users expect them to work.
'core set debug' and 'core set verbose' can optionally change the
level for a specific filename; however, this is actually for a
specific source file name, not the module that source file is included
in. With examples like chan_sip, chan_iax2, chan_misdn and others
consisting of multiple source files, this will not lead to the
behavior that users expect. If they want to set the debug level for
chan_sip, they want it set for all of chan_sip, and not to have to
also set it for reqresp_parser and other files that comprise the
chan_sip module.
This patch changes this functionality to be module-name based instead
of file-name based.
To make this work, some Makefile modifications were required to ensure
that the AST_MODULE definition is present in each object file produced
for each module as well.
Review: https://reviewboard.asterisk.org/r/574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rework HAVE_PRI_SERVICE_MESSAGES to not use the active values directly
from the database. Database access is likely expensive. Database access
now only happens on initialization, destruction, and when the B channel is
taken in or out of service.
This change is not related to call waiting but it would cause the search
for a call waiting interface to be very expensive and slow down D channel
message servicing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Small patch changing skinny_set_rtp_peer to use transmit_stopmediatransmission and to use new transmit_startmediatransmission.
Basic testing on 30VIP's by wedhorn
Basic testing on 7960 by me
(closes issue #16956)
Reported by: wedhorn
Patches:
skinny-clean05b.diff uploaded by wedhorn (license 30)
Tested by: wedhorn,mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Broke the various functions included in transmit_callstate to their own functions. Transmit_callstate now just transmits callstate.
Generally left the functionality as it was, which highlight some minor code issues (eg multiple transmit_callstate's). I did however revise the hint code usage of the old transmit_callstate as it it not appropriate to put a device on hook based on the change of a hinted device.
(closes issue #16939)
Reported by: wedhorn
Patches:
skinny-clean04.diff uploaded by wedhorn (license 30)
Tested by: mvanbaak,wedhorn
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The first real test added to the external test suite found a pretty nasty crash
that occurred in Asterisk trunk. The crash was due to a race condition between
the REFER handling and channel destruction in the channel thread. After the
transfer has been completed, we go back to the transferrer channel and try to
lock it so we can fire off a CEL event. However, there was no guarantee that
the channel was still around at that point since it's racing against the channel
thread.
Since ast_channel is a reference counted object, the fix is simple. The code
unlocks the transferrer channel before finally completing the transfer with
an async goto. At this point the channel thread is going to start call tear
down and the channel will eventually be destroyed. To ensure that the channel
is valid when we want to fire off the CEL event, increase the channel's
reference count.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The get_local_address() function for an RTP instance was used when building an
SDP, but the results were not honored. The RTP engine activate() function was
not being used once we have determined that media will now flow.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Only chan_dahdi set a value in cdrflags. Everyone else just copied it
around the system. Noone cared about any value it may have contained.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250480 | jpeeler | 2010-03-03 13:04:11 -0600 (Wed, 03 Mar 2010) | 15 lines
Make sure to clear red alarm after polarity reversal.
From the issue:
The automatic overnight line tests (or manual ones) used on UK (BT) lines causes
a red alarm on a dahdi / TDM400P connected channel. This is because the line
uses voltage tests (battery loss) and polarity reversal. The polarity reversal
causes chan_dahdi to initiate v23 CallerID processing but during this the event
DAHDI_EVENT_NOALARM is ignored so that the alarm is never cleared.
(closes issue #14163)
Reported by: jedi98
Patches:
chan_dahdi-1.4-inalarm.diff uploaded by jedi98 (license 653)
Tested by: mattbrown, Chainsaw, mikeeccleston
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250394 | dvossel | 2010-03-03 12:02:27 -0600 (Wed, 03 Mar 2010) | 16 lines
fixes problem with duplicate TXREQ packets
When Asterisk receives an IAX2 TXREQ packet, try_transfer()
will call store_by_transfercallno() to link the chan_iax2_pvt
struct into iax_transfercallno_pvts. If a duplicate TXREQ
packet is received for the same call, the pvt struct will be
linked into iax_transfercallno_pvts multiple times. This patch
fixes this. Thanks rain for debugging this and providing a patch!
(closes issue #16904)
Reported by: rain
Patches:
iax2-double-txreq-fix.diff uploaded by rain (license 327)
Tested by: rain, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New config parameter "reportalarms" added in chan_dahdi.conf which supports the
following possible values:
"channels": report each channel alarms (current behavior, default for backward compatibility)
"spans": report an "SpanAlarm" event when the span of any configured channel is alarmed
"all": report channel and span alarms (aggregated behavior)
"none": do not report any alarms
(closes issue #16709)
Reported by: nahuelgreco
Patches:
chan_dahdi.c.reportalarms.patch uploaded by nahuelgreco (license 162)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch splits transmit_displaymessage into transmit_clear_display_message and transmit_display_message which better aligns with the skinny protocol. The new transmit_display_message is not used in the current code, but will be and so it is commented.
Moved handle_datetime from this function to onhook and offhook functions (display now properly cleared at the end of a call on 30VIP).
Removed skinny debug messages from inline code as there's an ast_verb in transmit_clear_display_message. Also, removed commentary that it was a clear display as it is now apparent from the function name.
Split transmit_displaypromptmessage into display and clear.
(closes issue #16878)
Reported by: wedhorn
Patches:
skinny-clean02.diff uploaded by wedhorn (license 30)
skinny-clean03.diff uploaded by wedhorn (license 30)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r249536 | jpeeler | 2010-03-01 11:02:03 -0600 (Mon, 01 Mar 2010) | 11 lines
Modify queued frames from local channels to not set the other side to up
In this case, attended transfers were broken due to ast_feature_request_and_dial
detecting the channel being set to up before the answer frame could be read and
therefore failing to mark the channel as ready. This fix is a regression fix for
244785, which should continue to work properly as well.
(closes issue #16816)
Reported by: jamhed
Tested by: jamhed, corruptor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Following Q.931 5.2.4
When the user has determined that sufficient call information has been received the
user shall stop T302 and send CALL PROCEEDING to the network.
Previously timeouts were possible if the dialplan took a long time to issue any
response back to the network.
Verified that our local TELCO also does the same.
(issue #16789)
Reported by: alecdavis
Patches:
overlap_receiving_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
change flags. Fixes a weird symbol problem mmichelson was having in a group branch,
but also applies to trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248667 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Uncommenting the REF_DEBUG definition where it was in the source
resulted in only a small part of the astobj2 references being logged
to a file. Moving this up higher in the include list causes all references
to be logged as they should be.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Break transmit_tone into transmit_start_tone and transmit_stop_tone as per the skinny protocol.
(closes issue #16874)
Reported by: wedhorn
Patches:
skinny-clean01.diff uploaded by wedhorn (license 30)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I'm working with this code right now trying to analyze a deadlock.
This change is just to clean up a few things before I make a more
complex patch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r247910 | rmudgett | 2010-02-19 11:18:49 -0600 (Fri, 19 Feb 2010) | 55 lines
Merged revision 247904 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.2-...
..........
r247904 | rmudgett | 2010-02-19 10:49:44 -0600 (Fri, 19 Feb 2010) | 49 lines
Make chan_misdn DTMF processing consistent with other channel technologies.
The processing of DTMF tones on the receiving side of an ISDN channel is
inconsistent with the way it is handled in other channels, especially
DAHDI analog. This causes DTMF tones sent from an ISDN phone to be
doubled at the connected party.
We are using the following 2 options of misdn.conf
1) astdtmf=yes
2) senddtmf=yes
Option one is necessary because the asterisk DSP DTMF detection is better
than mISDN's internal DSP. Not as many false positives.
Option two is necessary to transmit DTMF tones end to end when mISDN
channels are connected to SIP channels with out of band DTMF for example.
The symptom is that DTMF tones sent by an ISDN phone are doubled on the
way through asterisk when two mISDN channels are connected with a Local
channel in between or if it is bridged to an analog channel.
The doubling of DTMF tones is because DTMF is passed inband to asterisk by
the mISDN channel and passed out of band once again after the release of
the DTMF tone. Passing it inband is wrong. Neither an analog channel nor
SIP channel passes DTMF inband if configured to inband DTMF. Analog and
SIP channels filter out the DTMF tones because they use the voice frames
returned by ast_dsp_process. But chan_misdn passes the unfiltered input
voice frames instead.
To overcome one aspect of the problem, the doubling of DTMF tones when two
mISDN channels are directly bridged, someone made an 'optimization', where
in that case the DTMF tone passed out-of-band to the peer channel is not
translated to an inband tone at the transmit side. This optimization is
bad because it does not work in general. For example, analog channels or
mISDN channels when bridged through an intermediary local channel will
generate DTMF tones from out-of-band information. Also, of course, it
must not be done when there is no inband DTMF available.
This patch fixes the issue. Now chan_misdn will filter the received
inband DTMF signal the same as other channel types.
Another change included: No need to build an extra translation path
because ast_process_dsp does it if required.
Patches:
misdn-dtmf.patch
JIRA ABE-2080
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
NULL means the value is not specified for the column, which normally means
the driver uses whatever is the default value. However, on MySQL, placing
a NULL in either a float or integer column results in a retrieval of the 0
value. Hence, users get an errant error on load. This patch suppresses
that error and makes the value as if it was not there.
Note that this cannot be done in the realtime driver, because the lack of
difference between NULL and 0 can only be intepreted correctly by the
driver itself. If we did it in the realtime driver, then it would be
effectively impossible to set any realtime field to 0, because it would act
as if the field were unspecified and possibly take on a different value.
(closes issue #16683)
Reported by: wdoekes
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also includes a test for retrieving rtpqos parameters, including a NULL RTP
driver. Additionally, some further separation of the SIP internal API into
headers was necessary.
(closes issue #16652)
Reported by: kkm
Patches:
20100204__issue16652.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/501/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change builds upon the recent change to menuselect to add 'touch_on_change'
as an attribute of both categories and members. This should allow only the most
invasive defines to cause a complete rebuild, while defines which only affect a
subset of modules will only cause a rebuild of that smaller set.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ooops. Failed to note that we were inside a for loop and
pri_channel_bridge() needs to be executed only once.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Code Refactoring Changes
- read_to_parts() moved to reqresp_parser.c and has been renamed as
get_name_and_number()
- get_in_brackets() moved to reqresp_parser.c
- find_closing_quotes() added to sip_utils.h
Logic Changes
- get_name_and_number() now uses parse_uri() and get_calleridname()
for parsing. Before this change only names within quotes were
found, when names not within quotes are possible.
New Unit Tests
-sip_get_name_and_number_test
-sip_get_in_brackets_test
(closes issue #16707)
Reported by: Nick_Lewis
Patches:
issue16706.diff uploaded by dvossel (license 671)
Review: https://reviewboard.asterisk.org/r/499/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A patch was committed recently that converted duplicate uri parsing
code to use the parse_uri function. There were two instances where
this conversion did not mimic previous behavior exactly because the
port was not being parsed off the end of the domain. In order to do
this, a dummy pointer argument needs to be passed into parse_uri so
it will know it must parse out the port from the domain. If a port
output paramenter is not present, the domain is returned with the
port still attached.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously local channels channel state never changed. This became problematic
when the state of the other side of the local channel was lost, for example
during a masquerade. Changing the state of the local channel allows for the
scenario to be detected when the channel state is set to ringing, but the peer
isn't ringing. The specific problem scenario is described in 164201. Although
this was noted on one of the issues, here is the tested dialplan verified to
work:
exten => 9700,1,Dial(Local/*9700@default&Local/0009700@default)
exten => *9700,1,Set(GLOBAL(TESTCHAN)=${CHANNEL:0:${MATH(${LEN(${CHANNEL})}-1):0:2}}1)
exten => *9700,n,wait(3) ;3 works, 1 did not
exten => *9700,n,Dial(SIP/5001)
exten => 0009700,1,Wait(1) ;1 works, 3 did not
exten => 0009700,n,ChannelRedirect(${TESTCHAN},parkedcalls,701,1)
(closes issue #14992)
Reported by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r245792 | dvossel | 2010-02-09 16:55:38 -0600 (Tue, 09 Feb 2010) | 12 lines
Fixes iaxs and iaxsl size off by one issue.
2^15 = 32768 which is the maximum allowed iax2 callnumber.
Creating the iaxs and iaxsl array of size 32768 means the maximum
callnumber is actually out of bounds. This causes a nasty crash.
(closes issue #15997)
Reported by: exarv
Patches:
iax_fix.diff uploaded by dvossel (license 671)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They were previously passed correctly, but they simply weren't used. This
caused issues with various platforms whose builds needed to pass special
linker flags via the configure script.
(closes issue #16596)
Reported by: pprindeville
Patches:
asterisk-1.6-astldflags.patch uploaded by pprindeville (license 347)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245578 65c4cc65-6c06-0410-ace0-fbb531ad65f3