This change adds the same variable functionality that
is available for originating a channel to the create
call. Now when creating a channel you can specify
dialplan variables to set instead of having to do another
API call.
ASTERISK-28896
Change-Id: If13997ba818136d7c070585504fc4164378aa992
This commit adds support for
[AudioSocket](
https://wiki.asterisk.org/wiki/display/AST/AudioSocket),
a very simple bidirectional audio streaming protocol. There are both
channel and application interfaces.
A description of the protocol can be found on the above referenced
GitHub page. A short talk about the reasons and implementation can be
found on [YouTube](https://www.youtube.com/watch?v=tjduXbZZEgI), from
CommCon 2019.
ARI support has also been added via the existing "externalMedia" ARI
functionality. The UUID is specified using the arbitrary "data" field.
ASTERISK-28484 #close
Change-Id: Ie866e6c4fa13178ec76f2a6971ad3590a3a588b5
The Channel resource has a new sub-resource "externalMedia".
This allows an application to create a channel for the sole purpose
of exchanging media with an external server. Once created, this
channel could be placed into a bridge with existing channels to
allow the external server to inject audio into the bridge or
receive audio from the bridge.
See https://wiki.asterisk.org/wiki/display/AST/External+Media+and+ARI
for more information.
Change-Id: I9618899198880b4c650354581b50c0401b58bc46
Currently, DELETE /ari/channels/<channelID> supports only few hangup reasons.
It's good enough for simple use, but when it needs to set the detail reason,
it comes challenges.
Added reason_code query parameter for that.
ASTERISK-28385
Change-Id: I1cf1d991ffd759d0591b347445a55f416ddc3ff2
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
Added the ability to move between Stasis applications within Stasis.
This can be done by calling 'move' in an application, providing (at
minimum) the channel's id and the application to switch to. If the
application is not registered or active, nothing will happen and the
channel will remain in the current application, and an event will be
triggered to let the application know that the move failed. The event
name is "ApplicationMoveFailed", and provides the "destination" that the
channel was attempting to move to, as well as the usual channel
information. Optionally, a list of arguments can be passed to the
function call for the receiving application. A full example of a 'move'
call would look like this:
client.channels.move(channelId, app, appArgs)
The control object used to control the channel in Stasis can now switch
which application it belongs to, rather than belonging to one Stasis
application for its lifetime. This allows us to use the same control
object instead of having to tear down the current one and create
another.
ASTERISK-28267 #close
Change-Id: I43d12b10045a98a8d42541889b85695be26f288a
The periodic doc job does a make ari-stubs and checks that
there are no changes before generating the docs. Since I changed
the mustache template (and the generated code directly) recently
and forgot to regenerate the stubs, the doc job thinks they're out
of date.
Change-Id: I94b97035311eccf52b0101b8590223265a7881d4
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
Many ARI applications will want to play multiple media files in a row to
a resource. The most common use case is when building long-ish IVR prompts
made up of multiple, smaller sound files. Today, that requires building a
small state machine, listening for each PlaybackFinished event, and triggering
the next sound file to play. While not especially challenging, it is tedious
work. Since requiring developers to write tedious code to do normal activities
stinks, this patch adds the ability to play back a list of media files to a
resource.
Each of the 'play' operations on supported resources (channels and bridges)
now accepts a comma delineated list of media URIs to play. A single Playback
resource is created as a handle to the entire list. The operation of playing
a list is identical to playing a single media URI, save that a new event,
PlaybackContinuing, is raised instead of a PlaybackFinished for each non-final
media URI. When the entire list is finished being played, a PlaybackFinished
event is raised.
In order to help inform applications where they are in the list playback, the
Playback resource now includes a new, optional attribute, 'next_media_uri',
that contains the next URI in the list to be played.
It's important to note the following:
- If an offset is provided to the 'play' operations, it only applies to the
first media URI, as it would be weird to skip n seconds forward in every
media resource.
- Operations that control the position of the media only affect the current
media being played. For example, once a media resource in the list
completes, a 'reverse' operation on a subsequent media resource will not
start a previously completed media resource at the appropiate offset.
- This patch does not add any new operations to control the list. Hopefully,
user feedback and/or future patches would add that if people want it.
ASTERISK-26022 #close
Change-Id: Ie1ea5356573447b8f51f2e7964915ea01792f16f
This adds a new ARI method that allows for you to dial a channel that
you previously created in ARI.
By combining this with the create method for channels, it allows for a
workflow where a channel can be created, manipulated, and then dialed.
The channel is under control of the ARI application during all stages of
the Dial and can even be manipulated based on channel state changes
observed within an ARI application.
The overarching goal for this is to eventually be able to add a dialed
channel to a Stasis bridge earlier than the "Up" state. However, at the
moment more work is needed in the Dial and Bridge APIs in order to
facilitate that.
ASTERISK-25889 #close
Change-Id: Ic6c399c791e66c4aa52454222fe4f8b02483a205
This adds a new ARI method to the channels resource that allows for the
creation of a new channel. The channel is created and then placed into
the specified Stasis application.
This is different from the existing originate method that creates a
channel, dials it, and then places the answered channel into the
dialplan or a Stasis application. This method does not attempt to call
the channel at all. Dialing is left as a later step after channel
creation. This allows for pre-dialing channel manipulation if desired.
ASTERISK-25889
Change-Id: I3c96a0aba914b08e39f6256371a5bd4c92cbded8
This patch adds a new feature to ARI to redirect a channel to another server,
and fixes a few bugs in PJSIP's handling of the Transfer dialplan
application/ARI redirect capability.
*New Feature*
A new operation has been added to the ARI channels resource, redirect. With
this, a channel in a Stasis application can be redirected to another endpoint
of the same underlying channel technology.
*Bug fixes*
In the process of writing this new feature, two bugs were fixed in the PJSIP
stack:
(1) The existing .transfer channel callback had the limitation that it could
only transfer channels to a SIP URI, i.e., you had to pass
'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is
still supported, it is somewhat unintuitive - particularly in a world full
of endpoints. As such, we now also support specifying the PJSIP endpoint to
transfer to.
(2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by
updating its Contact header. Alas, that resulted in the forwarding
destination set by the dialplan application/ARI resource/whatever being
rewritten with very incorrect information. Hence, we now don't bother
updating an outgoing response if it is a 302. Since this took a looong time
to find, some additional debug statements have been added to those modules
that update the Contact headers.
Review: https://reviewboard.asterisk.org/r/4316/
ASTERISK-24015 #close
Reported by: Private Name
ASTERISK-24703 #close
Reported by: Matt Jordan
........
Merged revisions 431717 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the documentation of ARI on the wiki. Specifically, it
addresses the following:
* Allowed values and allowed ranges weren't documented. This was particularly
frustrating, as Asterisk would reject query parameters with disallowed values
- but we didn't tell anyone what the allowed values were.
* The /play/id operation on /channels and /bridges failed to document all of
the added media resource types.
* Documentation for creating a channel into a Stasis application failed to
note when it occurred, and that creating a channel into Stasis conflicts with
creating a channel into the dialplan.
* Some other minor tweaks in the mustache templates, including italicizing the
parameter type, putting the default value on its own sub-bullet, and some
other nicities.
Review: https://reviewboard.asterisk.org/r/4351
........
Merged revisions 431145 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this patch, the following two ARI commands
POST /channels
POST /channels/{id}/continue
Accept a new parameter, label, that can be used to continue to or originate
to a priority label in the dialplan.
Because this is adding a new parameter to ARI commands, the API version of
ARI has been bumped from 1.6.0 to 1.7.0.
This patch comes courtesy of Nir Simionovich from Greenfield Tech. Thanks!
ASTERISK-24412 #close
Reported by Nir Simionovich
Review: https://reviewboard.asterisk.org/r/4285
........
Merged revisions 430337 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The variables body parameter under the originate and originate with id
operations of the channel resource showed invalid JSON in its description.
The variables body parameter under the userEvent operation of the event
resource made no mention that the custom key/value pairs should be wrapped
in a variables key in order to be added to the custom user event.
ASTERISK-23975 #close
Review: https://reviewboard.asterisk.org/r/3692/
........
Merged revisions 417878 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a tones URI type to the playback resource. The tone can be specified by
name (from indications.conf) or by a tone pattern. In addition, tonezone can
be specified in the URI (by appending ;tonezone=<zone>). Tones must be
stopped manually in order for a stasis control to move on from playback of
the tone. Tones may be paused, resumed, restarted, and stopped. They may
not be rewound or fast forwarded (tones can't be controlled in a way that
lets you skip around from note to note and pausing and resuming will also
restart the tone from the beginning). Tests are currently in development
for this feature (https://reviewboard.asterisk.org/r/3428/).
(closes issue ASTERISK-23433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3427/
........
Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds back in support for specifying channel variables during an
originate without compromising the ability to specify query parameters
in the JSON body. This was accomplished by generating the body-parsing
code in a separate function instead of being integrated with the URI
query parameter parsing code such that it could be called by paths with
body parameters. This is transparent to the user of the API and
prevents manual duplication of code or data structures.
(closes issue ASTERISK-23051)
Review: https://reviewboard.asterisk.org/r/3122/
Reported by: Matt Jordan
........
Merged revisions 406003 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we added support for specifying channel variables for an
origination, we didn't consider how that would interact with another
feature, namely specifying request parameters in a JSON request body.
The method of specifying channel variables (as a flat JSON object passed
in the JSON body) interferes with parsing parameters out of the request
body.
Unfortunately, fixing this would be a backward incompatible change. In
the interest of keeping the API sane and keeping our release schedule,
we're dropping the feature for specifying channel variables in the
origination request.
We will bring the feature back soon, as a backward compatible addition
to the API.
(closes issue ASTERISK-23051)
Review: https://reviewboard.asterisk.org/r/3088
........
Merged revisions 404509 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404512 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to specify channel variables when creating/originating a
channel in ARI. The variables are sent in the body of the request and should
be formatted as a single level JSON object. No nested objects allowed.
For example: {"variable1": "foo", "variable2": "bar"}.
(closes issue ASTERISK-22872)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3052/
........
Merged revisions 403752 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While working on building client libraries from the Swagger API, I
noticed a problem with the nicknames.
channel.deleteChannel()
channel.answerChannel()
channel.muteChannel()
Etc. We put the object name in the nickname (since we were generating C
code), but it makes OO generators redundant.
This patch makes the nicknames more OO friendly. This resulted in a lot
of name changing within the res_ari_*.so modules, but not much else.
There were a couple of other fixed I made in the process.
* When reversible operations (POST /hold, POST /unhold) were made more
RESTful (POST /hold, DELETE /unhold), the path for the second operation
was left in the API declaration. This worked, but really the two
operations should have been on the same API.
* The POST /unmute operation had still not been REST-ified.
Review: https://reviewboard.asterisk.org/r/2940/
........
Merged revisions 402528 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ring operation sends ringing to the specified channel it is invoked on.
The dtmf operation can be used to send DTMF digits to the specified channel
of a specific length with a wait time in between. Finally hangup reasons
allow you to specify why a channel is being hung up (busy, congestion).
Early media behavior has also been tweaked slightly. When playing media to a channel
it will no longer automatically answer. If it has not been answered a progress indication
is sent instead.
(closes issue ASTERISK-22701)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2916/
........
Merged revisions 402358 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it clear that the ARI API calls for listing channels and
bridges will list all channels or bridges in the system and not just
those that are in or are controlled by a Stasis application.
(closes issue ASTERISK-22635)
Reported by: Kevin Harwell
........
Merged revisions 401087 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This renames all files and API calls from several variants of
Stasis-HTTP to ARI including:
* Stasis-HTTP -> ARI
* STASIS_HTTP -> ARI
* stasis_http -> ari (ast_ari for global symbols, file names as well)
* stasis http -> ARI
Review: https://reviewboard.asterisk.org/r/2706/
(closes issue ASTERISK-22136)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-07-27 23:11:02 +00:00
Renamed from res/stasis_http/resource_channels.h (Browse further)
