Add Asterisk Device State information and callbacks to the Call Completion
Supplemental Services for generic agents.
There are currently not many devices that have native support for CCSS.
Even as the devices become available there may be other reasons why one
may choose to not take advantage of the native abilities and stick with
the generic implementation. The generic implementation is quite capable
and could be greatly enhanced by adding device state capabilities. A
phone could then subscribe to the device state with a BLF key in
conjunction with Asterisk hints.
The advantages of the device state information would allow a single button
to: request CCSS, cancel a CCSS request, and display the current state of
a CCSS request.
For example, you may have a single button that when not lit, there is no
active CCSS request. When you press that button, the dialplan can query
the DEVICE_STATE() associated with that caller to determine whether they
should be calling CallCompletionRequest() or CallCompletionCancel(). If
there is currently a pending request, then the dialplan would cancel it.
This also has the advantage of showing the true state of a request, which
is an asynchronous call, even when CallCompletionRequest() thinks it was
successful. The actual request could ultimately fail. Once lit, further
feedback can be provided to the caller about the current state of their
request since it will be updated by the CCSS State Machine as appropriate.
The DEVICE_STATE mapping is configurable since the BLF being used on a
given phone type may vary. The idea is to allow some level of
customization as to the phone's behavior.
As an example, you may want the BLF key to go solid once you have
requested a callback. You may then want the LED to blink (typically
ringing) when either the callback is in process, which is a visual
indication that the incoming call is the desired callback. You may want
it to blink when the callee is ready but you are busy, giving you a visual
indication that the target is available as you may want to get off the
line so that the callback can be successful.
Device state information is sent back via the ast_devstate_prov_add()
callback for any generic CCSS device as it traverses through the state
machine. You simply provide a map between CC_STATE values and the
corresponding AST_DEVICE state values.
You could then generate hints against these states similar to what is
possible today with Custom Devstates or MeetMe states. For example, you
may have an extension 3000 that is currently associated with device
SIP/3000. You could then create a feature code for that extension that
may look something like:
exten => *823000,hint,ccss:sip/3000
You would then subscribe a BLF button to *823000 which would point to the
dialplan that handled CCSS requests/cancels using the available
DEVICE_STATE() information about ccss:sip/3000 to make the decision about
what to do.
(closes issue #18788)
Reported by: p_lindheimer
Patches:
ccss.trunk.18788.patch uploaded by p lindheimer (license 558)
Modified with final reviewboard comments.
Tested by: p_lindheimer, loloski
Review: https://reviewboard.asterisk.org/r/1105/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding the setvar option with variable substitution on the value allows things
like setting the outbound caller id name to the summary of a calendar event,
etc. Values could be chained together as they are appended in order to do some
scripting if necessary.
Review: https://reviewboard.asterisk.org/r/1134/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r305247 | qwell | 2011-01-31 16:25:23 -0600 (Mon, 31 Jan 2011) | 7 lines
Add alternative name for config option.
The SIP sample configuration had "tlscadir" as the option name, but chan_sip
used the more correct "tlscapath". Now both are accepted.
Discovered (sort of) by a user on IRC in #asterisk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303009 | jpeeler | 2011-01-20 11:10:32 -0600 (Thu, 20 Jan 2011) | 21 lines
Merged revisions 303008 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303008 | jpeeler | 2011-01-20 11:07:44 -0600 (Thu, 20 Jan 2011) | 14 lines
Merged revisions 303007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303007 | jpeeler | 2011-01-20 11:04:08 -0600 (Thu, 20 Jan 2011) | 8 lines
Add new queue strategy to preserve behavior for when queue members moved to ao2.
Add queue strategy called "rrordered" to mimic old behavior from when queue
members were stored in a linked list.
ABE-2707
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the moh_signaling option to specify what to do when the channel's
bridged peer puts the ISDN channel on and off of hold.
Implemented as a FSM to control libpri ISDN signaling when the bridged
peer places the channel on and off of hold with the AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD control frames.
JIRA SWP-2687
JIRA ABE-2691
Review: https://reviewboard.asterisk.org/r/1063/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292050 | tzafrir | 2010-10-16 12:47:00 +0200 (ש', 16 אוק 2010) | 22 lines
Merged revisions 292049 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292049 | tzafrir | 2010-10-16 12:03:04 +0200 (ש', 16 אוק 2010) | 15 lines
Base directory for MOH should be ASTDATADIR
If the directive 'directory' is relative, make it relative to the
datadir, rather than to the varlibdir. In the sample configuration
it is relative ('moh').
This has no effect unless you have actively set the datadir explicitly
(at build time or at run time).
(closes issue #16906)
Patches:
moh_datadir uploaded by tzafrir (license 46)
Review: https://reviewboard.asterisk.org/r/974/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291192 | dvossel | 2010-10-11 16:38:39 -0500 (Mon, 11 Oct 2010) | 19 lines
Gtalk enhancements and general code cleanup.
This patch includes several chan_gtalk enhancements.
Two new gtalk.conf options have been added, externip
and stunadd. Setting externip allows us to
manually specify what the external IP address is
outside of a NAT environment. Setting the stunaddr
option to a valid stun server allows for that external
ip to be retrieved via a STUN server automatically. This
external IP is then advertised during call setup as
a possible candidate.
I have also attempted to clean up chan_gtalk's code
so it meets our coding guidelines. During this cleanup
I noticed several things that need to be done in the
code and made a TODO section at the top of the file.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Leif Madsen
Matthew Nicholson
Tilghman Lesher
Alec L Davis
Mark Michelson
Terry Wilson
David Vossel
Andrew Latham
Jason Parker
Sean Bright
Jeff Peeler
Paul Belanger
Brad Watkins
Tzafrir Cohen
Erin Spiceland