ever have a need to reset the call completion config parameters
to defaults, now you can.
And no Virginia, C++ idioms do not always work in C.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282099 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282047 | dvossel | 2010-08-12 15:15:41 -0500 (Thu, 12 Aug 2010) | 35 lines
improved translation paths for wideband codecs
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r281982 | russell | 2010-08-12 11:33:30 -0500 (Thu, 12 Aug 2010) | 5 lines
Remove debugging output from verbose messages.
Pointer values to internal objects is not terribly useful to users in the
verbose messages about adding extensions and contexts.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281913 | jpeeler | 2010-08-11 22:03:37 -0500 (Wed, 11 Aug 2010) | 34 lines
Merged revisions 281912 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r281912 | jpeeler | 2010-08-11 22:01:38 -0500 (Wed, 11 Aug 2010) | 27 lines
Merged revisions 281911 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r281911 | jpeeler | 2010-08-11 22:00:14 -0500 (Wed, 11 Aug 2010) | 20 lines
Ensure SSRC is changed when media source is changed to resolve audio delay.
This change causes the SSRC to change right before the channels are bridged,
which is what used to happen. It seems that fixes were made to attempt limiting
SSRC changes, targeted mainly at sending DTMF. DTMF is not affecting the SSRC
with this change.
There are two other control frames sent in ast_channel_bridge that probably
should also be changed to AST_CONTROL_SRCCHANGE as well, but I'm going to leave
this change up to the discretion of resolving issue #17007.
For reference - old review implementing new control frame SRCCHANGE:
https://reviewboard.asterisk.org/r/540
(closes issue #17404)
Reported by: sdolloff
Patches:
bug17404.patch uploaded by jpeeler (license 325)
Tested by: sdolloff
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281575 | russell | 2010-08-10 13:05:07 -0500 (Tue, 10 Aug 2010) | 16 lines
Merged revisions 281574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r281574 | russell | 2010-08-10 13:04:32 -0500 (Tue, 10 Aug 2010) | 9 lines
Don't move the time threshold for running scheduled events on every iteration.
Instead, only calculate the time threshold each time ast_sched_runq() is called.
(closes issue #17742)
Reported by: schmidts
Patches:
sched.c.patch uploaded by schmidts (license 1077)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281052 | russell | 2010-08-05 08:16:11 -0500 (Thu, 05 Aug 2010) | 16 lines
Merged revisions 281051 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r281051 | russell | 2010-08-05 08:11:32 -0500 (Thu, 05 Aug 2010) | 9 lines
Cleanup default option value handling for cdr.conf [general].
The default values would differ depending on whether or not cdr.conf exists.
That is no longer the case.
Apply a default value to the unanswered option.
Define all default values as named constants.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r280307 | mnicholson | 2010-07-29 08:56:35 -0500 (Thu, 29 Jul 2010) | 11 lines
Merged revisions 280306 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r280306 | mnicholson | 2010-07-29 08:45:11 -0500 (Thu, 29 Jul 2010) | 2 lines
Implement support for ast_channel_queryoption on local channels. Currently only AST_OPTION_T38_STATE is supported.
ABE-2229
Review: https://reviewboard.asterisk.org/r/813/
........
Additionally, pass AST_CONTROL_T38_PARAMETERS control frames through generic bridges. This change appears to have been unintentionally left out of rev 203699.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279949 | dvossel | 2010-07-27 15:57:00 -0500 (Tue, 27 Jul 2010) | 31 lines
Merged revisions 279946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279946 | dvossel | 2010-07-27 15:54:32 -0500 (Tue, 27 Jul 2010) | 24 lines
Merged revisions 279945 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279945 | dvossel | 2010-07-27 15:33:40 -0500 (Tue, 27 Jul 2010) | 19 lines
remove empty audiohook write list on channel
If a channel has an audiohook write list created on it, that
list stays on the channel until the channel is destroyed. There
is no reason to keep that list on the channel if it becomes empty.
If it is empty that just means we are doing needless translating
for every ast_read and ast_write. This patch removes the audiohook
list from the channel once it is detected to be empty on either a
read or write. If a audiohook is added back to the channel after
this list is destroyed, the list just gets recreated as if it never
existed to begin with.
(closes issue #17630)
Reported by: manvirr
Review: https://reviewboard.asterisk.org/r/799/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In particular, Solaris and perhaps others do not support the above mentioned
GNU extension. In this case the paths are simply expanded without the braces
and the calls to glob are made separately.
Note: I could not explain memory allocation failures that were being reported
from within libxml itself when making calls to glob without using GLOB_NOCHECK.
This is the only reason why that flag is being used.
(closes issue #15402)
Reported by: snuffy
Patches:
bug_xmlpatt-v3.diff uploaded by snuffy (license 35),
modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r278618 | mmichelson | 2010-07-22 09:55:04 -0500 (Thu, 22 Jul 2010) | 13 lines
Allow PLC to function properly when channels use SLIN for audio.
If a channel involved in a bridge was using SLIN audio, then translation
paths were not guaranteed to be set up properly since in all likelihood
the number of translation steps was only 1.
This patch enforces the transcode_via_slin behavior if transcode_via_slin
or generic_plc is enabled and one of the formats to make compatible is
SLIN.
AST-352
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for this option did not match the code. Fix that along with
some minor cleanups to the code along the way. Document a slight change in
behavior (to something that was previously undocumented) in UPGRADE.txt.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277906 | jeang | 2010-07-19 15:16:36 -0500 (Mon, 19 Jul 2010) | 7 lines
Avoid trying to pickup a parked extension before the park operation is completed.
A crash could occur if the extension is picked up while the parking extension is
being announced. Testing pu->notquiteyet while searching for a parked extension
resolves this crash.
(ABE-2418)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277625 | tringenbach | 2010-07-16 17:43:39 -0500 (Fri, 16 Jul 2010) | 9 lines
Save and restore AST_FLAG_BRIDGE_HANGUP_DONT on attended transfer.
ast_bridge_call() clears AST_FLAG_BRIDGE_HANGUP_DONT. But during an attended
transfer, ast_bridge_call() is called for a second bridge on the same channel,
and it clears that flag, which still needs to get set for when the original
ast_bridge_call() gets control back and checks it.
Review: https://reviewboard.asterisk.org/r/741
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277247 | mnicholson | 2010-07-16 12:29:57 -0500 (Fri, 16 Jul 2010) | 4 lines
For pass through DTMF tones, measure the actual duration between the begin and end packets on the wire. If it is detected to be less than AST_MIN_DTMF_DURATION, trigger dtmf emulation.
AST-362
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275994 | russell | 2010-07-13 11:51:18 -0500 (Tue, 13 Jul 2010) | 14 lines
Access peer->cdr directly instead of through a saved off reference.
At this point in the code, it is possible that peer_cdr may be invalid.
Specifically, in the blind transfer code, CDRs are swapped between channels.
So, peer_cdr is no longer == peer->cdr.
The scenario that exposed a crash in this code was a blind transfer that hit
the system call limit, causing the transferee channel to get destroyed after
the transfer attempt failed. Even if it succeeds and this code doesn't crash,
this code was still trying to reset a CDR on a channel that was now owned by
a different thread, which is a BadThing(tm).
(ABE-2417)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275665 | jpeeler | 2010-07-12 11:58:39 -0500 (Mon, 12 Jul 2010) | 11 lines
Change ast_write to not stop generator when called from ast_prod.
For SIP channels configured with the progressinband option on, the ringback was
being immediately stopped. This problem was due to ast_prod being moved for a
deadlock fix in 259858. Prodding the channel after setting up the generator
triggered the check in ast_write to stop the generator. The fix here should
write the frame the same as was done before the call to ast_prod was moved.
(closes issue #17372)
Reported by: tech_admin
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Andrew Latham
Tilghman Lesher
Sean Bright
Richard Mudgett
Jeff Peeler
Mark Michelson
Matthew Nicholson
Russell Bryant
Shaun Ruffell
Paul Belanger
David Vossel
Leif Madsen
Tzafrir Cohen
Terry Wilson
Stefan Schmidt
Olle Johansson
Jason Parker
Brett Bryant
Alec L Davis
Jean Galarneau
Tim Ringenbach
Kevin P. Fleming