before we enter manage_parkinglot.
This will get rid of CLI warnings like:
__ast_read: Exception flag set on 'SIP/<NUMBER>-<ID>', but no exception handler
(closes issue #12748)
Reported by: nreinartz
Patches:
asterisk-multiparking_initialize_filedescr_sets-0.0.1.patch uploaded by nreinartz (license 452)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118858 | murf | 2008-05-28 18:25:28 -0600 (Wed, 28 May 2008) | 46 lines
(closes issue #10668)
(closes issue #11721)
(closes issue #12726)
Reported by: arkadia
Tested by: murf
These changes:
1. revert the changes made via bug 10668;
I should have known that such changes,
even tho they made sense at the time,
seemed like an omission, etc, were actually
integral to the CDR system via forkCDR.
It makes sense to me now that forkCDR didn't
natively end any CDR's, but rather depended
on natively closing them all at hangup time
via traversing and closing them all, whether
locked or not. I still don't completely
understand the benefits of setvar and answer
operating on locked cdrs, but I've seen
enough to revert those changes also, and
stop messing up users who depended on that
behavior. bug 12726 found reverting the changes
fixed his changes, and after a long review
and working on forkCDR, I can see why.
2. Apply the suggested enhancements proposed
in 10668, but in a completely compatible
way. ForkCDR will behave exactly as before,
but now has new options that will allow some
actions to be taken that will slightly
modify the outcome and side-effects of
forkCDR. Based on conversations I've had
with various people, these small tweaks
will allow some users to get the behavior
they need. For instance, users executing
forkCDR in an AGI script will find the
answer time set, and DISPOSITION set,
a situation not covered when the routines
were first written.
3. A small problem in the cdr serializer
would output answer and end times even
when they were not set. This is now
fixed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118551 | tilghman | 2008-05-27 14:15:27 -0500 (Tue, 27 May 2008) | 6 lines
When showing an error message for a command, don't shorten the command output,
as it tends to confuse the user (it's fine for suggesting other commands,
however).
Reported by: seanbright (on #asterisk-dev)
Fixed by: me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118465 | tilghman | 2008-05-27 13:58:09 -0500 (Tue, 27 May 2008) | 8 lines
NULL character should terminate only commands back to the core, not log
messages to the console.
(closes issue #12731)
Reported by: seanbright
Patches:
20080527__bug12731.diff.txt uploaded by Corydon76 (license 14)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a deadlock is detected, then the typical lock information will be
printed along with a backtrace of the stack for the offending threads.
Use of this requires compiling with DETECT_DEADLOCKS and having glibc
installed.
Furthermore, issuing the "core show locks" CLI command will print the
normal lock information as well as a backtraces for each lock. This
requires that DEBUG_THREADS is enabled and that glibc is installed.
All the backtrace features may be disabled by running the configure
script with --without-execinfo as an argument
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
display this information in the "core show settings" CLI command. This is
useful if you want to verify that you're running a build with DONT_OPTIMIZE,
DEBUG_THREADS, etc.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Until this change, all verbose messages in Asterisk's log files reported logger.c
as the source of the message.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a configuration file. As it was, only the first did so. This led to
a problem if the included file was changed (but not the configuration
file which includes it) and the second source file attempted to reload
the configuration. It would not see that the included file had changed.
In this particular example, res_phoneprov and chan_sip both loaded
sip.conf, which included a file call sip.peers.conf. Since res_phoneprov
was the first to load sip.conf, only it cached the fact that sip.conf
included sip.peers.conf. If sip.peers.conf were changed and sip.conf were
not and a sip reload were issued (meaning that chan_sip attempts to
reload sip.conf only if it and its included files have changed) the changes
made to sip.peers.conf would not be seen and therefore no action would be
taken.
(closes issue #12693)
Reported by: marsosa
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
last match, and possibly skip empty fields. The function is useful
(and used here) when a form submits multiple 'Action' fields to the
Manager.
This change slightly modifies the current behaviour, but only in the
case the user supplies multiple 'Action: ' lines and the first
ones are empty, so the change is totally harmless.
+ Fix style on a couple of "if (displayconnects)" statements;
+ Expand a bit the 'Manager Test' interface, to make it slightly
more user friendly. But also comment that the HTML should not
be embedded in the C source.
None of this stuff needs to be applied to 1.4.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
same name in http queries, which might confuse the manager.
Replace calls to ast_uri_decode() with a local function that also
replaces '+' with ' ', as this is the normal encoding for
spaces in http requests.
This allows passing cli commands to the manager through the
http interface.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of platform/compiler-dependent warnings when handing
struct timeval fields, both reading and printing them.
It is a lost battle to handle the different ways struct timeval
is handled on the various platforms and compilers, so try
to be pragmatic and go through int/long which are universally
supported.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116088 | mmichelson | 2008-05-13 18:47:49 -0500 (Tue, 13 May 2008) | 12 lines
A change to the way channel locks are handled when DEBUG_CHANNEL_LOCKS is defined.
After debugging a deadlock, it was noticed that when DEBUG_CHANNEL_LOCKS
is enabled in menuselect, the actual origin of channel locks is obscured
by the fact that all channel locks appear to happen in the function
ast_channel_lock(). This code change redefines ast_channel_lock to be a
macro which maps to __ast_channel_lock(), which then relays the proper
file name, line number, and function name information to the core lock
functions so that this information will be displayed in the case that
there is some sort of locking error or core show locks is issued.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115990 | russell | 2008-05-13 16:05:57 -0500 (Tue, 13 May 2008) | 5 lines
Fix an issue that I noticed in autoservice while mmichelson and I were debugging
a different problem. I noticed that it was theoretically possible for two threads
to attempt to start the autoservice thread at the same time. This change makes the
process of starting the autoservice thread, thread-safe.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115735 | mmichelson | 2008-05-12 12:51:14 -0500 (Mon, 12 May 2008) | 7 lines
If a thread holds no locks, do not print any information on the thread when issuing
a core show locks command. This will help to de-clutter output somewhat.
Russell said it would be fine to place this improvement in the 1.4 branch, so that's
why it's going here too.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115737 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
new paramater. The new options for ENUM* functions include 'u', 's', 'i', and 'd' which return the full uri, trigger isn specific rewriting, look
for branches into an infrastructure enum tree, or do a direct dns lookup of a number respectively. The new paramater for TXCIDNAME adds a
zone-suffix argument for looking up caller id's in DNS that aren't e164.arpa.
This patch is based on the original code from otmar, modified by snuffy, and tested by jtodd, me, and others.
(closes issue #8089)
Reported by: otmar
Patches:
20080508_bug8089-1.diff
- original code by otmar (license 480),
- revised by snuffy (license 35)
Tested by: oej, otmar, jtodd, Corydon76, snuffy, alexnikolov, bbryant
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to use doubly linked lists. The schedule() function had an optimization that
had it try to guess which direction would be better for the traversal to insert
the task into the scheduler queue. However, if the code chose the path where
it traversed the queue in reverse, and the result was that the task should be
at the head of the queue, then the code would actually put it at the tail,
instead.
(Problem found by bbryant, debugged and fixed by bbryant and me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
being #included twice. This was due to the fact that #exec created a temporary file which
was then #included. The name of the temporary file was the name of the #exec'd file, with
the Unix timestamp and thread ID concatenated. The issue was that if multiple #exec statements
of the same file were reached in the same second, then the result was that the temporary files
would have duplicate names. To resolve this, the temporary file now has microsecond resolution
for the timestamp portion.
(closes issue #12574)
Reported by: jmls
Patches:
12574.patch uploaded by putnopvut (license 60)
Tested by: jmls, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A task wraps a callback function pointer and a data pointer and is managed internal to the taskprocessor subsystem. The callback function is responsible for releasing task data.
Taskprocessor API
* ast_taskprocessor_get(..) - returns a reference to a taskprocessor
* ast_taskprocessor_unreference(..) - releases reference to a taskprocessor
* ast_taskprocessor_push(..) - push a task into a taskprocessor queue
Check doxygen for more details
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Brett Bryant
Steve Murphy
Michiel van Baak
Tilghman Lesher
Jeff Peeler
Mark Michelson
Russell Bryant
Luigi Rizzo
Joshua Colp
Olle Johansson
Dwayne M. Hubbard