https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90735 | mmichelson | 2007-12-03 17:12:17 -0600 (Mon, 03 Dec 2007) | 22 lines
A big one...
This is the merge of the forward-loop branch. The main change here is that call-forwards can no longer loop.
This is accomplished by creating a datastore on the calling channel which has a linked list of all devices
dialed. If a forward happens, then the local channel which is created inherits the datastore. If, through this
progression of forwards and datastore inheritance, a device is attempted to be dialed a second time, it will simply
be skipped and a warning message will be printed to the CLI. After the dialing has been completed, the datastore
is detached from the channel and destroyed.
This change also introduces some side effects to the code which I shall enumerate here:
1. Datastore inheritance has been backported from trunk into 1.4
2. A large chunk of code has been removed from app_dial. This chunk is the section of code
which handles the call forward case after the channel has been requested but before it has
been called. This was removed because call-forwarding still works fine without it, it makes the
code less error-prone should it need changing, and it made this set of changes much less painful
to just have the forwarding handled in one place in each module.
3. Two new files, global_datastores.h and .c have been added. These are necessary since the datastore
which is attached to the channel may be created and attached in either app_dial or app_queue, so they
need a common place to find the datastore info. This approach was taken in case similar datastores are
needed in the future, there will be a common place to add them.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90432 | tilghman | 2007-12-02 03:34:23 -0600 (Sun, 02 Dec 2007) | 7 lines
Clarify the return value on autoservice. Specifically, if you started
autoservice and autoservice was already on, it would erroneously return an
error.
Reported by: adiemus
Patch by: dimas
(Closes issue #11433)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90348 | russell | 2007-11-30 13:26:04 -0600 (Fri, 30 Nov 2007) | 8 lines
Change the behavior of ao2_link(). Previously, in inherited a reference.
Now, it automatically increases the reference count to reflect the reference
that is now held by the container.
This was done to be more consistent with ao2_unlink(), which automatically
releases the reference held by the container. It also makes it so it is
no longer possible for a pointer to be invalid after ao2_link() returns.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90145 | russell | 2007-11-28 18:20:34 -0600 (Wed, 28 Nov 2007) | 5 lines
This set of changes is to make some callerID handling thread-safe.
The ast_set_callerid() function needed to lock the channel. Also, the handlers
for the CALLERID() dialplan function needed to lock the channel when reading
or writing callerid values directly on the channel structure.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90059 | mmichelson | 2007-11-28 16:08:50 -0600 (Wed, 28 Nov 2007) | 13 lines
Removing some seemingly pointless code. This sets a channel variable for every priority
executed in the dialplan if you have debug set to anything non-zero. This seems pointless
due to the fact that these channel variables are not referenced anywhere else in the code and
their names are esoteric enough that they would not be practical to reference in the dialplan. Plus
the fact that this behavior isn't documented anywhere means that the change is not likely to cause
any disruption. If anything, this may actually cause a slight performance increase if running with
debug on.
The motivating influence for this code change is the eventwhencalled option for queues. If set to
vars, all channel variables will be output to the manager. These unnecessary channel variables make
the output a lot more difficult to deal with.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89893 | russell | 2007-11-27 18:20:13 -0600 (Tue, 27 Nov 2007) | 4 lines
- update documentation for some of the goto functions to note that they
handle locking the channel as needed
- update ast_explicit_goto() to lock the channel as needed
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89790 | russell | 2007-11-27 15:45:51 -0600 (Tue, 27 Nov 2007) | 41 lines
Merge changes from team/russell/autoservice_1.4
This set of changes fixes an issue that was reported to me on IRC yesterday.
The user, d1mas, was using chan_zap for incoming calls and was having DTMF
recognition issues in some situations. Specifically, he noticed that the
problem occurred when using DISA or WaitExten. He also noticed that when
using Read, the problem did not occur. His system also used DUNDi for
dialplan lookups.
So, he theorized that if the DUNDi lookups blocked for some period of time,
that audio from the zap channel could get lost. If the audio got lost, then
it wouldn't be run through the DTMF detector, and digits could get lost.
He was correct, and the following set of changes fixes the problem. However,
the changes go a little bit further than what was necessary to fix this exact
problem.
1) I updated pbx_extension_helper() to autoservice the associated channel to
handle cases where extension lookups may take a long time. This would
normally be a dialplan switch that does some lookup over the network, such
as the DUNDi or IAX2 switches.
This ensures that even while a DUNDi lookup is blocking, the channel will be
continuously serviced.
2) I made a change to the autoservice code. This is actually something that
has bothered me for a long time. When a channel is in autoservice, _all_
frames get thrown away. However, some frames really shouldn't be thrown
away. The most notable examples are signalling (CONTROL) frames, and DTMF.
So, this patch queues up important frames while a channel is in autoservice.
When autoservice is stopped on the channel, the queued up frames get stuck
back on the channel so that they can get processed instead of thrown away.
3) I made another change to the autoservice code to handle the case where
autoservice is started on channels recursively.
Previously, you could call ast_autoservice_start() multiple times on a
channel, and it would stop the first time ast_autoservice_stop() gets
called. Now, it will ensure that autoservice doesn't actually stop until
the final call to ast_autoservice_stop().
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89709 | kpfleming | 2007-11-27 14:16:56 -0600 (Tue, 27 Nov 2007) | 2 lines
on second thought... revert all the other changes i've made in app options parsing leaving only one: if an empty argument is supplied for an option, set that argument pointer to point to an empty string rather than NULL, so that the application can do normal checks on it without worrying about it being NULL
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also by accident fixed a bad typo by a previous committer, which actually made video calls
not work fully...
Merged revisions 89630 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89630 | oej | 2007-11-27 16:23:17 +0100 (Tis, 27 Nov 2007) | 12 lines
If we get a codec offer using a well-known payload type, but using it for another
codec that we don't know, Asterisk did not remove that codec from the list.
With this patch, we remove the codec from audio and video rtp objects and
deny it ever existed. Thanks to lasse for testing.
(closes issue #11376)
Reported by: lasse
Patches:
bug11376.txt uploaded by oej (license 306)
Tested by: lasse
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89622 | murf | 2007-11-26 23:24:02 -0700 (Mon, 26 Nov 2007) | 1 line
closes issue #11379; OK, this is an attempt to make both sides happy. To the cdr.conf file, I added the option 'unanswered', which defaults to 'no'. In this mode, you will see a cdr for a call, whether it was answered or not. The disposition will be NO ANSWER or ANSWERED, as appropriate. The src is as you'd expect, the destination channel will be one of the channels from the Dial() call, usually the last in the list if more than one chan was specified. With unanswered set to 'yes', you will still see this cdr entry in both cases. But in the case where the dial timed out, you will also see a cdr for each line attempted, marked NO ANSWER, with no destination channel name. The new option defaults to 'no', so you don't see the pesky extra cdr's by default, and you will not see the irritating 'not posted' messages.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89610 | file | 2007-11-26 17:10:29 -0400 (Mon, 26 Nov 2007) | 2 lines
Fix issues with async dialing with an application executing. The application has to be terminated and control returned to the thread before hanging things up. (issue #BE-252)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Restructure other changes to UPGRADE.txt and CHANGES
We're still looking for scripts that replace
asterisk -rx "show shannels concise"
by using the manager interface, but still produces the same output.
Anyone?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89577 | file | 2007-11-26 11:34:38 -0400 (Mon, 26 Nov 2007) | 6 lines
If channel allocation fails because the alert pipe could not be created also free the scheduler context.
(closes issue #11355)
Reported by: eliel
Patches:
main.channel.c.patch uploaded by eliel (license 64)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89540 | tilghman | 2007-11-24 00:19:23 -0600 (Sat, 24 Nov 2007) | 9 lines
Currently, zero-length voicemail messages cause a hangup in VoicemailMain.
This change fixes the problem, with a multi-faceted approach. First, we
do our best to avoid these messages from being created in the first place,
and second, if that fails, we detect when the voicemail message is
zero-length and avoid exiting at that point.
Reported by: dtyoo
Patch by: gkloepfer,tilghman
(Closes issue #11083)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89536 | tilghman | 2007-11-23 11:18:26 -0600 (Fri, 23 Nov 2007) | 10 lines
Up until this point, the XML output of the manager has been technically
invalid, due to the repetition of certain parameters in a single event.
This caused various issues for XML parsers, some of which refused to parse
at all, given the invalidity of the rendered XML. So this commit fixes
the XML output, ensuring that each entity parameter has a unique name, thus
ensuring valid XML.
Reported by: msetim
Patch by: tilghman
(Closes issue #10220)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89537 65c4cc65-6c06-0410-ace0-fbb531ad65f3