- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110019 | file | 2008-03-19 15:20:28 -0300 (Wed, 19 Mar 2008) | 6 lines
Make sure that the mark bit does not incorrectly cause video frame timestamps to be calculated as if they are audio frames.
(closes issue #11429)
Reported by: sperreault
Patches:
11429-frametype.diff uploaded by qwell (license 4)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix a number of other places where the number of samples in a G722 frame was
not properly handled because of various reasons.
main/rtp.c:
- When a G722 frame is read from the smoother, the number of samples in the
frame must be divided by 2 before being sent out over the network. Even
though G722 is 16 kHz, an error in some previous spec has made it so that
we have to list the number of samples such as if it was 8 kHz.
main/file.c:
- When scheduling the next time to expect a frame, take into account that the
format of the file we're reading from may not be 8 kHz.
codecs/codec_g722.c:
- When converting from G722 to slinear, g722_decode() expects its samples
parameter to be in the silly (real samples / 2) format. Make it so.
- When converting from slinear to G722, properly set the number of samples in
the frame to be the number of bytes of output * 2.
formats/format_pcm.c:
- This format module handles G722, among a number of other formats. However,
the read() and seek() functions did not account for the fact that G722 has
2 samples per byte.
(closes issue #12130, reported by rickross, patched by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105932 | russell | 2008-03-04 19:52:18 -0600 (Tue, 04 Mar 2008) | 5 lines
Fix a bug that I just noticed in the RTP code. The calculation for setting the
len field in an ast_frame of audio was wrong when G.722 is in use. The len field
represents the number of ms of audio that the frame contains. It would have
set the value to be twice what it should be.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105933 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105674 | file | 2008-03-04 14:05:28 -0400 (Tue, 04 Mar 2008) | 8 lines
When a new source of audio comes in (such as music on hold) make sure the marker bit gets set.
(closes issue #10355)
Reported by: wdecarne
Patches:
10355.diff uploaded by file (license 11)
(closes issue #11491)
Reported by: kanderson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103780 | tilghman | 2008-02-18 11:31:52 -0600 (Mon, 18 Feb 2008) | 9 lines
When a SIP channel is being auto-destroyed, it's possible for it to still be
in bridge code. When that happens, we crash. Delay the RTP destruction until
the bridge is ended.
(closes issue #11960)
Reported by: norman
Patches:
20080215__bug11960__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: norman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100465 | tilghman | 2008-01-27 15:59:53 -0600 (Sun, 27 Jan 2008) | 11 lines
When deleting a task from the scheduler, ignoring the return value could
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98943 | russell | 2008-01-15 17:26:52 -0600 (Tue, 15 Jan 2008) | 25 lines
Commit a fix for some memory access errors pointed out by the valgrind2.txt
output on issue #11698.
The issue here is that it is possible for an instance of a translator to get
destroyed while the frame allocated as a part of the translator is still being
processed. Specifically, this is possible anywhere between a call to ast_read()
and ast_frame_free(), which is _a lot_ of places in the code. The reason this
happens is that the channel might get masqueraded during this time. During a
masquerade, existing translation paths get destroyed.
So, this patch fixes the issue in an API and ABI compatible way. (This one is
for you, paravoid!)
It changes an int in ast_frame to be used as flag bits. The 1 bit is still used
to indicate that the frame contains timing information. Also, a second flag has
been added to indicate that the frame came from a translator. When a frame with
this flag gets released and has this flag, a function is called in translate.c to
let it know that this frame is doing being processed. At this point, the flag gets
cleared. Also, if the translator was requested to be destroyed while its internal
frame still had this flag set, its destruction has been deffered until it finds out
that the frame is no longer being processed.
Admittedly, this feels like a hack. But, it does fix the issue, and I was not able
to think of a better solution ...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98325 | file | 2008-01-11 15:51:10 -0400 (Fri, 11 Jan 2008) | 6 lines
If the incoming RTP stream changes codec force the bridge to break if the other side does not support it.
(closes issue #11729)
Reported by: tsearle
Patches:
new_codec_patch_udiff.patch uploaded by tsearle (license 373)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98334 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r92204 | file | 2007-12-10 12:36:15 -0400 (Mon, 10 Dec 2007) | 6 lines
Add G729A as another possible payload name for G729. Some devices use this instead of G729, which is perfectly normal since the payload number itself is defined and can't be used by anything else so the name doesn't matter that much.
(closes issue #11483)
Reported by: revolution
Patches:
rtp.diff uploaded by revolution (license 346)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also by accident fixed a bad typo by a previous committer, which actually made video calls
not work fully...
Merged revisions 89630 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89630 | oej | 2007-11-27 16:23:17 +0100 (Tis, 27 Nov 2007) | 12 lines
If we get a codec offer using a well-known payload type, but using it for another
codec that we don't know, Asterisk did not remove that codec from the list.
With this patch, we remove the codec from audio and video rtp objects and
deny it ever existed. Thanks to lasse for testing.
(closes issue #11376)
Reported by: lasse
Patches:
bug11376.txt uploaded by oej (license 306)
Tested by: lasse
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fixes a few cli messages and some minor formatting.
(closes issue #11001)
Reported by: seanbright
Patches:
newcli.1.patch uploaded by seanbright (license 71)
newcli.2.patch uploaded by seanbright (license 71)
newcli.4.patch uploaded by seanbright (license 71)
newcli.5.patch uploaded by seanbright (license 71)
newcli.6.patch uploaded by seanbright (license 71)
newcli.7.patch uploaded by seanbright (license 71)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85552 | file | 2007-10-15 11:55:04 -0300 (Mon, 15 Oct 2007) | 4 lines
If Monitor or a spy was added to a P2P or native bridged channel bring the channel back to the generic bridging core so the monitor or spy operations work.
(closes issue #10943)
Reported by: julianjm
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r84818 | file | 2007-10-05 15:55:36 -0300 (Fri, 05 Oct 2007) | 4 lines
Update the remembered RTP peer information when putting an endpoint on hold or taking it off hold so that the RTP stack does not initiate a needless reinvite.
(closes issue #10868)
Reported by: mavince
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a patch for it. It replaces a bunch of simple calls to snprintf with ast_copy_string
(closes issue #10843)
Reported by: Corydon76
Patches:
2007092900_10843.diff uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Michiel van Baak
Russell Bryant
Olle Johansson
Joshua Colp
Tilghman Lesher
Luigi Rizzo
Jason Parker