https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r86836 | russell | 2007-10-22 16:36:12 -0500 (Mon, 22 Oct 2007) | 9 lines
If lock tracking is not enabled, then we can not attempt to log any mutex
failures. If so, we could end up in infinite recursion. The only lock that
is affected by this is a mutex in astmm.c used when MALLOC_DEBUG is enabled.
(closes issue #11044)
Reported by: ys
Patches:
lock.h.diff uploaded by ys (license 281)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85532 | russell | 2007-10-13 00:24:33 -0500 (Sat, 13 Oct 2007) | 8 lines
Properly handle the case where read() may return the text for more than one
CLI command at once for a remote console.
(closes issue #10888)
Reported by: jamesgolovich
Patches:
asterisk-climultiple.diff.txt uploaded by jamesgolovich (license 176)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r86330 | russell | 2007-10-18 13:03:10 -0500 (Thu, 18 Oct 2007) | 10 lines
The channel needs to stay locked while running timer callbacks, as they access
and modify channel data that may change elsewhere. I went through every timer
callback in the source tree to make sure that none of them did any additional
locking that could introduce deadlocks, and all is well.
(closes issue #10765)
Reported by: Ivan
Patches:
ast_1_4_11_svn_patch_channel_rc.diff uploaded by Ivan (license 229)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85994 | russell | 2007-10-16 17:14:36 -0500 (Tue, 16 Oct 2007) | 16 lines
Some locking errors exposed the fact that the lock debugging code itself was
not thread safe. How ironic! Anyway, these changes ensure that the code that
is accessing the lock debugging data is thread-safe.
Many thanks to Ivan for finding and fixing the core issue here, and also
thanks to those that tested the patch and provided test results.
(closes issue #10571)
(closes issue #10886)
(closes issue #10875)
(might close some others, as well ...)
Patches: (from issue #10571)
ivan_ast_1_4_12_rel_patch_lock.h.diff uploaded by Ivan (license 229)
- a few small changes by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85533 | russell | 2007-10-13 01:48:10 -0400 (Sat, 13 Oct 2007) | 12 lines
Fix an issue with console verbosity when running asterisk -rx to execute a command
and retrieve its output. The issue was that there was no way for the main Asterisk
process to know that the remote console was connecting in the -rx mode. The way that
James has fixed this is to have all remote consoles muted by default. Then, regular
remote consoles automatically execute a CLI command to unmute themselves when they
first start up.
(closes issue #10847)
Reported by: atis
Patches:
asterisk-consolemute.diff.txt uploaded by jamesgolovich (license 176)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85316 | russell | 2007-10-10 10:56:23 -0500 (Wed, 10 Oct 2007) | 6 lines
I introduced a new member to the ast_filestream struct in 1.4.12, but put it
in the middle of the struct, instead of at the end. One of the Debian folks,
paravoid, pointed out that this breaks binary compatability with modules
compiled against older headers. So, I'm moving the new member to the end
of the struct to resolve the situation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
No real Jingle implementation being available, testing was made using
two Asterisk servers relaying SIP calls over their Jingle channels:
SIP Phone 1 --- [chan_sip]Asterisk 1[chan_jingle] --- [chan_jingle]Asterisk 2[chan_sip] --- SIP Phone 2
Thus, it was possible to test the code in both ways, and make the
Jingle channel comply with the latest specifications. No sound available yet.
Main modifications include :
- modified the 'jingle_candidate' structure and the
'jingle_create_candidates' function according to XEP-0176 ;
- modified the 'jingle_action' function in order to properly terminate
a Jingle session, in conformance with XEP-0166 ;
- modified username format used in STUN requests ;
- actually make the bindaddr configuration field useable.
Todo :
- set audio paths up (no native bridging) ;
- make the CLI gtalk functions available to jingle ;
- clean up the storage space used in strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r82929 | russell | 2007-09-18 17:42:27 -0500 (Tue, 18 Sep 2007) | 11 lines
Add a new patch to handle interrupting the fgets() call when using FastAGI.
This version of the patch maintains the original behavior of the code when
not using FastAGI.
(closes issue #10553)
Reported by: juggie
Patches:
res_agi_fgets-4.patch uploaded by juggie (license 24)
res_agi_fgets_1.4svn.patch uploaded by juggie (license 24)
Slight mods by me
Tested by: juggie, festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r82337 | russell | 2007-09-13 13:45:59 -0500 (Thu, 13 Sep 2007) | 4 lines
Only compile in tracking astobj2 statistics if dev-mode is enabled. Also, when
dev mode is enabled, register the CLI command that can be used to run the astobj2
test and print out statistics.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it doesn't free the slinfactory itself. (This isn't related to a bug, i'm just
looking over random code)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_hash_fn and ao2_callback_fn typedefs, in preparation
to more cleanup of the _search_flags
Please do not merge this change to 1.4 yet - there are no
functional changes anyways.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81599 | russell | 2007-09-05 15:53:41 -0500 (Wed, 05 Sep 2007) | 11 lines
Fix an issue that can occur when you do an attended transfer to parking. If
you complete the transfer before the announcement of the parking spot finishes,
then the channel being parked will hear the remainder of the announcement.
These changes make it so that will not happen anymore.
Basically, res_features sets a flag on the channel is playing the announcement
to so that the file streaming core knows that it needs to watch out for a
channel masquerade, and if it occurs, to abort the announcement.
(closes BE-182)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81448 | russell | 2007-09-04 13:37:44 -0500 (Tue, 04 Sep 2007) | 4 lines
Remove the typedefs on ao2_container and ao2_iterator. This is simply because
we don't typedef objects anywhere else in Asterisk, so we might as well make
this follow the same convention.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
functions. As inline functions, the lock debug information will show that
these are always locked in audiohooks.h instead of the file where the lock was
actually acquired.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81264 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Convert some spaces to tabs in func_volume
* Add a note in channel.h making it clear that none of the datastore API calls
lock the channel they are given, so the channel should be locked before
calling the functions that take a channel argument.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nic_bellamy
Patches:
2006-10-03_svn_44249_voicemail_lockmode_v3.patch uploaded by nic_bellamy (license 213)
Add support for configurable file locking methods. The default is "lockfile",
which is the old behavior. There is an additional option, "flock", which is
intended for use in situations where the lockfile method will not work, such as
with SMB/CIFS mounts.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80573 | russell | 2007-08-23 15:16:41 -0500 (Thu, 23 Aug 2007) | 5 lines
When executing a dynamic feature, don't look it up a second time by digit pattern
after we already looked it up by name. This causes broken behavior if there is
more than one feature defined with the same digit pattern.
(closes issue #10539, reported by bungalow, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80426 | russell | 2007-08-22 17:54:03 -0500 (Wed, 22 Aug 2007) | 6 lines
Add some more documentation on iterating ao2 containers. The documentation
implies that is possible to miss an object or see an object twice while
iterating. After looking through the code and talking with mmichelson, I have
documented the exact conditions under which this can happen (which are rare and
harmless in most cases).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80362 | russell | 2007-08-22 15:21:36 -0500 (Wed, 22 Aug 2007) | 34 lines
Merge changes from team/russell/iax_refcount.
This set of changes fixes problems with the handling of iax2_user and iax2_peer
objects. It was very possible for a thread to still hold a reference to one of
these objects while a reload operation tries to delete them. The fix here is to
ensure that all references to these objects are tracked so that they can't go away
while still in use.
To accomplish this, I used the astobj2 reference counted object model. This
code has been in one of Luigi Rizzo's branches for a long time and was primarily
developed by one of his students, Marta Carbone. I wanted to go ahead and bring
this in to 1.4 because there are other problems similar to the ones fixed by these
changes, so we might as well go ahead and use the new astobj if we're going to go
through all of the work necessary to fix the problems.
As a nice side benefit of these changes, peer and user handling got more efficient.
Using astobj2 lets us not hold the container lock for peers or users nearly as long
while iterating. Also, by changing a define at the top of chan_iax2.c, the objects
will be distributed in a hash table, drastically increasing lookup speed in these
containers, which will have a very big impact on systems that have a large number of
users or peers.
The use of the hash table will be made the default in trunk. It is not the default
in 1.4 because it changes the behavior slightly. Previously, since peers and users
were stored in memory in the same order they were specified in the configuration file,
you could influence peer and user matching order based on the order they are specified
in the configuration. The hash table does not guarantee any order in the container,
so this behavior will be going away. It just means that you have to be a little
more careful ensuring that peers and users are matched explicitly and not forcing
chan_iax2 to have to guess which user is the right one based on secret, host, and
access list settings, instead of simply using the username.
If you have any questions, feel free to ask on the asterisk-dev list.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10430)
........
r79904 | qwell | 2007-08-17 14:12:19 -0500 (Fri, 17 Aug 2007) | 11 lines
Don't send a semicolon over the wire in sip notify messages.
Caused by fix for issue 9938.
I basically took the code that existed before 9938 was fixed, and
copied it into a new function - ast_unescape_semicolon
There should be very few places this will be needed (pbx_config
does NOT need this (see issue 9938 for details))
Issue 10430, patch by me, with help/ideas from murf (thanks murf).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in place of a very common construct. I also used it in a number of places
in chan_sip.
if (id > -1)
ast_sched_del(sched, id);
id = ast_sched_add(sched, ...);
changes to:
ast_sched_replace(id, sched, ...);
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The way a device state change propagates is kind of silly, in my opinion. A
device state provider calls a function that indicates that the state of a
device has changed. Then, another thread goes back and calls a callback for
the device state provider to find out what the new state is before it can go
send it off to whoever cares.
I have changed it so that you can include the state that the device has changed
to in the first function call from the device state provider. This removes the
need to have to call the callback, which locks up critical containers to go find
out what the state changed to.
This change set changes the "simple" device state providers to use the new method.
This includes parking, meetme, and SLA.
I have also mostly converted chan_agent in my branch, but still have some more
things to think through before presenting the plan for converting channel drivers
to ensure all of the right events get generated ...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78995 | russell | 2007-08-10 10:20:09 -0500 (Fri, 10 Aug 2007) | 4 lines
The last set of changes that I made to "core show locks" made it not able to
track mutexes unless they were declared using AST_MUTEX_DEFINE_STATIC. Locks
initialized with ast_mutex_init() were not tracked. It should work now.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78103 | mmichelson | 2007-08-03 15:25:22 -0500 (Fri, 03 Aug 2007) | 7 lines
Changed the behavior of sip's realtime_peer function to match the corresponding way of matching for non-realtime peers.
Now matches are made on both the IP address and port number, or if the insecure setting is set to "port" then just match on the
IP address.
In order to accomplish this, I also added a new API call, ast_category_root, which returns the first variable of an ast_category struct
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78184 | russell | 2007-08-06 11:50:54 -0500 (Mon, 06 Aug 2007) | 5 lines
Fix the return value of AST_LIST_REMOVE(). This shouldn't be causing any
problems, though, because the only code that uses the return value only checks
to see if it is NULL.
(closes issue #10390, pointed out by mihai)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was that res_crypto now has a RWLIST named "keys". The macro
for defining this list defines a function used as a constructor for the list
called "init_keys". However, there was another function called init_keys in
this module for a CLI command. The fix is just to prepend the generated
functions with underscores.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78095 | russell | 2007-08-03 14:39:49 -0500 (Fri, 03 Aug 2007) | 28 lines
Add some improvements to lock debugging. These changes take effect
with DEBUG_THREADS enabled and provide the following:
* This will keep track of which locks are held by which thread as well as
which lock a thread is waiting for in a thread-local data structure. A
reference to this structure is available on the stack in the dummy_start()
function, which is the common entry point for all threads. This information
can be easily retrieved using gdb if you switch to the dummy_start() stack
frame of any thread and print the contents of the lock_info variable.
* All of the thread-local structures for keeping track of this lock information
are also stored in a list so that the information can be dumped to the CLI
using the "core show locks" CLI command. This introduces a little bit of a
performance hit as it requires additional underlying locking operations
inside of every lock/unlock on an ast_mutex. However, the benefits of
having this information available at the CLI is huge, especially considering
this is only done in DEBUG_THREADS mode. It means that in most cases where
we debug deadlocks, we no longer have to request access to the machine to
analyze the contents of ast_mutex_t structures. We can now just ask them
to get the output of "core show locks", which gives us all of the information
we needed in most cases.
I also had to make some additional changes to astmm.c to make this work when
both MALLOC_DEBUG and DEBUG_THREADS are enabled. I disabled tracking of one
of the locks in astmm.c because it gets used inside the replacement memory
allocation routines, and the lock tracking code allocates memory. This caused
infinite recursion.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77788 | russell | 2007-07-30 14:13:31 -0500 (Mon, 30 Jul 2007) | 10 lines
(closes issue #10279)
Reported by: seanbright
Patches:
res_agi.carefulwrite.1.4.07252007.patch uploaded by seanbright (license 71)
res_agi.carefulwrite.trunk.07252007.patch uploaded by seanbright (license 71)
Allow the "agi_network: yes" line to be printed out in the AGI debug output.
Also, allow partial writes to be handled when writing out this line just like
it is for all of the others.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Makes the structures handling external AGI commands a bit more thread-safe
- Makes AGI transparently work with both live and hungup channels
- DeadAGI is hence no longer necessary and is deprecated
- CLI bug fixes
- Commands will refuse to run if the channel is dead and the command is nonsensical
for dead channels.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snuffy
Patches:
doxygen-updates.diff uploaded by snuffy (license 35)
Another big batch of doxygen documentation updates
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bbryant
Patches:
20070720__core_debug_by_file.patch uploaded by bbryant (license 36)
(with some modifications by me)
Tested by: russell, bbryant
This set of changes introduces the ability to set the core debug or verbose
levels on a per-file basis. Interestingly enough, in 1.4, you have the ability
to set core debug for a single file, but that functionality was accidentally
lost in the conversion of the CLI commands to the new format.
This patch improves upon what was in 1.4 by letting you set it for more than 1
file, and by also supporting verbose.
*** Janitor Project ***
This patch also introduces a new macro, ast_verb(), which is similar
to ast_debug(). Setting the per file verbose value only works for messages that
use this macro. Converting existing uses of ast_verbose() can be done like:
if (option_debug > 2)
ast_verbose(VERBOSE_PREFIX_3 "Something useful\n");
...
ast_verb(3, "Something useful\n");
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(e.g. chan_sip.c in a subsequent commit).
Obviously exposing the internals of a data structure is far from ideal
(especially in a case like this where the implementation is very
inefficient and will need to be changed at some point).
On the other hand, it was also unclear what additional APIs should
we provide instead, and because exposing the stucture has no impact
on source and binary compatibility, this seemed to me the best option at
this time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in a consistent way. This is meant to replace the custom code
which is repeated all over the place in the various files when
parsing config files, CLI entries and other string information.
Right now the code supports parsing int32, uint32 and sockaddr_in with
optional default values and bound checks. It contains minimal error
checking, but that can be easily extended as the need arises.
Being a new API i am introducing this only in trunk, though I believe
that once the interface has been ironed out it might become a
worthwhile addition to 1.4 as well - basically, the first time
we will need to fix a piece of argument parsing code, we might as
well bring in this change and use the new API instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
use the \retval tag for documenting return values, fixing various warnings
when generating the documentation, and various other things.
(closes issue #10203, snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sockets other than RTP ones.
The main change is a new API function in main/rtp.c (see there
for a description)
int ast_stun_request(int s, struct sockaddr_in *dst,
const char *username, struct sockaddr_in *answer)
which can be used to send an STUN request on a socket, and
optionally wait for a reply and store the STUN_MAPPED_ADDRESS
into the 'answer' argument (obviously, the version that
waits for a reply is blocking, but this is no different
from DNS resolutions).
Internally there are minor modifications to let stun_handle_packet()
be somewhat configurable on how to parse the body of responses.
At the moment i am not committing any change to the clients,
but adding STUN client support is extremely simple, e.g. chan_sip.c
could do something like this:
+ add a variable to store the stun server address;
static struct sockaddr_in stunaddr = { 0, }; /*!< stun server address */
+ add code to parse a config file of the form "stunaddr=my.stun.server.org:3478"
(not shown for brevity);
+ right after binding the main sip socket, talk to the stun server to
determine the externally visible address
if (stunaddr.sin_addr.s_addr != 0)
ast_stun_request(sipsock, &stunaddr, NULL, &externip);
so now 'externip' is set with the externally visible address.
so it is really trivial.
Similarly ast_stun_request could be called when creating the RTP
socket (possibly adding a struct sockaddr_in field in the struct
ast_rtp to store the externalip).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10133)
................
r74374 | qwell | 2007-07-10 13:39:30 -0500 (Tue, 10 Jul 2007) | 13 lines
Merged revisions 74373 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r74373 | qwell | 2007-07-10 13:37:23 -0500 (Tue, 10 Jul 2007) | 5 lines
Use res_ndestroy on systems that have it. Otherwise, use res_nclose.
This prevents a memleak on NetBSD - and possibly others.
Issue 10133, patch by me, reported and tested by scw
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@74375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: julien23
Patches submitted by: julien23
Add the ability to disable recording the input or output streams in res_monitor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@74164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the call is answered by another phone, other phones won't display the call as "missed".
You can also add an option to the dial command so that you can have a "followme"
scenario and not count the calls as "missed" when you cancel the call.
Thanks to Ramon and Frank for feedback on this feature.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@74024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
*must* write the file to the FILE *, and not the raw fd. Otherwise, it breaks
TLS support.
Thanks to rizzo for catching this!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Handle transferring large files from the built-in http server. Previously, the
code attempted to malloc a block as large as the file itself. Now it uses the
sendfile() system call so that the file isn't copied into userspace at all if
it is available. Otherwise, it just uses a read/write of small chunks at a time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also adds a new "reporting" permission for manager, since it can be incredibly spammy.
This permission was discussed on the -dev mailing list some months back.
Issue 8613, patch by johann8384, with some minor changes by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@70961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r69702 | russell | 2007-06-18 11:35:02 -0500 (Mon, 18 Jun 2007) | 6 lines
To prevent 92138749238754 more reports of "I have unixodbc installed, but
still can't build *_odbc.so!", check for ltdl directly, instead of just listing
it as another library to include in the unixodbc check in the configure script.
This also makes ltdl show up as a dependency in menuselect so people know what
to go install. (related to issue #9989, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@69703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the beginning of the file. Also, add a channel variable that indicates
the location in the file where the Playback was stopped.
(closes issue #7655, patch from sharkey)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@68502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67993 | oej | 2007-06-07 11:00:44 +0200 (Thu, 07 Jun 2007) | 6 lines
Issue #9738 - Make sure we can unload res_jabber. Patch by phsultan - thanks!
Due to a bug in the iksemel library, this will not work if you are using GTLS
in the connection. That's being investigated. If you figure out a way to handle
that without us having to patch iksemel, let us know in the bug report. Thanks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@68026 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r67716 | russell | 2007-06-06 11:55:59 -0500 (Wed, 06 Jun 2007) | 13 lines
Merged revisions 67715 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r67715 | russell | 2007-06-06 11:40:51 -0500 (Wed, 06 Jun 2007) | 5 lines
We have some bug reports showing crashes due to a double free of a channel.
Add a sanity check to ast_channel_free() to make sure we don't go on trying
to free a channel that wasn't found in the channel list.
(issue #8850, and others...)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67492 | russell | 2007-06-05 15:53:28 -0500 (Tue, 05 Jun 2007) | 16 lines
This bug has been hanging over my head ever since I wrote this SLA code.
Every time I tried to go debug it by adding some debug output, the behavior
would change. It turns out I wasn't crazy. I had the following piece of code:
if (remove)
AST_LIST_REMOVE_CURRENT(...);
Well, AST_LIST_REMOVE_CURRENT was not wrapped in braces, so my conditional
statement didn't do much good at all. It always ran at least all of the
macro minus the first statement, so I was seeing list entries magically
disappear when they weren't supposed to.
After many hours of debugging, I have come to this extremely irritating fix. :)
(issues #9581, #9497)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67308 | russell | 2007-06-05 10:51:53 -0500 (Tue, 05 Jun 2007) | 5 lines
When shutting down "gracefully", go through and run the unload() callbacks for
all of the modules. "stop now" is considered a non-graceful shutdown and will
not go through this process.
(issue #9804, reported by chrisost, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places that cared about device states were app_queue and the hint code in pbx.c.
The changes include converting it to use the Asterisk event system, as well as
other efficiency improvements.
* app_queue: This module used to register a callback into devicestate.c to
monitor device state changes. Now, it is just a subscriber to Asterisk
events with the type, device state.
* pbx.c hints: Previously, the device state processing thread in devicestate.c
would call ast_hint_state_changed() each time the state of a device changed.
Then, that code would go looking for all the hints that monitor that device,
and call their callbacks. All of this blocked the device state processing
thread. Now, the hint code is a subscriber of Asterisk events with the
type, device state. Furthermore, when this code receives a device state
change event, it queues it up to be processed by another thread so that it
doesn't block one of the event processing threads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places in the code where the same block of code for creating detached threads
was replicated. (patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
class in musiconhold.conf, a caller on hold may press this digit to switch
to listening to that music class.
This involved adding a new callback for generators, which allow generators
to get notified of DTMF from the channel they are running on. Then, a callback
was implemented for the music on hold generators.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r65200 | murf | 2007-05-18 16:06:27 -0600 (Fri, 18 May 2007) | 9 lines
Merged revisions 65172 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r65172 | murf | 2007-05-18 14:56:20 -0600 (Fri, 18 May 2007) | 1 line
This update will fix the situation that occurs as described by 9717, where when several targets are specified for a dial, if any one them reports FAIL, the whole call gets FAIL, even though others were ringing OK. I rearranged the priorities, so that a new disposition, NULL, is at the lowest level, and the disposition get init'd to NULL. Then, next up is FAIL, and next up is BUSY, then NOANSWER, then ANSWERED. All the related set routines will only do so if the disposition value to be set to is greater than what's already there. This gives the intended effect. So, if all the targets are busy, you'd get BUSY for the call disposition. If all get BUSY, but one, and that one rings is not answered, you get NOANSWER. If by some freak of nature, the NULL value doesn't get overridden, then the disp2str routine will report NOANSWER as before.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
allow you to initiate an ENUM query using ENUMQUERY, and then access the
details of all of the results using ENUMRESULT. Previously, if you wanted
to access multiple results, Asterisk would have to do a new DNS lookup every
time. (patch by bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@64480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add missing option to options.h
- Add missing variables to asterisk.h
- Move manager version to manager.h include file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces a new generic event API for use within Asterisk.
I am still working on a way for events to be shared between servers, but this
part is ready and can already be used inside of Asterisk.
This set of changes introduces the first use of the API, as well. I have
restructured the way that MWI (message waiting indication) is handled. It is
now event based instead of polling based. For example, if there are a bunch
of SIP phones subscribed to mailboxes, then chan_sip will not have to
constantly poll the mailboxes for changes. app_voicemail will generate events
when changes occur.
See UPGRADE.txt and CHANGES for some more information on the effects of these
changes from the user perspective. For developer information, see the text in
include/asterisk/event.h.
As always, additional feedback is welcome on the asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61781 | russell | 2007-04-24 14:00:06 -0500 (Tue, 24 Apr 2007) | 6 lines
Improve DTMF handling in ast_read() even more in response to a discussion on
the asterisk-dev mailing list. I changed the enforced minimum length of a
digit from 100ms to 80ms. Furthermore, I made it now enforce a gap of 45ms in
between digits. These values are not configurable in a configuration file
right now, but they can be easily changed near the top of main/channel.c.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61782 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I started this for use with SLA but ended up deciding not to use it. However,
there is no reason not to put this part in, anyway.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r60850 | tilghman | 2007-04-08 22:01:12 -0500 (Sun, 08 Apr 2007) | 10 lines
Merged revisions 60849 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r60849 | tilghman | 2007-04-08 21:49:06 -0500 (Sun, 08 Apr 2007) | 2 lines
Don't check for error when lowering priority (according to the manpage, it should never happen anyway). It might could happen, though, if another thread messed with the priority, so safeguard against that (reported via -dev list).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r59207 | russell | 2007-03-26 12:45:55 -0500 (Mon, 26 Mar 2007) | 7 lines
The AUDIORTPQOS and VIDEORTPQOS variables are not fully functional in some
because they get set in sip_hangup. So, there are common situations where
the variables will not be available in the dialplan at all. So, this patch
provides an alternate method for getting to this information by introducing
AUDIORTPQOS and VIDEORTPQOS dialplan functions.
(issue #9370, patch by Corydon76, with some testing by blitzrage)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r59202 | nadi | 2007-03-26 17:25:53 +0200 (Mo, 26 Mär 2007) | 4 lines
* mISDN >= 1.2 provides a dsp pipeline for i.e. echo cancellation modules, make chan_misdn use it.
* add a check for linux/mISDNdsp.h to configure.ac and update the autogenerated files: 'configure', 'autoconfig.h.in'
(the 'configure' script was not in sync with the latest configure.ac, so the diff is a bit bigger than expected).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add new module, cdr_sqlite3_custom which allows logging custom CDRs into a
SQLite3 database. (issue #7149, alerios)
* Add new module, res_config_sqlite, which adds realtime database configuration
support for SQLite version 2. I decided that this was ok since we didn't have
any realtime support for version 3. If someone ports this to version 3, then
version 2 support can be removed or marked deprecated.
(issue #7790, rbarun_proformatique)
* Mark cdr_sqlite as deprecated in favor of cdr_sqlite3_custom.
Also, note that there were other modules on the bug tracker that did not make
the cut because they provided some duplicated functionality. Those are:
* cdr_sqlite3 (issue #6754, moy)
* cdr_sqlite3 (issue #8694, bsd)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r57364 | russell | 2007-03-01 17:42:53 -0600 (Thu, 01 Mar 2007) | 16 lines
Merge changes from svn/asterisk/team/russell/sla_updates
* Originally, I put in the documentation that only Zap interfaces would be
supported on the trunk side. However, after a discussion with Qwell, we came
up with a way to make IP trunks work as well, using some things already in
Asterisk. So, here it is, this now officially supports IP trunks.
* Update the SLA documentation to reflect how to setup IP trunks.
* Add a section in sla.txt that describes how to set up an SLA system with
voicemail.
* Simplify the way DTMF passthrough is handled in MeetMe.
* Fix a bug that exposed itself when using a Local channel on the trunk side
in SLA. The station's channel needs to be passed to the dial API when
dialing the trunk.
* Change a WARNING message to DEBUG in channel.h. This message is of no use
to users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@57365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
external libraries and URLs to these. Please help me add these
references.
We might want to create a similar macro "\linuxpackage" to list
the needed Linux packages in popular distributions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
T.140/RFC 2793 is a live communication channel, originally
created for IP based text phones for hearing impaired.
Feels very much like the old Unix talk application.
This code is developed and disclaimed by John Martin of Aupix, UK.
Tested for interoperability by myself and Omnitor in Sweden,
the company that wrote most of the specifications.
A big thank you to everyone involved in this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pretty cool things.
First, you can get the device state of anything in the dialplan:
NoOp(SIP/mypeer has state ${DEVSTATE(SIP/mypeer)})
NoOp(The conference room 1234 has state ${DEVSTATE(MeetMe:1234)})
Most importantly, this allows you to create custom device states so you can
control phone lamps directly from the dialplan.
Set(DEVSTATE(Custom:mycustomlamp)=BUSY)
...
exten => mycustomlamp,hint,Custom:mycustomlamp
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r54066 | russell | 2007-02-12 11:58:43 -0600 (Mon, 12 Feb 2007) | 4 lines
- Add the ability to register a callback to monitor state changes in an
asynchronous dial operation.
- Rename the various references to "status" to "state" in the dial API
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53810 | russell | 2007-02-09 18:35:09 -0600 (Fri, 09 Feb 2007) | 24 lines
Merge team/russell/sla_rewrite
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52997 | russell | 2007-01-30 17:23:24 -0600 (Tue, 30 Jan 2007) | 5 lines
When we are checking for a system installed version of libgsm, we need to check
for gsm.h as well. Furthermore, when checking for this header, it may be
located in a gsm/ sub directory, so check for that, as well.
(issue #8773)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52494 | jdixon | 2007-01-28 22:18:36 -0600 (Sun, 28 Jan 2007) | 4 lines
Fixed problem with jitterbuf, whereas it would not complain about, and
would allow itself to be overfilled (per the max_jitterbuf parameter). Now
it rejects any data over and above that size, and complains about it.
........
r52506 | russell | 2007-01-29 10:54:27 -0600 (Mon, 29 Jan 2007) | 5 lines
Clean up a few things in the last commit to the adaptive jitterbuffer code.
- Specifically indicate to the compiler that the "dropem" variable only
needs one but.
- Change formatting to conform to coding guidelines.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_INLINE_API() is a macro that takes a block of code as an argument.
Using preprocessor #directives in the argument is not supported by all
compilers, and it is a bit of an obfuscation anyways, so avoid it.
As a workaround, define a macro that produces either its argument
or nothing, and use that instead of #ifdef/#endif within the
argument to AST_INLINE_API().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
place, rather than repeating the check on every single file.
Changes to the individual files are coming.
The header file name has been suggested by kevin.
Approved by: kpfleming
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50867 | kpfleming | 2007-01-15 09:03:06 -0600 (Mon, 15 Jan 2007) | 2 lines
use the ACX_PTHREAD macro from the Autoconf macro archive for setting up compiler pthreads support... should improve portability to platforms with unusual pthreads requirements
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50466 | file | 2007-01-11 00:19:39 -0500 (Thu, 11 Jan 2007) | 2 lines
Add support to see whether NAT was detected (yay symmetric RTP) and also add a check in chan_sip so that if NAT has been detected and the reinvite behind nat option has been turned off, then just do partial bridge. (issue #8655 reported by mnicholson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
previously set are erroneously still set (Bug 6701). After discussion,
it was determined this should only be changed in trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49102 | kpfleming | 2007-01-01 17:34:35 -0600 (Mon, 01 Jan 2007) | 2 lines
check specifically for VLDTMF and transcoding support in the system's Zaptel installation, and make only the modules that need those features dependent on them (this will allow building the other Zaptel-using parts of Asterisk against older versions of Zaptel or those on other platforms that haven't caught up yet to the Linux version)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48998 | kpfleming | 2006-12-27 15:08:30 -0600 (Wed, 27 Dec 2006) | 3 lines
move extern declaration for this option to a header file where it belongs
provide an initial value for 'languageprefix' option, instead of relying on randomness to provide a useful value
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48964 | file | 2006-12-25 23:31:58 -0500 (Mon, 25 Dec 2006) | 2 lines
Add an API call that initializes an RTP structure. We need this because chan_sip is cheeky and uses a temporary RTP structure for codec purposes, and the API calls that are used rely on the lock. (Pointed out on asterisk-dev by Andy Wang)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
defined in indications.h to ind_tone_zone_sound and ind_tone_zone,
to avoid conflicts with the structs with the same names
defined in tonezone.h
Hope i haven't missed any instance.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
this, implementing locking of this list to make it thread-safe.
- Add a "redirect" option to http.conf that allows redirecting one URI to
another. I was inspired to do this while playing with the Asterisk GUI. I
got tired of typing this URL to get to the GUI:
http://localhost:8088/asterisk/static/config/cfgadvanced.html
So, now I have the following line in http.conf:
redirect=/=/asterisk/static/config/cfgadvanced.html
Now, I can type the following into my browser and go to the GUI:
http://localhost:8088
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I don't know when the bug was introduced, but with the typical usage
c->fin = FRAMECOUNT_INC(c->fin)
the frame counters stay to 0.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
http://bugs.digium.com/view.php?id=8602
(i am not sure if there is still missing cast in
front of the alloca() call - being a macro this is
probably triggered only when actually used).
Add function ast_str_reset() to reinitialize the
string to an empty string instead of playing with
the internal fields.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48521 | kpfleming | 2006-12-16 14:12:41 -0600 (Sat, 16 Dec 2006) | 2 lines
since we really, really have to have autoconfig.h included before all other headers (especially system headers), the Makefile will now force it to happen (this will fix build problems with files like ast_expr2f.c, where we can't control the inclusion order in the file itself)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
renaming them to ast_str ... and putting the
struct ast_threadstorage pointer into the struct ast_str.
This makes the code a lot more readable.
At this point we can use these routines also to
replace ast_build_string().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While doing this, add a bit of documentation, and slightly
extend the functionality as follows:
+ a max_len of -1 means that we take whatever the current size
is, and never try to extend the buffer;
+ add support for alloca()-ted dynamic strings, which is very
useful for all cases where we do an ast_build_string() now.
Next step is to simplify the interface by using shorter names
(e.g. ast_str as a prefix) and removing the _thread variant
of the functions by saving the threadstorage reference into
the struct ast_str. This can be done by overloading the
'type' field.
Finally, I will do my best to remove the convoluted interface
that results from trying to support platforms without va_copy().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48472 | file | 2006-12-14 12:36:12 -0500 (Thu, 14 Dec 2006) | 2 lines
Payload values on the RTP structure can change AFTER a bridge has started. This comes from the packet handling of the SIP response when indication that it was answered has been sent. Therefore we need to protect this data with a lock when we read/write. (issue #8232 reported by tgrman)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48473 65c4cc65-6c06-0410-ace0-fbb531ad65f3
are passed as an argument.
- Update the code in main/http.c to use the new interface
(the diff is large but mostly mechanical, due to the name change of
several variables);
- And since now it is trivial, implement "AMI over TLS", and document
the possible options in manager.conf
- And since the test client (openssl s_client -connect host:port )
does not generate \r\n as a line terminator, make get_input()
also accept just a \n as a line terminator (Mac users: do you
also need the \r-only version ?)
The option parsing in manager.conf is not very efficient, and needs
to be cleaned up and made similar to what we have in http.conf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and implement services over tcp and/or tcp-tls.
This commit is nothing more than moving structure definitions
(and documentation) from main/http.c to include/asterisk/http.h
(temporary location until we find a better place), and removing the
'static' qualifier from server_root() and server_start().
The name change (adding the ast_ prefix as a minimum, and then
possibly a more meaningful name) is postponed to future commits.
Does not apply to other versions of asterisk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48324 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r48273 dealt with the comments and such, this deals with the code itself.
(This couldn't have been easily done if it weren't for 48273 - thanks again for that merbanan)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementing T.140 support in RTP.
T.140/RFC 4351 is TDD over IP - text telephony for hearing impaired.
It defines a realtime text chat, much like the old "talk" application
in Unix.
T.140 is character by character in real time. It's not
the same as our current MESSAGE format - that is more like IM, but
can be gatewayed to MESSAGE with a text "codec" if needed.
More patches will follow, as soon as we've separated this code from
the video capabilities functions in the videocaps branch.
Code by John Martin, Aupix (disclaimer on file)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Encapsulate RTP timers to the RTP structure, so we have one set for video and one for audio
- Document RTP keepalive configuration option
- Cleanup and document the monitor support function to hangup on RTP timeouts
- Add RTP keepalive to SIP show settings
Imported from 1.4 with modifications for trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add some more documentation for the ast_dynamic_str_............() function
to document the behavior of the function in the case of a partial write.
Also, document the return value and note that the function should never need
to be called directly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
as well as what the motivation is for using it.
- Add a comment by the declaration of ast_inet_ntoa() noting that this function
is not reentrant, and the result of a previous call to the function is no
longer valid after calling it again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Document cause codes
- Document a bit more on channel variables - global, predefined and local
- Fix some doxygen in channel.h. Adding one comment for two definitions does not
work. They won't be copied to each.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
without duplicating the macro or the code:
/*!
* In many cases we need to print singular or plural
* words depending on a count. This macro helps us e.g.
* printf("we have %d object%s", n, ESS(n));
*/
#define ESS(x) ((x) == 1 ? "" : "s")
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now you can specify a cli command as
"console autoanswer [on|off]"
which means the on|off argument is optional, or
"console {mute|unmute}"
which means the mute|unmute argument is mandatory.
The blocks in [] or {} do not necessarily need to be at the
end of the string.
Completions for the variant parts are generated automatically.
This should significantly simplify the implementation of
the various handlers.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the NEW_CLI macro now supports extra arguments (to deprecate other commands).
use this to implement unload and reload, and remove some unused functions.
usual completion fixes (as these function accept multiple arguments).
The summary is still a bit inconsistent.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47654 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change basically simplifies the interface of the
new-style handler removing almost all the tricks used in
the previous implementation to achieve backward compatibility
(which is still present and guaranteed.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
WATCH OUT: this changes the binary interface (ABI) for modules,
so e.g. users of g729 codecs need a rebuilt module (but read below).
The new way to write CLI handlers is described in detail in cli.h,
and there are a few converted handlers in cli.c, look for NEW_CLI.
After converting a couple of commands i am convinced that
it is reasonably convenient to use, and it makes it easier to fix the
pending CLI issues.
On passing, note a bug with the current 'complete' architecture:
if a command is a prefix of multiple CLI entries, we miss some
of the possible options. As an example, "core set debug" can
continue with "channel" from one CLI entry, and "off" or "atleast"
from another one.
We address this problem in a separate commit
(when i have figured out a fix, that is).
ABI issues:
I asked Kevin if it was ok to make this change and he said yes.
While it would have been possible to make the change without breaking
the module ABI, the code would have been more convoluted.
I am happy to restore the old ABI (while still being able
to use the "new style" handlers) if there is demand.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Kevin P. Fleming
Russell Bryant
Jason Parker
Tilghman Lesher
Philippe Sultan
Dwayne M. Hubbard
Luigi Rizzo
Steve Murphy
Mark Michelson
Joshua Colp
Doug Bailey
Olle Johansson
Nadi Sarrar
Paul Cadach
TransNexus OSP Development
Matt O'Gorman