This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(Copied from reviewboard)
Tests the following:
1. Basic allocation and setting of string fields.
2. Shrinking a string field and re-expanding it.
3. Growing the last allocation in a string field pool.
4. Setting a string to a large value such that a new string field pool must be
allocated.
In each part, we make sure that the string field is accurate (has the correct
value in it), make sure that the 2 bytes before the string field has the correct
capacity for the field, and for tests 2-4, we make sure that the string field is
where we expect it to be in memory.
Also tested:
5. Shrinking a string field and partially re-expanding it.
6. Setting strings in such a way as to create three separate string field pools
and then removing the middle pool.
There is a bug fix in the init function, which ensures the embedded_pool is set
to NULL which is important for stack allocated structures.
Review: https://reviewboard.asterisk.org/r/185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some reason the documentation for the 'k' application in trunk
and 1.6.2 is different than 1.6.0 and 1.6.1, so I'm setting them all
to match. The wording in 1.6.2 and trunk was ambiguous, so you could
interpret the wording the mean that recording would continue upon hangup
indefinitely, or you could interpret it to mean that the recorded
data would not be discarded upon hangup. This change makes it clear
we mean the latter, and not the former.
Came from a discussion in #asterisk on IRC.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch ensures that if a peer does not exist, parking settings are read from
the channel. A unit test has been written to ensure proper operation for both
standard parking and parking using masquerades.
(closes issue #16592)
Reported by: mwyres
Patches:
bug_16592.diff uploaded by snuffy (license 35)
Review: https://reviewboard.asterisk.org/r/539/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Three changes made here:
1) Do not fail if a previous log does not exist (in fact, this is probably
expected).
2) Ensure that the file descriptor to write to gets assigned properly. I am at
a loss as to why assigning safe_fd outside the if fixes this, but it makes
the if statement slightly less complicated anyway.
3) Move up the failure message so that the errno of the failure is not
overwritten by fclose.
(closes issue #16917)
Reported by: Artem
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251631 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rework HAVE_PRI_SERVICE_MESSAGES to not use the active values directly
from the database. Database access is likely expensive. Database access
now only happens on initialization, destruction, and when the B channel is
taken in or out of service.
This change is not related to call waiting but it would cause the search
for a call waiting interface to be very expensive and slow down D channel
message servicing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r251309 | lmadsen | 2010-03-08 12:07:44 -0600 (Mon, 08 Mar 2010) | 13 lines
Fix Debian init script to not use -c.
When using the init script as-is currently, it could cause issues on Debian
such as high CPU usage. This fix has worked for several people so I'm
implementing the change.
(closes issue #16784)
Reported by: pabelanger
Tested by: pabelanger, mnick, davidw, mutineer612
(closes issue #16887)
Reported by: jlpedrosa
Tested by: jlpedrosa, mutineer612
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Small patch changing skinny_set_rtp_peer to use transmit_stopmediatransmission and to use new transmit_startmediatransmission.
Basic testing on 30VIP's by wedhorn
Basic testing on 7960 by me
(closes issue #16956)
Reported by: wedhorn
Patches:
skinny-clean05b.diff uploaded by wedhorn (license 30)
Tested by: wedhorn,mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Broke the various functions included in transmit_callstate to their own functions. Transmit_callstate now just transmits callstate.
Generally left the functionality as it was, which highlight some minor code issues (eg multiple transmit_callstate's). I did however revise the hint code usage of the old transmit_callstate as it it not appropriate to put a device on hook based on the change of a hinted device.
(closes issue #16939)
Reported by: wedhorn
Patches:
skinny-clean04.diff uploaded by wedhorn (license 30)
Tested by: mvanbaak,wedhorn
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The first real test added to the external test suite found a pretty nasty crash
that occurred in Asterisk trunk. The crash was due to a race condition between
the REFER handling and channel destruction in the channel thread. After the
transfer has been completed, we go back to the transferrer channel and try to
lock it so we can fire off a CEL event. However, there was no guarantee that
the channel was still around at that point since it's racing against the channel
thread.
Since ast_channel is a reference counted object, the fix is simple. The code
unlocks the transferrer channel before finally completing the transfer with
an async goto. At this point the channel thread is going to start call tear
down and the channel will eventually be destroyed. To ensure that the channel
is valid when we want to fire off the CEL event, increase the channel's
reference count.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PITCH_SHIFT function can be used on a channel to independently
modify the pitch of both rx and tx audio streams. Now you can
improve your conference calls by assigning a random pitch effect
to everyone entering a meetme room, or just make your day more
interesting by making your co-workers sound funny. These are just
some of the numerious practical uses for this function. Enjoy!
https://reviewboard.asterisk.org/r/526/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The get_local_address() function for an RTP instance was used when building an
SDP, but the results were not honored. The RTP engine activate() function was
not being used once we have determined that media will now flow.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The mis-placement of the latest entry meant that when it was set, it was writing
one index past the end of the properties array in the ast_rtp_instance (which
happened to be the local_address field).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250871 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250613 | lmadsen | 2010-03-03 16:28:02 -0500 (Wed, 03 Mar 2010) | 11 lines
Update existing Local channel documentation.
A complete re-write of the Local channel documentation has been performed, with
the existing information from localchannel.txt and localchannel.tex merged in.
(issue #16637)
Reported by: kobaz
Patches:
localchannel.tex uploaded by lmadsen (license 10)
localchannel.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jsmith, mmichelson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250614 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A complete re-write of the Local channel documentation has been performed, with
the existing information from localchannel.txt and localchannel.tex merged in.
(closes issue #16637)
Reported by: kobaz
Patches:
localchannel.tex uploaded by lmadsen (license 10)
localchannel.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jsmith, mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Only chan_dahdi set a value in cdrflags. Everyone else just copied it
around the system. Noone cared about any value it may have contained.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250480 | jpeeler | 2010-03-03 13:04:11 -0600 (Wed, 03 Mar 2010) | 15 lines
Make sure to clear red alarm after polarity reversal.
From the issue:
The automatic overnight line tests (or manual ones) used on UK (BT) lines causes
a red alarm on a dahdi / TDM400P connected channel. This is because the line
uses voltage tests (battery loss) and polarity reversal. The polarity reversal
causes chan_dahdi to initiate v23 CallerID processing but during this the event
DAHDI_EVENT_NOALARM is ignored so that the alarm is never cleared.
(closes issue #14163)
Reported by: jedi98
Patches:
chan_dahdi-1.4-inalarm.diff uploaded by jedi98 (license 653)
Tested by: mattbrown, Chainsaw, mikeeccleston
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250394 | dvossel | 2010-03-03 12:02:27 -0600 (Wed, 03 Mar 2010) | 16 lines
fixes problem with duplicate TXREQ packets
When Asterisk receives an IAX2 TXREQ packet, try_transfer()
will call store_by_transfercallno() to link the chan_iax2_pvt
struct into iax_transfercallno_pvts. If a duplicate TXREQ
packet is received for the same call, the pvt struct will be
linked into iax_transfercallno_pvts multiple times. This patch
fixes this. Thanks rain for debugging this and providing a patch!
(closes issue #16904)
Reported by: rain
Patches:
iax2-double-txreq-fix.diff uploaded by rain (license 327)
Tested by: rain, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New config parameter "reportalarms" added in chan_dahdi.conf which supports the
following possible values:
"channels": report each channel alarms (current behavior, default for backward compatibility)
"spans": report an "SpanAlarm" event when the span of any configured channel is alarmed
"all": report channel and span alarms (aggregated behavior)
"none": do not report any alarms
(closes issue #16709)
Reported by: nahuelgreco
Patches:
chan_dahdi.c.reportalarms.patch uploaded by nahuelgreco (license 162)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Terry Wilson
Moises Silva
Richard Mudgett
Alec L Davis
Jeff Peeler
Leif Madsen
Sean Bright
Michiel van Baak
Alexandr Anikin
Russell Bryant
David Vossel
Mark Michelson
Matthew Nicholson