This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
If in Debian or system based, dont have aptitude installed the script do
nothing. This patch checked if aptitude installed, if not installed.
Also, if execute script with all packages installed yet, the script not show
nothing and return exit 1 because the command 'grep' get nothing from pipe from
'awk'.
ASTERISK-25113 #close
Reported By: Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>
Change-Id: Iebdff55805d3917166e5e08e0a1e2176f36ff27f
There are 3 ways that calls directly to standard allocator functions can
be dealt with:
1. Block their use, cause them to generate an error. This is the default.
2. Replace them with the Asterisk equivalent function calls.
3. Leave them alone.
This change allows one of these 3 options to be selected by any source.
The source just needs to define ASTMM_LIBC to ASTMM_BLOCK, ASTMM_REDIRECT,
or ASTMM_IGNORE to use option 1, 2 or 3 respectively. Normally ASTMM_BLOCK
is the correct option, so it is default when ASTMM_LIBC is not defined.
In some cases when building 3rd party code it is desirable to have it use
Asterisk functions, without changing the whole source - ASTMM_REDIRECT
accomplishes this. When using 3rd party libraries sometimes a static
inline function will make use of malloc or free. In these cases it may
be unsafe to replace the allocator in the header, as it's possible the
memory could be freed by the library using standard allocators. For
those cases ASTMM_IGNORE is needed.
Change-Id: I8afef4bc7f3b93914263ae27d3a5858b69663fc7
Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in
Changed /Makefile to copy asterisk-ng-doxygen.in to
asterisk-ng-doxygen then modify it with version instead of
modifying asterisk-ng-doxygen directly. Updated clean
targets as well.
Updated /.gitignore and doc/.gitignore.
Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622
* Added a lookbehind to one-line comment matcher to skip escaped
semicolons.
* Added support for block comments.
Change-Id: Id17dfaeda8ed4be572e8107a0c010066584aaee7
The upgrade script for auto DTMF mode (31cd4f4891ec) added in 88b0fa7755
failed to add ENUM support for Postgres databases. This requires a
specific import from the sqlalchemy.dialects.postgresql package. This
patch corrects this error, which allows for Postgres update scripts to
be generated.
ASTERISK-24706
Change-Id: I4742ac8efa533cd6f18e0bdd907b339a9aedf015
* The REF_DEBUG compiler flag no longer has any effect on code that uses
Astobj2. It is used to determine if reference debugging is enabled by
default. Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
This was possible now that we no longer require a dual ABI.
ASTERISK-24974 #close
Reported by: Corey Farrell
Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
The basic issues are that changes in contact status don't cause events to be
emitted for the associated endpoint. Only dynamic contact add/delete actions
update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds
which is a long time.
This patch makes use of the new transaction timeout feature in r4585 and
provides the following capabilities...
1. A new aor/contact variable 'qualify_timeout' has been added that allows the
user to specify the maximum time in milliseconds to wait for a response to an
OPTIONS message. The default is 3000ms. When the timer expires, the contact is
marked unavailable.
2. Contact status changes are now propagated up to the endpoint as follows...
When any contact is 'Available', the endpoint is marked as 'Reachable'. When
all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The
existing endpoint events are generated appropriately.
ASTERISK-24863 #close
Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
Tested-by: Dmitriy Serov
Tested-by: George Joseph <george.joseph@fairview5.com>
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
........
Merged revisions 434637 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The script was added in 13, but when committed to trunk it caused a branch to
occur due to some trunk only alemebic changes. This fixes it so that the new
'add_pjsip_endpoint_identifier_order script points to the correct down revision.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433152 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
........
Merged revisions 433028 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
........
Merged revisions 432638 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On Debian based systems, the install_prereq tool uses a search command on
Debian that results in selecting both 64-bit and 32-bit packages. Besides the
waste of disk space, this can actually cause aptitude use 100% of memory on a
VM with 1GB of RAM as it tried to work out all of the 32-bit package
dependencies.
This patch filters out the 32-bit packages on a 64-bit machine, and leaves
32-bit machines alone.
ASTERISK-24048 #close
Reported by: Ben Klang
Tested by: Ben Klang, Matt Jordan
patches:
install_prereq_64-bit_compat.patch uploaded by Ben Klang (License 5876)
........
Merged revisions 430798 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430799 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430800 65c4cc65-6c06-0410-ace0-fbb531ad65f3
General improvements to SIP to PJSIP conversion utility:
1) track default section of input file to allow parsing
an include file that doesn't specify a [section]
2) informatively handle case of assignment without [section]
3) correctly handle getting sections from included files
- [section]'s are inherited by included file
4) provide null string as default transport bind ip
5) gracefully handle missing portions of registration string
6) denote steps of operation during conversion and confirm
top level files as a convenience
ASTERISK-24474 #close
Review: https://reviewboard.asterisk.org/r/4280/
Reported by: John Kiniston
........
Merged revisions 430469 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an option, moh_passthrough, that when enabled will pass
hold and unhold requests through using a SIP re-invite. When placing on
hold a re-invite with sendonly will be sent and when taking off hold a
re-invite with sendrecv will be sent. This allows remote servers to handle
the musiconhold instead of the local Asterisk instance being responsible.
Review: https://reviewboard.asterisk.org/r/4103/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This gets rid of most old libc free/malloc/realloc and replaces them
with ast_free and friends. When compiling with MALLOC_DEBUG you'll
notice it when you're mistakenly using one of the libc variants. For
the legacy cases you can define WRAP_LIBC_MALLOC before including
asterisk.h.
Even better would be if the errors were also enabled when compiling
without MALLOC_DEBUG, but that's a slightly more invasive header
file change.
Those compiling addons/format_mp3 will need to rerun
./contrib/scripts/get_mp3_source.sh.
ASTERISK-24348 #related
Review: https://reviewboard.asterisk.org/r/4015/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
For example:
rule_name, time, min_penalty, max_penalty
'default', '10', '20', '30'
'test2', '20', '30', '55'
'test2', '25', '-11', '+1111'
'test2', '400', '112', '333'
'test3', '0', '4564', '46546'
'test_rule', '40', '15', '50'
which would result in :
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
........
Merged revisions 420624 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When run in offline mode, this would attempt to check the database for
the presence of a type it was going to try to create. I now check the
context to see if we're running in offline mode and change a parameter
accordingly.
........
Merged revisions 407567 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Increased the sippeers useragent max string size to 255.
* Changed the queue_members uniqueid to an auto incremented integer
instead of a string.
* Increased the voicemail_messages BLOB size to LONGBLOB on mysql.
* Fixed the add_tables_for_pjsip config change version downgrade actions
to drop a table it created.
* Adjusted the sample alembic.ini files cdr.ini.sample, config.ini.sample,
and voicemail.ini.sample to give a mysql and postgres sqlalchemy.url
lines.
ASTERISK-23847 #close
Reported by: Stephen More
ASTERISK-23825 #close
Reported by: Stephen More
ASTERISK-23909 #close
Reported by: Stephen More
Review: https://reviewboard.asterisk.org/r/3870/
........
Merged revisions 420211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
........
Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes res_pjsip_pubsub persist inbound subscriptions in sorcery. By default
this uses the local astdb but it can also be configured to store within an outside
database. When Asterisk is started these subscriptions are recreated if they have not
expired. Notifications are sent to the devices which have subscribed and they are none
the wiser that the system has restarted.
Review: https://reviewboard.asterisk.org/r/3598/
........
Merged revisions 415766 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From now on, make install will overwrite safe_asterisk with the
latest version. You need to move any local modifications to files
inside /etc/asterisk/startup.d, if you have any.
See also commits r394939 and r397938.
ASTERISK-21965 #close
Patches:
safe_asterisk.patch uploaded by jkister (License 6232, modified by me)
........
Merged revisions 415748 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleans up the safe_asterisk script and adds the ASTSAFE_FOREGROUND
option that allows the debian asterisk init script to capture the
right pid.
* Drop the vim #modeline which wasn't used. Use test consistently
without the odd configure xno syntax. Double quote all paths.
General cleanup.
* Don't output message()s to the console but only to TTY if set.
* Allow TTY to be "no" as well as empty (debian compatibility with
debian/patches/safe_asterisk-config).
* Add option to export ASTSAFE_FOREGROUND=1 from the init script
that calls this to disable backgrounding. Debian uses a similar
method in debian/patches/safe_asterisk-nobg).
ASTERISK-23492 #close
Review: https://reviewboard.asterisk.org/r/3574/
........
Merged revisions 415132 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415171 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415172 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When generating SQL files via the repotools alembic_creator.py script, a
configuration object is used programatically with SQLAlechemy, as opposed to
a configuration file. This patch ignores failures to interpret a config file,
as ... there isn't one in this case.
........
Merged revisions 414763 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The string lengths on certain columns created through alembic for PJSIP were
too short. For instance, columns containing URIs are currently set to 40
characters, but this can be too small and result in truncated values. Added
an alembic migration script that increases the size of these columns and a
few others to 255.
ASTERISK-23639 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3475/
........
Merged revisions 412992 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
Mark Michelson
Kevin Harwell
Rodrigo Ramírez Norambuena
Corey Farrell
George Joseph
Ivan Poddubny
Matt Jordan
Diederik de Groot
Richard Mudgett
Walter Doekes
Scott Griepentrog
Jonathan Rose
Tzafrir Cohen