contributed pjproject - patch to check sub->pending_notify
in evsub.c:on_tsx_state before calling
pjsip_evsub_send_request()
res_pjsip_pubsub - change post pjsip 2.13 behavior to use
pubsub_on_refresh_timeout to avoid the ao2_cleanup call on
the sub_tree. This is is because the final NOTIFY send is no
longer the last place the sub_tree is referenced.
ASTERISK-30419
Change-Id: Ib5cc662ce578e9adcda312e16c58a10b6453e438
Removed multiple patches.
Code chages in res_pjsip_pubsub due to changes in evsub.
Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().
Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.
Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.
A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.
ASTERISK-30325
Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f
Added NULL pointer check and channel lock to prevent resource release
while the chanspy is processing.
ASTERISK-29604
Change-Id: Ibdc675f98052da32333b19685b1708a3751b6d24
Variable references within global variable assignments are now
expanded rather than being included literally.
ASTERISK-30406 #close
Change-Id: I136e8d6395e90a4c92d9777a46a7bc3edb08d05d
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
Rounding issues with double math were causing rtp timestamp
slips in outgoing packets. We're now back to integer math
and are getting no more slips.
ASTERISK-30391
Change-Id: I6ba992b49ffdf9ebea074581dfa784a188c661a4
Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850).
ASTERISK-30319 #close
Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645
-----------------
This commit reinstates MES with some casting fixes to the
functions in time.h that convert between doubles and timeval
structures. The casting issues were causing incorrect
timestamps to be calculated which caused transcoding from/to
G722 to produce bad or no audio.
ASTERISK-30391
-----------------
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038
When Asterisk receives a new websocket conenction, it creates a new
pjsip transport for it and copies connection data into it. The
transport manager then uses the remote IP address and port on the
transport to create a monitor for each connection. However, the
remote port wasn't being copied, only the IP address which meant
that the transport manager was creating only 1 monitoring entry for
all websocket connections from the same IP address. Therefore, if
one of those connections failed, it deleted the transport taking
all the the connections from that same IP address with it.
* We now copy the remote port into the created transport and the
transport manager behaves correctly.
ASTERISK-30369
Change-Id: Ib506d40897ea6286455ac0be4dfbb0ed43b727e1
Do not crash when a URL has no path component as in this case the
ast_uri_path function will return NULL. Make the code cope with not
having a path.
The below would crash
> media cache create http://google.com /tmp/foo.wav
Thread 1 "asterisk" received signal SIGSEGV, Segmentation fault.
0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6
(gdb) bt
#0 0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6
#1 0x0000ffff43d43a78 in file_extension_from_string (str=<optimized out>, buffer=buffer@entry=0xffffca9973c0 "",
capacity=capacity@entry=64) at res_http_media_cache.c:288
#2 0x0000ffff43d43bac in file_extension_from_url_path (bucket_file=bucket_file@entry=0x3bf96568,
buffer=buffer@entry=0xffffca9973c0 "", capacity=capacity@entry=64) at res_http_media_cache.c:378
#3 0x0000ffff43d43c74 in bucket_file_set_extension (bucket_file=bucket_file@entry=0x3bf96568) at res_http_media_cache.c:392
#4 0x0000ffff43d43d10 in bucket_file_run_curl (bucket_file=0x3bf96568) at res_http_media_cache.c:555
#5 0x0000ffff43d43f74 in bucket_http_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>)
at res_http_media_cache.c:613
#6 0x0000000000487638 in bucket_file_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>)
at bucket.c:191
#7 0x0000000000554408 in sorcery_wizard_create (object_wizard=object_wizard@entry=0x3b9f0718,
details=details@entry=0xffffca9974a8) at sorcery.c:2027
#8 0x0000000000559698 in ast_sorcery_create (sorcery=<optimized out>, object=object@entry=0x3bf96568) at sorcery.c:2077
#9 0x00000000004893a4 in ast_bucket_file_create (file=file@entry=0x3bf96568) at bucket.c:727
#10 0x00000000004f877c in ast_media_cache_create_or_update (uri=0x3bfa1103 "https://google.com",
file_path=0x3bfa1116 "/tmp/foo.wav", metadata=metadata@entry=0x0) at media_cache.c:335
#11 0x00000000004f88ec in media_cache_handle_create_item (e=<optimized out>, cmd=<optimized out>, a=0xffffca9976b8)
at media_cache.c:640
ASTERISK-30375 #close
Change-Id: I6a9433688cb5d3d4be8758b7642d923bdde6c273
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
ASTERISK-30280
Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a
Currently, there is no Caller ID available to us when
checking for an extension match when handling INVITEs.
As a result, extension patterns that depend on the Caller ID
are not matched and calls may be incorrectly rejected.
The Caller ID is not available because the supplement that
adds Caller ID to the session does not execute until after
this check. Supplement callbacks cannot yet be executed
at this point since the session is not yet in the appropriate
state.
To fix this without impacting existing behavior, the Caller ID
number is now retrieved before attempting to pattern match.
This ensures pattern matching works correctly and there is
no behavior change to the way supplements are called.
ASTERISK-28767 #close
Change-Id: Iec7f5a3b90e51b65ccf74342f96bf80314b7cfc7
When a call is put on hold and it has moh_passthrough and rtp_timeout
set on the endpoint, the wrong timeout will be used. rtp_timeout_hold is
expected to be used, but rtp_timeout is used instead. This change adds a
couple of checks for locally_held to determine if rtp_timeout_hold needs
to be used instead of rtp_timeout.
ASTERISK-30350
Change-Id: I7b106fc244332014216d12bba851cefe884cc25f
Fix aor lookup on sip path addition. Issue happens in case of dialing
with @ and overriding user part of RURI.
ASTERISK-30100 #close
Reported-by: Yury Kirsanov
Change-Id: I3f2c42a583578c94397b113e32ca3ebf2d600e13
The `ast_geoloc_datastore_add_eprofile` function does not return 0 on
success, it returns the size of the underlying datastore. This means
that the datastore will be freed and its pointer set to NULL when no
error occured at all.
ASTERISK-30346
Change-Id: Iea9b209bd1244cc57b903b9496cb680c356e4bb9
When adding AOC to an outgoing response the code
assumed that a body would exist for comparing the
Content-Type. This isn't always true.
The code now checks to make sure the response has
a body before checking the Content-Type.
ASTERISK-21502
Change-Id: Iaead371434fc3bc693dad487228106a7d7a5ac76
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
When passing a JSON body to the 'create' channel route
it would be converted into Asterisk variables, but never
freed resulting in a memory leak.
This change makes it so that the variables are freed in
all cases.
ASTERISK-30344
Change-Id: I924dbd866a01c6073e2d6fb846ccaa27ef72d49d
This fixes a small typo in the from_domain documentation on the endpoint documentation
ASTERISK-30328 #close
Change-Id: Ia6f0897c3f5cab899ef2cde6b3ac07265b8beb21
Adds support for the capture agent name field
of the Homer protocol to Asterisk by allowing
users to specify a name that will be sent to
the HEP server.
ASTERISK-30322 #close
Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b
Some SIP devices use an empty extension for PLAR functionality.
Rather than rejecting these empty extensions, we now use the s
extension for such calls to mirror the existing PLAR functionality
in Asterisk (e.g. chan_dahdi).
ASTERISK-30265 #close
Change-Id: I0861a405cd49bbbf532b52f7b47f0e2810832590
Updates the documentation for the 'contact_user' field to point out the
default outbound contact if no contact_user is specified 's'
ASTERISK-30316 #close
Change-Id: I61f24fb9164e4d07e05908a2511805281874c876
The commit that rearchitected media formats,
a2c912e997 (ASTERISK_23114)
introduced a regression by improperly translating code in res_adsi.c.
In particular, the pointer to the frame buffer was initialized
at the top of adsi_careful_send, rather than dynamically updating it
for each frame, as is required.
This resulted in the first frame being repeatedly sent,
rather than advancing through the frames.
This corrupted the transmission of the CAS to the CPE,
which meant that CPE would never respond with the DTMF acknowledgment,
effectively completely breaking ADSI functionality.
This issue is now fixed, and ADSI now works properly again.
ASTERISK-29793 #close
Change-Id: Icdeddf733eda2981c98712d1ac9cddc0db507dbe
Adds support for custom URI and header parameters
in the From header in PJSIP. Parameters can be
both set and read using this function.
ASTERISK-30150 #close
Change-Id: Ifb1bc3c512ad5f6faeaebd7817f004a2ecbd6428
It was possible for a module that registered for transport monitor
events to pass in a pjsip_transport that had already been freed.
This caused pjsip_transport_events to crash when looking up the
monitor for the transport. The fix is a two pronged approach.
1. We now increment the reference count on pjsip_transports when we
create monitors for them, then decrement the count when the
transport is going to be destroyed.
2. There are now APIs to register and unregister monitor callbacks
by "transport key" which is a string concatenation of the remote ip
address and port. This way the module needing to monitor the
transport doesn't have to hold on to the transport object itself to
unregister. It just has to save the transport_key.
* Added the pjsip_transport reference increment and decrement.
* Changed the internal transport monitor container key from the
transport->obj_name (which may not be unique anyway) to the
transport_key.
* Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that
fills a buffer with the transport_key using a passed-in
pjsip_transport.
* Added the following functions:
ast_sip_transport_monitor_register_key
ast_sip_transport_monitor_register_replace_key
ast_sip_transport_monitor_unregister_key
and marked their non-key counterparts as deprecated.
* Updated res_pjsip_pubsub and res_pjsip_outbound_register to use
the new "key" monitor functions.
NOTE: res_pjsip_registrar also uses the transport monitor
functionality but doesn't have a persistent object other than
contact to store a transport key. At this time, it continues to
use the non-key monitor functions.
ASTERISK-30244
Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b
This PR contains two relatively separate changes in channel.c and
res_pjsip_session.c which ensure that topology changes are not ignored
in cases where they should be handled.
For channel.c:
The function ast_channel_request_stream_topology_change only triggers a
stream topology request change indication, if the channel's topology
does not equal the requested topology. However, a channel could be in a
state where it is currently "negotiating" a new topology but hasn't
updated it yet, so the topology request change would be lost. Channels
need to be able to handle such situations internally and stream
topology requests should therefore always be passed on.
In the case of chan_pjsip for example, it queues a session refresh
(re-INVITE) if it is currently in the middle of a transaction or has
pending requests (among other reasons).
Now, ast_channel_request_stream_topology_change always indicates a
stream topology request change even if the requested topology equals the
channel's topology.
For res_pjsip_session.c:
The function resolve_refresh_media_states does not process stream state
changes if the delayed active state differs from the current active
state. I.e. if the currently active stream state has changed between the
time the sip session refresh request was queued and the time it is being
processed, the session refresh is ignored. However, res_pjsip_session
contains logic that ensures that session refreshes are queued and
re-queued correctly if a session refresh is currently not possible. So
this check is not necessary and led to some session refreshes being
lost.
Now, a session refresh is done even if the delayed active state differs
from the current active state and it is checked whether the delayed
pending state differs from the current active - because that means a
refresh is necessary.
Further, the unit test of resolve_refresh_media_states was adapted to
reflect the new behavior. I.e. the changes to delayed pending are
prioritized over the changes to current active because we want to
preserve the original intention of the pending state.
ASTERISK-30184
Change-Id: Icd0703295271089057717006730b555b9a1d4e5a
The "RECORD FILE" command in res_agi has its own
implementation for actually doing the recording. This
has resulted in it not actually obeying the option
"transmit_silence" when recording.
This change causes it to now send silence if the
option is enabled.
ASTERISK-30314
Change-Id: Ib3a85601ff35d1b904f836691bad8a4b7e957174
When a websocket (or potentially any stateful connection) is quickly
created then destroyed, it is possible that the qualify thread will
destroy the transaction before the initialzing thread is finished
with it.
Depending on the timing, this can cause an assertion within pjsip.
To prevent this, ast_send_stateful_response will now create the group
lock and add a reference to it before creating the transaction.
While this should resolve the crash, there is still the potential that
the contact will not be cleaned up properly, see:ASTERISK~29286. As a
result, the contact has to 'time out' before it will be removed.
ASTERISK-28689
Change-Id: Id050fded2247a04d8f0fc5b8a2cf3e5482cb8cee
Current registration code use pjsip_parse_uri to verify outbound_proxy
that is different from the reading this option for the endpoint. This
made value with multiple proxies invalid for registration pjsip settings.
Removing URI validation helps to use registration through multiple proxies.
ASTERISK-30217 #close
Change-Id: I064558e66f04b9f3260c46181812a01349761357
Fix compilation errors caused by using size_t
instead of uintmax_t and non-portable format
specifiers.
ASTERISK-30273 #close
Change-Id: I363e6057ef84d54b88af80d23ad6147eef9216ee
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
The PJSIP notify CLI commands allow for using
"options" configured in pjsip_notify.conf.
This allows these same options to be used in
AMI actions as well.
Additionally, as part of this improvement,
some repetitive common code is refactored.
ASTERISK-30263 #close
Change-Id: Ie4496b322b63b61eaf9672183a959ab99a04b6b5
Expands the pjsip logger to support the ability to filter
by SIP message method. This can make certain types of SIP debugging
easier by only logging messages of particular method(s).
ASTERISK-30146 #close
Co-authored-by: Sean Bright <sean@seanbright.com>
Change-Id: I9c8cbb6fc8686ef21190eb42e08bc9a9b147707f
pjproject does not provide any mechanism of removing
event packages, which means that once a subscription
handler is registered, it is effectively permanent.
pjproject will assert if the same event package is
ever registered again, so currently unloading and
loading any Asterisk modules that use subscriptions
will cause a crash that is beyond our control.
For that reason, we now prevent users from being
able to unload these modules, to prevent them
from ever being loaded twice.
ASTERISK-30264 #close
Change-Id: I7fdcb1a5e44d38b7ba10c44259fe98f0ae9bc12c
Add enum to allow setting optional direction. If set to only one
direction, only feed matching-direction frames to the associated
slin factory.
This prevents mangling the transcoder on non-mixed frames when the
READ and WRITE frames would have otherwise required it. Also
removes the need to mute or discard the un-wanted frames as they
are no longer added in the first place.
res_stasis_snoop is changed to use this addition to set direction
on audiohook based on spy direction.
If no direction is set, the ast_audiohook_init will init this enum
to BOTH which maintains existing functionality.
ASTERISK-30252
Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb
Adds support for detecting audible ringback tone
to the TONE_DETECT function using the p option.
ASTERISK-30254 #close
Change-Id: Ie2329ff245248768367d26749c285fbe823f6414
"fname" is passed in as a const char *, but strstr() mangles that
into a char *, and we were attempting to modify the string in place.
This is an unwanted (and undocumented) side-effect.
ASTERISK-30213
Change-Id: Ifa36d352aafeb7f9beec3f746332865c7d21e629
Also added a note to the geolocation.conf.sample file
and added a README to the res/res_geolocation/wiki
directory.
Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc
This patch adds support for mediasec SIP headers and SDP attributes.
These are defined in RFC 3329, 3GPP TS 24.229 and
draft-dawes-sipcore-mediasec-parameter. The new features are
implemented so that a backbone for RFC 3329 is present to streamline
future work on RFC 3329.
With this patch, Asterisk can communicate with Deutsche Telekom trunks
which require these fields.
ASTERISK-30032
Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2
Avoid crashing by skipping invisible bridges and checking the
snapshot for a null pointer. In effect this is how the bridges
are enumerated in res/ari/resource_bridges.c already.
ASTERISK-30239
ASTERISK-30237
Change-Id: I58ef9f44036feded5966b5fc70ae754f8182883d
If geolocation is not in use for an endpoint, the NOTICE
log level is currently spammed with messages about this,
even though nothing is wrong and these messages provide
no real value. These log messages are therefore changed
to debugs.
ASTERISK-30241 #close
Change-Id: I656b355d812f67cc0f0fdf09b00b0e1458598bb4
This patch adds a new option to the 100rel parameter for pjsip
endpoints called "peer_supported". When an endpoint with this option
receives an incoming request and the request indicated support for the
100rel extension, then Asterisk will send 1xx responses reliably. If
the request did not indicate 100rel support, Asterisk sends 1xx
responses normally.
ASTERISK-30158
Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad
Adding user=phone to local-side uri's when user_eq_phone=yes is set for
an endpoint. Previously this would only add the header to the To and R-URI.
ASTERISK-30178
Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600
Fixed a segfault caused by var_list_from_loc_info() encountering
an empty location info element.
Fixed an issue in ast_strsep() where a value with only whitespace
wasn't being preserved.
Fixed an issue in ast_variable_list_from_quoted_string() where
an empty value was considered a failure.
ASTERISK-30215
Reported by: Dan Cropp
Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a
This change adds an option, answeredonly, that will prevent music on
hold on channels that are not answered.
ASTERISK-30135
Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08
This change allows TEL URI requests to come through for basic calls. The
allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To
headers will now allow TEL URIs, as well as the request URI.
Support is only for TEL URIs present in traffic from a remote party.
Asterisk does not generate any TEL URIs on its own.
ASTERISK-26894
Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a
We're validating the following functionality:
encrypting a block of data with RSA
decrypting a block of data with RSA
signing a block of data with RSA
verifying a signature with RSA
encrypting a block of data with AES-ECB
encrypting a block of data with AES-ECB
as well as accessing test keys from the keystore.
ASTERISK-30045 #close
Change-Id: I0d10e7b41009c5290a4356c6480e636712d5c96d
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
When producing an outgoing SDP we iterate through the configured
formats and produce SDP information. It is possible for some
configured formats to not have SDP information available. If this
is the case we skip over them to allow the SDP to still be
produced.
ASTERISK-29185
Change-Id: I3e37569aa4ca341260e6ca5904dc2f75e46a1749
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
Fixes two typos that cause fax detection to not work.
One refers to the wrong frame variable, and the other
refers to the subclass.integer instead of the frametype
as it should.
ASTERISK-30192 #close
Change-Id: I7b35fdb7bcf25a29a212eee37c20812c64ab3ef1
Set termination state to old subscriptions to prevent queueing and sending
NOTIFY messages on exten/device state changes.
Postpone destruction of old subscriptions until all already queued tasks
that may be using old subscriptions have completed.
ASTERISK-29906
Change-Id: I96582aad3a26515ca73a8460ee6756f56f6ba23b
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
Adjusts some logging levels to be more or less important,
that is more prominent when actual problems occur and less
prominent for less noteworthy things.
ASTERISK-30153 #close
Change-Id: Ifc8f7df427aa018627db462125ae744986d3261b
There are a handful of files in the tree that
reference an SVN link for the coding guidelines.
This removes these because the links are dead
and the vast majority of source files do not
contain these links, so this is more consistent.
app_skel still maintains an (up to date) link
to the coding guidelines.
ASTERISK-30159 #close
Change-Id: I35bbb20f66982e98099cff3029ede20091ffdac7
Move the call to ast_sip_location_prune_boot_contacts() *after* the call
to ast_res_pjsip_init_options_handling() so that
res/res_pjsip/pjsip_options.c is informed about the contact deletion and
updates its sip_options_contact_statuses list. This allows for an AMI
event to be sent by res/res_pjsip/pjsip_options.c if the endpoint
registers again from the same remote address and port (i.e., same URI)
as used before the Asterisk restart.
ASTERISK-30109
Reported-by: Michael Neuhauser
Change-Id: I1ba4478019e4931a7085f62708d9b66837e901a8
line 196: loc_src = '\0';
should have been
line 196: *loc_src = '\0';
The issue was caught by the gcc optimizer complaining that
loc_src had a zero length because the pointer itself was being
set to NULL instead of the _contents_ of the pointer being set
to the NULL terminator.
ASTERISK-30138
Reported-by: Sean Bright
Change-Id: Id247be113cc8510f043ca053d5b4f5f3d32acd29
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
A sporadic test failure was happening when executing the AEAP
Websocket transport tests. It was originally thought this was
due to things not getting cleaned up fast enough, but upon further
investigation I determined the underlying cause was poll()
getting interrupted and this not being handled in all places.
This change adds EINTR and EAGAIN handling to the Websocket
client connect code as well as the AEAP Websocket transport code.
If either occur then the code will just go back to waiting
for data.
The originally disabled failure test case has also been
re-enabled.
ASTERISK-30099
Change-Id: I1711a331ecf5d35cd542911dc6aaa9acf1e172ad
Adds a CLI command similar to "dialplan eval function" except for
applications: "dialplan exec application", useful for quickly
testing certain application behavior directly from the CLI
without writing any dialplan.
ASTERISK-30062 #close
Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde
These new functions allow retrieving information from headers on 200 OK
INVITE response.
ASTERISK-29999
Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144
Switched res_pjsip_outbound_registration.so dep to optional. Added
module loaded check before using it.
ASTERISK-30101 #close
Change-Id: Ia34f1684d984e821fbdd4de8911f930337703666
Microsoft recently began rejecting all requests for
ICS calendars on Office 365 with 400 errors if
the request doesn't contain a user agent. See:
https://docs.microsoft.com/en-us/answers/questions/883904/34the-remote-server-returned-an-error-400-bad-requ.html
Accordingly, we now send a user agent on requests for
ICS files so that requests to Office 365 will work as
they did before.
ASTERISK-30106
Change-Id: Ie9dcaef12ae8adf37533c684499eb11005fac8f7
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Finding an application and executing it if found is
a common task throughout Asterisk. This adds a helper
function around pbx_exec to do this, to eliminate
redundant code and make it easier for modules to
substitute variables and execute applications by name.
ASTERISK-30061 #close
Change-Id: Ifee4d2825df7545fb515d763d393065675140c84
An m option to Park and ParkAndAnnounce now allows
specifying a music on hold class override.
ASTERISK-30087
Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e
Currently, PJSIP will randomly wait up to 10 seconds for each
outbound registration's initial attempt. The reason for this
is to avoid having all outbound registrations attempt to register
simultaneously.
This can create limitations with the test suite where we need to
be able to receive inbound calls potentially within 10 seconds of
starting up. For instance, we might register to another server
and then try to receive a call through the registration, but if
the registration hasn't happened yet, this will fail, and hence
this inconsistent behavior can cause tests to fail. Ultimately,
this requires a smaller random value because there may be no good
reason to wait for up to 10 seconds in these circumstances.
To address this, a new config option is introduced which makes this
maximum delay configurable. This allows, for instance, this to be
set to a very small value in test systems to ensure that registrations
happen immediately without an unnecessary delay, and can be used more
generally to control how "tight" the initial outbound registrations
are.
ASTERISK-29965 #close
Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd
When a pjsip endpoint is defined with timers=always, this has been a
functional noop. This patch correctly sets the feature bitmap to both
enable support for session timers and to enable them even when the
endpoint itself does not request or support timers.
ASTERISK-29603
Reported-By: Ray Crumrine
Change-Id: I8b5eeaa9ec7f50cc6d96dd34c2b4aa9c53fb5440
If there is scheduled notification, we must delete it
to avoid using destroyed subscriptions.
ASTERISK-29906
Change-Id: I1c644e5e15a8fe43eed8e4f9112f113cbf87a40f
res_calendar will trigger an assertion currently
if the ending time is calculated to be in the past.
Unlike the reminder and start times, however, there
is currently no check to catch non-positive times
and set them to 1. As a result, if we get a negative
value by happenstance, this can cause a crash.
To prevent the assertion from begin triggered, we now
use the same logic as the reminder and start events
to catch this issue before it can cause a problem.
ASTERISK-29981 #close
Change-Id: Idfb3204d195f350d2575fb4bc72a54a597d6e93c
Emits a warning if the user has requested a parking spot that
is out of bounds for the requested parking lot.
ASTERISK-30086
Change-Id: I1080371e4f63e94724455003753014fbd3f95fbf
The change "Add LOCAL/REMOTE tags in dialog-info+xml" set both "local"
Identity Element URI and Target Element URI to the same value -
the channel Caller Number.
For Identity Element it's ok to set as Caller ID.
But Local Target URI should be set as local URI.
In this case the Local Target URI can be used for Directed Call Pickup
by Polycom ip-phones (parameter useLocalTargetUriforLegacyPickup).
Also XML sanitized Display names.
ASTERISK-24601
Change-Id: If130a2f2f3b2339b14dca0ec0ebeea3a87b34343
Agi commnad exec can now evaluate dialplan functions and
variables if variable AGIEXECFULL is set to yes. this can
be useful when executing Playback or Read from agi.
ASTERISK-30058 #close
Change-Id: I669991f540496e7bddd096fec82b52c083036832
This change exposes the channel driver's unique id (i.e. the Call-ID
for chan_sip/chan_pjsip based channels) to ARI channel resources
as `protocol_id`.
ASTERISK-30027
Reported by: Moritz Fain
Tested by: Moritz Fain
Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87
As part of PJSIP 2.11 a behavior change was done to require
a matching remote hostname on an established transport for
secure transports. Since the Websocket transport is considered
a secure transport this caused the existing connection to not
be found and used.
We now set the remote hostname and the transport can be found.
ASTERISK-30065
Change-Id: Ia1cdef33e1411f927985b4b852c95e163c080e94
This is needed to be able to restore it in REGISTER responses,
otherwise the client won't be able to find the contact it created.
ASTERISK-30042
Change-Id: I0c5823918199acf09246b3b206fbde66773688f6
Adjusts the pjsip show registration(s) commands to show
the amount of seconds remaining until a registration
expires.
ASTERISK-29845 #close
Change-Id: Ic4fea15a1a1056c424416def49d1ca8e776c0483
Most issues were in stringfields and had to do with comparing
a pointer to an constant/interned string with NULL. Since the
string was a constant, a pointer to it could never be NULL so
the comparison was always "true". gcc now complains about that.
There were also a few issues where determining if there was
enough space for a memcpy or s(n)printf which were fixed
by defining some of the involved variables as "volatile".
There were also a few other miscellaneous fixes.
ASTERISK-30044
Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570
Adds version information for applications, functions,
and manager events/actions.
This is not completely exhaustive by any means but
covers most new things added that have release
versioning information in the issue tracker.
ASTERISK-29940 #close
Change-Id: I506401e93c799715dbbe97c0a8ba18af2bf5e131
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
Add framework to connect to, and read and write protocol based
messages from and to an external application using an Asterisk
External Application Protocol (AEAP). This has been divided into
several abstractions:
1. transport - base communication layer (currently websocket only)
2. message - AEAP description and data (currently JSON only)
3. transaction - links/binds requests and responses
4. aeap - transport, message, and transaction handler/manager
This patch also adds an AEAP implementation for speech to text.
Existing speech API callbacks for speech to text have been completed
making it possible for Asterisk to connect to a configured external
translator service and provide audio for STT. Results can also be
received from the external translator, and made available as speech
results in Asterisk.
Unit tests have also been created that test the AEAP framework, and
also the speech to text implementation.
ASTERISK-29726 #close
Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2
There was an issue with the conditional where STIR/SHAKEN would be
enabled even when not configured. It has been changed to ensure that if
a profile does not exist and stir_shaken is not set in pjsip.conf, then
the conditional will return from the function without performing
STIR/SHAKEN operations.
ASTERISK-30024
Change-Id: I41286a3d35b033ccbfbe4129427a62cb793a86e6