Adds the end_marked_any option, which can be used
to kick a user from a conference if any marked user
leaves.
ASTERISK-30211 #close
Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
A new user option, answer_channel, adds the capability to
prevent answering the channel if it hasn't already been
answered yet.
ASTERISK-29440
Change-Id: I26642729d0345f178c7b8045506605c8402de54b
app_confbridge now has the ability to set the estimated bitrate on an
SFU bridge. To use it, set a bridge profile's remb_behavior to "force"
and set remb_estimated_bitrate to a rate in bits per second. The
remb_estimated_bitrate parameter is ignored if remb_behavior is something
other than "force".
Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a
When in a conference bridge it may be necessary to have
text messages disabled for specific participants or for
all. This change adds a configuration option, "text_messaging",
which can be used to enable or disable this on the
user profile. By default existing behavior is preserved
as it defaults to "yes".
ASTERISK-28841
Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
The mute/unmute sounds are only played when the
action is initiated using the DTMF menu.
ASTERISK-24756
Change-Id: I55b3dd5bc166096bf5e2f547ddd0ce355f36e3dc
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This patch allows for having app_confbridge register the name of the
conference as an extension into a specific context, similar to
regcontext for chan_sip. This variant is not quite as involved as the
one in chan_sip and doesn't allow for multiple contexts or custom
extensions, you can only specify the context and the conference name
will always be used as the extension to register.
ASTERISK-25989 #close
Change-Id: Icacf94d9f2b5dfd31ef36f6cb702392619a7902f
This option adds the ability to specify a timeout, in seconds, for a
participant in a ConfBridge. When the user's timeout has been reached,
the user is ejected from the conference with the CONFBRIDGE_RESULT
channel variable set to "TIMEOUT".
The rationale for this change is that there have been times where we
have seen channels get "stuck" in ConfBridge because a network issue
results in a SIP BYE not being received by Asterisk. While these
channels can be hung up manually via CLI/AMI/ARI, adding some sort of
automatic cleanup of the channels is a nice feature to have.
ASTERISK-25549 #close
Reported by Mark Michelson
Change-Id: I2996b6c5e16a3dda27595f8352abad0bda9c2d98
This patch adds the ability to pass options and a command to MixMontor when
recording a conference using ConfBridge.
New options are -
* record_options: Options to MixMontor, eg: m(), W() etc.
* record_command: The command to execute when recording is over.
* record_file_timestamp: Append the start time to the file name.
These options can also be used with the CONFBRIDGE function, e.g.,
Set(CONFBRIDGE(bridge,record_command)=/path/to/command ^{MIXMONITOR_FILENAME}))
Review: https://reviewboard.asterisk.org/r/4023
ASTERISK-24351 #close
Reported by: Gareth Palmer
patches:
record_command-428838.patch uploaded by Gareth Palmer (License 5169)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Naveen Albert
Michael Cargile
Naveen Albert
George Joseph
Joshua C. Colp
Joshua Colp
Richard Mudgett
frahaase
Jaco Kroon
Mark Michelson
Matthew Jordan