Adds option to specify a private key .pem file when configuring TLS or SSL in AMI, HTTP, and SIP. Before this, the certificate file was used for both the public and private key. It is possible for this file to hold both, but most configurations allow for a separate private key file to be specified. Clarified in .conf files how these options are to be used. The current conf files do not explain how the private key is handled at all, so without knowledge of Asterisk's TLS implementation, it would be hard to know for sure what was going on or how to set it up.
Review: http://reviewboard.digium.com/r/234/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for you to change the From header for outgoing MWI
NOTIFY requests. Prior to this, the best you could do was to
set a callerid in the general section of sip.conf. The problem
was that this was used for all outbound requests, not just
MWI NOTIFY requests.
AST-201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(inspired by this evening's Toronto Asterisk Users Group meeting and previous dicussions amongst various community members)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180380 | mmichelson | 2009-03-05 12:58:48 -0600 (Thu, 05 Mar 2009) | 25 lines
Fix broken mailbox parsing when searchcontexts option is enabled.
When using the searchcontexts option in voicemail.conf, the code
made the assumption that all mailbox names defined were unique across
all contexts. However, the code did nothing to actually enforce this
assumption, nor did it do anything to alert a user that he may have
created an ambiguity in his voicemail.conf file by defining the same
mailbox name in multiple contexts.
With this change, we now will issue a nice long warning if searchcontexts
is on and we encounter the same mailbox name in multiple contexts and ignore
any duplicates after the first box. Whether searchcontexts is enabled or not,
if we come across a duplicate mailbox in the same context, then we will issue
a warning and ignore the duplicated mailbox. I have also added a small note
to voicemail.conf.sample in the explanation for searchcontexts explaining
that you cannot define the same mailbox in multiple contexts if you have
enabled the option.
(closes issue #14599)
Reported by: lmadsen
Patches:
14599.patch uploaded by mmichelson (license 60) (with slight modification)
Tested by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the subscription context for a call pickup subscription differs
from the context of the call pickup target, there's not an easy way
to divine what context should be used for the pickup. The way to work
around this is to use PICKUPMARK as the context for the pickup.
This has been documented in the sip.conf.sample file
(ABE-1708)
closes issue #14567
submitted by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180006 | mmichelson | 2009-03-03 16:48:18 -0600 (Tue, 03 Mar 2009) | 17 lines
Clarify some documentation of queues.conf.sample
It had always been possible to explicitly specify a "blank"
value for a sound file in queues.conf and have no sound played
back. The problem with this is that it would result in some ugly
CLI warnings from file.c.
This commit introduces a check when playing a file in app_queue
to see if the name of the file is zero-length and return early if
that is the case. Also, the ability to specify the blank sound
files in queues.conf is now mentioned more clearly in queues.conf.sample
(closes issue #14227)
Reported by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
Review: http://reviewboard.digium.com/r/159/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the 'faxdetect' configuration option is used, one may also want to use
the 'faxbuffers' configuration option in chan_dahdi.conf. This option will
dynamically use the configured 'faxbuffers' buffer policy on a channel for
the life of the call following the detection of fax tones. The faxbuffers
buffer policy will be reverted during call teardown.
An example use of 'faxbuffers' is below. This example would switch to using
6 buffers with a full buffer policy.
faxbuffers=>6,full
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is very similar to the DAHDI immediate=yes option. When the phone is picked up, instead of giving a dialtone it connects directly to the "s" extension. Changes where implemented in chan_iax2.c to directly connect to the "s" extension in the appropriate context when this option is enabled. Examples explaining its use are added to iax2.conf.sample. CHANGES has been updated as well.
(closes issue #14266)
Reported by: jcovert
Patches:
chan_iax2.c.patch-trunk uploaded by jcovert (license 551)
iax.conf.sample.patch uploaded by jcovert (license 551)
Tested by: jcovert, dvossel
Review: http://reviewboard.digium.com/r/143/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In trunk, the only necessary change pointed out was that the call
to ChanIsAvail uses an option that has been removed.
For the 1.6.1 branch, however, it appears that the sample file is
badly in need of updating since there are |'s used all over the place
there. My tentative plan is just to copy trunk's sample config file
to those branches since the info there is most up-to-date and should
be correct for use in 1.6.1
Thanks to macli in #asterisk-dev for bringing this up
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents the situation when MWI messages are added to caller ID spills causing the channel to be hung up
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169153 65c4cc65-6c06-0410-ace0-fbb531ad65f3