Modern browsers are checking for the MIME Type of pages
and in some cases will not load a file if the type is
wrong.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r307536 | qwell | 2011-02-10 16:39:30 -0600 (Thu, 10 Feb 2011) | 22 lines
Merged revisions 307535 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r307535 | qwell | 2011-02-10 16:35:49 -0600 (Thu, 10 Feb 2011) | 15 lines
Merged revisions 307534 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r307534 | qwell | 2011-02-10 16:33:09 -0600 (Thu, 10 Feb 2011) | 8 lines
Remove color when executing commands via a remote console.
Essentially this makes '-x' imply '-n' on rasterisk. This was done in a
different and incomplete way previously, which I'm reverting here.
(issue #18776)
Reported by: alecdavis
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The nativeformats field was being overwritten when it should have been
appended too. This caused some format capabilities to be lost briefly and
some log warnings to be output.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307092 | qwell | 2011-02-08 15:24:01 -0600 (Tue, 08 Feb 2011) | 9 lines
Fix issue with verbose messages not showing on remote console.
This code was reworked recently, and since the logchannel list hadn't been
created yet at this point, and it was a verbose message, it was being dropped
on the floor. Now it'll continue on to where it should be handled.
(closes issue #18580)
Reported by: pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307065 | mmichelson | 2011-02-08 15:13:08 -0600 (Tue, 08 Feb 2011) | 6 lines
Add a couple of useful channel variables for the CC recall macro.
CC_EXTEN and CC_CONTEXT will allow you to determine the channel
and context that will be called when the recall occurs.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306674 | twilson | 2011-02-07 14:43:22 -0800 (Mon, 07 Feb 2011) | 24 lines
Merged revisions 306673 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306673 | twilson | 2011-02-07 14:40:20 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306672 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306672 | twilson | 2011-02-07 14:35:20 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't try to pickup a call in the middle of a masquerade
If A calls B which doesn't answer and C & D both try to do a call pickup, it is
possible for ast_pickup_call to answer the call, then fail to masquerade one of
the calls because the other one is already in the process of masquerading. This
patch checks to see if the channel is in the process of masquerading before
call before selecting it for a pickup.
Review: https://reviewboard.asterisk.org/r/1094/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306575 | mmichelson | 2011-02-07 11:36:56 -0600 (Mon, 07 Feb 2011) | 9 lines
Rearrange a bit of code in the generic CC recall operation.
By waiting to call the callback macro after the CC_INTERFACES,
extension, priority, and context have been set, this information
can be accessed more easily within the callback macro.
Reported by Philippe Lindheimer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The logic got reversed, oops. Works properly now when multiple blackfilters are
present.
(closes issue #18283)
Reported by: telecos82
Patches:
ast_managereventfilter.patch uploaded by telecos82 (license 687)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306124 | jpeeler | 2011-02-03 14:50:48 -0600 (Thu, 03 Feb 2011) | 17 lines
Merged revisions 306123 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r306123 | jpeeler | 2011-02-03 14:49:48 -0600 (Thu, 03 Feb 2011) | 10 lines
Set exception on channel in parking thread when POLLPRI event detected.
This is done just to make the code be equivalent to the old select code. As
noted in 303106 the same issue was already fixed in this branch, but the
exception was not set on the channel in the case of POLLPRI. The reason that
this did not cause a problem here is because in 122923 the check in __ast_read
to check the exception flag was removed.
(related to #18637)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305923 | rmudgett | 2011-02-02 18:24:40 -0600 (Wed, 02 Feb 2011) | 24 lines
Merged revisions 305889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r305247 | qwell | 2011-01-31 16:25:23 -0600 (Mon, 31 Jan 2011) | 7 lines
Add alternative name for config option.
The SIP sample configuration had "tlscadir" as the option name, but chan_sip
used the more correct "tlscapath". Now both are accepted.
Discovered (sort of) by a user on IRC in #asterisk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r304950 | tilghman | 2011-01-31 00:41:36 -0600 (Mon, 31 Jan 2011) | 18 lines
Change mutex tracking so that it only consumes memory in the core mutex object when it's actually being used.
This reduces the overall size of a mutex which was 3016 bytes before this back
down to 216 bytes (this is on 64-bit Linux with a glibc-implemented mutex).
The exactness of the numbers here may vary slightly based upon how mutexes are
implemented on a platform, but the long and short of it is that prior to this
commit, chan_iax2 held down 98MB of memory on a 64-bit system for nothing more
than a table of 32767 locks. After this commit, the same table occupies a mere
7MB of memory.
(closes issue #18194)
Reported by: job
Patches:
20110124__issue18194.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/1066
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r304638 | seanbright | 2011-01-28 15:19:08 -0500 (Fri, 28 Jan 2011) | 11 lines
Restore some conditionals that we lost in r277814.
There are some cases where ast_append_ha() is called with a NULL instead of a
valid int pointer. So if we get a NULL, don't try to dereference it.
(closes issue #18162)
Reported by: imcdona
Patches:
issue0018162.patch uploaded by pabelanger (license 224)
Tested by: enegaard
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304097 | seanbright | 2011-01-25 20:26:26 -0500 (Tue, 25 Jan 2011) | 19 lines
Merged revisions 304096 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r304096 | seanbright | 2011-01-25 20:24:58 -0500 (Tue, 25 Jan 2011) | 12 lines
Per the man page, setvbuf() must be called before any other operation on an open file.
We use setvbuf() to associate a buffer with a stream, but we have already written
to the open file. This works (by chance) on Linux, but fails on other platforms,
such as OpenSolaris.
(closes issue #16610)
Reported by: bklang
Patches:
setvbuf.patch uploaded by crjw (license 963)
Tested by: bklang, asgaroth, efutch
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304007 | rmudgett | 2011-01-25 17:28:25 -0600 (Tue, 25 Jan 2011) | 22 lines
Merged revisions 304006 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r304006 | rmudgett | 2011-01-25 17:25:32 -0600 (Tue, 25 Jan 2011) | 15 lines
Merged revisions 304005 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r304005 | rmudgett | 2011-01-25 17:21:09 -0600 (Tue, 25 Jan 2011) | 8 lines
DTMF attended transfers sometimes fail for no apparent reason.
The loop in feature_request_and_dial() can exit when Party C has answered
without processing an AST_CONTROL_ANSWER. Also sometimes an
AST_CONTROL_ANSWER never happens even though Party C has answered.
Don't hangup Party C if he is up or we receive an AST_CONTROL_ANSWER.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303549 | russell | 2011-01-24 14:51:37 -0600 (Mon, 24 Jan 2011) | 45 lines
Merged revisions 303548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303548 | russell | 2011-01-24 14:49:53 -0600 (Mon, 24 Jan 2011) | 38 lines
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines
Fix channel redirect out of MeetMe() and other issues with channel softhangup.
Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped
working properly. This issue includes a patch that resolves the issue by
removing a call to ast_check_hangup() from app_meetme.c. I left that in my
patch, as it doesn't need to be there. However, the rest of the patch fixes
this problem with or without the change to app_meetme.
The key difference between what happens before and after this patch is the
effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(),
ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme
sees this which causes it to exit as intended. Checking ast_check_hangup()
caused app_meetme to exit earlier in the process, and the target of the
redirect saw the condition where ast_read() returned NULL.
Removing ast_check_hangup() works around the issue in app_meetme, but doesn't
solve the issue if another application did the same thing. There are also
other edge cases where if an application finishes at the same time that a
redirect happens, the target of the redirect will think that the channel hung
up. So, I made some changes in pbx.c to resolve it at a deeper level. There
are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to
abort the hangup process. My patch extends this to remove the END_OF_Q frame
from the channel's read queue, making the "abort hangup" more complete. This
same technique was used in every place where a softhangup flag was cleared.
(closes issue #18585)
Reported by: oej
Tested by: oej, wedhorn, russell
Review: https://reviewboard.asterisk.org/r/1082/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303153 | rmudgett | 2011-01-20 14:31:20 -0600 (Thu, 20 Jan 2011) | 22 lines
Merged revision 303098 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r303098 | rmudgett | 2011-01-20 12:11:45 -0600 (Thu, 20 Jan 2011) | 15 lines
CC_INTERFACES does not get built correctly with local channels.
If local channels are used with CCSS, CC_INTERFACES gets garbage prepended
to it so the CC recall fails. Also CC_INTERFACES gets "&(null)" appended
to it.
* Initialize the buffer to eliminate the prepended garbage.
* Filter out the empty interface strings to eliminate the latter.
* Added a diagnostic message if the CC_INTERFACES is ever empty.
JIRA ABE-2740
JIRA SWP-2848
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303107 | sruffell | 2011-01-20 13:57:31 -0600 (Thu, 20 Jan 2011) | 23 lines
Merged revisions 303106 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r303106 | sruffell | 2011-01-20 13:56:34 -0600 (Thu, 20 Jan 2011) | 15 lines
main/features: Use POLLPRI when waiting for events on parked channels.
This change resolves a regression in the 1.6.2 when converting from
select to poll. The DAHDI timers use POLLPRI to indicate that the timer
fired, but features was not waiting for that flag. The result was no
audio for MOH when a call was parked and res_timing_dahdi was in use.
This patch is slightly modified from the one on the mantis issue. It does
not set an exception on the channel if the POLLPRI flag is set.
(closes issue #18262)
Reported by: francesco_r
Patches:
patch_park_moh-trunk-2.txt uploaded by cjacobsen (license 1029)
Tested by: francesco_r, rfrantik, one47
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r302785 | russell | 2011-01-19 16:35:15 -0600 (Wed, 19 Jan 2011) | 15 lines
Resolve a memory leak with the manager interface is disabled.
The intent of this check as it stands in previous versions of Asterisk was to
check if there are any active sessions. If there were no sessions, then the
function would return immediately and not bother with queueing up the manager
event to be processed. Since the conversion of storing sessions in an astobj2
container, this check will always pass. I changed it to go back to checking
what was intended.
The side effect of this was that if the AMI is disabled, the manager event
queue is populated anyway, but the code that runs to clear out the queue
never runs. A producer with no consumer is a bad thing.
Reported internally by kmorgan.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302786 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302713 | rmudgett | 2011-01-19 15:29:22 -0600 (Wed, 19 Jan 2011) | 29 lines
Merged revisions 302693 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302693 | rmudgett | 2011-01-19 15:25:41 -0600 (Wed, 19 Jan 2011) | 22 lines
Merged revisions 302671 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302671 | rmudgett | 2011-01-19 15:21:56 -0600 (Wed, 19 Jan 2011) | 15 lines
DTMF transfer plays the wrong sounds for wrong number or other call failure.
* Set the default for features.conf.sample xferfailsound option to "beeperr"
as documented instead of "pbx-invalid" and corrected the use of it in DTMF
blind transfer (#1).
* Improved DTMF blind transfer handling of wrong numbers.
Most of the concerns in this issue were taken care of by the patch for
issue 17999: Issues with DTMF triggered attended transfers.
(closes issue #18379)
Reported by: gincantalupo
Tested by: rmudgett
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302634 | tilghman | 2011-01-19 14:24:57 -0600 (Wed, 19 Jan 2011) | 22 lines
Merged revisions 302599 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302599 | tilghman | 2011-01-19 14:13:24 -0600 (Wed, 19 Jan 2011) | 15 lines
Kill zombies.
When we ast_safe_fork() with a non-zero argument, we're expected to reap our
own zombies. On a zero argument, however, the zombies are only reaped when
there aren't any non-zero forked children alive. At other times, we
accumulate zombies. This code is forward ported from res_agi in 1.4, so that
forked children are always reaped, thus preventing an accumulation of zombie
processes.
(closes issue #18515)
Reported by: ernied
Patches:
20101221__issue18515.diff.txt uploaded by tilghman (license 14)
Tested by: ernied
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302555 | seanbright | 2011-01-19 14:03:32 -0500 (Wed, 19 Jan 2011) | 14 lines
Merged revisions 302554 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302554 | seanbright | 2011-01-19 14:02:29 -0500 (Wed, 19 Jan 2011) | 7 lines
Don't call strlen() when we only need to look at the next character or two.
(closes issue #18042)
Reported by: wdoekes
Patches:
astsvn-inefficient-ast-uri-decode.patch uploaded by wdoekes (license 717)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302266 | jpeeler | 2011-01-18 14:19:57 -0600 (Tue, 18 Jan 2011) | 34 lines
Merged revisions 302265 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302265 | jpeeler | 2011-01-18 14:13:52 -0600 (Tue, 18 Jan 2011) | 27 lines
Convert device state callbacks to ao2 objects to fix a deadlock in chan_sip.
Lock scenario presented here:
Thread 1
holds ast_rdlock_contexts &conlock
holds handle_statechange hints
holds handle_statechange hint
waiting for cb_extensionstate
Locked Here: chan_sip.c line 7428 (find_call)
Thread 2
holds handle_request_do &netlock
holds find_call sip_pvt_ptr
waiting for ast_rdlock_contexts &conlock
Locked Here: pbx.c line 9911 (ast_rdlock_contexts)
Chan_sip has an established locking order of locking the sip_pvt and then
getting the context lock. So the as stated by the summary, the operations in
thread 2 have been modified to no longer require the context lock.
(closes issue #18310)
Reported by: one47
Patches:
statecbs_ao2.mk2.patch uploaded by one47 (license 23),
modified by me
Review: https://reviewboard.asterisk.org/r/1072/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302174 | rmudgett | 2011-01-18 12:11:43 -0600 (Tue, 18 Jan 2011) | 102 lines
Merged revisions 302173 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302173 | rmudgett | 2011-01-18 12:07:15 -0600 (Tue, 18 Jan 2011) | 95 lines
Merged revisions 302172 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302172 | rmudgett | 2011-01-18 12:04:36 -0600 (Tue, 18 Jan 2011) | 88 lines
Issues with DTMF triggered attended transfers.
Issue #17999
1) A calls B. B answers.
2) B using DTMF dial *2 (code in features.conf for attended transfer).
3) A hears MOH. B dial number C
4) C ringing. A hears MOH.
5) B hangup. A still hears MOH. C ringing.
6) A hangup. C still ringing until "atxfernoanswertimeout" expires.
For v1.4 C will ring forever until C answers the dead line. (Issue #17096)
Problem: When A and B hangup, C is still ringing.
Issue #18395
SIP call limit of B is 1
1. A call B, B answered
2. B *2(atxfer) call C
3. B hangup, C ringing
4. Timeout waiting for C to answer
5. Recall to B fails because B has reached its call limit.
Because B reached its call limit, it cannot do anything until the transfer
it started completes.
Issue #17273
Same scenario as issue 18395 but party B is an FXS port. Party B cannot
do anything until the transfer it started completes. If B goes back off
hook before C answers, B hears ringback instead of the expected dialtone.
**********
Note for the issue #17273 and #18395 fix:
DTMF attended transfer works within the channel bridge. Unfortunately,
when either party A or B in the channel bridge hangs up, that channel is
not completely hung up until the transfer completes. This is a real
problem depending upon the channel technology involved.
For chan_dahdi, the channel is crippled until the hangup is complete.
Either the channel is not useable (analog) or the protocol disconnect
messages are held up (PRI/BRI/SS7) and the media is not released.
For chan_sip, a call limit of one is going to block that endpoint from any
further calls until the hangup is complete.
For party A this is a minor problem. The party A channel will only be in
this condition while party B is dialing and when party B and C are
conferring. The conversation between party B and C is expected to be a
short one. Party B is either asking a question of party C or announcing
party A. Also party A does not have much incentive to hangup at this
point.
For party B this can be a major problem during a blonde transfer. (A
blonde transfer is our term for an attended transfer that is converted
into a blind transfer. :)) Party B could be the operator. When party B
hangs up, he assumes that he is out of the original call entirely. The
party B channel will be in this condition while party C is ringing, while
attempting to recall party B, and while waiting between call attempts.
WARNING:
The ATXFER_NULL_TECH conditional is a hack to fix the problem. It will
replace the party B channel technology with a NULL channel driver to
complete hanging up the party B channel technology. The consequences of
this code is that the 'h' extension will not be able to access any channel
technology specific information like SIP statistics for the call.
ATXFER_NULL_TECH is not defined by default.
**********
(closes issue #17999)
Reported by: iskatel
Tested by: rmudgett
JIRA SWP-2246
(closes issue #17096)
Reported by: gelo
Tested by: rmudgett
JIRA SWP-1192
(closes issue #18395)
Reported by: shihchuan
Tested by: rmudgett
(closes issue #17273)
Reported by: grecco
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1047/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302178 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r301595 | mnicholson | 2011-01-12 12:51:37 -0600 (Wed, 12 Jan 2011) | 22 lines
Merged revisions 301594 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r301594 | mnicholson | 2011-01-12 12:50:31 -0600 (Wed, 12 Jan 2011) | 15 lines
Removed a usleep(1) that shouldn't be necessary in session_do, and removed the
ms_t member from the mansession_session structure.
Merged revisions 301591 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r301591 | mnicholson | 2011-01-12 12:39:03 -0600 (Wed, 12 Jan 2011) | 5 lines
Don't store the thread id for the manager session in the structure we pass to
the thread for the manager session.
ABE-2543
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r301504 | jpeeler | 2011-01-12 12:12:08 -0600 (Wed, 12 Jan 2011) | 26 lines
Merged revisions 301503 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r301503 | jpeeler | 2011-01-12 12:11:49 -0600 (Wed, 12 Jan 2011) | 19 lines
Merged revisions 301502 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r301502 | jpeeler | 2011-01-12 12:10:42 -0600 (Wed, 12 Jan 2011) | 12 lines
Fix CPU spike when pressing DTMF after agent login.
The problem here is that DTMF was being continuously deferred and requeued
since ast_safe_sleep is called in a loop. There are serveral other places in the
code that sleeps and then loops in a similar fashion. Because of this fact I
opted to not defer DTMF any more, which will not affect the original fix:
https://reviewboard.asterisk.org/r/674
(closes issue #18130)
Reported by: rgj
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297825 | jpeeler | 2010-12-07 16:59:30 -0600 (Tue, 07 Dec 2010) | 26 lines
Merged revisions 297824 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297824 | jpeeler | 2010-12-07 16:58:54 -0600 (Tue, 07 Dec 2010) | 19 lines
Merged revisions 297823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297823 | jpeeler | 2010-12-07 16:57:48 -0600 (Tue, 07 Dec 2010) | 12 lines
Revert code that changed SSRC for DTMF.
Some previous behavior was attempted to be restored, but mistakingly I did
not realize that the previous behavior was incorrect. This fixes DTMF not
being detected since DTMF shouldn't cause the SSRC to change.
(related to issue #17404)
(closes issue #18189)
(closes issue #18352)
Reported by: marcbou
Tested by: cmbaker82
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297826 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297312 | twilson | 2010-12-02 12:13:49 -0600 (Thu, 02 Dec 2010) | 28 lines
Merged revisions 297311 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297311 | twilson | 2010-12-02 12:07:39 -0600 (Thu, 02 Dec 2010) | 21 lines
Merged revisions 297310 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297310 | twilson | 2010-12-02 12:00:27 -0600 (Thu, 02 Dec 2010) | 12 lines
Initialize offset for adaptive jitter buffer
When the adaptive jitter buffer is enabled in sip.conf, the first frame placed
in the jitter buffer fails with something like:
jb_warning_output: Resyncing the jb. last_delay 0, this delay -215886466,
threshold 1000, new offset 215886466
This happens because the offset is not initialized before calling jb_put(). This
patch modifies jb_put_first_adaptive() to set the offset to the frame's
timestamp.
Review: https://reviewboard.asterisk.org/r/1041/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by splitting up devices from hints into an own ao2_container the callback to
get these devices for statechange handling is faster.
with this changes the length of a device used in a hint isnt longer restricted
to 80 characters.
Tests showed that calling handle_statechange is 40 times faster if no hints
are used and 25 times faster if there are any hints.
(closes issue #17928)
Reported by: mdu113
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/1003/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296534 | tilghman | 2010-11-29 01:28:44 -0600 (Mon, 29 Nov 2010) | 20 lines
Merged revisions 296533 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296230 | russell | 2010-11-24 17:29:44 -0600 (Wed, 24 Nov 2010) | 20 lines
Merged revisions 296221 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296221 | russell | 2010-11-24 17:28:19 -0600 (Wed, 24 Nov 2010) | 13 lines
Merged revisions 296213 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296213 | russell | 2010-11-24 17:26:43 -0600 (Wed, 24 Nov 2010) | 6 lines
Make Asterisk less crashy.
Since we might not put a new translation path on the channel, go ahead and
set it to NULL right after destroying the old one to ensure we don't try
to free an invalid translation path later on.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296084 | russell | 2010-11-24 14:23:46 -0600 (Wed, 24 Nov 2010) | 26 lines
Merged revisions 296083 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296083 | russell | 2010-11-24 14:23:11 -0600 (Wed, 24 Nov 2010) | 19 lines
Merged revisions 296082 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296082 | russell | 2010-11-24 14:22:32 -0600 (Wed, 24 Nov 2010) | 12 lines
Fix false reporting of an error by set_format().
In the case that the native format was able to be changed to match the
new requested format, the code proceeded to attempt to build a translation
path, anyway. The result would be NULL, since no translation path is
necessary and resulted in this function thinking an error has occurred.
This case is now specifically caught and no attempt to build a translation
path is attempted.
Thanks to our automated tests and bamboo.asterisk.org for catching this problem
and making a whole lot of noise when things started failing. :-)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296002 | russell | 2010-11-24 11:13:08 -0600 (Wed, 24 Nov 2010) | 52 lines
Merged revisions 296001 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296001 | russell | 2010-11-24 11:03:16 -0600 (Wed, 24 Nov 2010) | 45 lines
Merged revisions 296000 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296000 | russell | 2010-11-24 10:48:39 -0600 (Wed, 24 Nov 2010) | 38 lines
Handle failures building translation paths more effectively.
The problem scenario occurred on a heavily loaded system that was using the
codec_dahdi module and exceeded the hardware transcoding capacity. The failure
mode at that point was not good. The report came in to us as an Asterisk
lock-up. The "core show locks" shows a ton of threads locked up (but no
obvious deadlock). Upon deeper investigation, when the system is in this
state, the CPU was maxed out. The CPU was being consumed by the Asterisk
logger spewing messages on every audio frame for calls set up after transcoder
capacity was reached.
The purpose of this patch is to make Asterisk handle failures to create a
translation path in a more graceful manner. If we can't translate, then the
call just needs to be dropped, as it's not going to work. These are the
changes:
1) In set_format() of channel.c (which is called by set_read_format() and
set_write_format()), it was ignoring if ast_translator_build_path() failed and
returned NULL. It now pays attention to that case and returns a result
reflecting failure. With this change in place, the bridging code will
immediately detect a failure and end the bridge instead of proceeding to try to
bridge frames that can't be translated and making channel drivers freak out by
sending them frames in a format they weren't expecting.
2) In ast_indicate_data() of channel.c, failure of ast_playtones_start() was
ignored. It is now reflected in the return value of the function. This didn't
turn out to have any affect on the bug, but seemed like a good change to leave
in.
3) In app_dial(), when only sending a call to a single endpoint, it will
attempt to do some bridging of its own of early audio. It uses
make_compatible() when it's going to do this. However, it ignored failure from
make compatible. So, even with the fix from #1, if there was early audio going
through app_dial, there would still be a period of invalid frames passing
through. After detecting failure here, Dial() exits.
ABE-2658
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295866 | rmudgett | 2010-11-22 13:36:10 -0600 (Mon, 22 Nov 2010) | 60 lines
Merged revisions 295843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r295843 | rmudgett | 2010-11-22 13:28:23 -0600 (Mon, 22 Nov 2010) | 53 lines
Merged revisions 295790 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r295790 | rmudgett | 2010-11-22 12:46:26 -0600 (Mon, 22 Nov 2010) | 46 lines
The channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295711 | russell | 2010-11-19 18:50:00 -0600 (Fri, 19 Nov 2010) | 36 lines
Merged revisions 295710 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r295710 | russell | 2010-11-19 18:45:51 -0600 (Fri, 19 Nov 2010) | 29 lines
Fix cache of device state changes for multiple servers.
This patch addresses a regression where device states across multiple servers
were not being processing completely correctly. The code works to determine
the overall state by looking at the last known state of a device on each
server. However, there was a regression due to some invasive rewrites of how
the cache works that led to the cache only storing the last device state change
for a device, regardless of which server it was on.
The code is set up to cache device state change events by ensuring that each
event in the cache has a unique device name + entity ID (server ID). The code
that was responsible for comparing raw information elements (which EID is)
always returned a match due to a memcmp() with a length of 0.
There isn't much code to fix the actual bug. This patch also introduces a new
CLI command that was very useful for debugging this problem. The command
allows you to dump the contents of the event cache.
(closes issue #18284)
Reported by: klaus3000
Patches:
issue18284.rev1.txt uploaded by russell (license 2)
Tested by: russell, klaus3000
(closes issue #18280)
Reported by: klaus3000
Review: https://reviewboard.asterisk.org/r/1012/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294349 | rmudgett | 2010-11-09 10:55:32 -0600 (Tue, 09 Nov 2010) | 17 lines
Analog lines do not transfer CONNECTED LINE or execute the interception macros.
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294278 | jpeeler | 2010-11-08 15:59:45 -0600 (Mon, 08 Nov 2010) | 23 lines
Merged revisions 294277 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r294277 | jpeeler | 2010-11-08 15:58:13 -0600 (Mon, 08 Nov 2010) | 16 lines
Fix playback failure when using IAX with the timerfd module.
To fix this issue the alert pipe will now be used when the timerfd module is
in use. There appeared to be a race that was not solved by adding locking in the
timerfd module, but needed to be there anyway. The race was between the timer
being put in non-continuous mode in ast_read on the channel thread and the IAX
frame scheduler queuing a frame which would enable continuous mode before the
non-continuous mode event was read. This race for now is simply avoided.
(closes issue #18110)
Reported by: tpanton
Tested by: tpanton
I put tested by tpanton because it was tested on his hardware. Thanks for the
remote access to debug this issue!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292704 | rmudgett | 2010-10-22 10:47:08 -0500 (Fri, 22 Oct 2010) | 19 lines
Connected line is not updated when chan_dahdi/sig_pri or chan_misdn transfers a call.
When a call is transfered by ECT or implicitly by disconnect in sig_pri or
implicitly by disconnect in chan_misdn, the connected line information is
not exchanged. The connected line interception macros also need to be
executed if defined.
The CALLER interception macro is executed for the held call.
The CALLEE interception macro is executed for the active/ringing call.
JIRA ABE-2589
JIRA SWP-2296
Patches:
abe_2589_c3bier.patch uploaded by rmudgett (license 664)
abe_2589_v1.8_v2.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/958/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292595 | dvossel | 2010-10-21 11:14:33 -0500 (Thu, 21 Oct 2010) | 14 lines
Fixes recursive lock problem in manager.c
It is possible for a AMI session to freeze because of invalid
use of recursive locks during the EVENT processing. This
patch removes the unnecessary locks.
(closes issue #18167)
Reported by: sustav
Patches:
manager_locking_v1.diff uploaded by dvossel (license 671)
Tested by: sustav
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292188 | russell | 2010-10-18 14:50:04 -0500 (Mon, 18 Oct 2010) | 9 lines
Resolve some compiler errors in ast_sockaddr_is_any().
These errors came up once this function was used from within netsock2.c.
The errors were like the following:
netsock2.c:393: error: dereferencing pointer ‘({anonymous})’ does break strict-aliasing rules
The usage of a union here avoids this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291758 | pabelanger | 2010-10-14 11:15:12 -0400 (Thu, 14 Oct 2010) | 11 lines
Add the ability for ast_find_ourip to return IPv4, IPv6 or both.
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291581 | twilson | 2010-10-13 16:01:56 -0700 (Wed, 13 Oct 2010) | 35 lines
Merged revisions 291580 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r291580 | twilson | 2010-10-13 15:58:43 -0700 (Wed, 13 Oct 2010) | 28 lines
Merged revisions 291577 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r291577 | twilson | 2010-10-13 15:45:15 -0700 (Wed, 13 Oct 2010) | 21 lines
Don't ignore frames that have been queued when softhangup'd
When an outgoing call is answered and hung up by the far end *very* quickly, we
may not read any frames and therefor end up with a call that displays the wrong
disposition/DIALSTATUS. The reason is because ast_queue_hangup() immediately
sets the _softhangup flag on the channel and then queues the HANGUP control
frame, but __ast_read refuses to read any frames if ast_check_hangup() indicates
that a hangup request has been made (which it will if _softhangup is set). So,
we end up losing control frames.
This change makes __ast_read continue to read frames even if a soft hangup has
been requested. It queues a hangup frame to make sure that __ast_read() will
still eventually return NULL.
Much thanks to David Vossel for all of the reviews, discussion, and help!
(closes issue #16946)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/740/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291227 | dvossel | 2010-10-12 10:58:56 -0500 (Tue, 12 Oct 2010) | 16 lines
Fixes manager.c crash.
This issue was caused by improper use of the mansession lock and
manession_session lock. These two structures are confusing to begin
with so I'm not surprised this occurred. I fixed this by consistently
making sure we use each of these locks only to protect the data
in the corresponding structure. We had mismatched usage of these
locks which resulted in no mutual exclusivity occurring at all.
(closes issue #17994)
Reported by: vrban
Patches:
mansession_locking_fix.diff uploaded by dvossel (license 671)
Tested by: vrban
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291075 | rmudgett | 2010-10-11 11:42:54 -0500 (Mon, 11 Oct 2010) | 22 lines
Merged revisions 291073 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r291073 | rmudgett | 2010-10-11 11:39:17 -0500 (Mon, 11 Oct 2010) | 15 lines
Fixed infinite loop in verbose/debug message output.
Setting the module/filename specific message level and then changing it
resulted in the linked list being looped on itself. Traversing this
linked list is an infinite loop if what you are looking for is not in the
list.
Also plugged some CLI parsing holes in the associated CLI command:
* Removing a nonexistent module from the list actually added it with a
level of zero.
* Setting the non-module specific level to zero is now equivalent to
setting it to "off" as documented.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290864 | jpeeler | 2010-10-07 21:56:24 -0500 (Thu, 07 Oct 2010) | 23 lines
Merged revisions 290863 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r290863 | jpeeler | 2010-10-07 21:45:44 -0500 (Thu, 07 Oct 2010) | 16 lines
Merged revisions 290862 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r290862 | jpeeler | 2010-10-07 21:35:29 -0500 (Thu, 07 Oct 2010) | 9 lines
Ensure editline cleanup occurs when Ctrl-C is pressed at control console.
A recent change was made to avoid a race condition on shutdown which only called
the end functions from the console thread. However, when pressing Ctrl-C the
quit handler is called from the signal handler thread.
(closes issue #17698)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290255 | tilghman | 2010-10-04 18:23:11 -0500 (Mon, 04 Oct 2010) | 18 lines
Merged revisions 290254 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r290254 | tilghman | 2010-10-04 18:14:59 -0500 (Mon, 04 Oct 2010) | 11 lines
Change new pattern matcher to regard dashes the same as the old pattern matcher -- as visual candy to be ignored.
Also change the AEL parser to not generate dashes within extensions, as those
dashes would be ignored. Update the AEL tests to match this behavior.
(closes issue #17366)
Reported by: murf
Patches:
20100727__issue17366.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289340 | qwell | 2010-09-29 16:12:43 -0500 (Wed, 29 Sep 2010) | 22 lines
Merged revisions 289339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289339 | qwell | 2010-09-29 16:03:47 -0500 (Wed, 29 Sep 2010) | 15 lines
Merged revisions 289338 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289338 | qwell | 2010-09-29 15:56:26 -0500 (Wed, 29 Sep 2010) | 8 lines
Allow a manager originate to succeed on forwarded devices.
The timeout to wait for an answer was being set to 0 when a device forwarded to another
extension. We don't always need the timeout set like this, so make it an optional
parameter, and don't use it in this case.
ABE-2544
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289099 | bbryant | 2010-09-28 14:18:02 -0400 (Tue, 28 Sep 2010) | 28 lines
Merged revisions 289095 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289095 | bbryant | 2010-09-28 14:14:19 -0400 (Tue, 28 Sep 2010) | 21 lines
Merged revisions 289094 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289094 | bbryant | 2010-09-28 14:10:19 -0400 (Tue, 28 Sep 2010) | 14 lines
Fixes an issue with the Newchannel AMI event during the Masquerading process.
Fixes an issue with the Newchannel AMI event during the Masquerading process,
where no Newchannel AMI event was generated for the psuedo channel used during
the masquerading process.
(closes issue #17987)
Reported by: RadicAlish
Patches:
newchannel.patch.txt uploaded by RadicAlish (license 1122)
Tested by: RadicAlish
Review: https://reviewboard.asterisk.org/r/937/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r288341 | russell | 2010-09-22 11:45:18 -0500 (Wed, 22 Sep 2010) | 25 lines
Merged revisions 288340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288340 | russell | 2010-09-22 11:44:13 -0500 (Wed, 22 Sep 2010) | 18 lines
Merged revisions 288339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288339 | russell | 2010-09-22 11:39:16 -0500 (Wed, 22 Sep 2010) | 11 lines
Fix a 100% CPU consumption problem when setting console=yes in asterisk.conf.
The handling of -c and console=yes should be the same, but they were not.
When you specify -c, it sets both a flag for console module and for asterisk
not to fork() off into the background. The handling of console=yes only set
console mode, so you would end up with a background process() trying to run
the Asterisk console and freaking out since it didn't have anything to read
input from.
Thanks to beagles for reporting and helping debug the problem!
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r288079 | rmudgett | 2010-09-21 15:29:51 -0500 (Tue, 21 Sep 2010) | 2 lines
Protect channel access in CONNECTED_LINE and REDIRECTING interception macro launch code.
........
r288080 | rmudgett | 2010-09-21 15:29:59 -0500 (Tue, 21 Sep 2010) | 8 lines
Simplify locking code for REDIRECTING interception macro when forwarding a call.
Simplified the locking code by using a local copy of the redirecting party
information in app_dial.c:do_forward() and app_queue.c:wait_for_answer()
for launching the REDIRECTING interception macro when a call is forwarded.
Reduced the lock time of the 'o->chan' and 'in' channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r287685 | alecdavis | 2010-09-21 11:16:45 +1200 (Tue, 21 Sep 2010) | 18 lines
ast_channel_masquerade: Avoid recursive masquerades.
Check all 4 combinations of (original/clonechan) * (masq/masqr).
Initially original->masq and clonechan->masqr were only checked.
It's possible with multiple masq's planned - and not yet executed, that
the 'original' chan could already have another masq'd into it - thus original->masqr
would be set, that masqr would lost.
Likewise for the clonechan->masq.
(closes issue #16057;#17363)
Reported by: amorsen;davidw,alecdavis
Patches:
based on bug16057.diff4.txt uploaded by alecdavis (license 585)
Tested by: ramonpeek, davidw, alecdavis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287661 | alecdavis | 2010-09-21 10:21:50 +1200 (Tue, 21 Sep 2010) | 14 lines
ast_do_masquerade. Keep channels ao2_container locked while unlink and linking channels.
Previously, Masquerade would unlock 'original' and 'clonechan' and allow another masq thread to run.
End result would be corrupted memory, and the frequent report 'Bad Magic Number'.
(closes issue #17801,#17710)
Reported by: notthematrix
Patches:
Based on bug17801.diff1.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/928
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287647 | dvossel | 2010-09-20 17:09:16 -0500 (Mon, 20 Sep 2010) | 21 lines
Addition of the FrameHook API (AKA AwesomeHooks)
So far all our tools for viewing and manipulating media streams
within Asterisk have been entirely focused on audio. That made
sense then, but is not scalable now. The FrameHook API lets us
tap into and manipulate _ANY_ type of media or signaling passed
on a channel present today or in the future. This tool is a step
in the direction of expanding Asterisk's boundaries and will help
generate some rather interesting applications in the future.
In addition to the FrameHook API, a simple dialplan function
exercising the api has been included as well. This function
is called FRAME_TRACE(). FRAME_TRACE() allows for the internal
ast_frames read and written to a channel to be output. Filters
can be placed on this function to debug only certain types of frames.
This function could be thought of as an internal way of doing
ast_frame packet captures.
Review: https://reviewboard.asterisk.org/r/925/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286931 | jpeeler | 2010-09-15 14:22:15 -0500 (Wed, 15 Sep 2010) | 16 lines
Add parking extension for non-default parking lots.
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r286682 | mnicholson | 2010-09-14 13:04:21 -0500 (Tue, 14 Sep 2010) | 21 lines
Merged revisions 286681 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286681 | mnicholson | 2010-09-14 13:02:24 -0500 (Tue, 14 Sep 2010) | 14 lines
Merged revisions 286679 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286679 | mnicholson | 2010-09-14 13:00:01 -0500 (Tue, 14 Sep 2010) | 7 lines
Only drop duplicate answer frames if the channel is bridged.
Back in r3710 ast_read() was modified to drop answer frames on channels that were in the UP state. This modification prevented bridges that were up before the answer from being broken and reestablished by an ANSWER control frame. That change also prevents pickup of channels called from the ast_dial framework from working properly. The ast_dial framework expects to see an ANSWER frame after dialing and the pickup code queues one but ast_read() drops it. This new change only drops ANSWER frames when the channel is bridged, allowing the answer queued by the pickup code to properly pass through ast_read() on to the ast_dial framework.
ABE-2473
(related to issue #2342)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286112 | russell | 2010-09-10 15:31:58 -0500 (Fri, 10 Sep 2010) | 9 lines
Rate limit calls to fsync() to 1 per second after astdb updates.
Astdb was determined to be one of the most significant bottlenecks in SIP
registration processing. This patch improved the speed of an astdb load
test by 50000% (yes, Fifty-Thousand Percent). On this particular load test
setup, this doubled the number of SIP registrations the server could handle.
Review: https://reviewboard.asterisk.org/r/825/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284065 | russell | 2010-08-28 16:29:45 -0500 (Sat, 28 Aug 2010) | 13 lines
Be more flexible with whitespace on AMI action headers.
Previously, this code required exactly one space to be after the ':' in headers
for an AMI action. This now makes whitespace optional, and allows whitespace that
is there to vary in amount.
(closes issue #17862)
Reported by: cmoye
Patches:
manager.c.patch_trunk uploaded by cmoye (license 858)
manager.c.patch_1.8 uploaded by cmoye (license 858)
Tested by: cmoye
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r283230 | russell | 2010-08-23 08:23:12 -0500 (Mon, 23 Aug 2010) | 7 lines
Make the AST_CEL_AMA enum match up with the AST_CDR_ ama flag values.
Really, having 2 enums for this is silly and error prone, demonstrated by
the crash that I hit because there was an assumption in the code that the
values in each matched up. However, this is a quick fix to get them to
match up so it will work.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282468 | twilson | 2010-08-16 12:53:44 -0500 (Mon, 16 Aug 2010) | 30 lines
Merged revisions 282467 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282467 | twilson | 2010-08-16 12:32:01 -0500 (Mon, 16 Aug 2010) | 23 lines
Merged revisions 282430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282430 | twilson | 2010-08-16 12:06:37 -0500 (Mon, 16 Aug 2010) | 16 lines
Send a SRCCHANGE indication when we masquerade
Masquerading a channel means that the src of the audio is potentially
changing, so send a SRCCHANGE so that RTP-based media streams can get
a new SSRC generated to reflect the change. Original patch by addix
(along with lots of testing--thanks!).
(closes issue #17007)
Reported by: addix
Patches:
1001-reset-SSRC-original-channel.diff uploaded by addix (license 1006)
srcchange.diff uploaded by twilson (license 396)
Tested by: addix, twilson
Review: https://reviewboard.asterisk.org/r/862/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282098 | rmudgett | 2010-08-12 17:06:06 -0500 (Thu, 12 Aug 2010) | 7 lines
Separate call completion config parameter allocation and default initialization.
If you ever have a need to reset the call completion config parameters
to defaults, now you can.
And no Virginia, C++ idioms do not always work in C.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282099 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282047 | dvossel | 2010-08-12 15:15:41 -0500 (Thu, 12 Aug 2010) | 35 lines
improved translation paths for wideband codecs
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r281982 | russell | 2010-08-12 11:33:30 -0500 (Thu, 12 Aug 2010) | 5 lines
Remove debugging output from verbose messages.
Pointer values to internal objects is not terribly useful to users in the
verbose messages about adding extensions and contexts.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281913 | jpeeler | 2010-08-11 22:03:37 -0500 (Wed, 11 Aug 2010) | 34 lines
Merged revisions 281912 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r281912 | jpeeler | 2010-08-11 22:01:38 -0500 (Wed, 11 Aug 2010) | 27 lines
Merged revisions 281911 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r281911 | jpeeler | 2010-08-11 22:00:14 -0500 (Wed, 11 Aug 2010) | 20 lines
Ensure SSRC is changed when media source is changed to resolve audio delay.
This change causes the SSRC to change right before the channels are bridged,
which is what used to happen. It seems that fixes were made to attempt limiting
SSRC changes, targeted mainly at sending DTMF. DTMF is not affecting the SSRC
with this change.
There are two other control frames sent in ast_channel_bridge that probably
should also be changed to AST_CONTROL_SRCCHANGE as well, but I'm going to leave
this change up to the discretion of resolving issue #17007.
For reference - old review implementing new control frame SRCCHANGE:
https://reviewboard.asterisk.org/r/540
(closes issue #17404)
Reported by: sdolloff
Patches:
bug17404.patch uploaded by jpeeler (license 325)
Tested by: sdolloff
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281575 | russell | 2010-08-10 13:05:07 -0500 (Tue, 10 Aug 2010) | 16 lines
Merged revisions 281574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r281574 | russell | 2010-08-10 13:04:32 -0500 (Tue, 10 Aug 2010) | 9 lines
Don't move the time threshold for running scheduled events on every iteration.
Instead, only calculate the time threshold each time ast_sched_runq() is called.
(closes issue #17742)
Reported by: schmidts
Patches:
sched.c.patch uploaded by schmidts (license 1077)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281052 | russell | 2010-08-05 08:16:11 -0500 (Thu, 05 Aug 2010) | 16 lines
Merged revisions 281051 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r281051 | russell | 2010-08-05 08:11:32 -0500 (Thu, 05 Aug 2010) | 9 lines
Cleanup default option value handling for cdr.conf [general].
The default values would differ depending on whether or not cdr.conf exists.
That is no longer the case.
Apply a default value to the unanswered option.
Define all default values as named constants.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r280307 | mnicholson | 2010-07-29 08:56:35 -0500 (Thu, 29 Jul 2010) | 11 lines
Merged revisions 280306 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r280306 | mnicholson | 2010-07-29 08:45:11 -0500 (Thu, 29 Jul 2010) | 2 lines
Implement support for ast_channel_queryoption on local channels. Currently only AST_OPTION_T38_STATE is supported.
ABE-2229
Review: https://reviewboard.asterisk.org/r/813/
........
Additionally, pass AST_CONTROL_T38_PARAMETERS control frames through generic bridges. This change appears to have been unintentionally left out of rev 203699.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279949 | dvossel | 2010-07-27 15:57:00 -0500 (Tue, 27 Jul 2010) | 31 lines
Merged revisions 279946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279946 | dvossel | 2010-07-27 15:54:32 -0500 (Tue, 27 Jul 2010) | 24 lines
Merged revisions 279945 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279945 | dvossel | 2010-07-27 15:33:40 -0500 (Tue, 27 Jul 2010) | 19 lines
remove empty audiohook write list on channel
If a channel has an audiohook write list created on it, that
list stays on the channel until the channel is destroyed. There
is no reason to keep that list on the channel if it becomes empty.
If it is empty that just means we are doing needless translating
for every ast_read and ast_write. This patch removes the audiohook
list from the channel once it is detected to be empty on either a
read or write. If a audiohook is added back to the channel after
this list is destroyed, the list just gets recreated as if it never
existed to begin with.
(closes issue #17630)
Reported by: manvirr
Review: https://reviewboard.asterisk.org/r/799/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In particular, Solaris and perhaps others do not support the above mentioned
GNU extension. In this case the paths are simply expanded without the braces
and the calls to glob are made separately.
Note: I could not explain memory allocation failures that were being reported
from within libxml itself when making calls to glob without using GLOB_NOCHECK.
This is the only reason why that flag is being used.
(closes issue #15402)
Reported by: snuffy
Patches:
bug_xmlpatt-v3.diff uploaded by snuffy (license 35),
modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r278618 | mmichelson | 2010-07-22 09:55:04 -0500 (Thu, 22 Jul 2010) | 13 lines
Allow PLC to function properly when channels use SLIN for audio.
If a channel involved in a bridge was using SLIN audio, then translation
paths were not guaranteed to be set up properly since in all likelihood
the number of translation steps was only 1.
This patch enforces the transcode_via_slin behavior if transcode_via_slin
or generic_plc is enabled and one of the formats to make compatible is
SLIN.
AST-352
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for this option did not match the code. Fix that along with
some minor cleanups to the code along the way. Document a slight change in
behavior (to something that was previously undocumented) in UPGRADE.txt.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277906 | jeang | 2010-07-19 15:16:36 -0500 (Mon, 19 Jul 2010) | 7 lines
Avoid trying to pickup a parked extension before the park operation is completed.
A crash could occur if the extension is picked up while the parking extension is
being announced. Testing pu->notquiteyet while searching for a parked extension
resolves this crash.
(ABE-2418)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277625 | tringenbach | 2010-07-16 17:43:39 -0500 (Fri, 16 Jul 2010) | 9 lines
Save and restore AST_FLAG_BRIDGE_HANGUP_DONT on attended transfer.
ast_bridge_call() clears AST_FLAG_BRIDGE_HANGUP_DONT. But during an attended
transfer, ast_bridge_call() is called for a second bridge on the same channel,
and it clears that flag, which still needs to get set for when the original
ast_bridge_call() gets control back and checks it.
Review: https://reviewboard.asterisk.org/r/741
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277247 | mnicholson | 2010-07-16 12:29:57 -0500 (Fri, 16 Jul 2010) | 4 lines
For pass through DTMF tones, measure the actual duration between the begin and end packets on the wire. If it is detected to be less than AST_MIN_DTMF_DURATION, trigger dtmf emulation.
AST-362
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275994 | russell | 2010-07-13 11:51:18 -0500 (Tue, 13 Jul 2010) | 14 lines
Access peer->cdr directly instead of through a saved off reference.
At this point in the code, it is possible that peer_cdr may be invalid.
Specifically, in the blind transfer code, CDRs are swapped between channels.
So, peer_cdr is no longer == peer->cdr.
The scenario that exposed a crash in this code was a blind transfer that hit
the system call limit, causing the transferee channel to get destroyed after
the transfer attempt failed. Even if it succeeds and this code doesn't crash,
this code was still trying to reset a CDR on a channel that was now owned by
a different thread, which is a BadThing(tm).
(ABE-2417)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275665 | jpeeler | 2010-07-12 11:58:39 -0500 (Mon, 12 Jul 2010) | 11 lines
Change ast_write to not stop generator when called from ast_prod.
For SIP channels configured with the progressinband option on, the ringback was
being immediately stopped. This problem was due to ast_prod being moved for a
deadlock fix in 259858. Prodding the channel after setting up the generator
triggered the check in ast_write to stop the generator. The fix here should
write the frame the same as was done before the call to ast_prod was moved.
(closes issue #17372)
Reported by: tech_admin
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge handling code did not properly consider feature groups when setting
parameters that would affect whether or not a native bridge would be attempted.
If DYNAMIC_FEATURES only include a feature group, a native bridge would occur
that may prevent features from working.
Fix a bug in verbose output that would show the key mapping as empty if it was
using the default mapping and not a custom mapping in the feature group.
Add feature groups to the output of "features show".
Adjust the feature execution logic to match that of the logic when executing
a feature that was not configured through a feature group.
Update features.conf.sample to show that an '=' is still required if using
the default key mapping from [applicationmap].
Finally, clean up a little bit of formatting to better coform to coding
guidelines while in the area.
(closes issue #17589)
Reported by: lmadsen
Patches:
issue_17589.rev4.txt uploaded by russell (license 2)
Tested by: russell, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
warning (at least with gcc 4.4.4):
netsock2.c:492: warning: dereferencing pointer ‘({anonymous})’ does break strict-aliasing rules
So we're back to using memcpy()...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273565 | russell | 2010-07-01 17:09:19 -0500 (Thu, 01 Jul 2010) | 7 lines
Don't return a partially initialized datastore.
If memory allocation fails in ast_strdup(), don't return a partially
initialized datastore. Bad things may happen.
(related to ABE-2415)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Otherwise, it goes to all manager sessions and may exclude the current session,
if the Events mask excludes it.
(closes issue #17504)
Reported by: rrb3942
Patches:
showdialplan_patch.diff uploaded by rrb3942 (license 1003)
Tested by: rrb3942
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a ref count leak in event filters and checks for
a filter container allocation failure during session creation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch as documented in the sample config allows one to optionally apply
white, black, or both types of filtering to manager events. The new
'eventfilter' option is set per user.
(closes issue #14861)
Reported by: fnordian
Patches:
eventfilter3.patch uploaded by fnordian (license 110),
modified by me
Review: https://reviewboard.asterisk.org/r/673/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If both the transferer and transferee of a attended transfer hangup before
the new channel picks up, the new channel should be hung up as well as it
has no endpoint to talk to. This mirrors the expected behavior used in 1.4.
(closes issue #17444)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If there is a problem with a firmware file, Polycom phones will close the
connection. We were continuing to send the file anyway. There should be no
reason to continue sending a file if there is an error writing it.
(closes issue #16682)
Reported by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269821 | mmichelson | 2010-06-10 14:30:12 -0500 (Thu, 10 Jun 2010) | 19 lines
Fix potential crash when writing raw SLIN audio on a PLC-enabled channel.
The issue here was that the frame created when adjusting for PLC had no offset
to its audio data. If this frame were translated to another format prior to
being sent out an RTP socket, all went well because the translation code would
put an appropriate offset into the frame. However, if the SLIN audio were not
translated before being sent out the RTP socket, bad things would happen.
Specifically, the ast_rtp_raw_write makes the assumption that the frame has
at least enough of an offset that it can accommodate an RTP header. This was
not the case. As such, data was being written prior to the allocation, likely
corrupting the data the memory allocator had written. Thus when the time came
to free the data, all hell broke loose. ....Well, Asterisk crashed at least.
The fix was just what one would expect. Offset the data in the frame by a reasonable
amount. The method I used is a bit odd since the data in the frame is 16 bit integers
and not bytes. I left a big ol' comment about it. This can be improved on if someone
is interested. I was more interested in getting the crash resolved.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind pointed out that attempting to get an IE value from an event that has
no IEs produces an invalid memory read past the end of the event. Thanks to
mmichelson for pointing the problem out to me and then testing the fix.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269334 | pabelanger | 2010-06-09 13:24:53 -0400 (Wed, 09 Jun 2010) | 12 lines
Fix Debian init script to not use -c.
When using the init script as-is currently, it could cause issues on Debian
such as high CPU usage. This fix has worked for several people so I'm
implementing the change. We now handle color displays properly.
(closes issue #16784)
Reported by: pabelanger
Patches:
20100530__issue16784__2.diff.txt uploaded by tilghman (license 14)
Tested by: pabelanger, tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Suppress the warning about unexpected control subclass frames for
AST_CONTROL_CONNECTED_LINE, AST_CONTROL_REDIRECTING, and AST_CONTROL_AOC
in file.c:waitstream_core().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What I did not originally see in my previous commit was that even though the
next digit could be detected before the previous was considered ended, the
detection of the next digit effectively ends the detection of the previous.
Therefore, the length moves in lockstep with the digit, and no separate counter
is needed for the length alone.
(closes issue #17371)
Reported by: alecdavis
(closes issue #17474)
Reported by: kenner
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ASTCFLAGS was specified with the make command, Makefile.rules was using
the specified value from the command line and not the one here, making it so this
flag would go missing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Actions (or failures to act) by external clients should not cause memory leaks
in Asterisk, especially when those continued leaks could cause Asterisk to
misbehave later.
(closes issue #17234)
Reported by: mav3rick
Patches:
20100510__issue17234.diff.txt uploaded by tilghman (license 14)
20100517__issue17234__trunk.diff.txt uploaded by tilghman (license 14)
Tested by: mav3rick, davidw
(closes issue #17365)
Reported by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266585 | tilghman | 2010-06-01 10:17:46 -0500 (Tue, 01 Jun 2010) | 11 lines
Prevent CLI prompt from distorting output of lines shorter than the prompt.
Uses the VT100 method of clearing the line from the cursor position to the
end of the line: Esc-0K
(closes issue #17160)
Reported by: coolmig
Patches:
20100531__issue17160.diff.txt uploaded by tilghman (license 14)
Tested by: coolmig
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266142 | tilghman | 2010-05-26 16:11:44 -0500 (Wed, 26 May 2010) | 14 lines
Use sigaction for signals which should persist past the initial trigger, not signal.
If you call signal() in a Solaris signal handler, instead of just resetting
the signal handler, it causes the signal to refire, because the signal is not
marked as handled prior to the signal handler being called. This effectively
causes Solaris to immediately exceed the threadstack in recursive signal
handlers and crash.
(closes issue #17000)
Reported by: rmcgilvr
Patches:
20100526__issue17000.diff.txt uploaded by tilghman (license 14)
Tested by: rmcgilvr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch breaks up every part of the sip registry string during
config parsing and removes all parsing from transmit_register().
Thanks to Nick_Lewis for contributing this patch!
(closes issue #14331)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domparse.patch uploaded by Nick Lewis (license 657)
chan_sip.c.patch uploaded by Nick Lewis (license 657)
chan_sip.c.domainparse3.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse4.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse5.patch uploaded by Nick Lewis (license 657)
nicklewispatch.diff uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
Review: https://reviewboard.asterisk.org/r/628/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The handling of the control subclass AST_CONTROL_READ_ACTION frame leaked
connected line string memory in __ast_read().
Also in __ast_read() the frame type switch should not have had a case for
AST_CONTROL_READ_ACTION. AST_CONTROL_READ_ACTION is not a frame type.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
__ast_channel_alloc_ap() has several points in the initialization of a new
channel structure where it could fail. Since the channel structure is now
an ao2 object, the destructor callback needs to be able to handle clean up
when the structure setup is incomplete.
Problems corrected:
1) Failing to setup the alertpipe would not unreference the structure but
free it directly. Doing this to an ao2_object is very bad.
2) File descriptors need to be initialized to -1 before a construction
failure could occur so the destructor will not close unopened descriptors.
3) The destructor needs to check that the string field has been
initialized before using any string field values. Crashes expected.
4) The destructor should not notify devstate if the device name is empty.
It is a waste of cycles and a couple ERROR log messages are generated.
Review: https://reviewboard.asterisk.org/r/675/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264996 | mmichelson | 2010-05-21 11:28:34 -0500 (Fri, 21 May 2010) | 32 lines
Allow ast_safe_sleep to defer specific frames until after the sleep has concluded.
From reviewboard
Background:
A Digium customer discovered a somewhat odd bug. The setup is that parties A
and B are bridged, and party A places party B on hold. While party B is
listening to hold music, he mashes a bunch of DTMF. Party A takes party
B off hold while this is happening, but party B continues to hear hold
music. I could reproduce this about 1 in 5 times.
The issue:
When DTMF features are enabled and a user presses keys, the channel that
the DTMF is streamed to is placed in an ast_safe_sleep for 100 ms, the
duration of the emulated tone. If an AST_CONTROL_UNHOLD frame is read
from the channel during the sleep, the frame is dropped. Thus the
unhold indication is never made to the channel that was originally placed
on hold.
The fix:
Originally, I discussed with Kevin possible ways of fixing the specific
problem reported. However, we determined that the same type of problem
could happen in other situations where ast_safe_sleep() is used. Using
autoservice as a model, I modified ast_safe_sleep_conditional() to
defer specific frame types so they can be re-queued once the sleep has
finished. I made a common function for determining if a frame should
be deferred so that there are not two identical switch blocks to
maintain.
Review: https://reviewboard.asterisk.org/r/674/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264820 | rmudgett | 2010-05-20 18:23:21 -0500 (Thu, 20 May 2010) | 6 lines
ast_callerid_parse() had a path that left name uninitialized.
Several callers of ast_callerid_parse() do not initialize the name
parameter before calling thus there is the potential to use an
uninitialized pointer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Nick Lewis pointed out that the patch as committed wouldn't actually include
dynamic logger levels, which was missed by the other reviewers. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
The problem here is a bit complex, so try to bear with me...
It was noticed by a Digium customer that generic PLC (as configured in
codecs.conf) did not appear to actually be having any sort of benefit when
packet loss was introduced on an RTP stream. I reproduced this issue myself
by streaming a file across an RTP stream and dropping approx. 5% of the
RTP packets. I saw no real difference between when PLC was enabled or disabled
when using wireshark to analyze the RTP streams.
After analyzing what was going on, it became clear that one of the problems
faced was that when running my tests, the translation paths were being set
up in such a way that PLC could not possibly work as expected. To illustrate,
if packets are lost on channel A's read stream, then we expect that PLC will
be applied to channel B's write stream. The problem is that generic PLC can
only be done when there is a translation path that moves from some codec to
SLINEAR. When I would run my tests, I found that every single time, read
and write translation paths would be set up on channel A instead of channel
B. There appeared to be no real way to predict which channel the translation
paths would be set up on.
This is where Kevin swooped in to let me know about the transcode_via_sln
option in asterisk.conf. It is supposed to work by placing a read translation
path on both channels from the channel's rawreadformat to SLINEAR. It also
will place a write translation path on both channels from SLINEAR to the
channel's rawwriteformat. Using this option allows one to predictably set up
translation paths on all channels. There are two problems with this, though.
First and foremost, the transcode_via_sln option did not appear to be working
properly when I was placing a SIP call between two endpoints which did not
share any common formats. Second, even if this option were to work, for PLC
to be applied, there had to be a write translation path that would go from
some format to SLINEAR. It would not work properly if the starting format
of translation was SLINEAR.
The one-line change presented in this review request in chan_sip.c fixed the
first issue for me. The problem was that in sip_request_call, the
jointcapability of the outbound channel was being set to the format passed to
sip_request_call. This is nativeformats of the inbound channel. Because of this,
when ast_channel_make_compatible was called by app_dial, both channels already
had compatibly read and write formats. Thus, no translation path was set up at
the time. My change is to set the jointcapability of the sip_pvt created during
sip_request_call to the intersection of the inbound channel's nativeformats and
the configured peer capability that we determined during the earlier call to
create_addr. Doing this got the translation paths set up as expected when using
transcode_via_sln.
The changes presented in channel.c fixed the second issue for me. First and
foremost, when Asterisk is started, we'll read codecs.conf to see the value of
the genericplc option. If this option is set, and ast_write is called for a
frame with no data, then we will attempt to fill in the missing samples for
the frame. The implementation uses a channel datastore for maintaining the
PLC state and for creating a buffer to store PLC samples in. Even when we
receive a frame with data, we'll call plc_rx so that the PLC state will have
knowledge of the previous voice frame, which it can use as a basis for when
it comes time to actually do a PLC fill-in.
So, reviewers, now I ask for your help. First off, there's the one line change
in chan_sip that I have put in. Is it right? By my logic it seems correct, but
I'm sure someone can tell me why it is not going to work. This is probably the
change I'm least concerned about, though. What concerns me much more is the
set of changes in channel.c. First off, am I even doing it right? When I run
tests, I can clearly see that when PLC is activated, I see a significant increase
in RTP traffic where I would expect it to be. However, in my humble opinion, the
audio sounds kind of crappy whenever the PLC fill-in is done. It sounds worse to
me than when no PLC is used at all. I need someone to review the logic I have used
to be sure that I'm not misusing anything. As far as I can see my pointer arithmetic
is correct, and my use of AST_FRIENDLY_OFFSET should be correct as well, but I'm
sure someone can point out somewhere where I've done something incorrectly.
As I was writing this review request up, I decided to give the code a test run under
valgrind, and I find that for some reason, calls to plc_rx are causing some invalid
reads. Apparently I'm reading past the end of a buffer somehow. I'll have to dig around
a bit to see why that is the case. If it's obvious to someone reviewing, speak up!
Finally, I have one other proposal that is not reflected in my code review. Since
without transcode_via_sln set, one cannot predict or control where a translation
path will be up, it seems to me that the current practice of using PLC only when
transcoding to SLINEAR is not useful. I recommend that once it has been determined
that the method used in this code review is correct and works as expected, then
the code in translate.c that invokes PLC should be removed.
Review: https://reviewboard.asterisk.org/r/622/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When decode_length returns the length there is a check to see if that
length is negative, if so the decode loop breaks as this means the
limit has been reached. The problem here is that length is an
unsigned int, so length can never be negative. This resulted in
an infinite loop.
(issue #17352)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #17235)
Reported by: frawd
Patches:
new_dtmf_dsp_len.patch uploaded by frawd (license 610)
20100518__issue17235.diff.txt uploaded by tilghman (license 14)
Tested by: frawd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264204 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now that Asterisk modules can dynamically create and destroy logger levels
on demand, it's useful to be able to configure a logger channel (console,
file, whatever) to be able to accept log messages from *all* levels, even
levels created dynamically. This patch adds support for this, by allowing
the '*' level name to be used in logger.conf.
Review: https://reviewboard.asterisk.org/r/663/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264160 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the keyword 'all' to the 'channel hangup request' CLI command
so that you can request all channels to be hungup without having to
restart Asterisk.
(closes issue #16009)
Reported by: moy
Patches:
hangup-all-rev-221688.patch uploaded by moy (license 222)
Tested by: moy, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263949 | tilghman | 2010-05-19 01:32:27 -0500 (Wed, 19 May 2010) | 8 lines
Because progress is called multiple times, across several frames, we must persist states when detecting multitone sequences.
(closes issue #16749)
Reported by: dant
Patches:
dsp.c-bug16749-1.patch uploaded by dant (license 670)
Tested by: dant
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263639 | mmichelson | 2010-05-17 17:00:28 -0500 (Mon, 17 May 2010) | 10 lines
Fix logic error when checking for a devstate provider.
When using strsep, if one of the list of specified separators is not found,
it is the first parameter to strsep which is now NULL, not the pointer returned
by strsep.
This issue isn't especially severe in that the worst it is likely to do is waste
some cycles when a device with no '/' and no ':' is passed to ast_device_state.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright pointed out that we lost a set of newline characters in commit
190349 on a line I had recently changed. Yay for code review on commits.
(issue #17231, #10961)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263456 | lmadsen | 2010-05-17 09:35:18 -0500 (Mon, 17 May 2010) | 11 lines
Manager cookies are not compatible with RFC2109.
The Version field in the cookies we're setting contain quotes around the version
number which is not compatible with RFC2109 and breaks some implementations.
(closes issue #17231)
Reported by: ecarruda
Patches:
manager_rfc2109-trunk-v1.patch uploaded by ecarruda (license 559)
manager_rfc2109-1.6.2-v1.patch uploaded by ecarruda (license 559)
Tested by: ecarruda, russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As pointed out by 'akshayb' on #asterisk-dev, the code here called a list of
bucket entries a 'bucket', and the entries within the bucket were called
'bucket_list'. This made the code very hard to understand without reading
all of it... so I've renamed 'bucket_list' to 'bucket_entry' to clarify the
purpose of the structure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This bug surfaced in 1.6.2 and does not affect code in any other released
version of Asterisk. It manifested itself as SIP qualify not happening when
it should, causing peers to go unreachable. This was debugged down to scheduler
entries sometimes not getting executed when they were supposed to, which was in
turn caused by an error in the heap code.
The problem only sometimes occurs, and it is due to the logic for removing an entry
in the heap from an arbitrary location (not just popping off the top). The scheduler
performs this operation frequently when entries are removed before they run (when
ast_sched_del() is used).
In a normal pop off of the top of the heap, a node is taken off the bottom,
placed at the top, and then bubbled down until the max heap property is restored
(see max_heapify()). This same logic was used for removing an arbitrary node
from the middle of the heap. Unfortunately, that logic is full of fail. This
patch fixes that by fully restoring the max heap property when a node is thrown
into the middle of the heap. Instead of just pushing it down as appropriate, it
first pushes it up as high as it will go, and _then_ pushes it down.
Lastly, fix a minor problem in ast_heap_verify(), which is only used for
debugging. If a parent and child node have the same value, that is not an
error. The only error is if a parent's value is less than its children.
A huge thanks goes out to cappucinoking for debugging this down to the scheduler,
and then producing an ast_heap test case that demonstrated the breakage. That
made it very easy for me to focus on the heap logic and produce a fix. Open source
projects are awesome.
(closes issue #16936)
Reported by: ib2
Tested by: cappucinoking, crjw
(closes issue #17277)
Reported by: cappucinoking
Patches:
heap-fix.rev2.diff uploaded by russell (license 2)
Tested by: cappucinoking, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261496 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r261093 | tilghman | 2010-05-04 18:36:53 -0500 (Tue, 04 May 2010) | 7 lines
Protect against overflow, when calculating how long to wait for a frame.
(closes issue #17128)
Reported by: under
Patches:
d.diff uploaded by under (license 914)
........
r261094 | tilghman | 2010-05-04 18:47:08 -0500 (Tue, 04 May 2010) | 2 lines
Add a tiny corner case to the previous commit
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261095 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have some functions inside the AstData API to get the tree
in XML form, but it is not required at the moment to compile
asterisk and we can disable that part of the API if we don't have
libxml2 support.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This saves time, when, even though the system allows the process limit to be
that high, the practical limit is much lower. Also introduce an additional
optimization, in the form of using the CLOEXEC flag to close descriptors at
the right time.
(closes issue #17223)
Reported by: dbackeberg
Patches:
20100423__issue17223.diff.txt uploaded by tilghman (license 14)
Tested by: dbackeberg
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r260049 | dvossel | 2010-04-29 10:31:02 -0500 (Thu, 29 Apr 2010) | 14 lines
Fixes crash in audiohook_write_list
The middle_frame in the audiohook_write_list function was
being freed if a audiohook manipulator returned a failure.
This is incorrect logic. This patch resolves this and
adds detailed descriptions of how this function should work
and why manipulator failures must be ignored.
(closes issue #17052)
Reported by: dvossel
Tested by: dvossel
(closes issue #16196)
Reported by: atis
Review: https://reviewboard.asterisk.org/r/623/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259858 | dvossel | 2010-04-28 16:16:03 -0500 (Wed, 28 Apr 2010) | 33 lines
resolves deadlocks in chan_local
Issue_1.
In the local_hangup() 3 locks must be held at the same time... pvt, pvt->chan,
and pvt->owner. Proper deadlock avoidance is done when the channel to hangup
is the outbound chan_local channel, but when it is not the outbound channel we
have an issue... We attempt to do deadlock avoidance only on the tech pvt, when
both the tech pvt and the pvt->owner are locked coming into that loop. By
never giving up the pvt->owner channel deadlock avoidance is not entirely possible.
This patch resolves that by doing deadlock avoidance on both the pvt->owner and the pvt
when trying to get the pvt->chan lock.
Issue_2.
ast_prod() is used in ast_activate_generator() to queue a frame on the channel
and make the channel's read function get called. This function is used in
ast_activate_generator() while the channel is locked, which mean's the channel
will have a lock both from the generator code and the frame_queue code by the
time it gets to chan_local.c's local_queue_frame code... local_queue_frame
contains some of the same crazy deadlock avoidance that local_hangup requires,
and this recursive lock prevents that deadlock avoidance from happening correctly.
This patch removes ast_prod() from the channel lock so only one lock is held during
the local_queue_frame function.
(closes issue #17185)
Reported by: schmoozecom
Patches:
issue_17185_v1.diff uploaded by dvossel (license 671)
issue_17185_v2.diff uploaded by dvossel (license 671)
Tested by: schmoozecom, GameGamer43
Review: https://reviewboard.asterisk.org/r/631/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
autoconf2.13 couldn't handle AC_PROG_GREP, so I removed it. This is fine,
since we don't need to use anything that the configure script doesn't.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259018 | mmichelson | 2010-04-26 16:03:08 -0500 (Mon, 26 Apr 2010) | 13 lines
Prevent Newchannel manager events for dummy channels.
No Newchannel manager event will be fired for channels that are
allocated to not match a registered technology type. Thus bogus
channels allocated solely for variable substitution or CDR
operations do not result in a Newchannel event.
(closes issue #16957)
Reported by: atis
Review: https://reviewboard.asterisk.org/r/601
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193391 | mnicholson | 2009-05-08 16:01:25 -0500 (Fri, 08 May 2009) | 8 lines
Set the proper disposition on originated calls.
(closes issue #14167)
Reported by: jpt
Patches:
call-file-missing-cdr2.diff uploaded by mnicholson (license 96)
Tested by: dlotina, rmartinez, mnicholson
........
r258670 | mnicholson | 2010-04-22 16:49:07 -0500 (Thu, 22 Apr 2010) | 11 lines
Fix broken CDR behavior.
This change allows a CDR record previously marked with disposition ANSWERED to be set as BUSY or NO ANSWER.
Additionally this change partially reverts r235635 and does not set the AST_CDR_FLAG_ORIGINATED flag on CDRs generated from ast_call(). To preserve proper CDR behavior, the AST_CDR_FLAG_DIALED flag is now cleared from all brige CDRs in ast_bridge_call().
(closes issue #16797)
Reported by: VarnishedOtter
Tested by: mnicholson
........
(closes issue #16222)
Reported by: telles
Tested by: mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces another test in test_event.c that exercises most of the
subscription related ast_event API calls. I made some minor additions to the
existing event allocation test to increase API coverage by the test code.
Finally, I made a list in a comment of API calls not yet touched by the test
module as a to-do list for future test development.
During the development of this test code, I discovered a number of bugs in
the event API.
1) subscriptions to AST_EVENT_ALL were not handled appropriately in a couple
of different places. The API allows a subscription to all event types,
but with IE parameters, just as if it was a subscription to a specific
event type. However, the parameters were being ignored. This affected
ast_event_check_subscriber() and event distribution to subscribers.
2) Some of the logic in ast_event_check_subscriber() for checking subscriptions
against query parameters was wrong.
Review: https://reviewboard.asterisk.org/r/617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"Bad Things" would happen if Asterisk was compiled with DEBUG_THREADS, but a
loaded module was not (or vice versa). This also immensely simplifies the
lock code, since there are no longer 2 separate versions of them.
Review: https://reviewboard.asterisk.org/r/508/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were many changes in revision 176627 which would avoid the error that a
missing config would have caused. Other than this, there are no other config
files (including asterisk.conf, surprisingly) that are required.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Because res/res_features.c was removed and main/cdr.c added, these changes
didn't make it to trunk and the 1.6.x branches
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Application arguments within the feature map could possibly contain a comma,
which conflicts with the syntax of the features.conf configuration file. This
patch allows the argument to be wrapped in parentheses or quoted, to allow the
application arguments to be interpreted as a single configuration parameter.
(closes issue #16646)
Reported by: pinga-fogo
Patches:
20100414__issue16646.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257070 | mnicholson | 2010-04-13 11:46:30 -0500 (Tue, 13 Apr 2010) | 9 lines
Add an option to restore past broken behavor of the Events manager action
Before r238915, certain values for the EventMask parameter of the Events action would result in no response being returned. This patch adds an option to restore that broken behavior. Also while fixing this bug I discovered that passing an empty EventMasks parameter would also result in no response being returned, this has been fixed as well while being preserved when the broken behavior is requested.
(closes issue #17023)
Reported by: nblasgen
Review: https://reviewboard.asterisk.org/r/602/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, the situation would happen when multiple
callers would request CC for a single generically-monitored
device. If the monitored device became available but the
caller did not answer the recall, then there was nothing
that would poke the CC core to let it know that it should
attempt to recall someone else instead.
After careful consideration, I came to the conclusion that
the only area of Asterisk that needed to be touched was the
generic CC monitor. All other types of CC would require something
outside of Asterisk to invoke a recall for a separate device.
This was accomplished by changing the generic monitor destructor
to poke other generic monitor instances if the device is currently
available and the specific instance was currently not suspended.
In order to not accidentally trigger recalls at bad times, the
fit_for_recall flag was also added to the generic_monitor_instance_list
struct. This gets set as soon as a monitored device becomes available.
It gets cleared if a CCNR request triggers the creation of a new
generic monitor instance. By doing this, we don't accidentally try
to recall a device when the monitored device was being monitored
for CCNR and never actually became available for recall in the first
place.
This error was discovered by Steve Pitts during in-house testing
at Digium.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Review Board:
There are two interrelated changes here.
First, there is the introduction of func_srv. This adds two new read-only
dialplan functions, SRVQUERY and SRVRESULT. They work very similarly to the
ENUMQUERY and ENUMRESULT functions, except that this allows one to query SRV
records instead. In order to facilitate this work, I added a couple of new API
calls to srv.h. ast_srv_get_record_count tells the number of records returned
by an SRV lookup. This number is calculated at the time of the SRV lookup.
ast_srv_get_nth_record allows one to get a numbered SRV record.
Second, there is the modification to chan_sip that allows one to specify a
hostname or IP address (along with a port) to send an outgoing INVITE to when
dialing a SIP peer. This goes hand-in-hand with func_srv. You can query SRV
records and then use the host and port from the results to dial via a specific
host instead of what is configured in sip.conf.
Review: https://reviewboard.asterisk.org/r/608
SWP-1200
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256485 65c4cc65-6c06-0410-ace0-fbb531ad65f3