This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
Attempting to dial PJSIP/endpoint when the endpoint doesn't exist and
disable_multi_domain=no results in a misleading empty endpoint name
message. The message should say the endpoint was not found.
* Added missing endpoint not found message.
* Added more information to the empty endpoint name msgs if available.
* Eliminated RAII_VAR in request().
Change-Id: I21da85ebd62dcc32115b2ffcb5157416ebae51e4
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
Some endpoints do not like a stream being reused for a new
media stream. The frame/jitterbuffer can rely on underlying
attributes of the media stream in order to order the packets.
When a new stream takes its place without any notice the
buffer can get confused and the media ends up getting dropped.
This change uses the SSRC change to determine that a new source
is reusing an existing stream and then bridge_softmix renegotiates
each participant such that they see a new media stream. This
causes the frame/jitterbuffer to start fresh and work as expected.
ASTERISK-27277
Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07
chan_pjsip_indicate was missing a case for the recently added
AST_CONTROL_STREAM_TOPOLOGY_CHANGED condition and was returning an
error and causing the call to be hung up instead of just ignoring
it.
ASTERISK-27260
Reported by: Daniel Heckl
Change-Id: I4fecbb00a0b8a853da85155065c1a6bddf235e80
When rtp_keepalive is on for a PJSIP endpoint dialing to another
Asterisk instance also using PJSIP, Asterisk will continue to print
warning messages about not being able to send frames of a certain
type. This suppresses that warning message.
Change-Id: I0332a05519d7bda9cacfa26d433909ff1909be67
Introduce a new property to rtp-engine to make it aware of
the desire for assymetric codecs or not. If asymmetric codecs
is not allowed, the bridge will compare read/write formats
and shut down the p2p bridge if needed
ASTERISK-26745 #close
Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f
This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
PJSIP call to be modified on a per-call basis
ASTERISK-27085 #close
Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
ASTERISK-27118
Change-Id: I96c0920b9f9aca7382256484765a239017973c11
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
The chan_pjsip module uses a calculation approach for
determining device state. This means that in situations
where we would expect device state to change we need to
tell the core to query. A scenario that was missed is
when early media was signaled.
This change adds the notification for the core to
query device state when we are told that early media
is being provided.
ASTERISK-27039
Change-Id: Iafebfd152894966344ff2e950a3cee9f59a3eb6f
PJSIP support in Asterisk differs from chan_sip in that it
allows media to be sent as-is without transcoding provided
the codecs were negotiated in the SDP. This is allowed
according to the RFC. Support for this differs quite a lot
though and some endpoints do not handle it well.
This change extends the 'asymmetric_rtp_codec' option to
also cover this case. When set to no (the default) the code
behaves as chan_sip does - the best codec is selected and
we will only ever send that, unless we change what we are
sending if the remote side changes. When set to yes we
will send media as-is without transcoding if the codec
has been negotiated in the SDP.
ASTERISK-26996
Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51
If you use ast_request to create a PJSIP channel but then hang it
up without causing a transaction to be sent, the session will
never be destroyed. This is due ot the fact that it's pjproject
that triggers the session cleanup when the transaction ends.
app_chanisavail was doing this to get more granular channel state
and it's also possible for this to happen via ARI.
* ast_sip_session_terminate was modified to explicitly call the
cleanup tasks and unreference session if the invite state is NULL
AND invite_tsx is NULL (meaning we never sent a transaction).
* chan_pjsip/hangup was modified to bump session before it calls
ast_sip_session_terminate to insure that session stays valid
while it does its own cleanup.
* Added test events to session_destructor for a future testsuite
test.
ASTERISK-26908 #close
Reported-by: Richard Mudgett
Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
When PJSIP tries to call an endpoint with a domain (e.g. 1000@test.com),
the user part is stripped down as it would be a trunk with a specified user,
and only the host part is called as a PJSIP endpoint and can't be found.
This is not correct in the case of a multidomain SIP account, so the stripping
after the @ sign is done only if the whole endpoint (in multidomain case
1000@test.com) can't be found.
ASTERISK-26248
Change-Id: I3a2dd6f57f3bd042df46b961eccd81d31ab202e6
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
On heavy loaded system the TCP/TLS incoming calls could be
disconnected by pjproject while these calls are being
processed by asterisk.
This patch uses functions pjsip_inv_add_ref/pjsip_inv_dec_ref
to inform pjproject that an INVITE session is in use.
ASTERISK-26482 #close
Change-Id: Ia2e3e2f75358cdb530252a9ce158af3d5d9fdf33
HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered.
This patch change the call order of ast_queue_control_data
and ast_queue_control in chan_pjsip_incoming_response.
ASTERISK-26396 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Ide2d31723d8d425961e985de7de625694580be61
This patch adds a new PJSIP specific dialplan function,
PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media
session will be refreshed via either an UPDATE or re-INVITE request.
When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function,
the formats in use on a PJSIP channel can be re-negotiated and changed
dynamically after call setup.
ASTERISK-26277 #close
Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b
(cherry picked from commit eec60dd773)
The chan_pjsip_cng_tone_detected() has the potential to deadlock if an
incoming fax happens during the Playback or similar application.
* Fixed the potential deadlock by not calling ast_async_goto() with the
channel lock held.
* Made always eat the fax detection frame whether there is a fax extension
or not.
ASTERISK-26216
Reported by: Richard Mudgett
Change-Id: I32aecbb4818af646dc5a619f0dc040e9b1f222e5
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
pjsip_inv_end_session() is documented as being able to return the
passed in tdata parameter set to NULL on success.
Change-Id: I09d53725c49b7183c41bfa1be3ff225f3a8d3047
bridge_native_rtp can call into an RTP-capable channel driver in order
for the driver to update information about who the channel is
communicating with. For SIP channel drivers, this means deactivating
RTCP and sending a reinvite so that the endpoints can communicate
directly.
bridge_native_rtp does the right thing and has the channel locked when
calling into the channel driver. chan_pjsip can't alter session
properties in this thread, though. chan_pjsip queues a task on the
session serializer in order to update properties there.
The problem is that this queued task was not locking the channel. This
meant that the queued task could attempt to deactivate RTCP at the same
time that the channel thread was attempting to process an incoming RTCP
packet. This could lead to a crash.
This patch fixes the issue by locking the channel in the queued task
when altering RTP properties.
ASTERISK-26092 #close
Reported by Niklas Larsson
Change-Id: I3464e226a3c41f6b915f97891e07fa1599e2a159
Added the ability to show channel statistics to chan_pjsip (cli_functions.c)
Moved the existing 'pjsip show channel(s)' functionality from
pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's
private header so it made sense to move the existing channel commands as well.
Now using stasis_cache_dump to get the channel snapshots rather than retrieving
all endpoints, then getting each one's channel snapshots. Much more efficient.
Change-Id: I03b114522126d27434030b285bf6d531ddd79869
During a transfer involving direct media a race occurs between when the
transferer channel is swapped out, initiating rtp changes/updates, and the
subsequent reinvites.
When Alice, after speaking with Charlie (Bob is on hold), connects Bob and
Charlie invites are sent to each in order to establish the call between them.
Bob is taken off hold and Charlie is told to have his media flow through
Asterisk. However, if before those invites go out the bridge updates Bob's
and/or Charlie's rtp information with direct media data (i.e. address, port)
then the invite(s) will contain the remote data in the SDP instead of the
Asterisk data.
The race occurs in the native bridge glue code when updating the peer. The
direct_media_address can get set twice before sending out the first invite
during call connection. This can happen because the checking/setting of the
direct_media_address happened in one thread while the sending of the invite(s)
happened in another thread.
This fix removes the race condition by moving the checking/setting of the
direct_media_address to be in the same thread as the sending of the invites(s).
This serializes the checking/setting and sending so they can no longer happen
out of order.
ASTERISK-25849 #close
Change-Id: Idfea590175e74f401929a601dba0c91ca1a7f873
When a channel is in a direct media bridge, a re-INVITE may arrive that forces
Asterisk to re-negotiate the media to a T.38 fax. When this occurs, the bridge
must change its technology to a simple bridge, and re-INVITE the media back
to Asterisk.
Generally, this logic mostly already exists in Asterisk. However, prior to this
patch, there were a few bugs:
(1) The T.38 framehook currently prevents a channel capable of T.38 faxes from
ever entering into a direct media bridge. This applies even when the only
media being passed over the channel is audio. This patch fixes this bug
by having the framehook specify that it defers caring about any frame type.
This allows the channels to enter into a direct media bridge, which will
be broken when a re-INVITE is received.
(2) When a re-INVITE is received, nothing instructed the bridging layer to
re-inspect the allowed bridging technology. This now occurs when either
a re-INVITE is received from a peer, or when a response is received from
the far end (that is, when the T.38 state changes to either
T38_PEER_REINVITE or T38_LOCAL_REINVITE).
(3) chan_pjsip needs to do a small amount of work to prevent a direct media
bridge from being chosen when a T.38 session is in progress. When a T.38
session supplement has a t38 datastore - which is added when we detect
we should start thinking about T.38 on a channel - we now refuse a native
RTP bridge.
(4) When a BYE request is received, we don't terminate the T.38 session. If
the other side of a T.38 fax survives the hangup (due to the 'g' flag
in Dial, for example), we don't currently re-INVITE the media on the
other channel back to audio. This patch now has res_pjsip_t38 intercept
BYE requests and inform the far side that the T.38 session is terminated.
This naturally causes the correct re-INVITEs to be sent.
ASTERISK-25582
Change-Id: Iabd6aa578e633d16e6b9f342091264e4324a79eb
Apparently some endpoints attempt to send a reINVITE before completing the
initial INVITE transaction. In this case PJSIP responds appropriately to
the reINVITE with a 491 INVITE request pending. Unfortunately chan_pjsip
is using the initial INVITE transaction state to determine if an INVITE is
the initial INVITE or a reINVITE. Since the initial INVITE transaction
has not been confirmed yet chan_pjsip thinks the reINVITE is an initial
INVITE and starts another PBX thread on the channel. The extra PBX thread
ensures that hilarity ensues.
* Fix checks for a reINVITE on incoming requests to look for the presence
of a to-tag instead of the initial INVITE transaction state.
* Made caller_id_incoming_request() determine what to do if there is a
channel on the session or not. After a channel is created it is too late
to just store the new party id on the session because the session's party
id has already been copied to the channel's caller id.
ASTERISK-25404 #close
Reported by: Chet Stevens
Change-Id: Ie78201c304a2b13226f3a4ce59908beecc2c68be
Some systems require the REFER packet to include a Referred-By header.
If the channel variable SIPREFERREDBYHDR is set, it passes that value as the
Referred-By header value. Otherwise, it adds the current dialog’s local info.
Reported by: Dan Cropp
Tested by: Dan Cropp
Change-Id: I3d17912ce548667edf53cb549e88a25475eda245
Although unlikely, if the tech private is returned as
a NULL, chan_pjsip_get_rtp_peer() would crash.
ASTERISK-25323
Change-Id: Ie231369bfa7da926fb2b9fdaac228261a3152e6a
In chan_pjsip_new, if allocation of the pvt
structure fails, ast_hangup is called. But
it was written to assume pvt was valid, and
this change corrects that.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: I5f47860fe9cee4cd56abd3f79b108678ab72cc87
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9