Jansson is thread safe for all read-only functions and reference
counting starting v2.11. This allows simplification of our code and
removal of locking around reference counting and dumping.
Change-Id: Id985cb3ffa6681f9ac765642e20fcd187bd4aeee
The installation script and the new configure option --with-pjproject-bundled
aimed to accomplish the same. However, the installation script was out of
date. Users should go for the maintained configure option, or the Wiki.
ASTERISK-24598
Change-Id: Icbf4b562f81f7c05bd24a3805bd46c0beb4ebd44
This re-enables the script ./contrib/scripts/install_prereq on Fedora 22 and
newer, and on RHEL/CentOS when the option strict=1 was set for yum install.
ASTERISK-27598
Reported by: Hunter Stevens, Said Masoud
Change-Id: I40f9517122aaa6906e8fc0962b4b8008dfddb368
The OUTPUTDIR environment variable can now be set either in the
environment itself or in ast_debug_tools.conf. If set, it's used
for all work products instead of /tmp.
Also added the --tarball-config option that includes the contents
of /etc/asterisk when either --tarball-coredumps or --tarball-results
are used.
Change-Id: I66b2553319df61caea5b313d084f51978f730b4c
Since Asterisk 13.17, libSRTP 2.x is supported. Therefore, its latest version
is installed again via the script install_prereq.
ASTERISK-27356
Change-Id: I13125839a79052356469e41edacbebff0a937d39
Adds an extra option, --asterisk-bin=<path> to ast_coredumper. If
provided, the binary given to gdb will be the parameter, rather than
asterisk from the PATH.
ASTERISK-27380 #close
Change-Id: I25f5b91eb75059b0fb2f142e468c26b283b0a9f3
The --tarball-coredump option now creates a gzipped tarball of
coredumps processed, their results txt files and copies of
/etc/os-release, /usr/sbin/asterisk, /usr/lib(64)/libasterisk* and
/usr/lib(64)/asterisk as those files are needed to properly examine
the coredump. The file will be named
/tmp/asterisk.<timestamp>.coredumps.tar.gz or
/tmp/asterisk-<uniqueid>.coredumps.tar.gz if --tarball-uniqueid was
specified.
Added dumps of *_siginfo to the top of the txt files so you can
tell what signal was invoked.
Change-Id: Ib9ee6d83592d4b1bc90cb3419a05376a88d1ded9
when 'all' is specified in an allow or disallow section, it should erase
all values from the inverse section in the default config. E.G.
allow=all should erase any deny values from default config &
vice-versa
ASTERISK-27333 #close
Change-Id: I99219478fb98f08751d769daaee0b7795118a5a6
AMI goes from 3.2.0 to 4.0.0
ARI goes from 2.0.0 to 3.0.0
Copied UPGRADE.txt -> UPGRADE-15.txt
Created new UPGRADE.txt
Removed a log file that was accidentally checked in a while ago
Change-Id: I1c794f910038459b13e16f9c3a12c44e56f142f7
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
ast_loggrabber gathers log files from customizable search patterns,
optionally converts POSIX timestamps to a readable format and
tarballs the results.
Also a few tweaks were made to ast_coredumper.
Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
(cherry picked from commit c709152878)
This utility allows easy manipulation of asterisk coredumps.
* Configurable search paths and patterns for existing coredumps
* Can generate a consistent coredump from the running instance
* Can dump the lock_infos table from a coredump
* Dumps backtraces to separate files...
- thread apply 1 bt full -> <coredump>.thread1.txt
- thread apply all bt -> <coredump>.brief.txt
- thread apply all bt full -> <coredump>.full.txt
- lock_infos table -> <coredump>.locks.txt
* Can tarball corefiles and optionally delete them after processing
* Can tarball results files and optionally delete them after processing
* Converts ':' in coredump and results file names '-' to facilitate
uploading. Jira for instance, won't accept file names with colons
in them.
Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].
[1] For *BSDs, the "devel/gdb" package might have to be installed to
get a recent gdb. The utility will check all instances of gdb
it finds in $PATH and if one isn't found that can run python, it
prints a friendly error.
Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
(cherry picked from commit cb47b45560)
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
Map the sip.conf general section legacy_useroption_parsing to the
new pjsip.conf global ignore_uri_user_options.
ASTERISK-26316
Reported by: Kevin Harwell
Change-Id: I78108a31995db19d41f4e1a07b3324692c5363fc
If you use the safe_asterisk script, it uses hardcoded defaults before
running configurable values from /etc/asterisk/startup.d. The hardcoded
default has TTY=9. Some containerized environments don't have such a
TTY, and safe_asterisk would stop.
The custom configuration from /etc/asterisk/startup.d/* isn't read until
after it stopped, so changing TTY in a custom config did not help.
This changeset changes safe_asterisk to continue if the TTY setting was
untouched and /dev/tty9 and /dev/vc/9 aren't found.
Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc
When using the migration script sip_to_pjsip.py, and your sip.conf is
configured with bindaddr=::, two transports are written to pjsip.conf, one for
0.0.0.0 (IPv4) and one for [::] (IPv6). That way, PJProject listens on the IPv4
and IPv6 wildcards; a IPv4/IPv6 Dual Stack configuration on a single interface
like in chan_sip.
Furthermore, the script internal functions "build_host" and "split_hostport"
did not parse Literal IPv6 addresses as expected (like [::1]:5060). This change
makes sure, even such addresses are parsed correctly.
ASTERISK-26309
Change-Id: Ia4799a0f80fc30c0550fc373efc207c3330aeb48
When using the migration script sip_to_pjsip.py, cert_file was not migrated to
pjsip.conf. A previous change regarding this contained a copy/paste error.
ASTERISK-22374
Change-Id: I0fa72e9412117d53b4284fc6b83fa5b2b95ba03b
A recent update had a copy/paste error where the unused variable 'val' was
being passed to the set_value function instead of the 'method' value itself.
This patch passes in the right variable.
ASTERISK-22374
Change-Id: I895b7b3779ce4442bc58b8ec40d59dd29bb43f06
Corey Farrell
Alexander Traud
Jenkins2
Sean Bright
George Joseph
Joshua Colp
Tzafrir Cohen
Torrey Searle
Richard Mudgett
zuul
Walter Doekes
Kevin Harwell